Assa Electromechanical Locks - Palmett · 8 An ASSA ABLOY Group company Solid 816, 823, 824 –...

AssaElectromechanical Locks

An ASSA ABLOY Group company

2

Assa AB manufactures and develops locks and security systems for the world’spublic building market. New regulations and local standards require us tocontinuously adapt to a changing world.

Assa products are recognised by architects and end users around the world forquality, security, design and awareness of the environment.

QualityAssa products are supplied in accordance with well-documented qualityprocedures.

Assa is certified according to ISO 9001.

Security and DesignWhen your investment in technology, functionality and performance reflects thevalue of the protected property, you have the right security.

EnvironmentOur environmental commitment is based on a view where considerations aremade around technical, economical and ecological ef fects. Assa is certifiedaccording to ISO 14001.

Assa - The Security Company

3

ContentElectric Strikes - General description .........................................................4

Heavy Duty Electric strikes .......................................................................... 6

Universal Electric Strikes ...........................................................................11

Standard Duty Electric strikes ...................................................................12

Simple Electric strikes................................................................................ 18

Dead bolt Electric strikes ...........................................................................22

Code locks ...................................................................................................23

Card locks.................................................................................................... 24

Solenoid locks.............................................................................................25

Motor locks.................................................................................................. 31

Magnets and accessories .......................................................................... 38

SymbolsThe lockcase complies with theSwedish standard SS 3522 Grade 2.

The lockcase complies with theSwedish standard SS 3522 Grade 3.

Complies with the requirements of BS3621 (1980) if supplied with ap-propriate cylinder and accessorytype.

Available with 50 mm backset.

Lockcase can be used with Assa ovalcylinder.

Lockcase can be equipped withinternal microswitch.

Assa Heavy Duty

Assa Classic

Lockcase suitable for emergencydoors*.

Lockcase can be combined withelectric strike.


Lockcase suitable for fire doors*.

*Check local regulations.


Lockcase can be used with Assaround cylinder.

4

Electric strikes

Electric strikes are probably the most common product used in doorsthat have an electric locking mechanism. Electric strikes provide a goodlocking solution typically for doors that are used very frequently. Durabilityand quick operation are preferred over security. Electric strikes are alsoa good choice for doors that are situated in a tough environment.

Our electric strikes are well known for high quality, fast release anddurability and are available in three different grades:

Heavy dutyThe heavy duty strike is the most powerful strike in the range and shouldbe used in applications where high security and resistance to vandalismis most important.

Standard/Universal dutyThe standard/universal strike is an ideal solution in many doors wherereliability is a major consideration but where high security strikes are notrequired.

SimpleThe use of a simple strike is mainly to protect areas inside a buildingagainst unauthorised access and where the perimeter protection iscovered by other products.

FUNCTIONSFail lockedThis function means that the electric strike will be locked only as long asthe power is off. In case of a power failure, the strike will remain locked.The strike will open as soon as it receives power.

Fail unlockedThis function means that the electric strike will be locked only as long asthe power is on. In case of a power failure, the strike will open. The strikewill lock as soon as it receives power. This function is typically used inemergency exit doors.

Day lockingThe most important attribute for a day lock is quick opening and gooddurability rather than high security. Typically an electric strike or a solenoidlock is used as a day lock as both products provide durable solutions fordoors with high frequent usage.

Night lockingA night lock is typically a motor lock rather than an electric strike or asolenoid lock. The motor lock has a much higher security level comparedto electric strikes and solenoid locks the dead bolt function. It may beremote controlled, thus providing a automatic night-time locking.

An ASSA ABLOY Group company 5

OverviewHeavy Duty Electric Strike

Standard Electric Strike

Simple Electric Strike

* Not suitable for multi-strikes

827 KB141, 5141,8141,331, 5331

70, 57071, 571

14, 514,514, 5114

Heavy DutyFail locked Fail unlocked

No microswitch 141 331One microswitch 5141 5331Two microswitch 8141 -Power 12 V, 24 V

StandardFail locked Fail unlocked

No microswitch 75/ 70 75/ 71One microswitch 575/ 570 575/ 571Power 12 V, 24 V

SimpleFail locked Fail unlocked Impuls

No microswitch 14 114 24One microswitch 514 5114 524Power 12 V, 24 V 8 V, 24 V

An ASSA ABLOY Group company6

HEAVY DUTY ELECTRIC STRIKES

Assa heavy dutyelectric strikeshave a built-in fusethat guarantees theelectric strikevibration-proof,greatly improvingsecurity.

ApplicationFor use on external door entry systems where high security andresistance to vandalism is paramount, such as high rise residentialaccommodation, multiple occupancy office buildings, elderlypersons units, banks or other high-frequency use doors.

FunctionSolid 141DC continuous duty fail-locked.The strike opens when the current is on and locks automaticallywhen the current is switched off.

Solid 5141DC continuous duty fail-locked with built-in microswitch.The strike opens when the current is on and locks automaticallywhen the current is switched off.A microswitch monitors the latchbolt engagement.

Solid 8141DC continuous duty fail-locked with two built-in microswitches.The strike opens when the current is on and locks automaticallywhen the current is switched off.One microswitch monitors the latchbolt engagement, and the othermonitors the deadlocking of the pivoting staple, thus giving 100%assurance that the door is properly secured.

Features

• Body, faceplate and pivoting staple are manufactured fromhigh grade steel.

• Available in 12 and 24V DC versions.• Very high strength – resists minimum 10,000 N (1 000 kg) side

pressure on the pivoting staple.• Tested to 1,000,000 opening cycles.• Protected against manipulation by an impact/vibration bar.• Current consumption 300 mA for 12V DC versions or 160 mA

for 24V DC version.

Solid 141, 5141, 8141 – Fail locked

Fitting example

��

��

��

Solid5141

Solid Face plate 824

Assa 5585

Important!The gap between the electric strike and the door should be 3 mm+/- 1 mm.Ensure that the lock case anti-thrust bolt is held in by the strikefaceplate when the door is closed. There should be a gap of0.5-1.5 mm between the lock case latch bolt and the pivoting stapleof the strike.

