ASN Nortech loop detector
-
Upload
abdul-gaffar -
Category
Technology
-
view
72 -
download
4
Transcript of ASN Nortech loop detector
Nortech Detection Pty Ltd Tel: 02 8977 4047 Fax: 02 9475 4742
Unit 1, Bldg 5, 49 Frenchs Forest Rd., Frenchs Forest, NSW 2086 email: [email protected]
P O Box 6011, Frenchs Forest DC, NSW 2086 web: www.nortechdetection.com.au
Compact Size:
The compact aesthetically pleasing housingcombined with all the industry requirementsregarding features and functionality allows thisdetector to be incorporated into any new or existingvehicle detection system.
Diagnostic Capabilities:
The software of this unit allows comprehensivediagnostics capabilities in conjunction with separateDU100 hand-held diagnostics readout. Advanceddiagnostics features are covered by Internationalpatents.
Selectable Permanent Presence:
Using this feature, the output of the presence relaywill be maintained for an indefinite period, therebyeliminating premature barrier/gate/door closure andpossible vehicle damage.
Loop Isolation Protection:
The loop isolation transformer provides protectionagainst lightning and transient damage and allowsfor operation with single point to ground sensorloops.
Loop Frequency Indication:
The possibility of crosstalk (interference) betweenadjacent loops/detectors can be determined by anintegral indication, and eliminated by changing thefrequency settings.
Single Channel Inductive LoopVehicle Detector
PD132 / PD134
The PD130 series is a single channelmicroprocessor based detector designedspecifically for parking and vehicle access controlapplication. The PD130 has been designed usingthe most up-to-date technology in order to meet therequirements of a vast number of parkingapplications in terms of operating conditions andoptions available to the user.
The primary function of the detector is to detectvehicle presence by means of an inductancechange caused by the vehicle passing over a wireloop buried under the road surface.
PART NUMBERS301FT0101 PD132D Nortech 240 VAC301FT0122 PD134D Nortech 12-24v DC/DC301FT0175 PD134D Delay 0 - 4 sec 12-24v DC/DC
Automatic Sensitivity Boost (ASB):
This feature facilitates the reliable detection oflarge truck-trailer combinations and high-bedvehicles by automatically boosting the sensitivityto maximum on detection of a vehicle.
Detect Filter:
Selection of the filter option will provide a finiteturn-on delay, thus allowing small or fast-movingobjects to pass over the loop undetected.
• Parking barrier control
• Vehicle access control
• Motorised gates and doors
• Industrial control systems
FEATURES
APPLICATIONS
PD132 / PD134 PD132-PD134_ds.pdf
Self tuning 20-1500µHrange:
Sensitivity: Four step adjustable on face-plate:
High: 0.02% ΔL/L Medium High: 0.05% ΔL/L Medium Low: 0.1% ΔL/L Low: 0.5% ΔL/L
Frequency: Four step adjustable on face plate,12- 80kHz (frequency determinedby loop geometry)
Output 2 output relays:Configuration Relay 1 = Presence output
Relay 2 = Pulse output
Pulse output Approx. 150msduration: Factory option 250ms
Presence time: 1 hour for 3% ΔL/L and permanent presence option
Operating Four way Mode selector on face-modes: plate
1. Limited presence/ permanentpresence2. Pulse on detect/Pulse onundetect3. Automatic Sensitivity Boostoff/on4. Filter off/on (2 second delay)
Indications: The following face-plate indicationsare provided:Red LED – power;Green LED – channel indicator1. Tuning – on steady followed byflashing frequency count (x 10 kHz)2. Undetect – off3. Detect – on steady4. Fault – on with short off
Protection: Loop isolation transformer, zenerdiode clamping on loop inputs andgas discharge tube protection
Power 120V AC ± 15% 48-60Hz (PD131)requirements: 240V AC ± 15% 48-60Hz (PD132)
12-24V AC/DC ± 15% (PD134)1.5VA max @ 230V
Presence 5A @ 230V ACOutput Relay: Change-over contacts (fail-safe)
Pulse relay: 5A @ 230V ACChange-over contacts (non-fail-safe)
PD132 / PD134
Operating temperature range: -40ºC to +70ºC
Mechanical detail:
Material: High heat ABS blendDimensions: 78(H) x 41(W) x 80(L)mm
Mounting: Shelf or DIN-rail socket
Connector: Single rear mount 11-pinsubmagnal (JEDEC No. B11-88)
Options: 1 metre flying lead11 pin screw terminal Base
pin designation
1 Live 230V AC 50/60 Hz OR2 Neutral 12 - 24V AC/DC
3 Pulse Relay Normally Open contact
4 Pulse Relay Common contact
5 Presence Relay Normally Open contact
6 Presence Relay Common contact
7 Loop Twist this
8 Loop pair
9 Earth
10 Presence Relay Normally Closed contact
11 Pulse Relay Normally Closed contact
301FT0041 1 metre flying lead
CTR 119090 11 pin Relay Base
TECHNICAL DETAILS
WIRING DETAILS
OPTIONAL ITEMS