ASAHI/AMERICA

Ball Check Valves SAMPLE SPECIFICATION All ball check valves shall be of solid thermoplastic construction, and shall be designed with an elastomeric uniseat/seal for tight-shut-off under pressure. Sizes through 2 shall be of Tru-union design, while 3 & 4 shall be single union design. The same seal shall function as both the ball seat and the union seal. PVC shall conform to ASTM D1784 Cell Classification 12454-A, CPVC shall conform to ASTM D1784 Cell Classification 23567-A, PP shall conform to ASTM D4101 Cell Classification PP0210B67272 and PVDF shall conform to ASTM D3222 Cell Classification Type II. Ball Check valves sizes 2 shall be rated 150 psi at 70 degrees F, 3 and 4 rated 100 psi at 70 degrees F, as manufactured by Asahi/America Inc.

ASAHI/AMERICA

DuoBloc-21 Ball Valves SAMPLE SPECIFICATION All True Union DUO-BLOC 21 Ball Valves, sizes to 4, shall be of true union design with two-way blocking capability. All O-rings shall be EPDM or FKM with Teflon seats. Teflon Seats shall have elastomeric backing cushion of the same material as the valve seals. Stem shall have double o-rings and be of blowout-proof design. The valve handle shall double as carrier removal and/or tightening tool. An ISO mounting pad shall be integrally molded to valve body for actuation. PVC conforming to ASTM D1784 Cell Classification 12454-A, CPVC conforming to ASTM D1784 Cell Classification 23567-A, PP Conforming to ASTM D4101 Cell Classification PP0210B67272 and PVDF conforming to ASTM D3222 Cell Classification Type II. The ball valves, except PP, shall have a pressure rating of 230 psi for sizes to 3 and 150 psi for 4 (150 psi for PP, all sizes) at 70 degrees F. Duo-Bloc 21 Ball Valves must carry a two-year guarantee, as manufactured by Asahi/America Inc.

ASAHI/AMERICA

Type C Gate Valve SAMPLE SPECIFICATION All Gate Valves shall be constructed of High Impact PVC and have no metal-tomedia contact. The gate shall be a tapered cylindrical plug design (PP or SBR). PVC shall Conform to ASTM D1784 Cell Classification 12454-A, & PP to ASTM D4101 Cell Classification PP0210B67272. Valves shall have a pressure rating of 150 psi at 70 degrees F sizes 1-1/2 thru 8, 110 psi at 70 degrees F size 10, and 75 psi at 70 degrees F sizes 12 and 14. The valve shall have a non-rising stem, come standard with sealed position indicator, clean out plug (PP gate style only) and EPDM or FKM seals as manufactured by Asahi/America Inc.

ASAHI/AMERICA

Globe Valves SAMPLE SPECIFICATION All Globe Valves shall be of Thermoplastic construction, and have no metal part that comes in contact with media. Sizes through 2 shall be of union bonnet design, 2 through 4 shall be of outside Stem and Yoke type. PVC shall conform to ASTM D1784 Cell Classification 12454-A and PP conforming to ASTM D4101 Cell Classification PP0210B67272. PVC valves shall be rated to 150 psi at 70 degrees F sizes thru 2 110 psi at 70 degrees F sizes 2-1/2 thru 4. PP rated to 110 psi at 70 degrees F sizes thru 4, as manufactured by Asahi/America, Inc

ASAHI/AMERICA

Labcock Ball Valves SAMPLE SPECIFICATION LABCOCK valves shall be of compact unibody construction having a lever handle, calibrated flow indicator and male threads, female threads, hose ends or elbow as part of the valves integral construction. Valves shall be constructed of PVC conforming to ASTM D1784 Cell Classification 12454-A. All O-rings shall be EPDM or FKM. LABCOCK valves are rated to 150 psi at 70 Degrees F, as manufactured by Asahi/America, Inc.

ASAHI/AMERICA

Type-23 Multiport Ball Valves SAMPLE SPECIFICATION All Type-23 MULTIPORT valves shall be of molded thermoplastic construction with union ends on all three ports. All O-rings shall be EPDM or FKM with Teflon seats. The valve handle shall double as carrier removing/tightening tool. Carriers must thread into the body in order to provide blocking capabilities in OFF position. An ISO mounting pad shall be integrally molded to the valve body for actuation. PVC conforming to ASTM D1784 Cell Classification 12454-A, CPVC conforming to ASTM D1784 Cell Classification 23567-A, PP conforming to ASTM D4101 Cell Classification PP0210B67272 and PVDF conforming to ASTM D3222 Cell Classification Type II. The valves shall be rated to 150 psi at 70 degrees F. as manufactured by Asahi/America, Inc.

