ATM ROBBERY

17
ATM ROBBERY In first instance, there is a person who apparently is making a transaction at the ATM. [email protected] Translated by: S.L. de Sánchez

description

ATM ROBBERY. In first instance, there is a person who apparently is making a transaction at the ATM. [email protected]. Translated by: S.L. de Sánchez. SETTING THE TRAP. What he is really doing is placing a trap in the ATM to “capture” the card of the next user. [email protected]. - PowerPoint PPT Presentation

Transcript of ATM ROBBERY

ATM ROBBERY In first

instance, there is a person who apparently is making a transaction at the ATM.

[email protected] by: S.L. de Sánchez

What he is really doing is placing a trap in the ATM to “capture” the card of the next user.

SETTING THE TRAP

[email protected] by: S.L. de Sánchez

THE WARNING Altering an ATM

is a risky business. These individuals work in teams to warn of any possible eye witnesses and/or some potential victims.

[email protected] by: S.L. de Sánchez

Here we can see the next client using the ATM after the trap has been set. He inserts his card and starts a transaction.

THE VICTIM

[email protected] by: S.L. de Sánchez

THE CAPTURE The card has

been captured and the confused client is asking himself why the card is stuck. Anyways, there we see the help (HELP?) coming.

[email protected] by: S.L. de Sánchez

THE HELP Here we see the

thief pretending to help. What he is actually trying to do is to get the PIN number now that he has captured the card.

[email protected] by: S.L. de Sánchez

GETTING THE PIN He convinces the

customer that he can retrieve the card if he [the customer] types his PIN number while he presses both “cancel” and “enter” buttons.

[email protected] by: S.L. de Sánchez

GIVING UP After several

attempts, the customer is convinced that the ATM has captured his card. Both, customer and Thief, leave the ATM.

[email protected] by: S.L. de Sánchez

RETRIEVING THE CARD Satisfied that

the area is clear, the thief returns to the ATM to get the captured card. He not only has the card but also the customer’s PIN number.

[email protected] by: S.L. de Sánchez

RUNNING AWAY In possession of

the card and PIN number, the thief leaves the ATM and takes with him $1,000.00 dollars from the account.

[email protected] by: S.L. de Sánchez

THE TRAP The trap is

made of X-ray paper, which is preferred by thieves because of its dark color similar to the plastic frame of the ATM slot.

[email protected] by: S.L. de Sánchez

PLACEMENT The trap is then

inserted into the ATM slot. Taking care of not fully inserting the trap, the ends are filled with glue to stick them to the top and the bottom of the cleft.

[email protected] by: S.L. de Sánchez

INVISIBLE Once both ends

were glued is almost impossible to be noticed by customers.

[email protected] by: S.L. de Sánchez

WHY THE CARD IS CAPTURED?

Cuts are made on both sides of the trap to prevent the card being returned prior to completing the transaction.

[email protected] by: S.L. de Sánchez

RETRIEVING THE CARD

Once the client is gone, and the PIN number was obtained, the thief can remove the glued ends and holding both ends he simply pulls out the trap and gets the captured card.

[email protected] by: S.L. de Sánchez

RECOMMENDATIONS1. Once the client’s

card is retained, he/she must check if the slot does not have both ends of the trap attached to it, if so, pull out the trap and retrieve your card.

2. Immediately report the event to the Bank.

[email protected] by: S.L. de Sánchez

SEND THIS MESSAGE TO ALL YOUR FAMILY AND

FRIENDS

PEDRO A.MORALES DUEÑASTranslated by: S.L. de Sánchez