Diode

Coil

We recommend fittingof a diode between thepower supply unit andthe electric strike.

No microswitch. One microswitch. Two microswitches.

All microswitches are of single-poledouble-throw type. They maytherefore be connected in either thenormally-open or normally-closedposition. Maximum power rating for allmicroswitches are 2A at 24V DC.The electric strike shall be suppliedwith direct current voltage, maximum+/- 10% deviation from the nominalcurrent.


��

��

��

ApplicationOffer true fail unlocked function.For use where a high security requirement must be balanced withthe need for safety, and yet retaining high resistance to vandalism.For example, high rise residential accommodations, multipleoccupancy office buildings, elderly persons units where quickevacuation and access for the emergency services may benecessary.

FunctionSolid 331DC continuous duty fail unlocked.The strike is closed as long as the current is on and opensautomatically when the current is switched off.Will open even when a side pressure up to 5,000 N (500kg) isapplied.

Solid 5331DC continuous duty fail unlocked with built in microswitch.The strike is closed as long as the current is on and opensautomatically when the current is switched off.A microswitch monitors the latchbolt engagement.Will open even when a side pressure up to 5,000 N (500kg) isapplied.

Features


• Available in 12 and 24V DC versions.• Very high strength – resists minimum 10,000 N (1 000 kg) side

pressure on the pivoting staple.• Tested to 1,000,000 opening cycles.• Protected against manipulation by an impact/vibration bar.• Current consumption 490 mA for 12V DC versions or 230 mA

for 24V DC version.

Solid 331, 5331 – Fail unlocked

The strike openeven whensubjected to a doorpressure of up to5000 N (500 kg).


Solid 5331


Assa 5585

Fitting example


Diode

Coil


No microswitch. One microswitch.

All microswitches are of single-pole double-throw type. They maytherefore be connected in either the normally-open or normally-closed position. Maximum power rating for all microswitches are2A at 24V DC.The electric strike shall be supplied with direct current voltage,maximum +/- 10% deviation from the nominal current.


Solid 816, 823, 824 – Face plates

Dimensions

GeneralThe choice of faceplate is determined by a number of differentfactors that together provide the optimum combination of door/lock/ faceplate.The frame/door leaf material can vary, e.g. wood, aluminium orsteel, and the door’s profile (square edged or rebated) must betaken into consideration. In order to be able to choose the electricstrike and faceplate you must also know what type of mechanicallock is employed, whether it is a single or double latch lock, andalso what the tongue measurement is between the leading edgeof the door leaf and the lock’s bolt.

Application

• Faceplate 816 is designed for wooden frames together with asingle latch lock.

• Faceplate 823 is fitted to steel and aluminium frame doorstogether with single latch locks.

• Faceplate 824 is designed for wood and steel frames togetherwith single latch locks.

Face plate 816 Face plate 823 Face plate 824


Features

• Faceplate is manufactured from high grade steel.• Used in combination with Heavy Duty electric strikes.

Solid 816 Solid 823 Solid 824



Solid 840, 841, 842 & 843 – Face platesGeneral

The choice of faceplate is determined by a number of differentfactors that together provide the optimum combination of door/lock/ faceplate.The frame/door leaf material can vary, e.g. wood, aluminium orsteel, and the door ’s profile (square edged or rebated) must betaken into consideration. In order to be able to choose the electricstrike and faceplate you must also know what type of mechanicallock is employed, whether it is a single or double latch lock, andalso what the tongue measurement is between the leading edgeof the door leaf and the lock’s bolt.

Application

• Faceplate 840 is designed for SapaFront building system2050/2071 (opening in)

• Faceplate 823 is designed for SapaFront building system 2071(opening out)

• Faceplate 842 is designed for SapaFront building system 2060

Face plate 840 Face plate 841 Face plate 842 Face plate 843

Dimensions

Features

• Faceplate is manufactured from high grade steel.• Used in combination with Heavy Duty electric strikes.• Used together with single latch locks only.• Narrow profile locks must be with 22 mm faceplate.

Solid 840 Solid 841 Solid 842 Solid 843



Solid 827KB – Face plate

Dimensions


Features

• Faceplate is manufactured from high grade steel.• Can be fitted to wooden and steel frames.• Used in combination with Heavy Duty electric strikes.• Faceplate 827KB is used together with lock face plate

5585KS, which replaces the standard lock case face plate.

Solid 827KB is aconnecting joint forelectrical locking. Theconnecting functionmakes it difficult to breakthe door opening apartand thereby increasesprotection against entryconsiderably.

Face plate 5585KSFace plate 827KS

ApplicationFaceplate 827KB is a high security faceplate that connects thedoor to the frame, offering a secure locking solution. For use onexternal door entry systems where high security and resistance tovandalism is paramount.


UNIVERSAL ELECTRIC STRIKES

Solid 75 & 575 – MultiApplication

Suitable for almost any situation as these strikes offers a trueflexible solution. Solid 75 and 575 strikes will accept a wide rangeof power inputs as well as offering both fail-locked or fail-unlockedfunctions in the same strike.For use on door entry systems such as entrance doors to a highrise residential accommodation or internal locking within officebuildings and other commercial buildings.

FunctionSolid 75Continuous duty AC or DC, fail-locked or fail-unlocked.The strike may be set either to open when the current is on andlock automatically when the current is switched off (fail-locked);or be closed as long as the current is on and open automaticallywhen the current is switeched off (fail unlocked).Changing the mode is achieved by loosening a screw, sliding it toalternate position, and re-fastening.

Solid 575Continuous duty AC or DC, fail-locked or fail-unlocked with built-in microswitch.The strike may be set either to open when the current is on andlock automatically when the current is switched off (fail-locked);or be closed as long as the current is on and open automaticallywhen the current is switeched off (fail unlocked).Changing the mode is achieved by loosening a screw, sliding it toalternate position, and re-fastening.A microswitch monitors the latchbolt engagement.