ASAHI/AMERICA

Omni Ball Valves SAMPLE SPECIFICATION All OMNI ball valves size 3/8 3 shall be of one-piece compact design non union type. All O-rings shall be EPDM or FKM with Teflon seats. Seats must have elastomeric backing cushions of the same material as the valve seals. PVC conforming to ASTM D1784 Cell Classification 12454-A, and CPVC conforming to ASTM D1784 Cell Classification 23567-A. Valve shall be rated 150 psi at 70 degrees F, as manufactured by Asahi-America, Inc.

ASAHI/AMERICA

Sediment Strainer SAMPLE SPECIFICATION All True Union Sediment Strainers, Sizes 4, shall be of true union design and shall be constructed of transparent PVC. All O-rings shall be EPDM or FKM. Screens shall be 20, 30 and 40 mesh PVC or 20, 40 and 60 mesh 316 SS. Filter maintenance is achieved without removing strainer from the pipeline. PVC shall conform to ASTM D1784 Cell Classification 12454-A. Valves shall be rated to 150 psi sizes thru 2 and 85 psi sizes 3 and 4 at 70 degrees F, as manufactured by Asahi/America, Inc.

ASAHI/AMERICA

Swing Check Valves (O-ring Bonnet Seal) SAMPLE SPECIFICATION All Swing Check valves shall be of solid thermoplastic construction, having no metal that comes in contact with media. Valves shall incorporate a single disc design suitable for either horizontal or vertical installations. Valves shall be of top entry bonnet design for maintenance purposes. PVC shall conform to ASTM D1784 Cell Classification 12454-A, PP conforming to ASTM D4101 Cell Classification PP0210B67272 and PVDF conforming to ASTM D3222 Cell Classification Type II Valves shall be rated to 150 psi sizes thru 3, 100 psi sizes 4 thru 6, 75 psi size 8 for PVC or PP with EPDM or FKM seals, 85 psi sizes thru 2-1/2, 75 psi sizes 3 & 4, 60 psi size 5 and 45 psi sizes 6 & 8 for PVC with Teflon seals, 90 psi sizes thru 2-1/2, 75 psi sizes 3 & 4, 60 psi size 5 and 45 psi sizes 6 & 8 for PP or PVDF with Teflon seals all at 70 degrees F, as manufactured by Asahi/America, Inc.

ASAHI/AMERICA

Duo-Bloc Ball Valves SAMPLE SPECIFICATION All True Union DUO-BLOC Ball Valves, sizes to 4, shall be of True Union design with two-way blocking capability. All O-rings shall be EPDM or FKM with Teflon seats. Teflon Seats shall have elastomeric backing cushion of the same material as the valve seals. PVC shall conform to ASTM D1784 Cell Classification 12454-A, CPVC shall conform to ASTM D1784 Cell Classification 23567-A. All True Union DUO-BLOC Ball Valves shall have a pressure rating up to 150 psi. at 70 degrees F. True Union Duo-Bloc Ball Valves must carry a twoyear guarantee, as manufactured by Asahi/America Inc.

ASAHI/AMERICA

Type 56 Butterfly Valve SAMPLE SPECIFICATION All solid thermoplastic butterfly valves sizes 1-1/2 thru 16 shall be of the lined body design and bubble-tight seal (meeting or exceeding Class VI as defined by American National Standard Institute) with only the liner and disc as wetted parts. The lever handle (sizes 1-1/2 thru 8) shall have a molded provision for a padlock. Gear operators shall be worm gear design, self locking with diecast aluminum body and corrosion resistant powdercoat finish. The disc shall be of solid, abrasion-resistant plastic, have double o-ring seals on top and bottom trunnions of the same material as the valve liner. Liner shall be molded and formed around the body, functioning as gasket seals with convex ring design on each side of the valve for lower bolt tightening torque. Stem shall be of 316/403 stainless steel, non wetted and have engagement over the full length of the disc. Valves shall have a molded ISO bolt pattern on top flange for actuator mount. PVC shall conform to ASTM D1784 Cell Classification 12454-A, PP conforming to ASTM D4101 Cell Classification PP0210B67272, and PVDF conforming to ASTM D 3222 Cell Classification Type II. All PVC, PP and PVDF body valves shall be rated to 150 psi sizes 1-1/2 thru 10, 100 psi sizes 12 & 14 and 85 psi size 16 at 70 degrees F. Butterfly valves shall be wafer style, as manufactured by Asahi/America.

