ASRS COMPUTER SOFTWARE SYSTEM USER MANUAL_0906.pdf

ASRS COMPUTER SOFTWARE SYSTEM USER MANUAL

Wise automation engineering(Zhejiang) co.,ltd Address:No8 wuyi road economic development zone.Jiashan Zhejiang P.R.C Tel:0573-84185800 Fax:0573-84185809 Http://www.wise56.com E-mailwise @public.js.jxptt.zj.cn

1

FINISHED GOODS AS/RS COMPUTER SOFTWARE SYSTEM

USER MANUAL

WISE AUTOMATION ENGINEERING(ZHE JIANG)CO.,LTD.

2012-09

PDF "pdfFactory Pro" www.fineprint.com.cn



2

Catalog CHAPTER 1 AS/RS SYSTEM GENERAL SITUATION .................................................................................... 3

1.1 AS/RS LAYOUT.......................................................................................................................................... 3 1.2 HARDWARE SYSTEM CONTROL STRUCTURE................................................................................... 4 1.3 ERP-ASRS-DEVICE INTERFACE............................................................................................................. 4 1.4 ERP-ASRS SYSTEM FLOW CHART ........................................................................................................ 5 1.5 AS/RS COMPUTER SYSTEM SPECIFICATION LIST ............................................................................ 6

CHAPTER 2 AS/RS DP SYSTEM GENERAL OPERATION............................................................................. 7 2.1 AS/RS OPERATION ENVIRONMENT ..................................................................................................... 7 2.2 AS/RS DP SYSTEM MODE OF ENTRY................................................................................................... 7 2.3 ELEMENTARY OPERATION MODE....................................................................................................... 8

CHAPTER 3 AS/RS DP SYSTEM FUNCTION MODULE.................................................................................. 15 3.1 BASIC CODE ........................................................................................................................................... 15 3.2 DAILY AS/RS OPERATION .................................................................................................................... 31 3.3 ASRS STOCK ........................................................................................................................................... 37 3.4 WAIT FOR ASRS PROCESS DATA ........................................................................................................ 43 3.5 WORK FILE ............................................................................................................................................. 49 3.6 REPORT && ANALYSIS......................................................................................................................... 57 3.7 SECURITY MANAGEMENT.................................................................................................................. 70

CHAPTER 4 AS/RS ONLINE CONTROL SYSTEM............................................................................................ 78 CHAPTER 5 AS/RS UPDATE SYSTEM................................................................................................................ 83 CHAPTER 6 AS/RS SYSTEM EXCEPTION AND HANDLING ........................................................................ 88

6.1 PLC CONTROL DEVICES RUNNING EXCEPTION AND HANDING SOLUTION.......................... 88




3

CHAPTER 1 AS/RS SYSTEM GENERAL SITUATION 1.1 AS/RS LAYOUT




4

1.2 HARDWARE SYSTEM CONTROL STRUCTURE

1.3 ERP-ASRS-DEVICE INTERFACE




5

1.4 ERP-ASRS SYSTEM FLOW CHART




6

1.5 AS/RS COMPUTER SYSTEM SPECIFICATION LIST

ITEM NAME DESCRIPTION QTY REMARK

1 DB SERVER DELL T420 1 DATABASE SERVER

2 SERVER OS SBS2011 1

3 ON-LINE Dell 790MT 1

4 DP Dell 790MT 2

5 UPS 3KVA 1 SERVER

6 PRINTER HP 1 REPORT PRINT

7 MOXA CP-118U 1 8 PORT

8 SWITCH HUB D-LINK 1

9 WINDOWS 7 MICROSOFT 3




7

CHAPTER 2 AS/RS DP SYSTEM GENERAL OPERATION 2.1 AS/RS OPERATION ENVIRONMENT

network operating system: Windows SERVER 2003 workstationWindows XP database systemMS SQL Server 2000 proscenia development toolSYBASE Power Builder 9.0,Borland DELPHI 7.0

2.2 AS/RS DP SYSTEM MODE OF ENTRY double-clicks on the workstation tabletop the related icon then to enter the corresponding system. 1 The DP system enters the main picture

After the system starts, appears the following graphical interface (picture 1)

picture 1

After several seconds,will appears login user registpicture 2

picture 2

The input system manager assigns to register the code, the password, if is not right, then message please input

again!, if exit,then click exit button,if the password are correct, then enters the system MDI host window (picture 3), then carries on each information handling of traffic.




8

picture 3

2.3 ELEMENTARY OPERATION MODE Application procedure is similar with other Windows the XP, this system function mainly by the menu, the tool

strip, the window, the report form realizes. Among them, the majority of procedure is WISE to develop, Has certain demonstration style, the function formidable base class window and the report form, then defers to the user demand to carry on the design directly

1. menu The menu is the entrance for the operator uses the system, the user may carry on the system operation through the operation menu, the operation menu has two ways:

(1) Uses the keyboard to operate May use on the keyboard the ALT key to activate the menu, then choose the menu with the cursor key, execute the menu item with the enter key.

(2) Uses the mouse to operate The user use mouse control menu quite is convenient, first selects some menu item is ok

2. Tree menu

Can the more convenient choice menu item, only have to open out the menu item, then may click on the selection. The concrete function is consistent with the menu.

3. window (1) window basic control picture 7




9

window yes computer be like user proceed interlocutory mostly interfaceuser mostly through the medium of window proceed data-in, output function. window be formed of some controlsaw chart fourthereof operate and general win95 / win98 cum office subaltern operate

(2) window working order The window state, may divide into the original state, the query state, the modi state, the additional state.

(3) window style The window operation has four kind of styles, respectively is the execution, the input, the printing.

When system run may open many windows, the identical time only can in the current window operation, be only effective to the tool strip to the current window

execute window This kind of window does not have the tool strip, cannot execute processing to the data material. But may

execute some fixed function in the backstage. As picture

Sheet no query

Good editor

Next pulls the type tabulation

Single

Reelection frame

Text input frame

Command button




10

(picture 8)

GRID style One kind is the grid type,show manay item records, another kind is the free form, only show a record. Like

Figure 9. Generally uses in the field few basic code data processing, like chart

(picture 9)

4. toolbar

The tool strip is the operation one kind of tool, is a menu another kind of expression. Is WISE Corporation has custom-made the design specially, mainly is aims at the above style the data window.The data window plate, query, printing functions and so on increases, deletes, the revision,




11

saves all all may complete through the tool strip. both toolbar each puxh button definition and operate direction for use as follows:

First article button (Alt+T)Under the inquiry condition uses, show the first record

Preceding button (Alt+P)Under the inquiry condition uses, show the before record

Next button (Alt+N)Under the inquiry condition uses, show the next record

Last button (Alt+B)Under the inquiry condition uses, show the last record

new sheet_no button (F5)Increases a new sheet no and enters the edition condition

