Atamturktur Resume

8/10/2019 Atamturktur Resume

1/10

Sez Atamturktur, Ph.D.

Page1

Dr. Sez Atamturktur

Associate ProfessorGlenn Department of Engineering110 Lowry Hall, Clemson UniversityClemson, SC 19634-0911

864-656-3003www.cuideas.org

EDUCATION

Ph.D., The Pennsylvania State University, 2009, Civil Engineering

M.S., The Pennsylvania State University, 2006, Architectural Engineering

B.S., Orta Dogu Teknik Universitesi (ODTU), 2002, Architecture and Civil Engineering

PROFESSIONAL EXPERIENCE

Clemson University, 2013-present, Associate Professor of Civil EngineeringUniversity of Franche-Comt, 2013, Visiting Professor of Department of Applied Mechanics

Clemson University, 2010-2013, Assistant Professor of Civil Engineering

Los Alamos National Laboratory, 2009, LTV Technical Staff Member

Los Alamos National Laboratory, 2008, Graduate Research Assistant

University of Sheffield UK, 2007, Visiting Research Assistant

The Pennsylvania State University, 2004-2009, Research and Teaching Assistant

PROFESSIONAL ACTIVITIES

Elected Chair, Model Validation & Uncertainty Quantification Technical Division, Society ofExperimental Mechanics, (2013-present).

Elected Member, American Society of Mechanical Engineers Verification and Validation (V&V10)Technical Committee, (2014-present).

Organizer and/or Chair of over ten sessions at International conferences since 2010.

Journal reviewer for eighteen different journals since 2010.

Reviewer for funding agencies including the U.S. Department of Energy, and National ScienceFoundation as well as a number of federal institutions and private organizations.

SELECTED PUBLICATIONS

* indicates Atamturkturs graduate students

Articles on Model Validation, Calibration and Uncertainty Quantification

Atamturktur S., Stevens G.*, Van Buren K*. and Wheeler E.* (accepted, in print), Assessing theTrade-offs of Fidelity, Robustness, and Self-Consistency for Model Parameter Identification,


2/10


Page2

Engineering Computations: International Journal for Computer-Aided Engineering and Software(Emerald).

Atamturktur S., Liu Z.*, Cogan S. and Juang C. H. (accepted, in print), Calibration of Impreciseand Inaccurate Numerical Models Considering Fidelity and Robustness: A Multi-ObjectiveOptimization Based Approach, Structural and Multi-disciplinary Optimization (Springer).

Liu Z.*, Atamturktur S. and Juang C. H. (accepted, in print), Reliability based Multi-objectiveRobust Design Optimization of Steel Moment Resisting Frame Considering Spatial Variability ofConnection Parameters, Engineering Structures (Elsevier).

Bi S.*, Atamturktur S. and Deng Z. (accepted, in print), Stochastic Model Updating UsingDistance Discrimination Analysis, Chinese Journal of Aeronautics (Elsevier).

Atamturktur S., Egeberg M.*, Stevens, G.* and Hemez F. (2014), "Defining Coverage of anOperational Domain Using a Modified Nearest-Neighbor Metric," Mechanical Systems and SignalProcessing (Elsevier), DOI: 10.1016/j.ymssp.2014.05.040.

Atamturktur S., Hegenderfer J.*, Williams B., Unal, C., (2014), Selection Criterion Based on anExploration-Exploitation Approach for Optimal Design of Experiments, Journal of EngineeringMechanics (ASCE), DOI: 10.1061/(ASCE)EM.1943-7889.0000823,04014108.

Atamturktur S., Hegenderfer J.*, Williams B., Egeberg M.* Lebensohn R. and Unal C. (2014), AResource Allocation Framework for Experiment-Based Validation of Numerical Models, Journalof Mechanics of Advanced Materials and Structures (Taylor & Francis), DOI:10.1080/15376494.2013.828819.

