AUCTION SALEHollywood Tans | 11 Enterprise Court, Sewell, New Jersey 08080 22 Ton Amada “Vipros...

Auction DAte: WeDnesDAy, october 22nD, 2008, stArting At 10:30 A.m.InspectIon Dates: tuesDay, october 21st, 2008 from 8:00 a.m. to 4:00 p.m. anD mornIng of sale

AUCTION SALE

With BIDSPOTTER.COM you can bid on items in auctions from anywhere in the world! To register to bid in this Koster Industries Inc. auction, please visit us at www.bidspotter.com

Assets No Longer Required to the Continuing Operations of

HT MANUFACTURING, LLCHollywood Tans | 11 Enterprise Court, Sewell, New Jersey 08080

22 Ton Amada “Vipros 2510 King” Turret Punch

Andi “Stratus/Sup” CNC Router

22 Ton Amada “Apelio III” 2510V Laser/Punch, Low Hours!!

Holzma Mdl. OPT-HPP-350/31/31

Front Loading CNC Panel Saw

88 Ton Amada RG-80 CNC Press Brake

2005 2004

2000 2003 2001

Daewoo “Puma 230MSA” CNC Turning & Milling Center with Sub-Spindle

2001

FEATURING: Amada Turret Punches and Brakes – New as 2002 • 2002 Hans Schroeder CNC Bender • Woodworking Machinery – New as 2006 •

2003 Daewoo “Puma 230MSA” CNC Lathe • Spot Welders – New as 2000 • 1996 Nordson

Powder Coat • Material Handling • Plus much more!!!

Branch Office:Boston, Massachusetts

(978) 474-4442 • Fax: (978) 474-4673

Corporate Office:555 Broadhollow Road, Melville, NY 11747

(631) 454-1766 • Fax: (631) 454-1779

http:www.kosterindustries.com • e-mail: [email protected]

Sale Managed By:

Industrial Recovery ServicesP.O. Box 5086, York, PA 17405 • 717.854.0316

In Conjunction With:


View of Late Model Amada Equipment

22 Ton Amada “Vipros 2510 King” Turret Punch88 Ton Amada RG-80 CNC Press Brake 55 Ton Amada RG-50 CNC Press Brake

22 Ton Amada “Apelio III” 2510V Laser/Punch, Low Hours!!

2001

2001 20002000

LASER/PUNCH (NEw 2001)Amada “Apelio III” 2510V, 31-station thick turret, [3] work clamps, 60" x 120" travel, 22 ton punch, [3] auto index stations, Donaldson ADF-4 dust collector, Koolant Mdl. 100000PR-NF-FILT chiller, AF2000E 2000 watt laser, Fanuc 160I-L controls, (6126 hours laser on time), S/N: A3251013 (Nov. 2001)

TURRET PUNCH (NEw 2000)Amada “Vipros 2510 King”, 22 Ton, 50" x 100" travel, 31-station, [3] auto indexing stations, Kooler Technotrans Mdl. EX3.0 cooler, brush table, hydraulic programmable punch, Fanuc 18-P control, S/N: 25100125 (2000)

Also Assorted Punches & Dies

CNC FOLDING MACHINE (NEw 2002)Hans Schroder Mdl. MPB3200/2.0, 127" bending length x 14 ga., back gauge with sheet supports, Provit 5200 controls, 6.29" stroke, 1.5 HP servo controlled upper beam drive, 3.14" bending beam adjustment, 3 HP servo controlled bending beam drive, rotating upper beam, S/N: 320023 (2002)

CNC BRAKES (NEw AS 2004)Amada RG-80, 98.7" bending length, 80.8" between housing, 88 ton capacity, 3.9" stroke, 15.75" throat, NC9-EX11 3-axis control, S/N: 812134 (2001)

Amada RG-50, 82.1" bending length, 55 ton capacity, 3.9" stroke, 15.75" throat, NC9-EX11 3-axis control, S/N: 5099727 (2001)

