AT070TN83 V.1 (標準版) 0510 - eLinux · PDF file“2.500W”. Modify panel power...

The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX DISPLAY CORPORATION LCD MODULE
SPECIFICATIONSPECIFICATIONSPECIFICATIONSPECIFICATION
Customer:
Model Name: AT070TN83 V.1
SPEC NO.: A070-83-TT-11
Date: 2007/05/11
Version: 01
Preliminary Specification
Final Specification
Option
AT070TN83 V.1 LCM (TTL T-con with LED Driver)
For Customer s Acceptance
Approved by Comment

INNOLUX
InnoLux copyright 2004 All rights reserved, Copying forbidden.
Record of Revision
Version Revise Date Page Content
Pre. Spec. 01 2006/12/05 Initial release.
02 2007/03/05 2 Add Note 1,2,3 Modify TTL connector model from FH19S-40S-0.5SH to FH19SC-40S-0.5SH
3
Add Note 4 Add I: input, O: output, P: power
6 Add Backlight Driving Conditions
16 Add Note 4
18 Modify TTL connector model in the Mechanical Drawing
Final-spec.01 2007/05/11 1
Modify backlight power consumption from 1.728W to 2.500W. Modify panel power consumption from 0.990W to 0.825W.
5 Add the Max.value of VLED.
6
Modify the Typ.value of Icc from300mA to 250mA and Max.value from350mA to 300mA. Modify IL to ILED and the value from 180mA to 500mA. Add Max.value of ILED. Add Note 2,Note 3. Modify Note 5.
12 Modify test condition 1.
14 Modify Note 6.
19 Add the weight of corrugated board.

INNOLUX
Contents
1. General Specifications............................................................................................................1
2. Pin Assignment.......................................................................................................................2
3. Operation Specifications.........................................................................................................5
3.1. Absolute Maximum Ratings..............................................................................................5
3.2. Typical Operation Conditions...........................................................................................6
3.3. Power Sequence .............................................................................................................7
3.4. Timing Characteristics .....................................................................................................8
3.4.1. Timing Conditions....................................................................................................8
3.4.2. Timing Diagram .....................................................................................................10
4. Optical Specifications............................................................................................................12
5. Reliability Test Items.............................................................................................................16
6. General Precautions.............................................................................................................17
6.1. Safety .............................................................................................................................17
6.2. Handling .........................................................................................................................17
6.3. Static Electricity ..............................................................................................................17
6.4. Storage...........................................................................................................................17
6.5. Cleaning .........................................................................................................................17
7. Mechanical Drawing .............................................................................................................18
8. Package Drawing .................................................................................................................19
8.1. Packaging Material Table ...............................................................................................19
8.2. Packaging Quantity ........................................................................................................19
8.3. Packaging Drawing ........................................................................................................20

INNOLUX SPEC NO.: A070-83-TT-11 PAGE: 1/20
1. General Specifications
No. Item Specification Remark
1 LCD size 7.0 inch(Diagonal)
2 Driver element a-Si TFT active matrix
3 Resolution 800X3(RGB)X480
4 Display mode Normally white, Transmissive
5 Dot pitch 0.0635(W)X0.1905(H) mm
6 Active area 152.4 (W)X91.44 (H) mm
7 Module size 165(W)X104(H)X5.5(D) mm Note 1
8 Surface treatment Anti-Glare
9 Color arrangement RGB-stripe
10 Interface Digital(TTL)
11 Backlight power consumption
2.500W(Typ.) Note 3
12 Panel power consumption 0.825W(Typ.) Note 2
13 Weight 130g (Typ.)
Note 1: Refer to Mechanical Drawing. Note 2: Including T-con Board power consumption. Note 3: Including LED Driver power consumption.

2. Pin Assignment
TFT LCD Panel Driving Section TTL Connector is used for the module electronics interface. The recommended model is FH19SC-40S-0.5SH manufactured by Hirose.
Pin No.
Symbol I/O Function Remark
1 VLED P Power voltage for LED Driver
2 VLED P Power voltage for LED Driver
3 ADJ I Adjust the led brightness with PWM Pulse Note 1,2
4 GLED P Ground for LED circuit
5 GLED P Ground for LED circuit
6 VCC P Power voltage for digital circuit
7 VCC P Power voltage for digital circuit
8 MODE I DE or HV mode control Note 3
9 DE I Data enable
10 VS I Vsync signal input
11 HS I Hsync signal input
12 GND P Power ground
13 B5 I Blue data input (MSB)
14 B4 I Blue data input

19 B0 I Blue data input(LSB)
21 G5 I Green data input(MSB)
22 G4 I Green data input
27 G0 I Green data input(LSB)
29 R5 I Red data input(MSB)
30 R4 I Red data input
35 R0 I Red data input(LSB)
37 DCLK I Sample clock
39 L/R I Select left or right scanning direction Note 4
40 U/D I Select up or down scanning direction Note 4
I: input, O: output, P: power

Note1: ADJ adjust brightness to control Pin,Pulse duty the bigger the brighter.
Note 2: ADJ signal=0~3.3V,operation frequency:100~300Hz.
Note 3: DE Mode, Mode=H,HS floating and VS floating HV Mode, Mode=L and DE floating
Note 4: Selection of scanning mode
Setting of scan control input
U/D R/L
Scanning direction
GND VCC Up to down, left to right
VCC GND Down to up, right to left
GND GND Up to down, right to left
VCC VCC Down to up, left to right

3. Operation Specifications
3.1. Absolute Maximum Ratings
Values
Item Symbol
Min. Max.
Unit Remark
VCC -0.3 6.0 V Power voltage
VLED - 5.5 V
Input signal voltage VI -0.3 6.3 V
Operation Temperature TOP -20 70
Storage Temperature TST -30 80
Note: The absolute maximum rating values of this product are not allowed to be exceeded at any times. A module should be used with any of the absolute maximum ratings exceeded, the characteristics of the module may not be recovered, or in an extreme condition, the module may be permanently destroyed.

AT070TN83 V.1 (標準版) 0510 - eLinux · PDF file“2.500W”. Modify panel power...

Documents

Transcript of AT070TN83 V.1 (標準版) 0510 - eLinux · PDF file“2.500W”. Modify panel power...