ASAHI/AMERICA

Type 75 Butterfly Valve SAMPLE SPECIFICATION All solid thermoplastic butterfly valves (18 thru 24 ) shall be of the lined body design and bubble-tight seal (meeting or exceeding Class VI as defined by American National Standard Institute) with only the liner and disc as wetted parts. The disc shall be of solid, abrasion-resistant plastic, have double o-ring seals on top and bottom trunnions of the same material as the valve liner. Liner shall be molded and formed around the body, functioning as a gasket seals with convex ring design on each side of the valve for lower bolt tightening torque. Stem shall be of 403 stainless steel, non wetted and have engagement over the full length of the disc. PP shall conform to ASTM D4101 Cell Classification PP0210B67272 and PVDF conforming to ASTM D3222 Cell Classification Type II. PP and PVDF bodies shall be rated to 70 psi size 18, and 50 psi sizes 20 & 24, at 70 degrees F. Butterfly valves shall be wafer style, as manufactured by Asahi/America.

ASAHI/AMERICA

Type 14 Flanged Diaphragm Valve (1/2 thru 4) SAMPLE SPECIFICATION All TYPE 14 flanged diaphragm valves shall be of solid thermoplastic construction for body and bonnet with molded flanged ends. The valves shall come standard with a position indicator, travel stop (to prevent over-tightening) and bonnet o-ring sealing arrangement. The valve shall be weir type with a square bonnet body sealing design and bayonet connection diaphragm (1/2 ~ 2) or round bonnet body sealing design and threaded stud diaphragm connection (2 ~ 4). All Teflon diaphragms shall accept the installation of a PVDF gas barrier between the layers of EPDM and Teflon for aggressive chemical service. The face-to-face dimensions shall conform to TYPE G. PVC conforming to ASTM D1784 Cell Classification 12454-A, CPVC conforming to ASTM D1784 Cell Classification 23567-A, PP conforming to ASTM D4101 Cell Classification PP0210B67272, PPG (Bonnet Only) conforming to ASTM D4101 Cell Classification PP0110M20A21130, and PVDF conforming to ASTM D3222 Cell Classification Type II. PVC, CPVC, PP and PVDF shall be rated to 150 psi for elastomeric and Teflon diaphragms at 70 degrees F., as manufactured by Asahi/America, Inc.

ASAHI/AMERICA

Type 14 Tru-Union Diaphragm Valve (1/2 thru 2) SAMPLE SPECIFICATION All TYPE 14 Tru-union diaphragm valves shall be of solid thermoplastic construction for body and bonnet with socket, threaded or butt end connectors.. The valves shall come standard with a position indicator, travel stop and bonnet o-ring sealing arrangement. The valve shall be weir type with a square bonnet body sealing design and bayonet connection diaphragm. All Teflon diaphragms shall accept the installation of a PVDF gas barrier between the layers of EPDM and Teflon for aggressive chemical service. PVC conforming to ASTM D1784 Cell Classification 12454-A, CPVC conforming to ASTM D1784 Cell Classification 23567-A, PP conforming to ASTM D4101 Cell Classification PP0210B67272, PPG (Bonnet Only) conforming to ASTM D4101 Cell Classification PP0110M20A21130, and PVDF conforming to ASTM D3222 Cell Classification Type II. PVC, CPVC, PP and PVDF shall be rated to 150 psi for elastomeric and Teflon diaphragms at 70 degrees F., as manufactured by Asahi/America, Inc.