Atamturktur S., Farajpour I.*, Prabhu S.* and Haydock A.* (2014), Adaptively Weighted SupportVector Regression: Prognostic Application to a Historic Masonry Fort, Journal of Performance ofConstructed Facilities (ASCE),DOI 10.1061/(ASCE)CF.1943-5509.0000517.

Farajpour I.* and Atamturktur S. (2014), Partitioned Analysis of Coupled Numerical ModelsConsidering Imprecise Parameters and Inexact Models, Journal of Computing in CivilEngineering (ASCE),Vol. 28, No. 1, pp., 145155.

Van Buren K.*, Atamturktur S. and Hemez F. (2013), Model Selection through Robustness andFidelity Criteria: Modeling the Dynamics of the CX-100 Wind Turbine Blade, Journal ofMechanical Systems and Signal Processing (Elsevier), Vol. 5, pp. 99-112.

Dalton S.*, Atamturktur S., Farajpour I.* and Juang C.H. (2013), An Optimization BasedApproach for Structural Design Considering Safety, Robustness, And Cost, Journal ofEngineering Structures (Elsevier). Vol 57, pp. 356-363.

Hegenderfer J.* and Atamturktur S. (2013), Prioritization of Code Development Efforts inPartitioned Analysis, Computer Aided Civil and Infrastructure Engineering (Wiley), Vol. 28, No.4, pp. 289- 306.

Atamturktur S., Williams B., Egeberg M.*, and Unal, C. (2013), Batch Sequential Design of

Optimal Experiments for Improved Predictive Maturity in Physics-Based Modeling, Structural andMultidisciplinary Optimization (Springer), Vol. 48, No. 3, pp. 549-569.

Farajpour I.* and Atamturktur S. (2013), Error and Uncertainty Analysis of Inexact and ImpreciseComputer Models, Journal of Computing in Civil Engineering (ASCE),Vol. 27, No. 4, pp. 407418.

Mollineaux M., Van Buren K.*, Hemez F. and Atamturktur S. (2012), Simulating the Dynamics ofWind Turbine Blades: Part I, Model Development and Verification, Wind Energy (Wiley), doi:10.1002/we.1519.


3/10


Page3

Van Buren K.*, Mollineaux M., Hemez F. and Atamturktur S. (2012), Simulating the Dynamics ofWind Turbine Blades: Part II, Model Validation & Uncertainty Quantification, Wind Energy(Wiley), doi: 10.1002/we.1522.

Farajpour, I.* and Atamturktur S. (2012), Optimization-based Strong Coupling Procedure forPartitioned Analysis. Journal of Computing in Civil Engineering (ASCE),Vol. 26, No. 5, pp. 648

660.Van Buren K.* and Atamturktur S. (2012), A Comparative Study: Predictive Modeling of WindTurbine Blades, Journal of Wind Engineering (Multi-science), Vol. 36, No. 3, pp. 235- 250.

Atamturktur S., Hemez F. and Laman J. (2012), "Verification and Validation Applied to FiniteElement Models of Historic Masonry Monuments," Engineering Structures (Elsevier),Vol. 43, pp.221- 234.

Atamturktur S. and Sevim B. (2012), Seismic Performance Assessment of Masonry Tile Domesthrough Non-linear Finite Element Analysis, Journal of Performance of Constructed (ASCE), Vol.26, No. 4, pp. 410- 423.

Atamturktur S. and Laman J. (2012), "Finite Element Model Correlation and Calibration of HistoricMasonry Monuments: Review," Journal of Structural Design of Tall and Special Buildings (Wiley),Vol. 21, No. 2, pp. 96- 113.

Atamturktur S., Hemez F., Williams B., Tome C. and Unal C. (2011), A Forecasting Metric forPredictive Modeling, Computers and Structures (Elsevier), Vol. 89, No. 23- 24, pp. 2377- 2387.