Revision button(F6)To the current record revision, and enters the edition condition

insert record button (Alt+I)Inserts a detailed data

Deletes record button (Alt+D)Under edition condition available,Deletion data

copy button(Alt+C)Under edition condition available, May duplicate the data material

Glue button (Alt+V)Under edition condition available, The information duplicates which the buffer in inserts

to the current cursor is an expert to good expert

save button(F9) do with data modification operate save solstice database middlecombine redound

query state

Cancels the revision button(Alt+U) do with data modification wait operate Cancelget make

amendment of prevenient data mode breath

Filtration button(F7)Filtration data material. The inquiry condition input divides into the precise inquiry and

the condition inquires two kinds, each kind of data type concrete operation as follows: Character inquiry: Direct input character, if in the field has the field of DDW (DropDownDataWindows)

or DDL (DropDownList) to be possible directly to choose, or direct input. For example: Directly inputs 205081007SPK01E in field, the system can be the 205081007SPK01E work files information filters Travel Card. At the same time, when this field editor form is dropdowndatawindows (ddw) or DropDownList (ddl), may directly from selection correct option , like product name field in the product code window; When the field editor form is checkbox (or radiobutton) was elected, may filter all materials of this field value is ' Y ', if filter by condition is ' Y ', after then must select, then cancels, after clicks filters, filtered the material is all materials of checkbox (or radiobutton) the value is ' Y ', otherwise, the system will be able to possess all material to filter.

Date inquiry: Directly inputs the date in the date field which must inquire, if in IoTime field inputs 2005-10-02, the system can possess Io Time to be equal to 2005-10-02 work files material filters;

Value inquiry: The direct input value, system can filter conform to the input condition that material, if inputs 1000 in the Qty field, system can possess product Qty to be equal to 1,000 product information;

Besides the above equivalent inquiry, system also provides some operator inquiries




12

All data type, may adopt the operation expression, like(> = =2005-10-02 in IoTime field, system can possess Io Time to be bigger than was equal to 2,005/10,/02 work files material; If inputs =1000 in the Qty field, the system can possess the product Qty to be bigger than was equal to 1,000 products information

Moreover, also provides three kind of inquiries matches symbol to the character: A. Behind Character add-on ' % ', expressed the material which all tallies which inputs the character

begins. If in the product code window, inputs B% in the type code field,when clicks the filters button, system can possess the product type is the product correlation information which B begins filters;

B. Behind character add-on ' ^ ' ,expression all conforms to the character ending material which inputs. If inputs A^ in the product type code field, when clicks the filters button, system can possess the product type is the A ending product correlation information filters;

C. Behind Character add-on ' & ', expressed all contains the input the character material, if inputs B& in the product type code field, when clicks the filters button, system can possess the product type code to contain has B the product correlation information to filter

Moreover, system also provides to the information personnel through the SQL sentence direct inquiry function, does not recommend the commonly personnel to use.r

Renovates the record button(F8) data among renovate database.

Revolution button(F2) data among renovate database

print button(F4)print document

Data window recording sorting buttonMay click on this button, opens the sorting window, tows according to

the actual situation the source data field to the row in, and chooses whether rises the foreword, if is the descending sequence arrangement, will rise the foreword hook to cancel, again will select OK then

Calculator:May click on this button to open the calculator window

help button (F1)show the systemic aid prompting message to bare

About tool button (Ctrl+Alt+A)show these systemic copyright information bare

exit button(Alt+Q)Exit from the current active window. Under the edition condition, requests to save the plate

or the giving up withdraws again. 5. report print accounting print possess unify interfacevide infra chartpicture 10 into among these system




13

(picture 10)

The input inquiry condition, the click filtration button, will show the query data, like (picture 12). After the click printing button, can appear the printing establishment window. According to the prompt establishment printer, the click starts the button, then outputs the printer

(picture 11)




14

picture 12

Preview form. When the rod is selected, may adjust all around page distance. When is

selected crosswise, establishment printing direction for crosswise, otherwise is the longitudinal printing.

The establishment printing and looks at the reproduce by pantograph in advance, when will click < reduces picture which printing and will look at in advance, when will click > enlarges the picture which the printing and will look at in advance.




15

CHAPTER 3 AS/RS DP SYSTEM FUNCTION MODULE

3.1 BASIC CODE Program Codew_bas_sht_pfix Program DescriptionBill Prefix Setup FunctionQuerymodify Parent Classw_sysbase4 Datebase Tablebas_sht_pfixsys_form_detlsys_form_group Use DepartmentWISE,IT Use opportunitywhen setup and query to use by Bill Prefix User Interface

Purpose Setup or query by Bill Prefix Field

All Column not input ,except Program NamePrefix Operation Declaration u Column description 1. Program NameMust be inputThe input needs to establish the Bill prefix the Program NoWhen showNot

Found This Form No !The expression input Program No does not exist in sys_form_detl, must input again 2. PrefixCan input, inputs the form prefix which this Program must setup Remark If the Program is newlymust executeSecurity System ->Program Initiationotherwisethis Program No Can not find in the sys_form_detl of window




16

Program Codew_bas_sht_mast Program DescriptionCurrent Bill No Query Functionquery Parent Classw_sysbase4 Datebase Tablebas_sht_mastsys_form_detlsys_form_groupbas_sht_pfix Use DepartmentWISE,IT Use opportunityInquires some Bill prefix, month, current month of greatest numbers User Interface

Purpose Produces when the new odd number(Bill prefix + odd numbers) uses Field

All may not input. Remark

In unusual situationWhen preserves the new form datashow double key by errorCan inquire the corresponding month of current greatest odd numbers in this Programfor example AMS08/05,9Please the IT personnel to inquire the corresponding form current month of greatest odd numbers, (for example AMS08/05,8)Needs to ask the IT personnel to pass the related purviewupdate this Program the corresponding month of current greatest odd numbersfor example AMS08/05,9to 8




17

Program Codew_asr_bas_moxp Program DescriptionMOXA Port Setup FunctionQuerymodify Parent Classw_sysbase4 Datebase Tableasr_bas_moxp Use DepartmentIT Use opportunityWhen Setup serial port communication equipment corresponding port uses User Interface

Purpose ASRSs ONLINE The program can henceforth show withdraws the serial port communication equipment

corresponding port code number Field

MOXCrn1 PortPlca Port may inputOther field has not used Operation Declaration u Field explanation

1. MOXInput 1 2. Crn1 PortPlca PortNeeds to match with the computers COM hypothesis Remark

Does not allow to insert,delete,only can keep has a note When discovers some serial port damageThe Computer serial portmox cardpci cardThe

corresponding equipment wiring may exchange on other serial portMust in this Program modify corresponding serial port number, otherwise the online procedure is unable the normal work