US Industrial Mdl. US-446, 78.7" overall bed length, 44 ton, hydraulic, [2] front supports, 63.7" between housing, 1.96" stroke, 7.8" throat, 7.5 HP motor, 2-axis CNC control & back gauge, S/N: W2004-108 (2004)

Also Available Assorted Amada Press Brake Tooling

SHEAR (wITH CNC BACK GAUGE)10' x ¼" Adira Mdl. GHS-0630, hydraulic, 40" front operated back gauge, rake angle adjustment, 103" squaring arm, ball transfers, Adiramatic CNC back gauge control, S/N: 4188/10919/0 (2002)

[2] Amada Mdl. MP1225NJ Sheet Loader (New 2000 & 2001)

2Branch Office:

Boston, Massachusetts(978) 474-4442 • Fax: (978) 474-4673


(631) 454-1766 • Fax: (631) 454-1779


Sale Managed By:



CNC TURNING/MILLING CENTERDaewoo “Puma 230MSA”, sub-spindle, 16C collets, turbo chip conveyor, 21.7" swing over bed, 15.4" swing over carriage, 20" turning length, 12-position turret with live milling, 0.001 degree c-axis indexing, 2.6" draw tube diameter, 20 HP AC main motor, 4500 RPM main spindle, LNS Eco load magazine bar feed, S/N: 23MS992706 (2003)

wELDERSAmada TS108i Platen Type Spot Welder, CNC, Amada metrics pendant control, 80-kva nominal, 180-kva maximum, 31" x 39" copper platen, 150kg max. electrode force, 13kg max. short current, S/N: 01810228 (1999)

H&H 50-kva Press Type Spot Welder, 24" throat, solid state controls, 440 volt, 6.6 secondary volt

Lors Mdl. 75AR 75-kva Spot Welder, 24" throat, Interlock Mdl. 1081B3 solid state controls, S/N: 597-6339 (1997)

Miller “Syncrowave 351” Welder

Lincoln SP-170T Spot Welder

[2] Lincoln Squarewave Tig 175 Pro Welders

MATERIAL HANDLING2175# Nissan “Optimum 30” Mdl. FJ01A115PV Propane Forklift, side shifter, approximately 4500 hours, S/N: RJ01-9G1207

3000# Powermover Forklift, stand-up type, electric, triple mast, S/N: 183457

3500# Crown Mdl. 35RRTT-S Forklift, electric, stand-up type, 210" reach, side shifter, S/N: H-14716-12

3500# Crown Mdl. RR3510-35 Forklift, electric, stand-up type, reach-in type, S/N: 1A161903

5000# Crown Mdl. 50FCTT0188 Forklift, electric, sit down type, side shifter, 36/48 volt, S/N: 1A137957

PUNCH & DIE SHARPENERAmada Togu-III-US, 6.30" max. diameter tool, 3000 RPM, variable speeds, 2 HP, coolant, power feeds, S/N: 30230440 (2002)

INSERTION PRESSAuto-Sert AS-7.5, S/N: 0953

POwDER COAT BOOTHNordson Automatic Spray Booth, 24" x 100" opening, Excell 20023 cartridge booth, fire detection, controller, darfogs HVAC drive, [12] versa-spray II guns & control cabinet, S/N: 81-096-240 (1996)

PAINT & DRYING LINEPaint Spray Booth with Nordson S4S-S1SLNX08C1 Spray Gun (1996), Peterson Mdl. D-72P-G 34" wide x 40" high x 17' single stage washer, 8' wide x 21' long x 92" high New England pass-thru drying oven, Honeywell digital controls, gas, double door, overhead conveyor system, S/N: 3144

PAINT SPRAY BOOTH (NEw 2008)Global Mdl. FP-1486, 92" high x 16' wide x 17' deep, [2] pumps, exhaust system, S/N: 67709 (2008)