Atamturktur S., Bornn L. and Hemez F. (2011), "Vibration Characteristics of Vaulted MasonryMonuments Undergoing Differential Support Settlement," Engineering Structures (Elsevier),Vol.33, pp. 2472-2484.

Hemez F. and Atamturktur S. (2011), The Dangers of Sparse Sampling for the Quantification ofMargin and Uncertainty, Reliability Engineering and System Safety (Elsevier),Vol. 96, pp. 1220-1231.

Unal C., Williams B, Hemez F., Atamturktur S. and McClurea P. (2011), Improved Best Estimate

Plus Uncertainty Methodology, Including Advanced Validation Concepts to License EvolvingNuclear Reactors, Nuclear Engineering and Design (Elsevier),No. 241, pp. 1813- 1833.

Atamturktur S. and Boothby T. (2010), Stochastic Bayesian Calibration of Finite Element Modelsof Masonry Vaults, The Masonry Society Journal (TMS),Vol. 28, No. 2, pp. 77- 93.

Hemez F., Atamturktur S. and Unal C. (2010), Predictive Maturity of Validated NumericalModels, Computers and Structures (Elsevier),Vol. 88, pp. 497- 505.

Articles on Masonry Structures

Prabhu S.* and Atamturktur S. (2014), Selection of Optimal Sensor Locations Based on Modified

Effective Independence Method: Case Study on a Gothic Revival Cathedral,Journal of

Architectural Engineering (ASCE), Vol. 19, No. 4, pp. 288-301.

Li T.* and Atamturktur S. (2014), Fidelity and Robustness of Detailed Micromodeling, SimplifiedMicromodeling and Macromodeling Techniques for a Masonry Dome, Journal of Performance ofConstructed Facilities (ASCE), Vol. 28, No. 3, pp. 480-490.

Prabhu S.*, Atamturktur S., Brosnan D., Dorrance R. and Messier, p. (2014), FoundationSettlement Analysis of Fort Sumter National Monument: Model Development and Predictive

Assessment, Engineering Structures (Elsevier), Vol. 65, pp. 1-12.


4/10


Page4

Prabhu S.* and Atamturktur S. (2013), Feature Assimilation in Condition Based InfrastructureManagement, Journal of Nondestructive Testing and Evaluation (ASTM), Vol. 41, No. 1, pp. 1-11.

Atamturktur S., Li, T.*, Ramage M. and Farajpour I.* (2012), Load Carrying Capacity Assessmentof a Scaled Masonry Dome: Simulations Validated with Non-Destructive and Destructive

Measurements,Construction and Building Materials (Elsevier), Vol. 34, pp. 418- 429.Sevim B., Bayraktar A., Altunk A.C., Atamturktur S. and Birinci F. (2011), Finite Element ModelCalibration Effects on the Earthquake Response of Masonry Arch Bridges, Finite Elements inAnalysis and Design (Elsevier), Vol. 47, No. 7, pp. 621- 634.

Sevim B., Bayraktar A., Altuniik A. C., Atamturktur S. and Birinci F. (2011), Assessment ofNonlinear Seismic Performance of a Restored Historical Arch Bridge Using Ambient Vibrations,Nonlinear Dynamics (Springer),Vol. 63, No. 4, pp. 755- 770.

Atamturktur S., Fanning P. and Boothby T. (2010), Traditional and Operational Modal Testing ofMasonry Vaults, Engineering and Computational Mechanics (ICE),Vol. 163, No. 3, pp. 213- 223.

Articles Resulting from Collaborations with Geotechnical Engineering Group

Gong W., Khoshnevisan S., Juang C. H., Atamturktur S., (accepted, in print), RobustGeotechnical Design of Drilled Shafts in Clay Using Spreadsheet, Journal of Geotechnical andGeoenvironmental Engineering (Eelsevier).

Juang C.H., Wang L.*, Hsieh H. S. and Atamturktur S. (2014), Robust Geotechnical Design ofBraced Excavations in Clays, Structural Safety (Elsevier), Vol. 49, pp. 37-44.