18

Program Codew_asr_bas_wrk_status Program DescriptionWork No Status Code Setup FunctionQuery Parent Classw_sysbase4 Datebase Tableasr_bas_wrk_status Use DepartmentIT And correlation user partments Use opportunityInquiry system definition Work file in/out work execut status User Interface

Purpose ASRS ONLINEThe UPDATE System is defers to WORKFILE ID By work status the equipment

actuation and the data processing Field

All Column not input ,except Status CodeWork ID Status Description Remark

The table data only supplies the inquiry 15 in Work file status value 1115 Out work file status value;13 is the expression appears empties the storehouseThe system

automatically turns the work file corresponding id data active status value 13




19

Program Codew_asr_bas_wrk_iotype Program DescriptionWork No IO Type Code Setup FunctionQuery Parent Classw_sysbase4 Datebase Tableasr_bas_wrk_iotype Use DepartmentIT And correlation user partments Use opportunityInquiry system establishment Work file leaves the warehousing work type code number User Interface

Purpose ASRSs ONLINE systemThe UPDATE system is can defer to WORKFILE ID the work type value, Update locations status by Value Field

All Column not input ,except IO type codePriortywork id type description Remark

The table data only supplies the inquiry 13,1057 setup Warehousing io type by the system 6 setup Draws back the storehouse io type by the system. 101111 setup Leaves the storehouse Io type by the system 200 setup adjust stock io type by the system




20

Program Codew_asr_bas_loc_type Program DescriptionLocation Status Code Setup Functionquereymodify Parent Classw_sysbase4 Datebase Tableasr_bas_loc_type Use DepartmentIT And correlation user partments Use opportunityWhen query system location status uses User Interface

Purpose Setup an query for stock status Field

All Column not input ,except type codeLocation type description Remark

The table data only supplies the inquiry, Needs to learn by heart




21

Program Codew_asr_bas_crnp Program DescriptionCrane data Setup And Status Query Functionquerymodify Parent Classw_sysbase4 Datebase Tableasr_bas_crnp Use DepartmentIT And correlation user partments Use opportunitywhen query or setup crane work status to uses User Interface

Purpose Crane status by ASRS ONLINE systemupdate for crane work status Field

All Column not input ,except Crane nostatus Remark

The table data only supplies the inquiry Basic File SetupCrane data Setup And Status Query can query crane current working status for DP system




22

Program Code w_asr_bas_devp Program DescriptionStation Data Setup And Status Query Functionquerymodify Parent Classw_sysbase4 Datebase Tableasr_bas_devp Use DepartmentIT And correlation user Department Use opportunitysetup or query can in,can out or current working status for device uses User Interface

Purpose

When needs to stop or to start may can in and can out for device uses, the device stand running status update by the ONLINE system

Field explanation 1. IN EN: pitch on express enable for in Otherwise, express not enable 2. OUT EN: pitch on express enable for out Otherwise, express not enable 3. Drum_typeon the current station for Drum type 4. id noauto,load,can in,can outexpresstion the current station status,Provides it by the plc system

Update for ONLINE system Remark

1. does not new,delete,modify for devices data,otherwise , the system is unable the normal work 2. When the device appears abnormityor when need to in/out of urgencycan stop in en/out en

But dont forget to renew after The operation completesotherwisethe device will be stop status all alongdo not execute in/out for work

3. when device or crane do not normal to work, May through this Program inquiry standtion StatusJudges whether is the device is hardware or software breakdownCertainly also may directly inquires the information in online or on the plc man-machine

About Everyman, does not new,delete,modify for device no.




23

Program Codew_asr_bas_crn_status Program DescriptionOnline system crane Status Code Setup Functionquerymodify Parent Classw_sysbase4 Datebase Tableasr_bas_crn_status Use DepartmentIT And correlation user Department Use opportunityquery crane status for ASRS Online system User Interface

Purpose In application by ASRS ONLINE systemthe crane will return status code Field All Column not input ,except Status CodeCrane status Desciption Remark

The table data only the inquiryBasic File SetupCrane data Setup And Status Query can query the crane error code (if the crane in application to error) for DP system




24

Program Codew_bas_plc_error_type Program DescriptionDevice Error type Code Setup Functionquerymodify Parent Classw_sysbase4 Datebase Tablebas_plc_error_type Use DepartmentIT And correlation user Department Use opportunityWhen inquiry system setup plc control error type code uses User Interface

Purpose In application by ASRS ONLINE systemIf the plc control device is wrongwill be return error code Field All Column not input, except Plc error type Codeerror type Desciption Remark

The table data only the inquiry




25

Program Codew_bas_plc_error Program DescriptionDevice Error Code Setup Functionquerymodify Parent Classw_sysbase4 Datebase Tableasr_bas_plc_error Use DepartmentIT And correlation user Department Use opportunityWhen inquiry system setup plc control detailed error code uses User Interface

Purpose

ASRS ONLINE in system runningIf the plc control conveyor running is wrong, will return to this detailed wrong code Field

All Column not input, except Error Codedevice error DesciptionStationError Type Remark

About Everyman, does not new,delete,modify for mk




26

Program Codew_asr_bas_crn_error Program DescriptionCrane Error Code Setup Functionquerymodify Parent Classw_sysbase4 Datebase Tableasr_bas_crn_error Use DepartmentIT And correlation user Department Use opportunityQuery for crane error code setup by system User Interface

Purpose ASRS ONLINE in system runningIf the crane running newspaper is wrong, will return to this Crane error code Field All Column not input, except Crane ErrorError Desciption Remark

About Everyman, does not new,delete,modify for mk




27

Program Codew_asr_stk_init Program DescriptionLocation Initialization FunctionProcess Parent Classw_sysbase0 Datebase Tableasr_stk_mast Use DepartmentWSIE Use opportunityWhen system initiation, carries on when the initialization to the ASRS location uses User Interface

Purpose Produces the corresponding recording in asr_stk_mast and entrusts with loc_no, row, bay, col Field

The bay, the row, the level may input Operation Declaration u Field explanation

1. rowMust be bigger than 1 to be smaller than 4 2. bayMust be bigger than 1 to be smaller than 44 3. levelMust be bigger than 1 to be smaller than 11 If surpasses the above scope, the system can prompt the correlation wrong prompt information

u Button explanation 1 InitializtionChick this Button 1If works normally, produces the corresponding recording in asr_stk_mast and entrusts with loc_no, row, bay, col. Location number Location is: 2 Rows+3 Bay numbers