Features


• Accepts 12 to 24V AC or DC.• Can be used both as fail-locked and fail-unlocked.• Very high strength – resists minimum 7,000 N (700 kg) side

pressure on the pivoting staple.• Tested to 500.000 opening cycles.• Current consumption 185-340 mA (24-12V AC/DC).• Used in combination with single or double latch bolt lock

cases.

Assa 1560 SolidStolpe 730

Solid 575Solid 575


Assa 1560

Fitting example


Nomicroswitch.

Onemicroswitch.

All microswitches are of single-pole double-throw type. Theymay therefore be connected ineither the normally-open ornormally-closed position.Maximum power rating for allmicroswitches are 2A at 24V DC.The electric strike shall besupplied with direct currentvoltage, maximum +/- 10%deviation from the nominalcurrent.


STANDARD ELECTRIC STRIKES


Solid 570

Solid 70 & 570 – Fail lockedApplication

For use on door entry systems where security and resistance tovandalism is important, such as entrance doors to a high riseresidential accommodation or internal locking within office buildingsand other commercial buildings.

Features

• Faceplate manufactured from high grade steel.• Pivoting staple made of bronze, body made of zinc alloy.• Available in 12 and 24V DC versions.• High strength – resists minimum 7,000 N (700 kg) side

pressure on the pivoting staple.• Tested to 500,000 opening cycles.• Current consumption 230 mA for 12V DC versions or 140 mA

for 24V DC version.

FunctionSolid 70DC continuous duty fail-locked.The strike opens when the current is on and locks automaticallywhen the current is switched off.

Solid 570DC continuous duty fail-locked with built-in microswitchThe strike opens when the current is on and locks automaticallywhen the current is switched off.A microswitch monitors the latchbolt engagement.

Assa 1560


Solid 570

Diode

Coil


No microswich. One microswitch.


Fitting example





Solid 571

Solid 71 & 571 – Fail unlockedApplication

Offer true fail safe function.For use where a normal security requirement must be balancedwith the need for safety. For example, high rise residentialaccommodations, multiple occupancy office buildings, elderlypersons units where quick evacuation and access for theemergency services may be necessary.

FunctionSolid 71DC continuous duty fail unlocked.The strike is closed as long as the current is on and opensautomatically when the current is switched off.

Solid 571DC continuous duty fail unlocked with built in microswitch.The strike is closed as long as the current is on and opensautomatically when the current is switched off.A microswitch monitors the latchbolt engagement.

Features

• Faceplate manufactured from high grade steel.• Pivoting staple made of bronze, body made of zinc alloy.• Available in 12 and 24V DC versions.• High strength – resists minimum 7,000 N (700 kg) side


for 24V DC version.

Assa 1560


Solid 571

Diode

Coil




Fitting example




Solid 725, 730 & 731 – Face platesGeneral

The choice of faceplate is determined by a number of differentfactors that together provide the optimum combination of door/lock/ faceplate.The frame/door leaf material can vary, e.g. wood, aluminium orsteel, and the door’s profile (square edged or rebated) must betaken into consideration. In order to be able to choose the electricstrike and faceplate you must also know what type of mechanicallock is employed, whether it is a single or double latch lock, andalso what the tongue measurement is between the leading edgeof the door leaf and the lock’s bolt.

Application

• Faceplate 725 is suitable for door frames made of wood ormetal.



Dimensions

Face plate 725 Face plate 730

Face plate 731/17 Face plate 731/20Face plate 731/26

Features

• Faceplate is manufactured from high grade steel.• Used in combination with Standard Duty electric strikes.• Used together with double latch bolt locks.• Faceplate 731 in 3 different widths, 42 mm (731/17), 45 mm

(731/20) and 51 mm (731/26).

Solid725

Solid730

Solid731/17

Solid731/20

Solid731/26



Solid 732 & 733 – Face platesGeneral


Application



Face plate 732 Face plate 733/17

Dimensions

Features

• Faceplate is manufactured from high grade steel.• Used in combination with Standard Duty electric strikes.• Used together with double latch bolt locks.• Faceplate 733 in 3 different widths, 42 mm (731/17), 45 mm

(731/20) and 51 mm (731/26).

Solid 732 Solid 733/17 Solid 733/20 Solid 733/26

Face plate 733/20 Face plate 733/26



Solid 735 & 737 – Face platesGeneral

The choice of faceplate is determined by a number of differentfactors that together provide the optimum combination of door/lock/ faceplate.The frame/door leaf material can vary, e.g. wood, aluminium orsteel, and the door’s profile (square edged or rebated) must betaken into consideration. In order to be able to choose the electricstrike and faceplate you must also know what type of mechanicallock is employed, whether it is a single or double latch lock, andalso what the tongue measurement is between the leading edgeof the door leaf and the lock’s bolt.

Dimensions

Face plate 735

Application

• Faceplate 735 and 737 are suitable for door frames made ofmetal.

Face plate 737

Features

• Faceplate is manufactured from high grade steel.• Used in combination with Standard Duty electric strikes.• Used together with double latch bolt locks.

Solid 735 Solid 737



Solid ANSI – Face plates

Electric strike together with longfaceplate (174.5 mm) and shortfaceplate (123.7 mm) includingmounting clip illustrated.Extension lips are shownseparately.

ApplicationThe ANSI mounting kit makes the standard SOLID electric strikesfit with American, Canadian, British, Australian and Far East typesof locks (with up to 1/2” or 12 mm latch depth).These electric strikes are suitable for use on fire resistant doors(according to Swedish standards) in entrances for high riseresidential accommodation and inside in multiple occupancy officebuildings. It also fits where the electronic access control systemneeds to be supplemented by a mechanical deadlocking function.This would give increased physical security whilst restricting accessto keyholders - typical applications might include offices wheredaytime and nighttime security requirements differ.