ASAHI/AMERICA

Type 15 Flanged Diaphragm Valve (5 and 6) SAMPLE SPECIFICATION All TYPE 15 flanged diaphragm valves shall be of solid thermoplastic construction for body and bonnet with molded flanged ends. The valves shall come standard with a position indicator, travel stop (to prevent over-tightening) and bonnet o-ring sealing arrangement. The valve shall be weir type with a round bonnet body sealing design and threaded stud diaphragm connection. All Teflon diaphragms shall accept the installation of a PVDF gas barrier between the layers of EPDM and Teflon for aggressive chemical service. The face-toface dimensions shall conform to TYPE G. PVC conforming to ASTM D1784 Cell Classification 12454-A, PP conforming to ASTM D4101 Cell Classification PP0210B67272, PPG (Bonnet Only) conforming to ASTM D4101 Cell Classification PP0110M20A21130, and PVDF conforming to ASTM D3222 Cell Classification Type II. PVC, and PP shall be rated to 115 psi for elastomeric diaphragms at 70 degrees F. PVC, PP and PVDF shall be rated to 100 psi (5) and 70 psi (6) for Teflon diaphragms at 70 degrees F., as manufactured by Asahi/America, Inc.

ASAHI/AMERICA

Type G Flanged Diaphragm Valve (8 and 10) SAMPLE SPECIFICATION All TYPE G flanged diaphragm valves shall be of solid thermoplastic construction for body and bonnet with molded flanged ends. The valves shall come standard with a position indicator, travel stop (to prevent over-tightening) and bonnet o-ring sealing arrangement. The valve shall be weir type with a round bonnet body sealing design and threaded stud diaphragm connection. All Teflon diaphragms shall accept the installation of a PVDF gas barrier between the layers of EPDM and Teflon for aggressive chemical service. The face-toface dimensions shall conform to TYPE G. PVC conforming to ASTM D1784 Cell Classification 12454-A, PP conforming to ASTM D4101 Cell Classification PP0210B67272, PPG (Bonnet Only) conforming to ASTM D4101 Cell Classification PP0110M20A21130, and PVDF conforming to ASTM D3222 Cell Classification Type II. PVC, and PP shall be rated to 75 psi size 8and 65 psi size 10 for elastomeric diaphragms at 70 degrees F. PVC, PP and PVDF shall be rated to 60 psi for Teflon diaphragms at 70 degrees F., as manufactured by Asahi/America, Inc.

ASAHI/AMERICA

Type 14 Pneumatic Diaphragm Valves SAMPLE SPECIFICATION All TYPE 14 actuated diaphragm valves shall be of solid thermoplastic construction for body (Molded Flanged or Tru-Union socket, threaded or butt end connectors) and bonnet with the actuator housing of glass filled polypropylene. The actuator shall come standard with an at a glance position indicator and pad mount according to NAMUR for solenoid mounting. Air supply shall be 60 90 psi. The valve body shall have a panel mount feature for support. Actuator to body mount shall be of square design, diaphragm shall be bayonet type connection. Face-to-face dimensions of flanged version shall conform to Type-G. PVC conforming to ASTM D1784 Cell Classification 12454-A, CPVC conforming to ASTM D1784 Cell Classification 23567-A, PP conforming to ASTM D4101 Cell Classification PP0210B67272, PPG (Bonnet Only) conforming to ASTM D4101 Cell Classification PP0110M20A21130, and PVDF conforming to ASTM D3222 Cell Classification Type II. PVC, CPVC, PP and PVDF shall be rated to 150 psi for elastomeric and Teflon diaphragms at 70 degrees F., as manufactured by Asahi/America, Inc.

ASAHI/AMERICA

AV Gaskets SAMPLE SPECIFICATION All AV Gasket shall be of low torque, full face to ANSI B16.5 dimensions and shall have two concentric, convex, molded rings between center hole and bolt hole circle in EPDM, Teflon-bonded EPDM or PVDF-bonded EPDM, as manufactured by Asahi/America, Inc.

ASAHI/AMERICA

Type 55 Butterfly Valve SAMPLE SPECIFICATION All Type 55 butterfly valves shall be of Epoxy powder coated ductile cast iron body design and bubble-tight seal (meeting or exceeding Class VI as defined by American National Standard Institute) with only the liner and disc as wetted parts. The lever handle (sizes 2 thru 5) shall have a molded provision for a padlock. Gear operators shall be Mastergear with corrosion resistant powdercoat finish. Valves shall have a molded ISO bolt pattern conforming to 5211/I and 5211/II on top flange for actuator mount. The disc shall be of Teflon. Liner shall be of Teflon with Neoprene backing cushion. Stem shall be of stainless steel, not wetted and have engagement over the full length of the disc. The butterfly valves shall be wafer style, Valves shall be rated to 150 psi from 5 degrees F. to +210 degrees F., as manufactured by Asahi/America.