+2 levels numbers, the location condition is O (empty storehouse). In executing state in button underneath as worthy of looking at as storehouse standard initialization progress, after the initialization completes demonstrates "UPDATE COMPLETE!" 2If appears the abnormal phenomenon below, please refer to prompts and makes processing n PromptROW,BAY Or LEV can't empty!The expression has not input the bay or the row, the

level value n Prompt Record already Exist,Can't initialize!The expression has had and the input line, the row,

the level same record n Prompt UPDATE ERROR!The expression initialization information inserts to the stock material

shows in asr_stk_mast to be defeated Remark

This procedure only can when the system initialization carries on by WISE




28

Program Codew_asr_wrk_lastno Program DescriptionLast Work No Query FunctionQuery Parent Classw_sysbase4 Datebase Tableasr_wrk_lastno Use DepartmentIT department and correlation use department Use opportunityInquires when the worfile ID production scope and the current id number uses User Interface

Purpose DP, the update system produces when workfile ID uses

Field explanation 1. Work Id Type: Fixed is 0, do not have to revise 2. Start NoEnd no: Entire workfile ID beginning and end value, after id arrives 9000, can recirculate by

1 starts 3. Current Work NoCurrent system production biggest ID, next ID is this ID + 1

Remark 1. Cannot increase, delete this table equipment the recording and the name, otherwise possibly can

cause the system to be unable the normal work Regarding the common user, does not permit the creation, deletes,modify mk




29

Program Codew_asr_row_lastno Program DescriptionLast Location Assign Row No Query FunctionQuery Parent Classw_sysbase4 Datebase Tableasr_row_lastno Use DepartmentIT department and correlation use department Use opportunityInquires when location row assignment principle and condition which ASRS goes into storage

uses User Interface

Purpose In ASRS DP, the Update system, goes into storage location row when the determination assigns the principle

and the current condition Field explanation

1. Wrk Mk:Fixed is 1, do not have to revise 2. Whstype:ASR TypeFixed is 0, do not have to revise 3. Crane QtyCrane Quantity 4. Start Row,End Row: Corresponds the asrs system the steel frame beginning and end number 5. Current RowPrevious location of storage correspondence row,when production location, can act

according to the crane circulation,simultaneously the steel frame also circulates (location is O) Remark

1. Cannot increase, delete this table the recording and the name,otherwise possibly can cause the system to be unable the normal work

Regarding the common user, does not permit the creation, deletes,modify mkwhs_type




30

Program Codew_dev_status_query Program DescriptionDevice Run Status Query Functionquery Parent Classw_sysbase4 Datebase Tableasr_run_stats Use DepartmentIT And correlation user Department Use opportunityInquires the Update system and the Online system running uses User Interface

Purpose In application by ASRS systemReal-time returns to the Update system and the Online system running condition Field All Column not input Remark

The table data only the inquiry




31

3.2 DAILY AS/RS OPERATION Program Codew_asr_pdc_store Program Description Finished Goods Storage in ASRS Entry

FunctionProcessing Parent ClassW_Sysbase4

Datebase Tableasr_wat_mast asr_wat_detl

Use DepartmentStorage management department

Correlative ProgramWait For asrs process data Query and Maintenance,Asrs Stock Query

Use opportunityWhen 2nd station warehousing.

User Interface

Purpose

Treats the warehousing material according to the ERP input, the update system can change over

to asrs treats the processing files, inputs this warehousing the sheet numbers, automatically

waits in the processing files from asrs to gain the warehousing material, the production

warehousing work files, makes an appointment

the corresponding storehouse position.

Operation Declaration

u Material extraction i. In the windowThe input correspondence treats goes into storage the material to go

into storage the sheet numbers, then through right side

ii. Retrieve the Data button, then withdraws the material information. iii. Through clicks on most right side the inquiry buttonshow a warehousing material

choice window, renovates possesses in asrs treats in the processing files the

warehousing material, the material which the choice corresponding must go into storage,

Then withdraws the material according to the confirm button. Like chart




32

u Field explanation

1. Pallet Sheet Nothe sheet of storageallow modify 2. From Station No: The stations of storage .can not modify. 3. Exit reason: when cancellation of storageCancellation reason input. 4. Other fence location values from wait in the processing files to withdraw

can not modify

u Retrieve Data Button explanation When the manual input correspondence storage sheetclick this button

Renovates detailed material which the correspondence storage

u Button explanation

When more then one storage material information in waiting process file, which storage

material information you want to storage, click this button, then show a window about all

of the waiting storage material information, Carry on the selectivity to storage u Startup Button explanation 1If works normallyplease Below refer to the information

Production warehousing work files material informationAfter the success demonstrated works

ID and the storehouse location numberThe active status is 1storageLeaves/enters the

type is 1work of storageThe source stand is 2, Man Banfou is Y, retrival the rank is

10.

Refresh stock conditionRenews in the corresponding stock material files the stock condition

is Sstoraging

2 If appears the abnormal phenomenon, please Below refer to the information

The material information is error

n Prompt The Pallet sheet no does not exist or already transfer into the work file!In expression The Pallet sheet no does not exist in waiting process file .

Processing planChooses other storage material information.

n Prompt The same station can not generate two works no in the same time!Indicated goes into storage in the work files to have the source stand to go into storage the




33

station number for this and the active status is 1 .

Processing planOnline work in processing or The work files material information has

exceptionallyuser should do it by Actual situation.

The storage stand to be possible to use or to have the thing or is automatic exceptionally

n Prompt The station can not be in!Expressed the storage stand can not be used. Processing planthis storage stand of storage state mast be possible to use

n Prompt No object on the station!Expressed storage station not having any thing Processing planThis storage station must have the thing condition to be possible

to use.

n Prompt The station is not auto!Expressed storage station is not auto. Processing planThis storage the automatic condition which stands for is when may

use

To have the storehouse location, the stand, the production work files

material unusual information.

n Prompt Have No Approprate Location!Expressed the goal stand is durable or automatically is not ; The goal storehouse position for is durable or has made an appointment, cannot produce the storehouse location.

Processing planExpressed the storage stand and the goal station goes into storage may use or not, to be automatic or not, the inspection goal storehouse position whether for is durable or has made an appointment.

n Prompt Insert into [asr_wrk_masp] Error!Expressed the work shopkeeper files material information to makes a mistake .

Processing planExamination work shopkeeper files material information

n Prompt Insert into [asr_wrk_detp] Error!Expressed the work files detailed files material information to makes a mistake .