Features

• Faceplate is manufactured from high grade steel.• Used in combination with Universal and Standard Duty electric

strikes.• Used together with double latch bolt locks.• Available in two versions, ANSI Long or ANSI Short• The standard ANSI lip measures 26.5 mm from the centre of

the electric strike to the edge of the lip and makes the doorclose flush with the frame. Where door/frame relationship isdifferent, one or more strike lip adapters may be added. Eachlip adapter are 25.4 mm.

• Very high strength – resists minimum 7,000 N (700 kg) sidepressure on the pivoting staple.

• Tested to 1,000,000 opening cycles.• Current consumption 230 mA for 12V DC versions or 140 mA

for 24V DC version.

Dimensions

HorizontalCentre

Max 77,7Max 52,3

25,4

25,4

26,5


SIMPLE ELECTRIC STRIKES

Solid 14 & 514 – Fail lockedApplication

For use in access control where reliability is a major considerationbut where the physical security strength of Heavy Duty or Standardstrikes is not required.For example computer rooms, plant rooms, laboratories or otherspecially designated areas of restricted access.

FunctionSolid 14DC continuous duty fail locked.The strike opens when the current is on and locks automaticallywhen the current is switched off.

Solid 514DC continuous duty fail locked with built-in microswitch.The strike opens when the current is on and locks automaticallywhen the current is switched off.A microswitch monitors the latchbolt engagement.

Assa 5585 Solid Face plate 510

Solid 514

Features

• Faceplate and pivoting staple manufactured from high gradesteel.

• Body made of zinc alloy.• Available in 12 and 24V DC versions.• Medium strength – resists up to 4,000 N (400 kg) side


for 24V DC version.

Diode

Coil



All microswitches are of single-pole double-throw type. Theymay therefore be connected in either the normally-open ornormally-closed position. Maximum power rating for allmicroswitches are 2A at 24V DC.The electric strike shall be supplied with direct current voltage,maximum +/- 10% deviation from the nominal current.

Fitting example




Solid 114 & 5114 – Fail unlockedApplication

For use in access control where the security requirement must bebalanced with the need for safety. For example computer rooms,plant rooms, laboratories or other specially designated areas ofrestricted access, particularly where quick evacuation access inan emergency may be necessary.

Features


• Body made of zinc alloy.• Available in 12 and 24V DC versions.• Medium strength – resists up to 4,000 N (400 kg) side

pressure on the pivoting staple.• Tested to 1,000,000 opening cycles.• Current consumption 190 mA for 12V DC versions or 110 mA

for 24V DC version.

FunctionSolid 114DC continuous duty fail unlocked.The strike is closed as long as the current is on and opensautomatically when the current is switched off.

Solid 5114DC continuous duty fail-unlocked with built-in microswitch.The strike is closed as long as the current is on and opensautomatically when the current is switched off.A microswitch monitors the latchbolt engagement.

Assa 5585 Solid Face plate 510

Solid 5114

Fitting example


Diode

Coil



All microswitches are of single-pole double-throw type. Theymay therefore be connected in either the normally-open ornormally-closed position. Maximum power rating for allmicroswitches are 2A at 24V DC.The electric strike shall be supplied with direct current voltage,maximum +/- 10% deviation from the nominal current.




Application

• Faceplate 505 is suitable for door frames made of metal• Faceplate 510 is suitable for door frames made of wood or

metal.• Faceplate 520 is suitable for door frames made of insulated

aluminium.

Dimensions


Solid 505, 510 & 520 – Face plates

Features

• Faceplate is manufactured from high grade steel.• Used in combination with Simple electric strikes• Used together with single or double latch bolt locks.



Solid 511, 512 & 521 – Face platesGeneral


Application


• Faceplate 512 is suitable for rebated door frames made ofwood.

• Faceplate 521 is suitable for door frames made of insulatedaluminium.


Dimensions



Features

• Faceplate is manufactured from high grade steel.• Used in combination with Simple electric strikes.• Used together with single or double latch bolt locks.


DEAD BOLT ELECTRIC STRIKES

Trioving HS 35Application

For use where the access control must work together with a highsecurity deadbolt. The rapid operation of an electric strike, ascompared to a motorlock, is recommended for high-traffic areassuch as corridor doors and main entrances.

FunctionHS35HO/VODC continuous duty fail-unlocked with two built-in microswitches.The strike is closed as long as the current is on and opensautomatically when the current is switched off.One microswitch monitors the latchbolt engagement, and the othermonitors the deadlocking of the pivoting staple, thus giving 100%assurance that the door is properly secured.

HS35HN/VNDC continuous duty fail-locked with two built-in microswitches.The strike opens when the current is on and locks automaticallywhen the current is switched off.One microswitch monitors the latchbolt engagement, and the othermonitors the deadlocking of the pivoting staple, thus giving 100%assurance that the door is properly secured.

Features


• Available in 12 and 24V DC versions.• High strength – resists up to 10,000 N (1000 kg) side pressure

on the pivoting staple.• Tested to 1,000,000 opening cycles.• Current consumption 950 mA for 12V DC versions or 650 mA

for 24V DC version.

Dimensions

Reinforcement accessories

HS 35/30, HS 35/40, HS 35/44.

Multifunctionpower

HS 35/30 HS 35/44 HS 35/40


SOLICODE 190 and 210Application

For use where access to particular areas is restricted to personsknowing the digital pass code - for example doors between publicand private areas in banks and shops, plant rooms, laboratoriesor other specially designed areas of restricted access.

Features

• Compact and easy to install.• The unit is programmed from the keypad.• Memory battery backup.• Requires entry of a 4-digit or 6-digit pass code in the correct

sequence.• Up to 1,000,000 codes available when using 6 digits.• Two codes may be stored at one time, 4-6 digits.• Suitable for internal and external use.• Automatic anti-manipulation function.• Anti-tailgating function when used with a monitored electric

strike.• May be connected to e remote switch or timer, making one

code valid particular times of the day only.• An auto-expiry code function is available.