ASAHI/AMERICA

DuoBloc-21 Ball Valves for use with Sodium Hypochlorite SAMPLE SPECIFICATION All True Union DUO-BLOC 21 Ball Valves for use with Sodium Hypochlorite up to 20% concentration, sizes to 4, shall be either PVC or CPVC and of true union design with two-way blocking capability. All O-rings shall be FKM with Teflon seats. Teflon Seats shall have elastomeric backing cushion of the same material as the valve seals. Stem shall have double o-rings and be of blowoutproof design. The addition of a 1/8 vent hole drilled and deburred by the manufacturer is required. The valve shall be installed with the vent hole on the upstream side of the system to keep the cavity of the ball fluidized. The valve handle shall double as carrier removal and/or tightening tool. ISO mounting pad shall be integrally molded to valve body for actuation. PVC shall conform to ASTM D1784 Cell Classification 12454-A and CPVC shall conform to ASTM D1784 Cell Classification 23567-A. The ball valves, shall have a pressure rating of 230 psi for sizes to 3 and 150 psi for 4 at 70 degrees F. Duo-Bloc 21 Ball Valves must carry a two-year guarantee, as manufactured by Asahi/America Inc.

ASAHI/AMERICA

Type 14 Flanged Diaphragm Valve (1/2 thru 4) For Use With Sodium Hypochlorite SAMPLE SPECIFICATION All TYPE 14 flanged diaphragm valves for use with Sodium Hypochlorite up to 20% concentration shall be of solid thermoplastic construction (PVC or CPVC) for body and bonnet with molded flanged ends. The molded flanged ends prevent the loosening-up of cemented joints common in this type of service. The valves shall come standard with a position indicator, travel stop (to prevent over-tightening) and bonnet o-ring sealing arrangement. The valve shall be weir type with a square bonnet body sealing design and bayonet connection diaphragm (1/2 ~ 2) or round bonnet body sealing design and threaded stud diaphragm connection (2 ~ 4). All Teflon diaphragms shall accept the installation of a PVDF gas barrier between the layers of EPDM and Teflon. The PVDF gas barrier prevents against the migration of gas thru the Teflon membrane and attacking the EPDM backing cushion. All hardware shall be 304SS type and non-wetted. The face-to-face dimensions shall conform to TYPE G. PVC conforming to ASTM D1784 Cell Classification 12454-A, CPVC conforming to ASTM D1784 Cell Classification 23567-A and PVDF conforming to ASTM D3222 Cell Classification Type II. Valves shall be rated to 150 psi sizes thru 4 for Teflon diaphragms at 70 degrees F., as manufactured by Asahi/America, Inc.

ASAHI/AMERICA

Ball Foot Valves SAMPLE SPECIFICATION All ball Foot valves shall be of solid thermoplastic construction, have an external PVC screen and shall be designed with an elastomeric uniseat/seal for tight-shutoff under pressure. Sizes through 2 shall be of Tru-union design, while 3 & 4 shall be single union design. The same seal shall function as both the ball seat and the union seal. PVC shall conform to ASTM D1784 Cell Classification 12454-A. Ball Foot valves sizes 2 shall be rated 150 psi at 70 degrees F, 3 and 4 rated 100 psi at 70 degrees F, as manufactured by Asahi/America Inc.

ASAHI/AMERICA

FRP Giant Butterfly Valve SAMPLE SPECIFICATION All FRP (Fiber-Glass Reinforced Polyester) butterfly valves sizes 28 thru 60 shall be of the lined body design and bubble-tight seal (meeting or exceeding Class VI as defined by American National Standard Institute) with only the liner and disc as wetted parts. Gear operators shall be worm gear design, self locking with cast iron body and corrosion resistant powdercoat finish. The disc shall be of solid, abrasion-resistant FRP, have double o-ring seals on top and bottom trunnions of the same material as the valve liner. Liner shall be molded and formed around the body, functioning as gasket seals with convex ring design on each side of the valve for lower bolt tightening torque. Stem shall be of 403 stainless steel, non wetted and have engagement over the full length of the disc. All valves shall be rated to a maximum of 106 psi at 70 degrees F. Butterfly valves shall be wafer style, as manufactured by Asahi/America.

