Attn BOPP Tape Manufacturers

HARRISONS MALAYALAM LIMITEDRegistered Office: Bristow Road, Willingdon Island,

Cochin - 682 003, India.Tel.: +91 484 2668023. Fax: +91 484 2667485.Web: www.harrisonsmalayalam.com

This product information is presented in good faith and is to the best of our knowledge , accurate. It is intended to be used as aguide and is not to be considered as a specification for products described here, Harrisons Malayalam Ltd does not guaranteesatisfactory results in any application from reliance upon this information and assumes no liability for any loss or damage arisingout of its use. Harrisons Malayalam Ltd recommends that the user of our products thoroughly tests them under end use conditionsto assure that they meet the requirements of intended application

BOPP TAPE MANUFACTURERSBREAKING NEWSNOW YOU CAN MANUFACTURE , LINER LESS ( SELF WOUND ) SPECIALTY SELFADHESIVE TAPES ON YOUR BOPP COATING MACHINE , WITHOUT ANYMODIFICATION

Natural Rubber Latex Based Pressure Sensitive Adhesive’s , Based On A Patented Technology ,Now Available CommerciallyFor The First Time In India .Specially Developed Water Borne ( Solvent Free ) For Varies Kinds Of Adhesive Tapes AndAdhesive Coated Products For Diversified End Applications.Latxsive PSA’s , are solvent free Natural Rubber and Tackifier Resin Emulsion Pressure SensitiveAdhesive. These Adhesives are compounded especially for coating on , A Variety of Substrate likePlastic Films, Paper, Metal Foil, Fabric’s, Foams etc.This adhesive exhibits , a very good balance of peel adhesion , holding power ( Shear Strength ) ,Rolling Ball Tack , and good ageing resistance.The Viscosity of the Adhesive is precisely controlled , to enable or allow coating by Gravure plusMyer bar or Kiss coating plus Myer Bar or even Comma / Reverse Roller coating.The Wet ability of Latxsive PSA’s is preciously controlled and hence suitable for Transfer Coatingon , Silicone Coated Films or Paper , by all the prevailing Coating methods like , Comma , ReverseRoller, Gravure , Kiss Coating , Myer Bar and even Floating Knife .




Latxsive PSA’s , are based on the “go green” movement and environmentally friendly . TheseAdhesives are PVC free, lead free, phthalate free, and manufactured directly from the Rubber Estatein Kerala , India.

What’s so Special about these PSA’s ?Extremely user FriendlyNo VOC concernsNo Fire HazardNo Health HazardNow available locally , hence No Imports , No hasslesExtremely easy to coat / handle on a simplest Coating machine like , ( Gravure / Myer type ), used in BOPP Tape ManufactureProcess able on a very Low cost Coating Plant.Cures or dries at 70 deg C , hence the lowest Heat Energy, electricity cost.Extremely fast change over’s. No solvents necessary for cleaning the coating stations orIdlers.No need of a Primer coating , thanks to with our Technical Support for machine designing

or up gradation.Ready to use AdhesivesA lot of saving of time, energy and equipment cost , as simple stirrer’s can do the job ofViscosity Adjustment or Pigmentation etc.A lot of saving in terms of equipment cost. The conventional processing equipments like ,Rubber Mixing Mill , Sigma mixer , High speed Agitator etc are not required. This results ina lot of saving of Electricity cost . The connected Electrical load requirement is reduceddrastically. Just to quote a example , A smaller size Rubber mill needs a 15 HP Electricalload, A sigma mixer needs , a 25 HP Electrical Load. However a simplest Coating Machineplant with the necessary supporting converting machines , needs a connected load of approx.25 HP.

PSA Coating Methods

Kiss Coating




Gravure Myer Bar

Application :For General Purpose , Packaging, Holding, Bonding , Protection , Insulation Heat and Cold orElectrical Insulation , Repositionable , adhesive coated products.These adhesives are formulated with a most suitable, coat ability, wettablity , spreading properties .These Adhesives can be coated with great ease on

Low energy surfaces like , PVC, PP, PET, PE filmsVariety of papers like , calendared Kraft , crepe paper etcMetal FoilsElastomeric / polymeric FoamsCotton or Synthetic FabricsNon Woven Fabrics

Tape / Coated Product Applications Areas

AutomobileWhite goods/ EquipmentsInsulation , Heat and ColdInsulation ElectricalSurface ProtectionMaskingMounting and HoldingRepositionable packagingPackaging especially for Cold StorageReduction of Noise Pollution , etc.




Typical Properties

. Total Solids 40 t0 55 % as per requirementViscositypH 8.5 to 9.5Minimum Application Temperature 20 deg CService Temperature Range Up to 100 deg c with special additives

Coated Web Film , paper , foil, foam , Fabric

Coat weight , Grams / Sq. Mtr. From 4 gsm to 100 gsm dry

180Peel Strength , grams/ 25 mm Min 50 to max 2000 grams , depending on the endapplication and a suitable PSA

Shear Strength.25 mm X 25 mm X 1000 grams

From 1 hr to > 100 hours , depending on the type ofadhesive and the backing substrate

Rolling Ball Tack , mm 100 mm or moreLoop Tack , grams /25 mm Min 50 grams to 500 grams

LATXSIVE PSA FREE SAMPLE IS AVAILABLE ON REQUEST , WITH SUPPORTINGINFORMATION ON THE END PRODCUT APPLICATION, THE SUBSTRATE , ETC.

Coated Products Gallery

Attn BOPP Tape Manufacturers

Science

Transcript of Attn BOPP Tape Manufacturers