AIR COMPRESSOR & DRYER50 HP Mattei Mdl. AC2037 Rotary Screw Type Air Compressor, micromat digital control, S/N: 04197N (2002)

Dri-Aire Mdl. DA-250 Air Dryer, S/N: 6135-012502TA

Global Mdl. FP-1486 Paint Spray Booth

Mesa M42 Line Borer Striebig “Econom II Optisaw 1B” Panel SawAuto-Sert Mdl. AS-7.5 Insertion Press

Mattei Mdl. AC2037 Air Compressor

2008

Amada Togu-III-US Punch & Die Sharpener

2002

2002

19991999

CNC ROUTER (2004) Andi “Stratos/Sup” 63" x 125" vacuum table, single table, 8-position tool changer, router & borer, 15kw vacuum motor, Optquest control, S/N: FITNCSA93716 (2004)

FRONT LOADING PANEL SAW (2005) Holzma Mdl. OPT-HPP-350/31/31, [6] grabbers, 10' cut, ball transfers, Cadmatic 4 software, S/N: 0-240-15-3242

EDGE BANDER Brandt Mdl. “Optimat KDN 350C”, coil feed, straight stock up to 3mm, pneumatic guillotine, front & back trim, top & bottom trim, scraping, buffing, S/N: 0-261-06-3202 (2006)

PANEL SAW Striebig “Econom II Optisaw 1B” Type 5192E, power feeds, 16' length, 72" high, 3kw motor, S/N: 28802

LINE BORER Mesa Mdl. M42 Linear Line Borer, 42-spindle, manual adjust, S/N: 1099018 (1999)

TABLE SAW Powermatic Mdl. 66TA-SAW Table Saw, 35" extension, guard, S/N: 03160661678

HINGE PRESS Blum “Minipress” (2003)

DUST COLLECTION SySTEM Belfab 6-Up/6-Down Bag Type

wOODwORKING MACHINERY

3Branch Office:



(631) 454-1766 • Fax: (631) 454-1779


Sale Managed By:



Amada TS108i Platen Type CNC Spot Welder

2175# Nissan “Optimum 30” Forklift

20011 of 2

2004

19991997

Amada Mdl. MP1225NJ Sheet Loaders

44 Ton US Industrial Mdl. US-446 CNC Press Brake

MISCELLANEOUS MACHINERYMarena Vertical Milling Machine, with 68-2760 RPM, 9" x 42" power feed table, one shot lube, 4" riser

14" Cummins Vertical Bandsaw

Powermatic Mdl. 1200 Vari-Speed Drill, with production table

Abrasive Bench Type Cutoff Saw

24" Manual Sheet Metal Roller

Dayton Mdl. Gy001A 6" Belt/9" Disc Sander

Ridgid Floor Type Drill Press

Dewalt Compound Mitre Saw

Presto 6000# Scissor Lift & 4400# Scissor Lift

Miscellaneous Throughout Shop Including: battery chargers, wood clamps, welding equipment, power tools, work tables, fans, tool cabinets, storage cabinets, hand tools, machine tooling, etc.

Assorted Sheet Metal

Material

H&H 50-KVA Press Type Spot Welder with Solid State Controls

Lors Mdl. 75AR 75-KVA Spot Welder with Solid State Controls

4Branch Office:



(631) 454-1766 • Fax: (631) 454-1779


Sale Managed By:



Auction DAte: WeDnesDAy, october 22nD, 2008, stArting At 10:30 A.m. InspectIon Dates: tuesDay, october 21st, 2008 from 8:00 a.m. to 4:00 p.m. anD mornIng of sale

Hans Schroeder Mdl. MPB3200/2.0 CNC Folding Machine

Nordson Spray Coat Booth with 12 Automatic Guns

10' x ¼" Adira Mdl. GHS-0630 Hydraulic CNC Shear

Partial View of Welding Equipment

Holzma Mdl. OPT-HPP-350/31/31 Front Loading CNC Panel Saw

Brandt Mdl. “Optimat KDN 350C” CNC Edge Bander

2006

2005

20022002

1996


5Branch Office:



(631) 454-1766 • Fax: (631) 454-1779


Sale Managed By:



Auction DAte: WeDnesDAy, october 22nD, 2008, stArting At 10:30 A.m. InspectIon Dates: tuesDay, october 21st, 2008 from 8:00 a.m. to 4:00 p.m. anD mornIng of sale

Auction DAte: WeDnesDAy, october 22nD, 2008, stArting At 10:30 A.m.InspectIon Dates: tuesDay, october 21st, 2008 from 8:00 a.m. to 4:00 p.m. anD mornIng of sale

AXP/8090755PA Lic#: Ian Liebgott AU003449LIndustrial Recovery Services AY000178L

IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: 13% Buyer’s Premium. A minimum deposit of 25% on all lots purchased is required at the time of sale in cash, certified or cashier’s check. Company or personal checks will be accepted only if accompanied by a letter from the payor’s bank guaranteeing unqualified payment to Koster Industries Inc. All checks must be made payable to the order of Koster Industries Inc. Direct bank wire transfers to the account of Koster Industries Inc. on balances due will be accepted with prior arrangement. No lot may be removed until complete settlement is made.

IMPORTANT NOTICE: Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the sale.

DIRECTIONS:

From Philadelphia International Airport: Take Route 95 North towards Philadelphia. Take Exit 19 (I-76 East). Take I-76 East into New Jersey then continue off Route 42 South. Go about 1.5 miles and take Exit 13 (Route 55 South) towards Glassboro/Vineland. Proceed on Route 55 South to Exit 56A (Route 47 South) towards Washington Township/Glassboro. Go about 1 mile and turn right at Delsea Drive. Go about ¾ of a mile and turn left onto Enterprise Court. [approximately 45 minutes traveling time]From Atlantic City International Airport: Head south towards Louis Lane. Go about 1.2 miles to Morin Avenue and turn right. Go about 4/10 of a mile to Tilton Road and take 2nd exit onto Absecon Avenue/Delilah Road/Mays Landing Road. Take ramp towards Philadelphia. Merge onto the Atlantic City Expressway West. Go about 34 miles to Exit 44 (Blackwood/State Highway 168N). Merge onto Sicklerville Road. Go about 2/10 of a mile and continue on Woodbury Turnsville Road. Go about 1.2 miles and turn left onto County House Road. Go about 1.9 miles and turn left on Delsea Drive/Glassboro/Monroeville. Go about 3/10 of a mile and turn left onto Enterprise Court. [approximately 50 minutes traveling time]

HOTELS:Holiday Inn . . . . . . . . . . . . . . . . . . . . . . . . . . . 877.531.5084 Best Western . . . . . . . . . . . . . . . . . . . . . . . . . . . . 856.340.7900

Hans Schroeder Mdl. MPB3200/2.0 CNC Folding Machine

P.O. Box 5086York, PA 17405 FIRST CLASS

U.S. PostagePAID

Permit No. 350York, PA

AUCTION SALE


10' x ¼" Adira Mdl. GHS-0630 Hydraulic CNC Shear

Amada RG-50 CNC Press Brake

Brandt Mdl. “Optimat KDN 350C” CNC Edge Bander





2002

20062000

2002

Featuring: Amada Turret Punches and Brakes – New as 2002 • 2002 Hans Schroeder CNC Bender • Woodworking Machinery – New as 2006 • 2003 Daewoo “Puma 230MSA” CNC Lathe • Spot Welders – New as 2000 • 1996 Nordson Powder Coat • Material Handling • Plus much more!!!

AUCTION SALEHollywood Tans | 11 Enterprise Court, Sewell, New Jersey 08080 22 Ton Amada “Vipros...

Documents

Transcript of AUCTION SALEHollywood Tans | 11 Enterprise Court, Sewell, New Jersey 08080 22 Ton Amada “Vipros...