ASAHI FIBER INDUSTRY CO., LTD.

MF-　FILTER is made from thermal bonded fiber of the polyolefin material without using any binder. The form is cylindrical shape and structure is rigid reticulation.

Mechanical strength is large, and it is excellent in chemicals resistance.

The porosity is high and the pressure drop is small.

By using thermal bonded polyester fiber, heatproof of it can be improved.

Applications Specifications

□ Filter for liquid

□ Filter for high pressure air

□ Filter for paints

□ Core filter media of activated carbon filter

□ Filter for softeners and purifiers

□ Pre-filter of pure water production

□ Pre-filter of ultra pure water production

□ Silencer

□ Diffuser tube

□ Inside diameter ： 5 mmΦ ～ 165 mmΦ

□ Outside diameter：7 mmΦ ～ 200 mmΦ

□ Thickness：1 mm ～ 30 mm

□ Length： 5 mm ～ 580 mm （It is possible to produce it up to 1,000mm according to the product.）

MF- FILTER is an asymmetric filtration layer, and it has the density gradient.

The pressure drop can be low for an asymmetric structure, and the filtrationvolume be greatly taken.

The filtration efficiency is good because asymmetric structure, and in addition , cake holding capacity increases.

MF- FILTER can be construction by rolling various nonwoven sheet or paperon the way in the filtration layer, the filter that gives the function can be done.

Applications Specifications

□ Filter for liquid 　

□ Filter for high pressure air

□ Filter for paints

□ Filter for softeners and purifiers

□ Pre-filter of ultra pure water process

□ Silencer

□ Oil mist separator

□ Inside diameter： 5 mmΦ ～ 165 mmΦ

□ Outside diameter：8 mmΦ ～ 200 mmΦ

□ Thickness：2 mm ～ 80 mm

□ Length：6 mm ～ 580 mm （It is possible to produce it up to 1,000 mm according to the product.）

2012.5

TEL + 81 587 32 1176 FAX + 81 587 23 0315

ASAHI FIBER INDUSTRY CO., LTD.51 Takashigehigashi-machi,Inazawa-city,Aichi-pref. 〒492-8424 Japan

URL

MF- FILTER is produced by a main raw material of the thermal bonded fiber of polyolefin material.

MF- FILTER is large mechanical strength, and is excellent in chemicals resistance.

Filtration Clarity can be arbitrarily selected by changing the fiber diameter or product porosity.

By wrapping the activated carbon fiber, the absorbent or the ion exchange fiber in the inner layer, the filter that gives the function can be done.

The increase of cake-holding capacity and the life time extension can be achieved by changing the grade of the fiber.

Applications Specifications□ Board filter

□ Pre-filter for softeners and purifiers

□ Filter for various absorbent fillings

□ Inlet filter

□ Finished goods made by nonwoven cloths

□ Parts for activated carbon filter

Board specifications

　・Length, width: 400 mm × 400 mm （max）

　・Thickness: 1 mm ～ 10 mm （Please consult with the loading material of the seat, the material of the inlet, the filling condition and the specifications.）

※Please consult inner, outer diameter

MMF FILTER Multi Functional Filter Elements

High quality filter which has high accuracy and long life (All-Japanese product)

MMF FILTER ｜Asymmetric Type｜

The Feature of MMF FILTER

feature 1 It is the latest filter element which is made by thermal bonded ultrafine

polypropylene fiber.

feature 2 Excellent chemical resistance since material is 100% polypropylene,

and it is applicable to use for wide range of liquid filtration

because of the extraction from filter element is very few.

feature 3 Flow rate is large with even low pressure since resistance for water

or air is small because filter element has continuous density gradient.

feature 4 We can produce conventional size of cartridge and also the required

size of filter as customer requested in reasonable price.

feature 5 It is the product 100% made in Japan from 100% Japanese polypropylene

material, so customer can rely on the quality.