SOLICODE 210 only

• Backlit keypad - backlighting can be turned off if not required.• Duress alarm function. Entering the duress code opens the

lock but also triggers a relay that may be used to activate aremote alarm.

• Flush mounted version available.

Technical data

• Power supply 12-24V AC/DC.• Current consumption min 10 mA, max 80 mA for SOLICODE

190.• Current consumption min 10 mA, max 100 mA for SOLICODE

210.• Output max 1A/24V.• Cast zink alloy with white or black powder coating as standard.• IP 54 rated housing.• Stainless steel push buttons.• Other finishes as brass and chrome (frosted/silver) are

available.

SOLICODE 190

SOLICODE 210

CODE LOCKS


SOLICARD 1100

Portable programmer 6312 HT

ApplicationFor use where access to particular areas is restricted to authorisedpersons - for example doors between public and private areas,plant rooms, laboritories or other specially designed areas ofrestricted access. Compatible with electric strikes, motor locksand other locking devices.Access may be controlled at various levels: by magnetic swipecard and digital PIN, card only, common code or door unlocked.

CARD LOCKS

Features

• Compact and easy to install.• The unit may be programmed from the keypad or using the

Portable Programmer 6312HT.• Block programming or deletion of multiple cards is possible.• Use standard hi-co magnetic swipe cards.• Up to 2000 cards may be used in the system.• Option of using digital PIN codes or common codes.• Anti-tailgating function when used with a monitored electric

strike.• Built-in clock and calendar, with up to 8 day types an 9

different access schedules.• Backlit keypad - backlightning can be turned off if not required.• Audit trail - event log can be printed.

Technical data

• 12-24V AC/DC, max current 80 mA.• Cast zinc alloy with white or black powder coating as standard.• IP 54 rated housing.• Stainless steel push buttons.• Other finishes as brass and chrome (frosted/silver) are

available.

ApplicationOptional programming unit, used as an easier alternative toprogramming via the keypad.

Features

• LCD panel for instant feedback.• May be connected to a printer for access to reports, including

an audit trail of the last 2000 events after selected start time.


Solenoid locks have a wide area of application and are suitable for doorswhere both reliability and security are major considerations. Solenoidlocks offers a remote-controlled daytime locking that can be combinedwith a high level of security through a mechanical dead-bolt.

The solenoid lock may be integrated with a complete access controlsystems or work as a stand alone unit together with for example codelocks.

Our solenoid locks are well known for high quality, security and durability.

FUNCTIONS

Fail lockedThis function means that the solenoid lock will be locked only as long asthe power is off. In case of a power failure, the lock will remain locked.The lock will open as soon as it receives power.

Fail unlockedThis function means that the solenoid lock will be locked only as long asthe power is on. In case of a power failure, the lock will open and will lockas soon as it receives power again. This function is typically used inemergency exit doors.


Night lockingA night lock is typically a motor lock rather than an electric strike or asolenoid lock. The motor lock has a much higher security level comparedto electric strikes and solenoid locks the dead bolt function. It may beremote controlled, thus providing an automatic night-time locking.

Solenoid locks


Assa 8030Application

Assa solenoid handle locks are particularly suitable for use in high-traffic areas where both reliability and security are majorconsiderations.

Features

• Assa Modular lock case dimensions• Extra sturdy construction for heavy duty use• Latch bolt operated by lever handle once a correct opening

signal has been received.• Key or thumb turn will also operate latch.• Latch is automatically deadlocked when the door is closed.• Available in 50 mm or 70 mm backset.• Fail locked and fail unlocked versions available.• Microswitch monitors deadlocking of latchbolt.• Recommended specification includes manual override using

cylinders, or emergency accessories.

Technical data12 or 24V DC.Current consumption 60 mA for 24V version, 130 mA for 12Vversion.

SOLENOID LOCKS

Cylinder Accessories:18256 - Set of outside cylinder ring, inside cylinder ring, cylinder ringscrews and cylinder screws.

ExteriorLever handleretracts latchafter an electricalguided signal.Key operateslatch.

InteriorLever handleretracts latchafter an electricalguided signal.Key or turnoperate latch.

Function

Operating requirementsSolenoid lock: temp. –20°C to +40°C.20-90% relative humidity, non-condensating.


SOLENOID LOCKS


Assa solenoid handle locks with split spindle function, areparticularly suitable for use in high-traffic areas where both reliabilityand security are major considerations and where the need forquick evacuation may be necessary.


Features

• Assa Modular lock case dimensions• Extra sturdy construction for heavy duty use• Exterior - Latch bolt operated by external lever handle once a

correct opening signal has been received.• Interior – Latch bolt mechanically operated by interior lever

handle at all times.• Key or thumb turn will also operate latch.• Latch is automatically deadlocked when the door is closed.• Available in 50 mm or 70 mm backset.• Fail locked and fail unlocked versions available.• Microswitch monitors deadlocking of latchbolt.• Recommended specification includes manual override using


Length of spindle For standard 43 mm 805073

handles

For thicker 53 mm 805074doors 63 mm 805077

SpindlesSpecial spindles, as shown below, must be used when leverhandles are fitted to Assa Split Follower Locks. Assa lever handlesare recommended. When using Assa emergency accessory 8563the fixed spindle must be cut to correct length.

Cylinder Accessories:2356 - Set of outside cylinder ring, inside blind rose, cylinder ringscrews and cylinder screws.

ExteriorLever handleretracts latchboltafter an electricalguided signal.Key retractslatchbolt.

InteriorLever handleretracts latchbolt.

Function



SOLENOID LOCKS


Assa solenoid handle locks are particularly suitable for use in high-traffic areas where both reliability and security are majorconsiderations. The 8020 incorporates manual deadlocking forincreased night time security.