Processing planExamination work files detailed files material information

n Prompt Update [asr_wat_mast] is error!The expression renewal notice goes into storage the files material to make a mistake. Processing planThrough examined Wait Store Maintenance, obtains goes into storage

the files material whether produces goes into storage the work files symbol. n Prompt Update[asr_stk_mast] Location Status Fail!When expression renewal stock

material storehouse position condition makes a mistake. Processing planThrough inquires Auto Warehouse Stock Query, and then know storehouse

position condition information.

u Exit button Explanation When needs to carry on to some material the cancellation goes into storage processing, in Exit Reson the cancellation of entry reason, clicks on this button, carries on cancellation which goes into storage.

Remark

1. When the Online system and the electrically controlled equipment are normal, after the start, the thing feed box will walk on the conveyor, the work files condition value will become

2.

2. This system has the function which the design automatic cancellation goes into storage, therefore, in has not clicked goes into storage in the situation which the button

determined, when the material not correct or decided this thing feed box does not go into




34

storage, reads in the withdrawal reason field draws back the storehouse reason, clicks withdraws from the button, then cancels this material to go into storage, if has clicked goes into storage determines the button, this withdrawal button is invalid.

3. If appears first entering, please according to below step processing: When the crane newspaper wrong returns to HP, cuts the manual way, lays aside this thing feed box

the storehouse position which specially establishes to the steel frame on, then returns

to HP again, again cuts the crane automode, then arrives under the loction thing

feed box the storehouse station, then cuts the manual pattern again, returns this thing

feed box to the crane on, then returns to HP, again cuts the online pattern, direct

start then, the system can automatically move.

4. If discovered the crane in goes into storage in the process the newspaper to be wrong, after in the ordinary circumstances corrects the mistake to return to online again pattern start then.

5. After the crane and goes into storage stands exceptionally, suggests the inquiry correspondence the work files id condition, if is unable normal over, must act according

to actual goes into storage the condition to carry on finish either cancel or move.




35

Program Codew_asr_pdc_re_store

Program DescriptionAgain Storage in asrs Confirm(Check&&Pick Up&&Combine Storage)

Functiondispose Parent Classw_sysbase0

Datebase Tableasr_wrk_detp Use DepartmentStorage management department

Correlative ProgramWork File Query And MaintenanceAsrs Stock QueryWork File Log Query

Station Data Setup and Station Query

Use opportunitySorts the material, and the board, inventorying goes into storage again. User Interface

Purpose

Get the correspondence to sort the material which the material, inventorying, and the board

stands, the production goes into storage again the work files, makes an appointment the

corresponding storage location.


u Field explanation i. Picking Station: Needs stand which the user choice goes into storage again

ii. Other fence location values withdraw by the system from the work filecan not modify u Startup button Explanation 1If works normallyplease Below refer to the information

Production warehousing work files material informationAfter the success demonstrated

again storage successfully

refresh stock conditionRefresh the stock condition which in the corresponding stock

material files is Q (sorts material/inventorying/and board goes into storage again)

2If appears the abnormal phenomenonplease Below refer to the information

The material information is unusual

n Prompt "No Work File Data!!! " In expression work files not this material information. Processing planPlease inspect this material is whether correct.

n Prompt "The stock status is not picking!" Indicated the storehouse location condition




36

for does not sort material/inventorying/and the board Processing planPlease inspect this material information whether for has again to

go into storage the material information

n Prompt Out Stock data not Updating ! -->>Work Status14 !The expression work files material information is not correct or this material condition is not 14 . Processing planIn inspection work files this material whether already was 14retrival

is completed

n Prompt "Only check or picking or cominbe can into Stock!" Indicated this material is not sorts material/inventorying/and the board material information

Processing planIn inspection work files this material whether already for sorts

material/inventorying/and the board material.

n Prompt "The same station can not generate two works no in the same time!" Indicated goes into storage in the work files to have the source stand to go into storage the

station number for this and the active status is 1.

Processing planOnline work in processing or The work files material information has

exceptionallyuser should do it by Actual situation

The crane goes into storage the station to be possible to use or to have the thing or

is automatic exceptionally

n Prompt Crane store in station not avaible! In inspection Crane store in station not avaible.

Processing planthis storage stand of storage state mast be possible to useMust

for be possible to enter or to be automatic

To have the storehouse location, the stand, the production work files

material unusual information.

n Prompt Update [asr_wrk_masp] is error!The expression refresh the work shopkeeper files material information to make a mistake

Processing planExamines work shopkeeper files material information

n Prompt Update table [sjasrs.asr_bas_devp] is Error!The expression refresh the equipment files material information to make a mistake

Processing planExamines the equipment files material information

n Prompt Update table [sjasrs.asr_stk_mast] is Error!The expression refresh the storehouse files material information to make a mistake

Processing planExamines the storehouse files material information

Remark




37

3.3 ASRS STOCK Program Codew_asr_stk_mast Program DescriptionAsrs Stock Query

FunctionQuery Parent Classw_sysbase3

Datebase Tableasr_stk_mastasr_stk_detl

Use DepartmentWarehouse management department and related department

Correlative ProgramWork File Query And MaintenanceStation Data Setup and Status Query

Crane Data Setup And Status Query

Use opportunityAccording to the storehouse location, the warehouse Location code number, the

storehouse location condition and so on inquire time the ASRS stock material uses User Interface

Purpose

ASRS each storehouse location newest condition and material.


u May show the table body and table head various fences position to carry on the combination inquiry

u Table head Main demonstration storehouse location number, warehouse code number, storehouse location

condition, materials and so on crane serial number, line, row, level.

u Table body Corresponding table current recording material, if the table head storehouse location condition

is O,The D, S table body will not all have the material; If the table head storehouse location

condition is R, P, F, Q,The table body will demonstrate in this storehouse location material.

Remark

1. This window only can carry on the inquiry function, its edition revision function only supplies when the wise test uses, if the stock material is not correct, Must procedure carry on processing through ASRS Auto Warehouse the Ajustment.




38

2. When the crane or the conveyor is unusual, the corresponding storehouse location condition has the possibility to be unusualmust act according to certain principle, procedure

carries on processing through ASRS Stock Adjust the Entry




39

Program Codew_asr_stok_locpro

Program DescriptionAsrs Stock Query(By Location+Product)

Functionquery Parent Classw_sysbase4



Use opportunityAccording to inquiry automatic warehouse stock material detailed when uses

User Interface

Purpose

Inquires the ASRS stock material by a grid form to be detailed Operation Declaration

Remark

1. Will keep in stock the main information demonstration in a grid windowmay realize the convenience quick inquiry.

2. The window right under angle carried on to quantity has compiled




40

Program Codew_asr_stok_sumpro

Program DescriptionAsrs Stock Query(Sum By Product)