Wang L.*, Juang C.H., Atamturktur S., Gong W.*, Khoshnevisan S.* and Hsieh H. S. (2014),Optimization of Design of Supported Excavations in Multi-layer Strata, Journal ofGeoEngineering (TGS), Vol. 9, No. 1, pp. 35-44.

Liu Z.*, Juang H. and Atamturktur S. (2013), Confidence Level-Based Robust Design of

Cantilever Retaining Walls in Sand, Computers and Geotechnics (Elsevier), Vol. 52, pp. 16- 27.Wang L.*, Hwang J.H., Juang C.H. and Atamturktur, S. (2013), Reliability-Based Design of RockSlopes A New Perspective on Design Robustness, Engineering Geology (Elsevier), Vol. 154,pp. 56- 63.

Luo Z.*, Atamturktur S. and Juang C.H. (2013), Bootstrapping for Characterizing the Uncertaintyof Sample Statistics and its Effect on Serviceability Failure Probability in a Braced Excavation,Journal of Geotechnical and Geoenvironmental Engineering (ASCE), Vol. 139, No. 1, pp. 13- 23.

Liu Z.*, Atamturktur S. and Juang H. (2013), Performance Based Robust Design Optimization ofSteel Moment Resisting Frames, Journal of Constructional Steel Research (Elsevier), Vol. 89,pp. 165-174.

Juang C.H., Liu Z.* and Atamturktur S. (2013), Reliability-based Robust Geotechnical Design ofRetaining Walls, Sound Geotechnical Research to Practice, ASCE Geotechnical SpecialPublication (ASCE), pp. 514-524.

Juang H., Wang L.*, Atamturktur S. and Luo Z. (2012), Reliability-Based Robust and OptimalDesign of Shallow Foundations in Cohesionless Soil in the Face of Uncertainty, Journal ofGeoEngineering (TGS), Vol. 7, No. 3, pp. 75- 87.


5/10


Page5

Juang C.H., Luo Z.*, Atamturktur S. and Huang H. (2012), Bayesian Updating of Soil Parametersin Braced Excavations Using Field Observations, Journal of Geotechnical and GeoenvironmentalEngineering (ASCE),Vol. 139, No. 3, pp. 395- 406.

Luo Z.*, Atamturktur S. and Juang C.H. (2012), Effect of Spatial Variability on Probability-BasedDesign of Excavations against Basal-Heave, Geotechnical Special Publication (ASCE),No. 225,

pp. 2876-2884.Atamturktur S. and Laman J. (2012), "Finite Element Model Correlation and Calibration of HistoricMasonry Monuments: Review," Journal of Structural Design of Tall and Special Buildings (Wiley),Vol. 21, No. 2, pp. 96- 113.

Luo Z.*, Atamturktur S., Cai Y. and Juang C. H. (2012), Simplified Random-Field Framework ForReliability-Based Design Against Basal-Heave Failure in A Braced Excavation in Clay, Journalof Geotechnical and Geoenvironmental Engineering (ASCE), Vol. 138, No.4, pp. 441- 450.

Luo Z.*, Atamturktur S., Cai, Y. and Juang C. H. (2012), Reliability Analysis of Basal-heave in aBraced Excavation in a 2-D Random Field, Computers and Geotechnics (Elsevier),Vol. 39, pp.27- 37.

Luo Z.*, Atamturktur S., Juang C.H. and Lin P.S. (2011), Probability of Serviceability Failure in aBraced Excavation in a Spatially Random Field: Fuzzy Finite Element Approach, Computers andGeotechnics (Elsevier),Vol. 38, No. 8, pp. 1031- 1040.

Articles Resulting from Collaborations with Water Resources Group

Fisher M.*, Atamturktur S. and Khan A. (2013), A Novel Vibration-Based Monitoring Techniquefor Bridge Pier and Abutment Scour, Journal ofStructural Health Monitoring (Sage), Vol. 12, No.2, pp. 114- 125.

