Ateco dome power point presentation master

download Ateco dome  power point presentation   master

of 22

  • date post

    12-Jul-2015
  • Category

    Engineering

  • view

    193
  • download

    2

Embed Size (px)

Transcript of Ateco dome power point presentation master

PowerPoint Presentation

GLOBALSOLUTIONSSTORAGE TANKAGEEQUIPMENT Ateco Tank Technology Company

Presented by: Brian Quinn B.Sc. C.Eng. Director International Operations - Ateco UK Ltd.Ateco Tank Technology Company

Introduction to ATECO2

Ateco specialise in the Design and Manufacture of Storage Tankage Equipment.

we have been in business for more than 30 years.

we manufacture all our Storage Tankage Products at our modern fully automated facilities in Turkey

we are the supplier of choice for most of the international operating companies

we do not outsource manufacturing and seek to source all material from within Europe.

we also have an office in the UK Ateco UK Ltd.

we are the only company of its type in the world that can claim to manufacture all the standard equipment on an above ground hydrocarbon liquid storage tankAteco Tank Technology Company

Ateco Tank Technology CompanyAteco employs over 100 people at our Head Office and Manufacturing Plants in Turkey and UK including a worldwide network of agents and distributors who provide expert knowledge and customer support

Ateco limit our scope of supply to the first flange on the tank, therefore, if the equipment is on the tank then it is within our normal scope of supply we are a supply only company and do not take on site installation work.

Ateco operate within the quality guidelines of ISO 9001

Ateco Design and Manufacture storage tank equipment to most internationally recognised codes, e.g. API, BS, ISO, ASTM, ASME, NFPA11, AWWA and the various Certification Engineer requirements such as Lloyds, SGS, DNV, etc.

4Ateco Tank Technology CompanyAteco design and supply a complete range of storage tankage products and services: including:

aluminum internal floating roofs pontoon and full contact

primary and secondary seal systems for internal and external floating roof tanks

roof drain systems for external floating roof tanks

floating suction units for fixed roof tanks

flame and vapour control instrumentation

emission control solutions

firefighting equipment for storage tanks

5Ateco Aluminum Geodesic Dome Roof

6

the Ateco Dome Roof is manufactured from aluminum which is one of the worlds most commonly used metals

its lightness, coupled with its strength and excellent corrosion resistance are the main reasons for it being used in the design of the Ateco Dome Roof

there are three main component parts in any Dome Extruded Profiles, Nodes Points and Panel Sheets

the Ateco Dome Roof can be used on tanks used to store most productsAluminium Geodesic Dome Roof

7

the Ateco Dome Roof is a system of triangular, lightweight Extruded Profiles - each and every profile acts in either in compressive and tensile mode to resist loading

the profiles are connected through Node Points transmitting loads laterally to the Integral Tension ring and then through Supports to the tank shell and tank foundation

the framework is covered with minimum 1.2 mm thick aluminum alloy Panel Sheets

each of the extruded profiles and therefore each of the triangles can be of different lengths

8

SLIDING SUPPORT Free VentedSLIDING SUPPORT Vapour TightFIXED SUPPORT Free VentedFIXED SUPPORT Vapour Tight

the Ateco Dome Roof is an all bolted structure and no welding is required at site for its assembly and erection

the Ateco Dome Roof fully complies with the requirements of API 650 Appendix G

any equipment that you have on a conventional steel tank roof can be fitted on the Ateco Dome Roof

The applied loads (up to 500 lbs/sqft) and taken into consideration in the design of the Ateco Dome Roof consist of: live load, dead load, wind load (up to 175 mph) and seismic factors

The Ateco Dome Roof is normally fitted on a free vented tank however if required we can fit a vapour tight dome roof

10

The Ateco Dome Roof standard design is offered with the following features:

Gauge Hatch AssemblyAccess/Manway AssemblyCentre Free Vent Skylight AssemblyFree Vented Design with Sliding Supports & Bird Screen

The Ateco Dome Roof can be designed to support an aluminum internal floating roof suspended IFR.

The Ateco Dome Roof is normally designed with a maximum radius equal to 1.2 times the tank diameter and the minimum is 0.7 times the tank diameter, this equates to the ratio of dome height to tank diameter of about 1:6

30,000 mm diameter tank dome height is approximately 5,000 mm

The Ateco Dome Roof can be assembled inside the tank and lifted into its final position using either a crane or a system of pulley blocks

Ateco can supply all the necessary assembly and erection equipment and tools or provide details if customer wishes to source locally

If using the jacking method to erect the tank, the Ateco Dome Roof is fitted on the top course and jacked up with the shell

MAIN ADVANTAGES OF ATECO ALUMINUM GEODESIC DOME ROOF

Ateco Dome Roof is a self-supporting structure - internal roof supports are not required

Ateco Dome Roof lightweight construction means that when fitting on an existing external floating roof tank - it is not necessary to reinforce the tank shell

Ateco Dome Roof is fitted with an Integral Tension Ring to avoid any additional stiffening requirement of the tank shell

Ateco Dome Roof does not require painting, EVER - in this respect it can be considered as maintenance free for the entire lifetime of the tank

Inspection and Supervision ServicesAteco has qualified and experience engineers who can support the installation of all Ateco tank equipment on site, we also offer Inspection Services to give advice on the operation, suitability, maintenance, repair or replacement of all Ateco supplied tank equipment.