Usage Industrial water, rinse

water, waste water

Abrasion liquid, cutting

fluid, paint

Acid, alkaline solution

Water of bath tub or

swimming pool

Chemicals

Food stuffs

Plating solution

Others

Specifications Inner diameter：

［1］28mmΦ ［2］60mmΦ

Outer diameter：

［1］48mmΦ〜120mmΦ

［2］80mmΦ〜120mmΦ

Thickness：

［1］10mm〜46mm

［2］10mm〜30mm

Length：125mm～1,500mm

Filtration clarity：1,5,10μm

(nominal)

※

ASAHI FIBER INDUSTRY CO.,LTD.

Chemical resistance could be influenced depends on liquid temperature, filtrationpressure and filtration time. We recommend to executed the test of chemicalresistance before actual use.

<Home page> http://www.asahi-fiber.co.jp

FAX: +81-587-23-0315TEL:+81-587-32-117651-Takashigehigashi-machi, Inazawa-shi, Aichi-ken, 492-8424 Japan

soybean oilkerosin100% Olive oilcopper sulfate plating liquidformalintoluene100% ethyl alcohol1% sodium hypochlorite

COMPATIBLITY

●10% sodium carbonate (Na2CO3)10% sodium hydroxide10% sulfuric acid10% nitric acid.10％ hydrochloric acid.

CHEMICALS

●●●●

●●●●●●●▲

0

2

4

6

8

10

12

0 5 10 15 20 25 30 35 40

Pressure drop(kPa)

Flow rate（L/min)

Inner diameter：60ｍｍΦ Ｌ＝250ｍｍ

８０Φ ｍｍ １００Φ ｍｍ １２０Φ ｍｍ

Outer diameter

FLOW RATE CHARACTERISTIC DIAGRAM

0

2

4

6

8

10

12

14

16

0 5 10 15 20 25 30 35 40

Pressure drop (kPa)

Flow rate （L/min）

Inner diameter：28ｍｍΦ Ｌ＝250ｍｍ

80Φ ｍｍ

100Φ ｍｍ

120Φ ｍｍ Outer diameter

RESISTANCE TO CHEMICALS

ASAHI FIBER INDUSTRY CO., LTD.

FIBER ROD is produced by the polyolefin fiber （SL type） or the polyester fiber （EL type）. By using only raw material without any binder.

Because the porosity of fiber rod can be arbitrarily selected, flow and retentively can be arbitrarily adjusted according to the characteristic of ink.

The FIBER ROD can be produced by mixing functional fibers of absorbent fiber and an anti-bacterial fiber, etc.

It is possible to correspond from a small lot to a large lot.

The binder is not used, and FIBER ROD is the one that the fiber and fiber were bonded of heat.

Applicatioins Specifications□ Inner occlusion parts for writing materials （Ink Reservoir）

□ Wick of air freshener and deodorant

□ Medium for water culture

□ Ink occlusion parts for office automation apparatus

□ Absorbent parts

□ Material for medical treatment

□ Pre-filter for softeners and purifiers

□ Filter media for high rate filtration

□ Diameter ： 2 mmΦ ～ 30 mmΦ

□ Length　 ： 2 mm ～ 300 mm

□ Porosity ： 50% ～ 90%

There is a lot of kinds of fiber rod

that the central portion is punctured.

2012.5

CELL ERASER is good for environment because it is made of the polylactic acid fiber that is made by biodegradability fiber.

The powder doesn't drop easily so that the powder wiped off by the CELL ERASER may enter it between the fiber and the fiber.

The CELL ERASER is a product that applies the technology that makes the fiber rod of ASAHI FIBER. Therefore, the operation wiped off stabilizing the surface of the whiteboard can be maintained.

The CELL ERASER wins the GOOD DESIGN AWARD in Japan.The feature graps it easily, and is easy-to-use products.

□ Four cells type

□ Two cells type （2 pieces attached for the exchange）

□ One Cell type with small magnet （1 peace attached for the exchange）

There are three kinds of each cell of color of blue, orange and green.

Design regis . No1197862

biodegradability cell

Specifications

elastomer

TEL + 81 587 32 1176 FAX + 81 587 23 0315

51 Takashigehigashi-machi,Inazawa-city,Aichi-pref. 〒492-8424 Japan

URL

ASAHI FIBER INDUSTRY CO., LTD.