Use opportunityInquires the ASRS stock material detailed according to the product

classification when uses

User Interface

Purpose

Inquires the ASRS stock material by a grid form according to the product classification to

be detailed Operation Declaration

Remark

1. Will keep in stock the main information demonstration in a grid window, may realize the convenience quick inquiry

2. In the stock the identical product carried on to quantity has compiled




41

Program Codew_asr_erp_com Program DescriptionCompare asrs stock with erp-asrs


Datebase TableUnder ERP storehouse archive, under ASRS automatic warehouse asr_stk_mast,

asr_stk_detl


Use opportunityCompared with inquiry automatic warehouse stock material and when ERP backup

stock material uses

User Interface

Purpose

Under the asrs system, does not need to enter the erp system, directly quite automatic warehouse

stock material and ERP stock material similarities and differences Operation Declaration

1. Clicks on the Start button,The system automatically carries on ERP and the ASRS stock material contrast through the data pipeline between, and demonstrates the difference

2. total: The system carries on the stock comparison the total 3. Rows RecordThe system carries on the comparison, changes over to when the material

reads quantity

4. Rows WritenThe system carries on the comparison, changes over to when the material reads in quantityWith Rows Record synchronization

5. Error: The system carries on the comparison to each materialchanges over to when counts wrong number which possibly appears

6. Time: The system carries on the comparison to each materialcalculates the neighboring two materials change over to when time-gap.

Remark

1. Only then works as when with ERP database connection, can use this procedure to carry on the stock material to compare

Cannot click on the Start button continuouslyWhen each time clicks on the Start button, must




42

be separated period of timeThis time Rows Record read quantity becomes static by the window in

time forafter waits the material read to complete only then once more clicksOtherwisewill

be inaccurate compared with the material result




43

3.4 WAIT FOR ASRS PROCESS DATA Program Codew_asr_wat_mast Program DescriptionWait For ASRS Process Data Query And Maintenance

FunctionqueryAddition Parent Classw_sysbase3

Datebase Tableasr_wat_mast,asr_wat_detl

Use DepartmentWarehouse management departmentIT department and related department

Correlative ProgramWait For ASRS Process Data Log QueryAsrs Stock QueryWork File Query

And Maintenance

Use opportunityInquires when the ERP issuing processing notice files material usesWhen WISE

test order increases informs into/Publishes when the storehouse material uses

User Interface

u Table headthe demonstration waiting processing files basic information u table bodyCorresponding waiting processing files detailed material

Purpose

And reads in among through the repayment procedure from the erp waiting processing files

extraction materialProvides into/Leaves the warehouse inventorying the merge sorts the

material storehouse location shifting the storehouselocation adjustment material examination


u Table head Field 1. DateThe system can a supplied automatically current datecannot input




44

2. Sheet noCannot inputSystem automatic production 3. Work No: Work files ID number 4. Id Time: When production work files produces time 5. Take Time: In ERP material time 6. Take Mark: In ERP material symbol 7. Cancel Time: Cancels processing the time 8. Cancel MKCancels processing the symbol 9. Finish Time: ASRS completes time 10. Finish MK: ASRS completes symbol 11. Erp fsh Time: ERP completes time 12. Erp fsh MK: ERP completes symbol 13. All fsh Time: ASRS and ERP completes time 14. All fsh MK: ASRS and ERP completes symbol 15. Modi User: modifiy user 16. Modi Time: modifiy man u Table body Field ERP waits in the processing files to capture the material to the ASRS waiting processing files, cannot input

u Button explanation Move to logWhen this notice files material is unable or does not need to carry on into

the storehouse, through this button renews ASRS the processing files the cancel field is Y,

terminates and shifts to the waiting processing history files. At the same time, renews ERP

the waiting processing files the cancel field is Y, cancels this material to enter the storehouse.

Therefore, this button use must be extremely careful

Cancle storeWhen processing material for warehousing or spatial stack board warehousing,

renews ASRS through this button the processing files the cancel field is Y, terminates and

shifts to the waiting processing history files, simultaneously, renews ERP the waiting

processing files the cancel field is Y, cancels this material the warehousing. Therefore, this

button use must be extremely careful

Archive explanation

Remark




45

Program Codew_asr_wat_log_query Program DescriptionWait For ASRS Process Data Log Query


Datebase Tableasr_wat_mast_log,asr_wat_detl_log


Correlative ProgramWait For ASRS Process Data Query And Maintenance

Use opportunityInquiry completes waiting processing files material

User Interface

u Table headWaiting processing files basic information u Table bodyWaiting processing files detailed material

Purpose

ASRS after waited for in the processing files the data processing completes changes over to

this windowconvenience inquiry


Archive explanation

Remark

This window only provides the inquiry




46

Program Codew_asr_out_mast

Program DescriptionWait For asrs Retrieval Maintenance(NOT ONLINE)

Functioninsert Parent Classw_sysbase3


Use DepartmentStorage management and so on related department

Correlative ProgramASRS Stock Query, Wait For ASRS Process Data Query And Maintenance

Use opportunityWhen the ASRS and ERP break to open a conjunctionASRS gives an retrieve order

User Interface

Purpose Carries on the stock material to retrieve or to picking Operation Declaration Right side clicks keeps in stock the material inquiry and the choice button, renovates the stock material, chooses the retrieve/to picking stock material, clicks on the Confirm button,takes out the corresponding material, then clicks on the save,product the waiting processing files

May choose many location number to carry on retrieve or picking




47

Program Codew_asr_stk_adj Program DescriptionASRS Stock Adjust Entry(NOT ONLINE)

Functioninsert Parent Classw_sysbase3


Use DepartmentStorage management and so on related department

Correlative ProgramASRS Stock Query, Wait For ASRS`s process data Query and Maintenance

Use opportunityWhen the ASRS and ERP break to open a conjunctionand the discovery computer

stock and the actual material or the condition do not tally carry on the adjustment

User Interface

u Table headThe demonstration adjusts the main files material fence location which the

single basic information and this storage location initial state as well as needs to adjust.

u Table bodyDemonstrates this storage location the primitive detailed material Purpose

Adjust ASRS`s statue at one of the storage location Adjust the location stock data

at one of the storage location.


u Table Head Field 1. DateAdjustment date, The system can automatically entrust with a current date

2. Sheet noCannot inputthe system will Automatic production. 3. ERP Transfer: Fixed is Ncannot input. 4. WarehouseCannot inputthe system will Automatic production. 5. LocationNeeds to adjust storehouse position number, if Inputs correctly, Then get something about the condition of storehouse location, storehouse location type, Pallet type, Tank type, and display them into the data window on the table and the table body. location statusThe system can automatically demonstrate the original condition ,if




48

need to adjust the condition, Must input the newest condition in right side, Attention, adjust the state of storehouse location, The table body information possibly can carry on the corresponding adjustment

6. IO Typelocation Stock adjustment type, Specific is 200,cant modify 7. Whs Type: Storehouse location type, The system can automatically

demonstrate the original condition , if need to adjust the condition, Must input the newest condition in right side

8. Pallet Type: Pallet type, the system can automatically demonstrate the original condition, if need to adjust the condition, Must input the newest condition in right side.