16

Ateco Dome Roof QuotationThe Ateco Dome Roof is normally supplied on the basis of the Ateco Standard Terms and Conditions for the Preparation of a Quotation for Goods.

The Ateco Dome Roof is supplied to ex works Turkey and packed in sea going containers.

Typically Delivery to ex works for an Ateco Dome Roof; 30,000 mm (100 ft.) nominal diameter tank is in the order of 14 weeks.

A breakdown of the Delivery is as follows:

Prepare Detail Engineering Drawings: 5 weeksManufacture : 7 weeksFinal Inspection and Packing: 2 weeks

Total: 14 weeks to ex works from acceptance of Purchase Order.

A 30,000 mm (100 ft.) Ateco Dome Roof with standard accessories should be shipped in 1 No x 40 ft. container

17

Ateco Dome Roof QuotationTechnical Details:

Typically 30,000 mm (100 ft) Ateco Dome Roof, with standard accessories has an installed weight of 9,500 kg (approx. 10 Tons)

The Number of Sliding Supports would be 28 No.

Load transferred through each Sliding Support (Dead Load + Live Load) to tank shell is 28.3 kN

Assembly and Erection:

5 skilled skilled labour x 10 hours per day x 6 days a week x 4 weeks: approximately 1200 Man-hours.

Ateco recommend complete assembly and installation by a competent tank contractor and if not familiar with the Ateco Dome Roof they should retain the services of an Ateco Supervisor.

18

Aluminum Dome Roofs

South Pole Research StationMr Buckminister Fuller from USA developed the principal of the geodesic dome in the 1940s primarily for social housing Grain Storage Hanger Spruce Goose AirplaneAstrodome Football StadiumDISCLAIMERAteco does not claim or seek to claim that the domes in these photographs are Ateco Domes. Geodesic means the shortest line between two points on a curved surface.

The complex design of the dome structure is carried out using the latest finite element method (FEM). The propriety software used by Ateco enables us to maximize the domes structural strength, minimize the number of different beam lengths and by optimizing the panel size Ateco has developed a dome with the minimum number of rings

The Astrodome in Houston is 200 meters diameter. Diameter is no limitation design proposals already developed to cover Downtown Houston, Texas with an aluminum geodesic dome roof19

Ateco Tank Technology Company

Yazlk Yeni Mah. Baretmen Cad.No:46 Glck - KOCAELI - TURKEYPO Box 41650

Phone: + + 90 262 335 15 98Fax: + + 90 262 335 15 67

E-mail: info@atecotank.comWebsite: www.atecotank.comAteco UK Ltd

Phone: + + 44 (0) 1899 830542Mobile: + + 44 (0) 7789 690039E-mail: ateco.uk@atecotank.com

Ateco Tank Technology Company

20

Ateco Tank Technology Company NoDateItem No:Qty.PropertiesSizeBuyerEnd User Country12013J.100.0011 19.5 MT.GALANA PETROLEUMGALANA TERMINAIS MOZAMBIQUEMOZAMBIQUE22014J.100.0021 30 MT.AGDECOLBIOENERGY S.A / ECOPETROLCOLOMBIA32014J.100.0031 29.5 MT.ENOC / CYLINGAS (ONGOING)ECOMAR PROJECTUAE42014J.100.004129.5 MTENOC / CYLINGAS (ONGOING)ECOMAR PROJECTUAE52014J.100.0051 29.5 MT.ENOC / CYLINGAS (ONGOING)ECOMAR PROJECTUAE62014J.100.006115.5 MT.ENOC / CYLINGAS (ONGOING)ECOMAR PROJECTUAE72014J.100.007115.5 MTENOC / CYLINGAS (ONGOING)ECOMAR PROJECTUAE82014J.100.008113.5 MT.ENOC / CYLINGAS (ONGOING)ECOMAR PROJECTUAE92014J.100.009113.5 MT.ENOC / CYLINGAS (ONGOING)ECOMAR PROJECTUAEAteco Aluminum Dome Reference 2013/201421

Ateco Tank Technology Company - Photo Gallery

22