Fisher M.*, Chowdhurry Md. N.*, Khan A. and Atamturktur S. (2013), An Evaluation of ScourMeasurement Devices, Flow Measurement and Instrumentation (Elsevier), Vol. 33, pp. 55-67.

Fisher M.*, Khan A. and Atamturktur S. (2013), Scour Monitoring via Turbulent Open ChannelFlow, Measurement Science and Technology (IOP Science), Vol. 24, No. 8, pp. 1-14.

Fisher M.*, Khan A. and Atamturktur, S. (2013), "State of the Art in Scour Monitoring," SedimentTransport: Monitoring, Modeling and Management, Editors: Khan, A. A., and Wu, W., NovaScience Publishers, Inc. (book chapter).

HONORS AND AWARDS

Nominated for the Best Paper Award, Model Validation and Uncertainty Quantification TechnicalGroup, 32ndInternational Modal Analysis Conference, 2014

Murray Stokely Award for Excellence in Teaching, College of Engineering and Science, Clemson

University, 2014Nominated for the Best Paper Award, Model Validation and Uncertainty Quantification TechnicalGroup, 31stInternational Modal Analysis Conference, 2013

Nominated for the Middlebrooks/Croes/Norman awards, ASCE Journal of Geotechnical andGeoenvironmental Engineering, 2013

Most Outstanding Paper Award, Taiwan Geotechnical Society, 2012

Outstanding Teacher Award, Clemson University Chapter of Chi Epsilon Honors Society, 2012


6/10


Page6

Nominated for the Middlebrooks/Croes/Norman awards, ASCE Journal of Geotechnical andGeoenvironmental Engineering, 2012

Outstanding Teacher Award, Clemson University Chapter of Chi Epsilon Honors Society, 2011

Best Paper Award, Model Validation and Uncertainty Quantification Technical Group, 28 thInternational Modal Analysis Conference, 2010

LAAP Outstanding Contribution Award, Los Alamos National Laboratory, 2009

SPONSORED RESEARCH

An Integrated Numerical and Experimental Study: Structural Behavior of Dry-Stacked Systems,National Concrete Masonry Association, $104,000; (2014-2016), (PI: Atamturktur)

Debris Impact Resistance of Steel Roof Decks, Vulcraft, $24,205; (2013- 2015), (PI: Atamturktur)

Graduate Training in Engineering and Managing Resilient and Sustainable Infrastructure,Graduate Assistance in Areas of National Need (GAANN), U.S. Department of Education,$799,596 with matching funds of $199,900, (2012- 2016), (PI: Atamturktur).

Structural Integrity Assessments at Fort Sumter National Monument (FSNM): Phase II CESU,National Park Services, U.S. Department of the Interior, $172,000; (2012- 2014), (PI:

Atamturktur).

Transforming Robust Design Concept into a Novel Geotechnical Design Tool, National ScienceFoundation, $394,666; (2012- 2015), (PI: Juang, Co-PI: Atamturktur).

Structural Integrity Assessments at Fort Sumter National Monument (FSNM): Phase I CESU,National Park Services, U.S. Department of the Interior, $270,000; (2011- 2014), (PI:

Atamturktur).

Structural Prognosis for The Effective Management of Nations Cultural Heritage, U.S.Department of the Interior, $25,000 with matching funds of $25,000; (2011- 2013), (PI:

Atamturktur).

Effect of Member Failure on Structural Stability Applied to Fort Jefferson, FL., 4SE, $6,000;(2010), (PI: Atamturktur).

Predictive Maturity of Multi-Scale Simulation Models for Fuel Performance, U.S. Department ofEnergy, $614,690; (2010- 2014), (PI: Atamturktur).