ASAHI/AMERICA

Sight Glass Gauge Valve SAMPLE SPECIFICATION All Sight Glass Gauge Valves shall be of thermoplastic construction (PVC or PP) and have no metal to media contact. PVC shall conform to ASTM D1784 cell classification 12454-A and PP shall conform to ASTM D4101 Cell Classification PP0210B67272. Valves shall be of compact design and shall eliminate the need for multiple valves and fittings. Valves shall incorporate a double O-ring union end design to allow easy maintenance of the glass, and a drain plug to permit sampling of fluid. All valves shall be rated to a maximum of 70 psi at 70 degrees F, as manufactured by Asahi/America, Inc.

ASAHI/AMERICA

Type 84 Omni Butterfly Valve SAMPLE SPECIFICATION All Type 84 Butterfly Valves shall be of thermoplastic construction (PVC) and have no metal to media contact. PVC shall conform to ASTM D1784 cell classification 12454-A. Valve stem shall have full engagement thru disc and be a non-wetted part. Seats shall be EPDM and operation shall be by Lever. All valves shall be rated for full vacuum service. All valves shall be rated to a maximum of 150 psi at 70 degrees F, as manufactured by Asahi/America, Inc.

ASAHI/AMERICA

Damper Style Butterfly Valve SAMPLE SPECIFICATION All Damper Style butterfly valves shall be of PVDF body and disc or PVC Body and PP disc both with low weepage rate. The stem shall be of Titanium and Vpacking of PTFE. PVDF shall conform to ASTM D3222 Cell Classification Type II, PVC conforming to ASTM D1784 cell classification 12454-A, and PP conforming to ASTM D4101 cell classification PP0210B67272. The operators shall be lever (1-1/2 thru 8) or gear (8 thru 24). The butterfly valves shall be wafer style, Valves shall be rated to 100 psi (1-1/2 3), 75 psi (4 6), 60 psi (8), 45 psi (10 16), and 30 psi (18 24) at 70 degrees F., as manufactured by Asahi/America.

ASAHI/AMERICA

Pressure Relief Valves SAMPLE SPECIFICATION All Pressure Relief Valves shall be of Thermoplastic construction, (PVC or PP) and have no metal part that comes in contact with media. PVC shall conform to ASTM D1784 Cell Classification 12454-A and PP conforming to ASTM D4101 Cell Classification PP0210B67272. PVC valves shall be rated to 110 psi sizes thru 2 and 75 psi sizes 2-1/2 thru 4, PP rated to 75 psi sizes thru 4 at 70 degrees F, as manufactured by Asahi/America, Inc

ASAHI/AMERICA

Globe Control Valves SAMPLE SPECIFICATION All Thermoplastic modulating control valves shall be of the Globe Valve design with interchangeable seats and plugs for various CVs. Flow characteristics shall be either Linear or Equal Percentage. Stem seal shall be Teflon bellows design. PVC conforming to ASTM D1784 Cell Classification 12454-A, PP conforming to ASTM D4101 Cell Classification PP0210B67272, and PVDF conforming to ASTM D3222 Cell Classification Type II., as manufactured by Asahi/America, Inc.

ASAHI/AMERICA

Constant Flow Valves SAMPLE SPECIFICATION All constant flow valves shall be of solid thermoplastic-flanged construction, and all wetted parts shall be of non-metallic materials. Sizes and shall be of inline design, while 1 - 4 shall be a Y type design. PVC shall conform to ASTM D1784 Cell Classification 12454-A, CPVC shall conform to ASTM D1784 Cell Classification 23567-A. Spring construction shall be 304 ss with ETFE coating. All constant flow valves shall have a calibrated flow dial and position indicator. Valve accuracy shall be +/- 6% of full scale. Constant flow valves sizes 3 shall have a maximum upstream pressure range of 150 psi at 120 degrees F. and Size 4 70 psi. at 120 degrees F. as manufactured by Asahi/America Inc.