9. Tank Type: Tank Type, The system can automatically demonstrate the original condition, if need to adjust the condition, Must input the newest condition in right side.

10. remarkDirect input u Table body field 1. Lot No: This fence location cannot modify in the original material information. If need to modify ,must insert a new row, then input a new lot No, Other fence location values imitate that original material information correspondence fence location

value which must modify, and modify this original material information the quantity is

the negative number.

2. WarehouseThis fence location cannot modify in the original material information. If need to modify ,must insert a new row, then input a new warehouse, Other

fence location values imitate that original material information correspondence fence

location value which must modify, and modify this original material information the

quantity is the negative number.

3. Other fence location revisions may carry on the revision in the original material information. If must adjust the quantity, must in the original quantity the revision be the negative number, after preserves can carry on the adjustment, For example: The original reserve has 80, now the adjustment is 50, then the correct operation for in

the original reserve 80 revisions is -30.

u Archive explanation : 1. If it is Normaldisplay the adjustment sheet of new in this window. 2. Put in the data to ASRS. The update procedure automatically will renew the ASRS stock data,

if time ERP segment at the appointed time automatically will renew in ERP the backup stock

material information.

Remark

Adjust All of the ASRS`s stock, adjust state of one of place for ASRS; Adjust stock material

information of one of place. All the things need this procedure to update.

1 Only insert a new data, cant modify, if you want to modify again, please insert a new sheet no.

2 This procedure only deal with asrss stock, if something the matter in the traditionary location stock, still needed to carry on the adjustment in ERP, and you need to adjust it by yourself.

3 If in the ERP connects, the update procedure automatically will renew in ERP this storehouse location backup asrs stock material information. After carries out this running best to

Inspects asrs the location stock material information.




49

3.5 WORK FILE Program Codew_asr_wrk_mast Program DescriptionWork File Query And Maintenance

Functionqueryprocessing Parent ClassW_Sysbase3

Datebase Tableasr_wrk_maspasr_wrk_detp


Correlative ProgramWork File Log QueryAsrs Stock QueryStation data Setup and Status Query

Crane data Setup And Status Query

Use opportunityInquiry/Processes ASRS and the conveyor each kind of active status User Interface

u Table headwork notime statusio type storehouse locationStands and so on the

informations

u Table bodywork no detailed material information Purpose

When ASRS storehouse location material change, produces work no and the related information

in this window DponlineRepays carries on processing to the work no material


n RadioButton Declaration The work files set scope which mainly is provides when inquiry sees

u AllAll material information u On HoldWork Status is 1 or is 11 value materials u Running1



50

storage with the stand information, including detailed material

2. Work No TimeProduces Work no the date time 3. StatusWork no newest executing state 4. Sheet No: Work no correspondence sheet numbers 5. Io TypeWork no correspondence goes into storage the type 6. Inventory Warehouse: Work no correspondence warehouse code number 7. PriorityLeaves the storehouse/to go into storage the priority 8. Crn No: Work no correspondence crane serial number 9. S.stnD.StnWork no correspondence start stand and stop stand 10. S.locationD.LocationWork the no correspondence crane work start storehouse location

and stops the storehouse location

11. DrumBox category 1.Oil2. Plating 12. pickingfullexitemptypause,waitingfileSeparately expressed this id, whether sorts

the material, the entire board leaves the storehouse, goes into storage draws back the

storehouse, spatial box, whether suspends, whether the material is by the material which

informs to go into storage changes over to

13. Update AbnormityIf non- N, indicated when update system renewal work files material 14. appears exceptionally, observes remark the material 15. Finish TypeWork no termination type 16. Crn Start TimeCrn End TimeThe recording corresponding this work no crane starts and

completes the time, automatically reads in by the Online system.

17. Picking Out TimeThis field record corresponds on work no the storehouse id time

n Table Body Field explanation 1. Lot NoWork No correspondence material batch number 2. Product Business CodeWork No corresponding material production system regulation section 3. Domestic demand Type: Work the No correspondence material sales type, divides sells

internally, outside sells

4. Products Code: Work No correspondence material product code 5. Customer Products Code: Work No correspondence customer product serial number 6. Customer ID: Work No corresponding customer ID 7. Customer Code: Work No correspondence customer code number 8. Order Number: Work No corresponding PO number 9. Order Seq: Work No corresponds the PO serial number 10. Pack: Work No correspondence material packing code number 11. Unit: Work No correspondence material unit 12. Pack Unit Qty: Work No correspondence material each box quantity 13. Pack Qty: Work No correspondence material box number 14. Unit Weight: Work No correspondence material single weight. 15. Inventory Qty: Work No correspondence material total quantity 16. Inventory Grade: Work No correspondence material product grade 17. Material Lot no: Work No corresponding line material Barcode 18. Input Date: Work the No correspondence material packing completes the time which

goes into storage

19. Inventory State: Work No correspondence material storehouse location condition




51

n Button explanation u Finish

When the crane either the computer system or the conveyor are unusual, after leaves goes into storage and so on the work completes when this id condition is unable normally to complete, must through artificially carry out this button to terminate. After carries out this order, this work files record can complete, and renewal corresponding storehouse position condition, therefore, certainly must be careful, when necessity, must carry on stock inventorying

When chooses some work the no correspondence the record, clicks on the button, the system

can prompt "Are you sure to finish!"After the determination the system can renew the work files: Work the Status renewal is 4Work Status10 condition renewal is 14Finish Type is BRemarkmaterial is Finish By+ Operator + Finish operating time.Sshifts through the repayment system this work files material to the work history filesSimultaneously renew the automatic warehouse

stock and the stock

status

The system also possibly can prompt "The Location has been occupied!"Expressed the goal

storehouse position has made an appointment takes,cannot complete the corresponding completed

work

u Cancel When the crane either the computer system or the conveyor are unusualMust through

artificially carry out this button to carry on cancelAfter carries out this order, this work

files recording shifts to the work history backup files, and renewal corresponding storehouse

position conditionIf simultaneously is goes into storage, but also must cancel erp information

and so on stock appointment. Therefore, certainly must be careful, when necessity, must carry

on stock inventorying

When chooses some work no correspondence the record, clicks on the buttonThe system can

judge whether with ERP connection, if has not connected, the system will be unable to carry on

Cancel, Otherwise, the system can prompt "Are you sure to Cancel!"After the determination the system can renew the work files, main processingwhen work Status10and



