assuring SAFETY constructing QUALITYterajuies.com.my/wp-content/uploads/2016/09/TIESsb_COMPANY...
Transcript of assuring SAFETY constructing QUALITYterajuies.com.my/wp-content/uploads/2016/09/TIESsb_COMPANY...
assuring SAFETY
constructing QUALITY
TERAJU Inspection and Engineering Services Sdn Bhd (TERAJU) was founded in year
2013 as Malaysian Private Limited company with he core business of oilfield inspection
and testing services in West Malaysia.
Seeing the demand and gaining potential for further expansion, TERAJU has
broadened its scope of services.
Our strength lies in skilled labor, employee competency, commitment,
up-to-date equipment and years of gained expertise in Oil and Gas
service field.
In a short time span, we gained the trust and support of our
customers, suppliers and substantially expanded in staff
headcount and turnover.
TERAJU is proud to have become a company that is known
for its solid and professional approach to providing value added services.
VISION
TERAJU aspires to become a dynamic, globally recognized and
Preferred one stop NDT and Inspection Service Provider in
Fabrication of Oil and Gas, Petrochemical and Power Utility
industries.
To provide quality services that meets the expectations of
our esteemed customers.
MISSION
To promote a safer World, Knowledge sharing and Cooperation.
To build long term relationships with our customers and provide exceptional services
by pursuing business through dedication, innovation and experience.
OBJECTIVES and GOALS
TERAJU is committed to:
Providing innovative and cost-effective Asset integrity
services of the highest quality in the industry. We believe
that if a better service can be provided, then a good service
is just not enough;
Building good brand in the field of Inspection and Testing Services;
Becoming a key player in the industry.
Managing Director
MR. HABIBULLAH AWANG
Executive Director
MR. AMIRURROFIQ AWANG
OPERATIONS
Assistant Level-II Inspector
MR. MD. NAJMI
MR. MD. SUFIAN
Assistant Technician
MR. MD. NAZRI
MR. MD. AZUAN
MR. MD. HAFIEFY
MR. ZULHAFIZI
ADMINISTRATION
Accounting Executive
MS. SITI NUR IZATI
MR. MD. SHAHRUL
Admin and Procurement
MS. SITI AMIMAH
MS. TG MAISARAH
MS. NURZALIA
BD & SALES
Business Dev. Manager
MR. KLYCH MAMMEDOV
Business Dev. Head
MR. AMIRURROFIQ AWANG
Inspector QA/QC
MR. MD. NURSHAFFIQ
TERAJU’s spectrum of services covers the following:
Lifting Gear Testing and Inspection;
ASCEND Lifting Gear Management Software;
Plant Inspection and Monitoring;
Plant General Maintenance;
Proof Load Testing;
Magnetic Particles Inspection (MPI);
Hydrostatic Testing;
Pressure Testing;
Borescope Inspection;
Videoscope Inspection and Testing;
Ultrasonic Thickness Measurement (UTTM);
Advance Ultrasonic Testing;
Radiography Inspection;
Eddy Current Inspection;
Wirescope;
Hardness Testing;
Dye Penetrant Inspection;
Rope Access;
Heat Exchanger Specialized Maintenance;
Industrial Cleaning;
Boiler and Unfired Pressure Vessel Maintenance;
DNV 2.7-1 Cargo Carrying Units (CCU) Supply and
Maintenance;
ISO Tank Supply and Maintenance;
CCU and Tank Cleaning Services;
BS EN 12079 Standard Compliant Fabrication;
Blasting and Painting;
Minor Construction / Demolition Services;
Waste Management;
Storage / Yard Space Rental.
Lifting Gear Testing and Inspection
This includes visual inspection and strength
stress test of lifting equipment, such as hook,
shackles, ratchets, buckles, slings hoists, clamps
and similar.
Plant Inspection and Monitoring
Vibration
Infrared Thermograph Inspection
Sound Measurement
Plant General Maintenance
Plant turnaround works
Scaffolding
Insulation
Painting
Electrical Instrumentation and
Control
Proof Load Testing
We provide load testing up to 100 tonnes, using
equipment that meets EN12079, DNV 2.7-1, BS and APL
lifting specifications. Our lifting services cover all types of
Cargo Carrying Units (CCU) complete with lifting gears.
Magnetic Particles Inspection (MPI)
MPI is a process for detecting surface and slightly
subsurface discontinuities in ferromagnetic
materials such as iron, nickel, cobalt, and some
of their alloys. The process puts a magnetic field
into the part.
Hydrostatic Testing
Used in pressure vessels such as pipelines,
plumbing, gas cylinders, boilers and fuel tanks
can be tested for strength and leaks. A
hydrostatic test is performed by using water as
the test medium.
Pressure Testing
Similar to hydrostatic testing except
it is pneumatic. This test uses air, nitrogen,
or any non-flammable and nontoxic gas as the
test medium.