ASAHI/AMERICA

Type 72 Diaphragm Valve (Molded Body) SAMPLE SPECIFICATION All TYPE 72 flanged diaphragm valves shall be of solid thermoplastic construction for body and bonnet with socket, threaded, or butt end connections. The valves shall come standard with a position indicator, travel stop (to prevent over-tightening) and bonnet o-ring sealing arrangement. The valve shall be weir type with a round or square bonnet body sealing design and threaded stud diaphragm connection. All Teflon diaphragms shall accept the installation of a PVDF gas barrier between the layers of EPDM and Teflon for aggressive chemical service. PVC conforming to ASTM D1784 cell classification 12454-A, CPVC conforming to ASTM D1784 Cell classification 23567-A, PP conforming to ASTM D4101 Cell Classification PP0110M20S21130, and PVDF conforming to ASTM D3222 Cell Classification Type II. PVC, CPVC, and PVDF valves shall be rated to 150 psi for elastomeric diaphragms at 70 degrees F., PVC, CPVC, and PVDF shall be rated to 150 psi sizes 1-1/2 and 120 psi size 2 for Teflon diaphragms at 70 degrees F., as manufactured by Asahi/America, Inc.

ASAHI/AMERICA

Series 92 for T-14 Diaphragm ValveSAMPLE SPECIFICATION All Series 92 Electric actuators for use with Type 14 diaphragm valves shall be 120 volt reversing type capacitor run motor design, thermally protected with a permanently lubricated gear train. Enclosure shall meet Nema 4X, 7 & 9. Actuator to have heat-treated solid metal gearing in a die cast aluminum housing and shall be Red powder coated with SS trim for corrosion resistance. All actuators to have beacon position indicator, manual override & ISO bolt pattern for valve mounting. Manual override is used for declutching motor for manual operation. 2 limit switches shall be supplied as a standard for setting open & close limits which shall be wired in series with a single 3-layer Multi-turn switch. Actuators to have two NPT conduit entry for on-off units and modulating units. Actuators shall be Series 92 Chief as manufactured by Asahi/America Inc.

ASAHI/AMERICA

Series 92 Electric ActuatorSAMPLE SPECIFICATION All Series 92 Electric actuators shall be reversing type capacitor run motor design (120 & 220 VAC), thermally protected with a permanently lubricated gear train. Enclosure shall meet Nema 4X, 7 & 9. Actuator to have heat-treated solid metal gearing in a die cast aluminum housing and shall be Red powder coated with SS trim for corrosion resistance. All actuators to have beacon position indicator, manual override & ISO bolt pattern for valve mounting. Manual override is used for declutching motor for manual operation. 2 limit switches shall be supplied as a standard for setting open & close limits. Actuators to have two NPT conduit entry for on-off units and modulating units. Actuators shall be Series 92 Chief as manufactured by Asahi/America Inc.

ASAHI/AMERICA

Series 94 Electric ActuatorSAMPLE SPECIFICATION All Series 94 Electric actuators shall be reversing type capacitor run motor design (120 & 220 VAC), thermally protected with a permanently lubricated gear train. Actuator to have heat-treated solid metal gearing self contained in motor assembly with Nema 4X enclosure constructed of Zytel FR50 engineered resin. All actuators to have position indicator, manual override & ISO bolt pattern for valve mounting. Manual override is used for declutching motor for manual operation. 2 limit switches shall be supplied as a standard for setting open & close limits. Actuators to have two NPT conduit entry for on-off units and modulating units. Actuators shall be Series 94 QuarterMaster as manufactured by Asahi/America Inc.

ASAHI/AMERICA

Series 83 Electric ActuatorSAMPLE SPECIFICATION All Series 83 Electric actuators shall be uni-directional motor design (120 & 220 VAC), with a permanently lubricated gear train. Actuator shall feature a single cam/coupling for activating limit switch and connecting to valve stem. Enclosure shall meet Nema 4X. Actuator to have heat-treated solid metal gearing self contained in motor assembly. Actuator to have a single conduit entry point for customer wiring. Actuators shall be Series 83 Electromni as manufactured by Asahi/America Inc.

ASAHI/AMERICA

Series 79P Pneumatic ActuatorSAMPLE SPECIFICATION All Series 79P Pneumatic actuators shall be double piston, double rack and single pinion design with body materials of Aluminum (Cataphoresis treated & Rilsan coated), 316 SS, or Glass-filled Polyamide. Shaft to be 300 SS with double O-ring sealing & machined flats for manual override. Actuators to have NPT air entry points and visual position indicator. Spring return models shall have concentric spring sets. All actuators to have ISO bolt pattern outdrive for valve mounting and Namur Top and front patterns for accessory & solenoid mounting. Actuators shall be Series 79P as manufactured by Asahi/America Inc.