asme cCase_2053
2
117 Asme BPVC Code Cases 1998 Edition CCASE12053 06-15-98 13:10:46 CASE 2053 CASES OF ASME BOILER AND PRESSURE VESSEL CODE Approval Date: December 2, 1988 See Numeric Index for expiration and any reaffirmation dates. Case 2053 For Materials in Inventory Sections I, IV, and VIII, Divisions 1 and 2 Inquiry: May material in inventory which meets the requirements of a Section II material specification that was superseded and meets the requirements of the current specification except for the more restrictive chemical compositional requirements of the current Section II specification, be used in Code construction? Reply: It is the opinion of the Committee that material in inventory which meets the requirements of a Section II material specification that was superseded, and meets the requirements of the current specification except for This is Electrontic File Page # 117 the more restrictive chemical composition requirements of the current Section II specification, may be used in Code construction provided the following requirements are met. (a) There is no prohibition on the use of the specifi- cation that was superseded in the rules of the Code, providing that specification has been accepted by, and stress values published in the specific Code Section for which it is to be used. (b) The material shall have been melted when the chemical requirements of an ASME approved material specification that has been superseded were in effect. (c) This Case number shall be included with the required specification marking of the material and in- cluded with the Manufacturer’s Data Report.
Transcript of asme cCase_2053
117
Asme BPVC Code Cases 1998 Edition CCASE12053 06-15-98 13:10:46
CASE
2053CASES OF ASME BOILER AND PRESSURE VESSEL CODE
Approval Date: December 2, 1988
See Numeric Index for expirationand any reaffirmation dates.
Case 2053For Materials in InventorySections I, IV, and VIII, Divisions 1 and 2
Inquiry: May material in inventory which meets therequirements of a Section II material specification thatwas superseded and meets the requirements of thecurrent specification except for the more restrictivechemical compositional requirements of the currentSection II specification, be used in Code construction?
Reply: It is the opinion of the Committee that materialin inventory which meets the requirements of a SectionII material specification that was superseded, and meetsthe requirements of the current specification except for
This is Electrontic File Page # 117
the more restrictive chemical composition requirementsof the current Section II specification, may be used inCode construction provided the following requirementsare met.
(a) There is no prohibition on the use of the specifi-cation that was superseded in the rules of the Code,providing that specification has been accepted by, andstress values published in the specific Code Sectionfor which it is to be used.
(b) The material shall have been melted when thechemical requirements of an ASME approved materialspecification that has been superseded were in effect.
(c) This Case number shall be included with therequired specification marking of the material and in-cluded with the Manufacturer’s Data Report.
Asme BPVC Code Cases 1998 Edition CCASE12053 06-15-98 13:10:46
This is Electrontic File Page # 118