52

starts from the production work files to the present to process the time which this

material treats not to surpass 1 day

Processing planOnly the waiting time surpasses 1 day-long material to be able to

carry on processing

Prompt Update [sjasrs.asr_stk_mast] is error!The expression renews the ASRS stock defeat

Processing planThe storehouse puts on file whether has LocationWhether Loc Sts

does tally

Prompt Update [sjasrs.asr_wrk_masp] is error!Expression renewal work files material defeat

Processing planWhether in the work files material has this ID

Prompt Update [sjasrs.asr_wat_mast] is error!The expression renews the ASRS waiting processing files defeat

Processing planExamined the ASRS waiting processes the main files material,

whether has conforms to this material

Prompt Update [sjmis.asr_wat_mast] is error!The expression renews the ERP waiting processing files defeat

Processing planExamined the ERP waiting processes the main files whether has this

material

Prompt Insert into [sjasrs.asr_wat_mast_log] is error!Expression production waiting processing history main files material defeat

Processing planExamined the ASRS waiting processes the main files material, whether

has conforms to this material

Prompt Insert into [sjasrs.asr_wat_detl_log] is error!Expression production waiting processing history files detailed files material defeat

Processing planExamined ASRS waiting processing files detailed files material,

whether has conforms to this material

Prompt Delete [sjasrs.asr_wat_mast] is error!The expression deletion waiting handles the main files material defeat

Processing planExamined the ASRS waiting processes the main files material, whether


Prompt Delete [sjasrs.asr_wat_detl] is error!Expression deletion waiting processing files detailed files material defeat

Processing planExamined ASRS waiting processing files detailed material, whether


Prompt Insert into [asr_wrk_masp_log] is error!Expression production work history main files material defeat

Processing planExamined ASRS work main files material, whether has this ID material

Prompt Insert into [asr_wrk_detp_log] is error!Expression production work history files detailed files material defeat

Processing planExamined ASRS work files detailed files material, whether has this

ID material

Prompt Delete [asr_wrk_masp] is error!Expression deletion work main files material defeat

Processing planExamined ASRS work main files material, whether has this ID material




53

Prompt Delete [asr_wrk_detp] is error!Expression deletion work files detailed files material defeat

Processing planExamined ASRS work files detailed files material, whether has this

ID material

u Move To Log When crane either computer system or conveyor exceptionally or manual control crane

Causes regarding this workid, also cannot finish, when cannot cancelPossibly must carry out

this instructionWill work the files material to move directly merely to the historical backup

files, does not carry on any processing to the stockTherefore, must certainly be careful,

when necessity, must carry on stock inventorying

If carries out this button, will renew Finish Type will be D.Manu Move To LogRemark is

Move By: +operator+ Completes the Move operating timeRenews the ERP waiting to process in the main files this material Cancel field is YSimultaneously renews the ASRS waiting to process

in the main files this material Cancel field is YChanges over to in the waiting processing

history files ASRS waiting processing files in this materialDeletes in the ASRS waiting

processing files this material, the production work history files materialThe work files

material puts to the historical files in, after the Move running completesThis ID

correspondence work files material deletion

If appears the abnormal phenomenon below, please refer to prompts and makes processing

Prompt Update [sjmis.asr_wat_mast] is error!The expression renews the ERP waiting to process the main files material to make a mistake

Processing planExamined whether in the ERP waiting processing files has this chooses

the material which the material Sheet NO corresponds

Prompt Update [sjasrs.asr_wat_mast] is error!The expression renews the ASRS waiting to process the main files material to make a mistake

Processing planExamined whether in the ASRS waiting processing files has this chooses


Prompt Insert into [sjasrs.asr_wat_mast_log] is error!he expression production waiting processing history files material makes a mistake



PromptInsert into [sjasrs.asr_wat_detl_log] is error!The expression production waiting processing history detailed files material makes a mistake



Prompt Delete [sjasrs.asr_wat_detl] is error!The expression deletes the ASRS waiting processing detailed files material to make a mistake

Processing planASRS waited for whether in the processing detailed files has this

chooses the material which the material correspondence Sheet NO corresponds

Prompt Delete [sjasrs.asr_wat_mast] is error!The expression deletes the ASRS waiting to process the main files material to make a mistake

Processing planASRS waited for processes in the main files whether has this chooses

the material which the material correspondence Sheet NO corresponds

Prompt Update [asr_wrk_masp] is error!The expression renewal labor takes




54

responsibility the files material to make a mistake

Processing planThe labor takes responsibility in the files whether has this ID

correspondence the material

Prompt Insert into [asr_wrk_masp_log] is error!The expression production work history mian files material makes a mistake

Processing planThe labor takes responsibility in the files whether has this ID

correspondence the material

Prompt Insert into [asr_wrk_detp_log] is error!The expression deletion work main files material makes a mistake

Processing planWorks in the detailed files whether has this ID correspondence the

material

Prompt Delete [asr_wrk_masp] is error!The expression deletion work main files material makes a mistake

Processing planWhether in the work files has this ID correspondence the main files

material

Prompt Delete [asr_wrk_detp] is error!The expression deletion work files detailed material makes a mistake

Processing planWhether in the work files has this ID correspondence the detailed

material

u Add Prio Adds 1 to the existing first rank valueThe rank is first higher, theoretically more first

processesWhen needs is urgent storehouse processing, may through this button carry on

processingThis system does not have the significance to the warehousing priority adjustment

Its warehousing order by it on conveyor position decision

u Sub Prio Reduces 1 to the existing first rank valueThe rank is first lower, theoretically more

arranges in behind to processThis system does not have the significance to the warehousing

priority adjustmentIts warehousing order by it on conveyor position decision

u Wait In(Change Status) Main processing plc which stands in the delivery to storehouse is unusualpc already

sent out for the plc start instructionbut pc and plc correspond unusuallyHas not received

this instruction, needs to pass this buttonWill correspond the stand the work files work

no status again revision will be 1gives the plc issuing instruction once moreIf clicks

on this button, system prompt Are you sure to change status? after ConfirmationThe system

can renew the work files materialWork Status is 1Finish Type is ERemark is : Change By +operator+ Completes the Chang operating time Moreover, also possibly prompts Only the status is CV IN can change! In the expression warehousing work only then transports for the equipment moves under the condition only then

to be possible to begin using this running

Remark

Work no and corresponding stausio_type are the entire asrs system execution keyUnder

dp, online, update workRenews the erp stock, aspects and so on backup ASRS material all is

extremely important

This table material cannot process the change artificially, otherwise possibly can cause the

system to be unable the normal operation



Wise automation engineering(Zhej

ASRS COMPUTER SOFTWARE SYSTEM USER MANUAL_0906.pdf

Documents

Transcript of ASRS COMPUTER SOFTWARE SYSTEM USER MANUAL_0906.pdf