Real Time Measurement of Scour Depths around Bridge Piers and Abutments, South CarolinaDepartment of Transportation, $458,904; (2010- 2014), (PI: Khan, Co-PI: Atamturktur).

The Influence of Adding Physics on the Predictive Maturity of a Code, Los Alamos NationalLaboratory, $78,757; (2010- 2011), (PI: Atamturktur).

Structural Health Monitoring of Nations Cultural Heritage, U.S. Department of the Interior,

$25,000 with matching funds of $25,000; (2010- 2011), (PI: Atamturktur).

OTHER SPONSORED ACTIVITY

Masonry Structural Design Competition for Civil Engineering Students, National ConcreteMasonry Association (NCMA), $13,000; (2014- 2015), (PI: Atamturktur).

REU: Transforming Robust Design Concept into a Novel Geotechnical Design Tool, NationalScience Foundation, $12,000; (2013- 2014), (PI: Juang, Co-PI: Atamturktur).


7/10


Page7

Masonry Structural Design Competition for Civil Engineering Students, National ConcreteMasonry Association (NCMA), $13,000; (2013- 2014), (PI: Atamturktur).

Structural Health Monitoring of Civil Infrastructure, Creative Inquiry Grant, Clemson University,$10,000 (2010-2013), (PI: Atamturktur).

Experiences in Undergraduate Research, Exploration and Knowledge Advancement (EUREKA!),

$2000 (2010-2014), (PI: Atamturktur).

GRADUATE STUDENT ADVISING

Postdoctoral Fellows as the Faculty Advisor

Yonten, K. Prioritization of Code Development Efforts in Resource Allocation to Achieve

Improved Predictive Maturity of Multi-Scale and Multi-Physics Modeling of Fuel Performance,

(2011-2012).

Hamutcuoglu, M. Experiment Prioritization: Resource Allocation to Achieve Improved Predictive

Maturity for Multi-Scale and Multi-Physics Modeling of Fuel Performance, (2010-2011).

Doctoral Graduates

Ismail Farajpour (Ph.D.), Optimization-based Strong Coupling of Multiple Single-Solver Models,

(December 2013).

Lei Wang (Ph.D.), Robust Design of Braced Excavation in Clay, Co-Advised with Dr. H. Juang,

(December 2013).

Zhifeng Luo (Ph.D.), Robust Performance-based Structural Design, Co-Advised with Dr. H.

Juang, (August 2013).

Kendra Van Buren (Ph.D.), Assuring Robustness against Uncertainty in Predictive Modeling of

Wind Turbine Blades, (December 2012).

Murray Fisher (Ph.D.), Vibration Based Structural Health Monitoring of Bridge Pier and Abutment

Scour, Co-Advised with Dr. A. Khan, (December 2012).

Josh Hegenderfer (Ph.D.), Resource Allocation Framework: Validation of Numerical Models of

Complex Engineering Systems against Physical Experiments, (August 2012).

Zhe Luo (Ph.D.), Simplified Random-Field Framework for Reliability-Based Design against

Basal-Heave Failure in A Braced Excavation in Clay, Co-Advised with Dr. Juang, (December

2011).

Masters Graduates

Matthew Egeberg (M.S.), Optimal Design of Validation Experiments for Calibration and Validation

of Complex Numerical Models, (August 2014).


8/10


Page8

Parker Shields (M.S.), Role of Robustness to Uncertainty and Fidelity to Data in Experiment

based Validation of Numerical Models, (December 2013).

Lei Wang (M.S.), Probabilistic Back Analysis of Geotechnical Systems, Co-Advised with Dr.

Juang, (August 2013).

Md. Chowdhurry (M.S.) Vibration Based Structural Health Monitoring of Bridge Pier andAbutment Scour, Co-Advised with Dr. Khan, (August 2013).

Ashley Haydock (M.S.), Noise-Insensitive Prognostic Evaluation of Historic Masonry Structures,

(May 2013).

Tun Li (M.S.), Load Carrying Capacity Assessment of a Masonry Dome, (August 2012).

