AT-7000 Series Multi-channel Digital Telemetry...AT-7000 Series Multi-channel Digital Telemetry...
2
AT-7000 Series Multi-channel Digital Telemetry Highlights The Accumetrics AT–7000 Series Multichannel Telemetry System allows machine designers and maintenance personnel to measure exactly what is happening on the rotating components of their equipment while it is in operation --without the need for slip rings. The system can combine any customized mix of ordinary sensors: strain gages, thermocouples, RTDs, accelerometers, as well as motor/generator field voltages, currents and ground fault currents. The received data is continuously streamed to the user as analog (+/- 10V or 4/20mA) or digital data. Features: n Adaptable to RTD, thermocouple, strain gage, accelerometer, pressure sensor, and voltage inputs n Induction powered (no batteries) n Mix of sensors n Robust split clamp collar, with standardized transmitter modules (other designs available) n High accuracy and data integrity, with 12 bit digital resolution and anti-alias filtering on the rotor n Wide selection of gains and bandwidths n On the fly shunt calibration n Analog and digital system data outputs Overview: Sensor signals are amplified, anti-alias filtered and 12 bit digitized while on the rotor. A data stream of digital data is wirelessly transferred off rotor by close proximity RF transformer coils (no rotation is needed). The digital data streams are carried by a coaxial cable to the remote receiver for digital output or conversion to analog voltage (+/- 10V typically). Software may be provided for control and data archiving of thermocouple data. Accumetrics, Inc.: A PCB Group Company n Dependable wireless replacement for sliprings n Digitizing on the rotor n Modular construction allows for a variery of sensors to be monitored n Rugged construction for high G force applications Typical Applications General purpose rotating shaft sensor applications where multiple channels are needed: n Motor temperature monitoring n Field voltage and currents on brushless designs n Multichannel strain measurement n ICP/IEPE accelerometer measurement n Ground fault leakage current n Torsional vibration Visit us at www.accumetrix.com 6 British American Boulevard Suite 103-F , Latham, NY 12110 [email protected] 518-393-2200 Toll-free: 888-684-0012 Multi-channel rotor telemetry ACCUMETRICS A PCB GROUP COMPANY
Transcript of AT-7000 Series Multi-channel Digital Telemetry...AT-7000 Series Multi-channel Digital Telemetry...
AT-7000 Series Multi-channel Digital Telemetry
Highlights
The Accumetrics AT–7000 Series Multichannel Telemetry System allowsmachine designers and maintenance personnel to measure exactly what ishappening on the rotating components of their equipment while it is inoperation --without the need for slip rings. The system can combine anycustomized mix of ordinary sensors: strain gages, thermocouples, RTDs,accelerometers, as well as motor/generator field voltages, currents and groundfault currents. The received data is continuously streamed to the user as analog(+/- 10V or 4/20mA) or digital data.
Features:
n Adaptable to RTD, thermocouple, strain gage, accelerometer, pressure sensor, and voltage inputsn Induction powered (no batteries)n Mix of sensorsn Robust split clamp collar, with standardized transmitter modules (other designs available)n High accuracy and data integrity, with 12 bit digital resolution and anti-alias filtering on the rotorn Wide selection of gains and bandwidthsn On the fly shunt calibrationn Analog and digital system data outputs
Overview:Sensor signals are amplified, anti-alias filtered and 12 bit digitized while onthe rotor. A data stream of digital data is wirelessly transferred off rotor byclose proximity RF transformer coils (no rotation is needed). The digital datastreams are carried by a coaxial cable to the remote receiver for digital outputor conversion to analog voltage (+/- 10V typically). Software may be providedfor control and data archiving of thermocouple data.
Accumetrics, Inc.: A PCB Group Company
n Dependable wireless replacement for sliprings
n Digitizing on the rotor
n Modular construction allows for a variery of sensors to be monitored
n Rugged construction for high G force applications
Typical Applications
General purpose rotating shaft sensor applicationswhere multiple channels are needed:n Motor temperature monitoringn Field voltage and currents on brushless designsn Multichannel strain measurementn ICP/IEPE accelerometer measurementn Ground fault leakage currentn Torsional vibration
Visit us at www.accumetrix.com 6 British American Boulevard Suite 103-F, Latham, NY 12110 [email protected]
518-393-2200 Toll-free: 888-684-0012
Multi-channel rotor telemetry
ACCUMETRICSA PCB GROUP COMPANY
Split clamp-collar, multiple modules,epoxy-glass (G10) construction, and
stationary loop coil
Accumetrics, Inc.: A PCB Group Company
6 British American Boulevard Suite 103-F, Latham, NY 12110Phone 518-393-2200 n Toll-free 888-684-0012Fax 716-684-0987 n Email [email protected]
Website www.accumetrix.com© 2015 PCB Group, Inc. In the interest of constant product improvement, specifications are subject to changewithout notice. PCB, ECHO, ICP, Modally Tuned, Spindler, Swiveler and TORKDISC are registered trademarksof PCB Group. SoundTrack LXT, Spark and Blaze are registered trademarks of PCB Piezotronics. SensorLineis a service mark of PCB Group. All other trademarks are property of their respective owners.
Accumetrics-AT7000-0615 Printed in U.S.A.
ACCUMETRICSA PCB GROUP COMPANY
About Accumetrics:Accumetrics Inc., was founded in 1992, and became a part of the PCB Group in 2013.The company designs and assembles digital telemetry systems that transmit sensordata from rotating structures using wireless techniques, preserving the integrity of thedata even in environments with high levels of electromagnetic interference.
We can provide a range of solutions from single channel products, such as strain gagetorque measurements, to advanced multichannel systems that transmit data fromhundreds of sensors.
visit us online at www.accumetrix.com