Features

• Assa Modular lock case dimensions• Extra sturdy construction for heavy duty use• Exterior - Latch bolt operated by lever handle once a correct

opening signal has been received.• Interior – Latch bolt and deadbolt mechanically operated by

interior lever handle at all times.• Key or thumb turn will also operate latch.• Latch is automatically deadlocked when the door is closed.• Additional hardened steel deadbolt thrown 20 mm by 90º turn

of key or thumb turn.• Available in 50 mm or 70 mm backset.• Fail locked and fail unlocked versions available.• Microswitch monitors deadlocking of latchbolt.• Second microswitch monitor locked position of deadbolt.• Optional third micro switch monitor unlocked position of

deadbolt.• May be used with security striking plate.• Recommended specification includes manual override using



handles




ExteriorKey operatesdeadbolt andlatchbolt. Leverhandle retractslatchbolt after anelectrical guidedsignal.

InteriorKey operatesdeadbolt andlatchbolt. Leverhandle retractsboth deadboltand latchbolt.

Function



SOLENOID LOCKS

Assa 8025


Features

• Assa Modular lock case dimensions• Extra sturdy construction for heavy duty use• Latch bolt operated by lever handle once a correct opening

signal has been received.• Key or thumb turn will also operate latch.• Latch is automatically deadlocked when the door is closed.• Additional hardened steel deadbolt thrown 20 mm by 90º turn

of key or thumb turn.• Available in 50 mm or 70 mm backset.• Fail locked and fail unlocked versions available.• Microswitch monitors deadlocking of latchbolt.• Second microswitch to monitor locked position of deadbolt.• Optional third micro switch monitor unlocked position of



ApplicationAssa solenoid handle locks are particularly suitable for use in high-traffic areas where both reliability and security are majorconsiderations. The 8025 incorporates manual deadlocking forincreased night time security.




InteriorKey or turnoperatesdeadbolt andlatchbolt. Leverhandle retractsboth deadboltand latchbolt.

Function


SOLENOID LOCKS


Assa solenoid handle locks are particularly suitable for use in high-traffic areas where both reliability and security are majorconsiderations. The 8065 incorporates manual deadlocking forincreased night time security.


Features

• Assa Modular lock case dimensions• Extra sturdy construction for heavy duty use• Exterior - Latch bolt operated by lever handle once a correct

opening signal has been received.• Interior – Latch bolt mechanically operated by interior lever

handle at all times.• Key or thumb turn will also operate latch.• Latch is automatically deadlocked when the door is closed.• Additional hardened steel deadbolt thrown 20 mm by 90º turn

of key or thumb turn.• Available in 50 mm or 70 mm backset.• Fail locked and fail unlocked versions available.• Microswitch monitors deadlocking of latchbolt.• Second microswitch to monitor locked position of deadbolt.• Optional third micro switch monitor unlocked position of




handles





InteriorKey or turnoperatesdeadbolt andlatchbolt. Leverhandle retractslatchbolt at alltimes.

Function

Operating requirementsSolenoid lock: temp. –20°C to +40°C.Control unit DAC 30: +5° to +40°C.20-90% relative humidity, non-condensating.

31

Motor locks have a wide area of application and is the best solution fordoors where a high level of physical security is required. Motor locksoffers a remote-controlled locking solution and are particularly suitablefor automatic night-time locking and unattended entrance doors.

The motor lock may be integrated with a complete access control systemsor work as a stand alone unit together with for example code locks.

Our motor locks are well known for high quality, security and durability.

FUNCTIONS


Night lockingA night lock is typically a motor lock rather than an electric strike or asolenoid lock. The motor lock has a much higher security level comparedto electric strikes and solenoid locks the dead bolt function. It may beremote controlled, thus providing an automatic night-time locking.

Motor locks


MOTOR LOCKS

DAC-30 Control unitApplication

DAC-30 provides the intelligence of the motor lock system, andallows it to be integrated with a wide variety of other equipment. Itmay be used with a simple switch or linked to sophisticated accesscontrol, building management, and alarm systems.

Dimensions

Features

• The control unit is for use with any of the Assa Motor Locks.• Accepts inputs from any suitable switch, timer or host control

system.• 4 wiring system - 2 wires for power supply, 2 wires for

communication.• Encrypted communication between the DAC-30 and the Assa

Motor lock.• Offers unique possibilities to connect and read a day lock

function in combination with a night lock function.

Function

• Suitable for connection to voltage free contacts from a switchor control system. These provide either simple unlocking or anoverride function. With this, the lock remains unlocked afterthe first authorised opening signal, until the function is turnedoff.

• The position of the bolt and door is monitored, and alarms willactivate if the motor lock is prevented from opening properly.

• The bolt will automatically re-lock if the door is not openedwithin a specified time.

• If the bolt is blocked for any reason, the system will repeatedlyattempt to throw it again. This is done at 5-seconds interval toprevent the motor burning out.

Inputs: Relay outputs Daytime lock Alarm outputOpening Security lock Control output: 12V

Relay or VoltageDaytime lock Day lockBlocking Open

External door Door positionmonitoring switch

Technical data

• Power supply 12-24V AC/DC.• Power consumption 200 mA.• Temperature range +5° C to +40° C (not condesed).


MOTOR LOCKS

Assa 8000SApplication

For use on premises where a high level of physical security isrequired, operated from a remote location. Assa Motor locks areparticularly suitable for automatic night-time locking andunattended entrance doors. In doors with high opening frequencyan electric day lock should supplement a motor lock.

Features

• Assa Modular lock case dimensions.• Extra sturdy construction for heavy duty use.• Hardened steel deadbolt thrown 20 mm by motor or by 90º

turn of key or thumb turn.• Latch bolt reversible without opening the lock case.• Available in 50 mm or 70 mm backset.• Serial, encrypted communication between the control unit

DAC-30 and the lock.• Built-in magnetic contact monitors door position.• Control unit DAC-30 works as a combined motor lock control

unit and node, when combined with access control systemSolicard 4000 and Solicard 6300.