Borescope Inspection
This inspection uses borescope tools, used to view
areas that would otherwise not be visible. A
borescope is inserted into the item being
evaluated without destroying the item of interest.
Videoscope Inspection
Offers the best image quality available in
flexible scopes. The scopes are flexible so that
they can be inserted into many applications,
from gas turbines to process and high purity
piping. They include distal tip articulation and
interchangeable optical tip adapters to
maximize image quality in the specifics of your
application.
Ultrasonic Thickness Measurement (UTTM)
Ultrasonic NDT characterizes material thickness,
integrity or other physical properties by means
of high frequency sound waves.
Advance Ultrasonic Testing (UT)
A new portable mechanics free PC assisted
multi-technology ultrasonic inspection system
was created to allow the inspector to perform
manual ultrasonic testing with high reliability
and objective true-to-scale data presentation.
Radiography Inspection
Industrial radiography is the use of ionizing radiation
to view objects in a way that cannot be seen
otherwise. It is a method of inspecting materials for
hidden flaws by using the ability of short X-
rays and gamma rays to penetrate various
materials.
Eddy Current Inspection
It is one of several NDT methods that uses the
principal of "electromagnetism" as the basis for
conducting examinations. Several other
methods such as Remote Field Testing (RFT), Flux
Leakage and Barkhausen Noise also use this
principle.
Wirescope
Wirescope is a package used to check for
pass/fail results in networking applications and
generic cabling standards. Considering how
complicated fiber optic network test limits get,
having a tester that “knows” these standards are
a practical necessity
Hardness Testing
Hardness is a characteristic of a material, not a
fundamental physical property. It is defined as
the resistance to indentation, and it is
determined by measuring the permanent depth
of the indentation.
Dye Penetrant Inspection (DPI)
Liquid Penetrant Testing is a surface testing
method. All non-porous materials can be inspected
by this method. In order to be detected, the
defect must be open to surface. This is an easy and
cheap testing method most widely used in all
industries.
Rope Access
Rope access is a form of work positioning, initially
developed from techniques used in climbing and
caving, which applies practical ropework to allow
workers to access difficult-to-reach locations
without the use of scaffolding, cradles or an aerial
work platform.
Heat Exchanger Specialized Maintenance
Heat Exchanger Maintenance
Mechanical Cleaning
Specialized Method for tube plugging
Chemical cleaning
Tube re-tubing
Mechanical cleaning
Industrial Cleaning
The scope of work is mainly the deep
cleaning of heavy industrial facilities that
requires heavy duty chemicals,
pressurized equipment and tons of expertise.
Boiler and Unfired Pressure Vessel Maintenance
Heat Exchanger and Boiler Service and Maintenance
Tube re-tubing
Mechanical Cleaning
DNV 2.7-1 Cargo Carrying Units (CCU)
Supply and Maintenance
As of May 2016, TERAJU is offering it’s fleet of
various DNV 2.7-1 CCUs for rental and sales.
Oilfield solutions units for dry, liquid storage
and a variety of cabins can be tailor made
up to customers’ demand.
ISO Tank Supply and Maintenance
ISO Tank or T11 of up to 25 000L capacity is
suitable for carrying majority of non corrosive
liquid materials in Oil and Gas
industry. Corrosive or unstable cargoes may
require the vessels to be constructed from
special types of steel or specialty
lined. TERAJU has recently broadened its
specialization into ISO tank containers supply,
operation, repairs, (re)certification, and
cleaning.
BS EN 12079 Standard Compliant Fabrication
Blasting and Painting
TERAJU performs minor fabrication and maintenance in-
house up to customers’ specification requirements. Our
skilled personnel has years of fabrication experience and delivers such projects in a timely and accurate manner.
Minor Construction / Demolition Services
Plans and CAD drawings
Interlocking
Flooring
Foundation works
Mechanical works
Plumbing
Insulation
Proofing
Demolition
Debris removal
Waste Management
Dry waste disposal
Liquid waste disposal
Storage / Yard Space Rental
TERAJU offers flexible schemes of guarded open
and roofed yard space rental, ranging from as
low as 1sqft/day. We can facilitate all types of dry
and liquid goods storage and transportation,
tailor made up to customer needs.
TERAJU Inspection and Engineering Services Sdn. Bhd.
1051182-A
23-June-2013
www.terajuies.com.my
Company Name:
Registration Number:
Date of Incorporation:
Website:
Address: Headquarters / Operations Business Development / Sales Unit
Lot 3689 and 3690, Kawasan Perindustrian E-8-6, Megan Avenue 1,
MIEL, Telok Kalong 24000 Kemaman, 189, Jalan Tun Razak
Terengganu Darul Iman, Malaysia. 50400 Kuala Lumpur, Malaysia
Tel: +6019 916 2636 Tel: +6 03 2333 8881
Tel/Fax: +6 09 863 2636 Fax: +6 03 2333 8899
e-mail: [email protected] e-mail: [email protected]