AS4D37H -...
2
1020 Prince Frederick Blvd. Suite 305 • Prince Frederick, MD 20687 • Phone: (570) 420-7079 • Fax: (570) 420-7078 AS4D37H SD-AS4D37H- AL- Page 1 airlinelouvers.com 16.11 08-01-06 Nominal Deductions will be made to the opening size given. In the interest of product development, Airline Louvers reserves the right to make changes without notice. STANDARD MATERIALS AND CONSTRUCTION OPTIONS NOTES LOUVER SIZES Item # Qty Width Height Width Height Mullion Type Location Opening Size Louver Size Screens Union Made Arch. / Eng. : EDR: ECN: Job: Contractor: Project: Date: DWN: DWG: Min Panel Max Single Panel 12"W x 12"H 60”W x 96”H FRAME: Extruded aluminum, 6063-T6/T52 alloy. Available in .081” and .125” thickness (nominal). BLADE: Extruded aluminum, 6063-T6/T52 alloy. Available in .081” and .125” thickness (nominal). LOUVER FACE: Full width sill with head and blades contained within jambs BLADE CENTERS: Approximately 3½” SCREENS: (When indicated, in a removable frame) ½” flattened Aluminum (.051” thick) -or- ½” sq. Mesh, intermediate double-crimped aluminum wire, .063” dia. -or- ¹⁸⁄16 Mesh, .011” dia. aluminum wire, insect screen. FINISH: Mill Finish - Baked Enamel, Kynar, Anodize 1. "A" width and "B" height are opening dimensions. Louvers are provided ½" undersize. 1¼” (Typ.) “A” Louver Width (in.) 60” Max. Section Mullion (Typ.) Flange Frame (Available either face) 1⅜” Usable Flange Flange Frame Option 4” “B” Louver Height (in.) 1” (Typ.) Not to scale.
Transcript of AS4D37H -...
1020 Prince Frederick Blvd. Suite 305 • Prince Frederick, MD 20687 • Phone: (570) 420-7079 • Fax: (570) 420-7078
AS4D37H
SD-AS4D37H-
AL- Page 1airlinelouvers.com
16.11
08-01-06
Nominal Deductions will be made to the opening size given.In the interest of product development, Airline Louvers reserves the right to make changes without notice.
STANDARD MATERIALS AND CONSTRUCTION
OPTIONS
NOTES
LOUVER SIZES
Item # QtyWidth Height Width Height
MullionType Location
Opening Size Louver Size Screens Union MadeArch. / Eng. : EDR: ECN: Job:
Contractor: Project: Date: DWN: DWG:
Min Panel Max Single Panel
12"W x 12"H 60”W x 96”H
FRAME: Extruded aluminum, 6063-T6/T52 alloy. Available in .081” and .125” thickness (nominal). BLADE: Extruded aluminum, 6063-T6/T52 alloy. Available in .081” and .125” thickness (nominal). LOUVER FACE: Full width sill with head and blades contained within jambs BLADE CENTERS: Approximately 3½” SCREENS: (When indicated, in a removable frame) ½”flattenedAluminum(.051”thick) -or- ½” sq. Mesh, intermediate double-crimped aluminum wire, .063” dia. -or-¹⁸⁄16 Mesh, .011” dia. aluminum wire, insect screen. FINISH: Mill
Finish - Baked Enamel, Kynar, Anodize
1. "A" width and "B" height are opening dimensions. Louvers are provided ½" undersize.
1¼”(Typ.) “A”
Louver Width (in.)
60” Max. Section
Mullion (Typ.)
Flange Frame(Available either face)
1⅜”UsableFlange
Flange FrameOption
4”
“B” Louver Height
(in.)
1”(Typ.)
Not to scale.
SD-AS4D37H-
AL-1020 Prince Frederick Blvd. Suite 305 • Prince Frederick, MD 20687 • Phone: (570) 420-7079 • Fax: (570) 420-7078
AS4D37H
Page 2airlinelouvers.com
16.11
08-01-06
PERFORMANCE DATA Pressure Drop: .12 in. w.g. at 905 fpm Free Area: 9.09 sq.ft. = 57% for 48”W x 48”H sample tested in accordance with AMCA Standard 500-LBeginning point of Water Penetration: 868 fpm
Ratingsdonotincludeeffectsofabirdscreen.
900800 1000 11000
.02
.06
.04
.10
.08
.12
.16
.14
.20
.18
.22
.26
.24
.30
.28
Wat
er (o
z./ft
.²) F
ree
Area
- 15
Min
ute
Inte
rval
Velocity (fpm) thru Free Area
Water Penetration
868 (FPM) beginning of water penetration.
Pres
sure
Dro
p (in
. w.g
.)
Pressure Drop
Velocity (fpm) x 100 thru Free Area3 7 8 954 6 10 12 14 16 18 20
.03
.06
.07
.05
.04
.01
.10
.08
.09
.02
.50
.20
.30
.40
Intak
e
Intake air converted to standard air density.Tested to AMCA Standard 500-L, Figure 5.5.
Model AS4D37HTestUnitSize
48” x 48”
Model AS4D37HTestUnitSize
48” x 48”
AirlineLouverscertifiesthattheModelAS4D37H shown herein is licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with therequirementsoftheAMCACertifiedRatingsProgram.TheAMCACertifiedRatingsSeal applies to Water Penetration and Air Performance Ratings only.
Width (in.)
12" 18” 24” 30” 36” 42” 48” 54” 60”
Hei
ght (
in.)
12” .33 .53 .74 .95 1.16 1.36 1.57 1.77 1.98
24” .80 1.30 2.31 2.82 3.32 3.82 4.33 4.83 4.98
36” 1.26 2.05 2.84 3.64 4.43 5.23 6.02 6.81 7.61
48” 1.84 3.00 4.16 5.32 6.48 7.64 9.07 9.97 11.13
60” 2.25 3.68 5.10 6.52 7.95 9.37 10.79 12.21 13.64
72” 2.83 4.62 6.41 8.20 9.99 11.78 13.57 15.36 17.15
84” 3.29 5.37 7.45 9.53 11.61 13.69 15.77 17.85 19.93
96” 3.82 6.23 8.64 11.05 13.47 15.88 18.29 20.70 23.11
Free Area (sq. ft.)