Sarah Dalton (M.S.), Robust Structural Health Monitoring for Infrastructure Management, Co-

Advised with Dr. Juang, (December 2011).

Saurabh Prabhu (M.S.), Structural Health Monitoring of Historic Masonry Monuments, (August

2011).

Kendra Van Buren, (M.S.) Structural Health Monitoring of Shell Type Wind Turbine Blades, (May2011).

Current Doctoral Students

Wenping Gong (Ph.D. candidate), Robust Geotechnical Design of Drilled Shafts, Co-Advised

with Dr. Juang, (Expected graduation date: December 2014).

Saurabh Prabhu (Ph.D. candidate), Data Assimilation Techniques for Structural Health

Monitoring Applications as Applied to Masonry Monumental Structures, (Expected graduation

date: May 2015).

Garrison Stevens(Ph.D. student), Experiment-based Validation of Strongly Coupled Numerical

Models, (Expected graduation date: May 2016).

Jie Lu (Ph.D. student), Robust modeling framework for rehabilitating transportation infrastructure

under uncertainty, Co-Advised with Dr. Huang, (Expected graduation date: May 2016).

Sepideh Yazdekhasti (Ph.D. student), To be determined, Co-Advised with Drs. Piratla and Khan,

(Expected graduation date: May 2016).

Xiaoyu Hu (Ph.D. student), Damage Detection in Steel Structures Using Bayesian Calibration

Techniques, (Expected graduation date: December 2016).

Greg Roche (Ph.D. student), Multi-objective Model Calibration Considering Fidelity andRobustness, (Expected graduation date: December 2016).

Liz Wheeler (PhD. Student), Structural Health Monitoring of off-shore Wind Turbine Blades,

(Expected Graduation date December 2017).

Tunc Kulaksiz (PhD. Student), Role of Complexity in Predictive Modeling: Validation and

Uncertainty Quantification, (Expected Graduation date May 2018).


9/10


Page9

Audra Keisling (Ph.D. student), To be determined, Co-Advised with Dr. Klotz, (Expected

graduation date: December 2017).

Tim Parker (Ph.D. student, part time), Ductility-sensitive Rehabilitation of Historic Masonry

Monuments, (Expected graduation date: May 2016).

Current Masters Students

Robert Roper (M.S. student), Impact Resistance of Steel Decks, (Expected graduation date:

December 2014).

Seth Adams (M.S. student), An Integrated Numerical and Experimental Study: Structural

Behavior of Dry-Stacked Systems, (Expected graduation date: May 2015)

Vallabh Chakhadrar (M.S. Stuent), Multi-scale Modeling and Analysis of Masonry Systems,

(Expected graduation date: December 2015)

Visiting Students

Baptiste Devaux, (Ph.D. candidate), Universit de Franche-Comt, Besancon, France (January-

May 2014)

UNIVERSITY SERVICE

Committees

Department: Member, Advisory Committee (2013- present)

Member, Graduate Program Committee (2011- present)

Member, Diversity and Outreach Committee (2010- 2013)

Member, Scholarships and Awards Committee (2010- 2013)

Member of Faculty Search Committees (three times) (2011- 2012)

Elected Member of the Department Chair Search Committee (2013)

College: Deans Advisory Council (2013- present)

University: Elected Member, University Assessment Committee (2011- 2014)

Elected Member, University Awards Committee (2014- present)

Elected Member of the Vice-President of Research Search Committee (2014-

present)

TEACHING

CE 301, Structural Analysis

CE 299/399/499, Creative Inquiry on Structural Health Monitoring

CE 401/601, Matrix Structural Analysis


10/10


Page10

CE 404/604, Masonry Structural Design

CE 806, Structural Dynamics

CE 809, Structural Health Monitoring

Wednesday, November 12, 2014

Atamturktur Resume

Documents

Transcript of Atamturktur Resume