ASHRAE 62.2 Ventilation and Acceptable Indoor Air Qualit (3)
ASHRAE 62.2 Mechanical Ventilation Specs
description
Transcript of ASHRAE 62.2 Mechanical Ventilation Specs
![Page 1: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/1.jpg)
ASHRAE 62.2Mechanical Ventilation Specs
![Page 2: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/2.jpg)
ASHRAE Standard 62.2 (2010) Full Disclosure
Excerpt from page 56:• For any type of weatherization measure installed in accordance with this specifications manual, the
contractor shall provide the homeowner with written documentation describing ASHRAE Standard 62.2 (2010) and recommendations for mechanical ventilation in compliance with this standard.
• The document shall accurately list the benefits to indoor air quality of complying with this standard and the main steps that need to be taken to be in full compliance. *
• The document shall include space for the homeowners’ signatures along with check boxes indicating whether they wish their contractor to fully comply with ASHRAE 62.2 (2010), or if they waive compliance.
Problem: There is nothing to suggest informing the homeowner of the problems to be encountered in sealed homes with inadequate, or misused mechanical ventilation will result in improved outcome.
![Page 3: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/3.jpg)
ASHRAE Standard 62.2 (2010) Full Disclosure Continued…
Excerpt from page 57:• Homeowners who choose to implement mechanical ventilation measures that
only partially comply with ASHRAE 62.2, or comply with previous versions of ASHRAE residential ventilation standards, will have to check the box indicating they are waiving compliance with ASHRAE 62.2 (2010) and sign the document.
• A copy of this signed document must be left with the homeowner and another copy kept by the contractor.
Problem: The focus is on liability – not on fully educating the homeowner to the problems
![Page 4: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/4.jpg)
This is not a new issue
• Research studies have consistently demonstrated that the culture, attitudes and behavior of homeowners/residents is the single most important factor in determining how well sealed houses function.
![Page 5: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/5.jpg)
1999 WSU Report
Washington State Ventilation and Indoor Air Quality Code Whole House Ventilation
Systems Research ReportJohn DevineRick Kunkle
Michael LublinerWashington State University Extension Energy Program
![Page 6: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/6.jpg)
Findings In Owners of New Homes:
58% of respondents had changed the settings on their timer
![Page 7: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/7.jpg)
Findings In Owners of New Homes:
The average period of mechanical ventilation was changed to 3.4 hours
The VAIQ required the timer be set at 8 hours per day to maintain minimal air quality
![Page 8: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/8.jpg)
Conclusion - in 1999
Even owners of new homes who are educated about the importance of mechanical ventilation, do not adhere to the prescribed ventilation regimen.
![Page 9: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/9.jpg)
What’s Happening in 2011?
Home owner manuals describing the need for whole house ventilation systems and operation have been provided to residents in new homes for over 10 years now.
Home owners are no more educated about issues then they were prior to the home owner manual.
And still we believe that educating the owner in a brief conversation is going to do the job?
![Page 10: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/10.jpg)
The Trenches
• What’s happening in the real world?
• What about renters, second owners, and Public Housing?
![Page 11: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/11.jpg)
Mark V. Hillman Telephone: 206.595.8569Construction Project ManagerSeattle Housing Authority
![Page 12: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/12.jpg)
Seattle Public Housing
Excerpt from Case Example House Report – Mark Hillman, Architect and Building Scientist
• We observed the following: • This townhouse was built ca. 1999 (estimated since permit information not available from
DPD), utilizing typical ‘speculative home’ materials and details for the times. The wall & roof assemblies include, from interior to exterior:
• Painted gypsum board, insulation (blown-in fiber glass in ceiling (R-38) and fiberglass batts in the walls (R-19). Vapor retarder is assumed in the multiple interior paint coatings.
• 2x6 stud wall framing, wall sheathing and WRB unknown, under cement fiber siding. • Roofing is composition shingles on plywood sheathing over pre-engineered trusses. • This is face-sealed type wall construction relying on excluding moisture at the exterior
face of the siding. • Windows are flanged vinyl frames with insulating glass units.
![Page 13: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/13.jpg)
Sample Site – February 8, 2011
![Page 14: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/14.jpg)
Sample Site – February 8, 2011Heavy condensation exists on the inside face of most windows. Organic growth and staining exists on window frames, sills, glass and other adjacent materials. Organic growth exists in the north wall of the northeast bedroom near the ceiling.
![Page 15: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/15.jpg)
Sample Site cont.
![Page 16: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/16.jpg)
Sample Site, cont.
The 24/7 operation bathroom fan, re-programmed by SHA yesterday, is not functioning so Jim reprograms it for proper operation.
There is organic growth on the ceiling of the bathroom.
![Page 17: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/17.jpg)
Sample Site cont.
![Page 18: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/18.jpg)
Sample Site, cont.No insulation exists over the gypsum board ceiling in the bathroom, and interior light is visible around the fan housing. Exhaust ducts are insulated, and appear to be connected to their roof terminations. A roof leak exists where the roof safety tie-off connection is fastened through the roof and sheathing. There is staining and organic growth on many areas of the roof sheathing and the truss members are damp to the touch.
![Page 19: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/19.jpg)
Conclusions:• Conclusions and Recommendations: • Educate residents on use of exhaust fans to minimize moisture problems, organic growth and indoor air
quality. • Equip the installed 24/7 fan with controls, secured to prevent resident disconnect or adjustment. • Replace gypsum board ceiling and treat surrounding areas to eliminate staining, prime/seal and paint. Use
gypsum board products similar to Georgia Pacific’s DensArmor Plus® Interior Panels. Seal fan housing to the ceiling board, seal, prime and paint. Make sure an air barrier is established at the light fixtures to keep the bathroom moisture from entering the attic.
• Clean, prime/seal and paint the stained areas in the northeast bedroom and all window sills and other stained areas.
• Replace ceiling insulation over the bathroom ceiling, after cleaning and sealing the stained framing material. Verify if proper clearance exists between cardboard insulation baffles and the roof sheathing.
• Evaluate the roof to determine if replacement, or simply cleaning and patching are required. Consider cleaning all roofs in this community if appropriate to extend their effective useful life. Make sure the ridge vents are functioning and the gypsum sheathing blocking the gable end vent is completely removed.
• Condensation on the window frames inside the building, and inside the walls, drains to the base of the window rough opening and into the walls below, windows should be removed where siding is replaced. Reinstall windows with the typical SHA window installation details including metal foil clad self-adhering membrane tape.
![Page 20: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/20.jpg)
Next Steps?
Are we really interested in solving the problem, or is our primary concern for our own liability?
![Page 21: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/21.jpg)
Other studies underway
• We at Tacoma Power, with BPA funding, have undertaken a small study to examine both fan function 5 to 10 years post-installation. Results are expected in May.
• DOE is currently testing 200 sites, monitoring for the impact of weatherization on indoor air quality.
![Page 22: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/22.jpg)
Best Approach
Oak Ridge National LaboratoryBruce Tonn and Scott Pigg
ORNL Winter Case Study Underway
![Page 23: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/23.jpg)
ORNL Weatherization Impact Study
• Randomly sampled 80 Super-Public Use Micro Data Areas, with an oversample in high radon areas
• Include approximately 550 single family homes in the treatment/control group study (~5/8 treatment)
• Compare pre- and post- weatherization sampling periods
![Page 24: ASHRAE 62.2 Mechanical Ventilation Specs](https://reader033.fdocuments.net/reader033/viewer/2022061407/5681672f550346895ddbd6bd/html5/thumbnails/24.jpg)
– Last Slide