• Recommended specification includes manual override usingcylinders, or emergency accessories.

Technical data17 to 24V AC/DC. Alternately 12 V DC stabilised.Current consumption at 24 V, DC, at rest 350 mA, in operation400 mA, peak 800 mA (0.1 S). Relay load max. 1A.


ExteriorMotor operateddeadbolt.Deadbolt is alsooperated by key.Lever handleretracts latchbolt.

InteriorMotor operateddeadbolt.Deadbolt is alsooperated by key,thumbturn oremergencyaccessories.Lever handleretracts latchbolt.

Function

Operating requirementsMotor lock: temp. –40°C to +70°C.Control unit DAC-30: +5° to +40°C.20-90% relative humidity, non-condensating.

Assa’s motor lock are supplied in complete sets containing motor lock,strike Assa 1887 with built-in magnet, control unit DAC-30 and 6 mconnecting cable. Alternatively as a lock set only, without control unit.


MOTOR LOCKS




Features

• Assa Modular lock case dimensions.• Extra sturdy construction for heavy duty use.• Hardened steel deadbolt thrown 20 mm by motor or by 90º

turn of key or thumb turn.• Available in 50 mm or 70 mm backset.• Serial, encrypted communication between the control unit DAC

30 and the lock.• Built-in magnetic contact monitors door position.• Control unit DAC-30 works as a combined motor lock control


• Recommended specification includes manual override usingcylinders, or emergency accessories.

Opearating requirementsMotor lock: temp. –40°C to +70°C.Control unit DAC-30: +5° to +40°C.20-90% relative humidity, non-condensating.


ExteriorMotor operateddeadbolt.Deadbolt is alsooperated by key.

InteriorMotor operateddeadbolt.Deadbolt is alsooperated by key,thumbturn oremergencyaccessories.

Function

Assa’s motor lock are supplied in complete sets containing motor lock,strike Assa 1887 with built-in magnet, control unit DAC-30 and 6 mconnecting cable. Alternatively as a lock set only, without control unit.


MOTOR LOCKS

Assa Evolution 810SApplication



ExteriorMotor operatedhookbolt, is alsooperated by key.Lever handleretracts latchbolt.

InteriorMotor operateddeadbolt, is alsooperated by key,thumbturn oremergencyaccessories.Lever handleretracts latchbolt.

Function

Features

• Extra sturdy construction for heavy duty use.• Hardened steel swing-type deadbolt thrown 25 mm by motor

or by 90º turn of key or thumb turn. Provides maximumresistance to force.

• New, improved latch bolt design for smoother operation.• Available in 35 mm, 50 mm or 70 mm backset.• Serial, encrypted communication between the control unit DAC

30 and the lock.• Incorporates a built-in magnetic door contact which

corresponds to a magnet in the striking plate.• Control unit DAC-30 works as a combined motor lock control


• Locking by motor takes less than 0.5 seconds.• Recommended specification includes manual override using


Technical data17 to 24V AC/DC. Alternately 12 V DC stabilised.Current consumption at 24 V, DC, at rest 120 mA, in operation350 mA. Relay load max. 1A.


Assa’s motor lock are supplied in complete sets containing motor lock,strike Assa 1387-12 with built-in magnet, control unit DAC-30 and 6 mconnecting cable. Alternatively as a lock set only, without control unit.

The great advantage witha hook bolt is that the doorand frame are ”hooked”together and makes itdifficult to break in.


MOTOR LOCKS

Assa Evolution 811SApplication


Technical data17 to 24V AC/DC. Alternately 12 V DC stabilised.Current consumption at 24 V, DC, at rest 120 mA, in operation350 mA. Relay load max. 1A.

Features

• Extra sturdy construction for heavy duty use.• Hardened steel swing-type deadbolt thrown 25 mm by motor


• Available in 50 mm or 70 mm backset.• Serial, encrypted communication between the control unit DAC

30 and the lock.• Incorporates a built-in magnetic door contact which






ExteriorMotor operatedhookbolt, is alsooperated by key.

InteriorMotor operateddeadbolt, is alsooperated by key,thumbturn oremergencyaccessories.

Function


Assa’s motor lock are supplied in complete sets containing motor lock,strike Assa 1387-12 with built-in magnet, control unit DAC-30 and 6 mconnecting cable. Alternatively as a lock set only, without control unit.

The great advantage with ahook bolt is that the doorand frame are ”hooked”together and makes itdifficult to break in.


MOTOR LOCKS



Features

• Extra sturdy construction for heavy duty use.• Hardened steel swing-type deadbolt thrown 22,5 mm by motor


• Available in 28 mm backset.• Serial, encrypted communication between the control unit

DAC-30 and the lock.• Incorporates a built-in magnetic door contact which






ExteriorMotor operatedhookbolt, is alsooperated by key.

InteriorMotor operateddeadbolt, is alsooperated by key,thumbturn oremergencyaccessories.

Function

Assa’s motor lock are supplied in complete sets containing motor lock,strike with built-in magnet, control unit DAC-30 and 6 m connectingcable. Alternatively as a lock set only, without control unit.




Magnets and accessories

MagnetsDoor magnets may be used in doors where safety and quick exit are ofimportance and should be combined with a certain degree of security.Door magnets are typically a good alternative to an electric strike. Doormagnets are also a good choice for doors that are situated in a toughenvironment.One advantage with a door magnet compared to another locking solutionis that it has no movable mechanical parts that can cause mechanicalmalfunction. At the same time, the strong magnetic force is effective inholding the door locked.

Typically, the door magnet should be connected to a fire alarm and/or aseparate emergency opening button.

Cupboard locksThe cupboard lock is a small and compact electrical lock used inapplications such as drawers, cabinets and window displays.

It is available in 4 different models with or without microswitch and alsowith impulse function. Functions also include fail locked and fail unlocked.


ELECTRIC CUPBOARD LOCKS

Solid 1048, 1048BS, 1049 and 1049BS

Features• Holding power 100 kg• Are available with bolt contact (BS) max. 1A switch output• Fail locked means that lock is locked in no-power position.Fail unlocked means that lock is locked when there is power.

FunctionSolid electric cupboard locks have been developed for lockingfixtures and fittings , e.g. drawers, filing cabinets and windowdisplays, as well as letter boxes.

The lock may be controlled by a push-button, time switch, codelock or more advanced access systems.

Solid 1048, 1048BS are electric cupboard locks with an impulsedesign.

Dimensions

Solid 1049Easily adjustable betweenfail locked and failunlocked.

Technical specification

Designation Latch bolt contact Voltage Current consumption Holding power Temperature range1049 – 12-24 VDC 12 VDC 280mA 100 kg +10°C – +40°C

24 VDC 140mA1049BS × 12-24 VDC 12 VDC 280mA 100 kg +10°C – +40°C

24 VDC 140mA1048 – 12-24 VAC/VDC 12 VDC 900mA 100 kg -10°C – +60°C

12 VDC 500mA24 VDC 450mA24 VDC 230mA

1048BS × 12-24 VAC/VDC 12 VDC 900mA 100 kg -10°C – +60°C12 VDC 500mA24 VDC 450mA24 VDC 230mA


DOOR HOLDER MAGNETS

Solid magnum 827SD,push-door set

Magnum door magnets Solid 827

FunctionSolid 827 magnum door-holder magnet is primarily designed forkeeping light push-doors closed.

Suitable places can be doors for X-ray departments at hospitalsor the locking of light push-partitions in meeting rooms.

The door-holder magnet’s anchor has spring-loaded ejector boltsin order to overcome any residual magnetism.

Push-door set


Model Holding power in kilo Current consumption 12VDC / 24 VDC Length in mm Depth in mm Height in mmSolid 827 250 530 mA / 250 mA 300 28 35


Solid magnum 828with anchor.

DOOR HOLDER MAGNETS

FunctionMagnum door-holder magnets are primarily designed to keepdoors shut in emergency exit routes.

Suitable places can be emergency exit doors in factories, sportshalls, department stores, high frequency use doors and doorswhere other electrical locking is not possible.

The magnets are protected against sabotage, such as lacquer,paint sprays or impact marks on the contact surfaces. If themagnet is not pulling with its full power, this is shown by adiode on the front.

The magnets have no mechanical parts that form obstacles.With their efficient magnetic force they keep the doors “locked”,but are still easily and safely able to be opened in the event ofevacuation (breaking the current circuit).

If the magnets are further connected to a fire alarm andindividual emergency opening buttons, a high emergencyevacuation safety level is achieved.

FeaturesIndication – the magnet indicates by means of a red and greenlight diode when the door is locked/unlocked. The indication isalso given by means of a freely alternating relay for external needs(e.g. manoeuvre panel, gate connections etc.)Anti-residual magnetism – the magnets have built-in electronicsthat eliminate residual magnetism in the event of a loss of power.


Modell Holding power in kg Current consumption 12VDC / 24 VDC Length in mm Depth in mm Height in mmSolid 828 > 500 500 mA / 250 mA 281 37 68

Magnum door magnets Solid 828

Accessories

828-6Assembly kit for fittingon the door’shinge side.

828-5Fixing plate for securefitting of anchor

828-4Angle consolefor magnet


ACCESSORIES

Door loop Assa 8810 and 8811 - ConcealedFunction

Door loops 8810 and 8811 are designed for transition of theelectrical leads from the door to the frame section.For maximum bend safety a lead is employed with the highestpossible number of wires, maximum cable thickness 7.4 mm. Assa8811 is used if the door’s opening angle is greater than 120° or ifthe lateral displacement on spring is greater than 40 mm.Door loops are installed in the upper part of the door’s hinge side.Drilling for the protective plate is made in the door. Pulling thelead through is done before the protective plate and the springare fitted. The drilling should be made big enough for the leads tobe able to move about a bit.

Dimensions

Assa 8811

Assa 8810

Door loop Solid 83 - Surface mounted

FunctionSolid 83Is a 400 mm flexible metalltube with fittings in white plastic. Maxcable dimension 6 mm round cable.

Solid 83/600Same as above but in 600 mm length.


ACCESSORIES

Printer cable To connect a printer to the6310 MP Programmingpanel or 6312HT Portableprogrammer.

SOLICODESOLICARD

6012SK

TKN-01TKN-02

Exit switch with backbox.Flush mounted exit switch.

Electric StrikesSOLICODESOLICARD

Exit button

1020PP For use with 6312HT SOLICARD 1100Programming point

Product

Buzzer SUM-12 Used when stronger signal isrequired then the standardbuzzer in the card reader.6-15V.

SOLICODESOLICARD

Reference Description For use with

PSS-60 A (two pole) transformer; theprimary side uses 220-240VAC and the secondary sidesupplies 24V AC/2,5A,60VA. Fused on both sides.

Electric StrikesSOLICODESOLICARD

Power supply unit

Card holders plastic clip,metal clip,without clip,Yo Yo.

SOLICARDCard holders

M84

8.02

04.3

000

Assa AB is an ASSA ABLOY Group company. Assa AB develops, manufactures and markets locking and security systems fordoors and windows. The products are well designed, of good quality and provide high security.

The ASSA ABLOY Group is the world´s leading manufacturer and supplier of locking solutions, dedicated to satisfying end-userneeds for security, safety and convenience.

Sweden: Assa AB, P.O. Box 371, 631 05 Eskilstuna - Phone +46 16 17 70 00, Telefax +46 16 17 72 10 - www.assa.se

An ASSA ABLOY Group company

Assa Electromechanical Locks - Palmett · 8 An ASSA ABLOY Group company Solid 816, 823, 824 –...

Documents

Transcript of Assa Electromechanical Locks - Palmett · 8 An ASSA ABLOY Group company Solid 816, 823, 824 –...