Artikelliste sensogan en
12
PRODUCT LIST 2013
description
www.sprenger.de
Transcript of Artikelliste sensogan en
PRODUCT LIST 2013
2
Compared to conventional bits, the double jointed KK ULTRAs have a middle link – also known as the bean – that is shortened and angled forward by 45°.
Product list 2013 | SENSOGAN®
article no./quality
size(mm)
size(inch)
thickness(mm)
ring-Ø(mm)
KK ULTRA rings: stainless steel
40605 ... 78 115 4.1/2 14 70125 5. 14 70135 5.1/4 14 70145 5.3/4 14 70155 6.1/8 14 70
rings: AURIGAN
40605 … 79 115 4.1/2 14 70125 5. 14 70135 5.1/4 14 70145 5.3/4 14 70155 6.1/8 14 70
rings: stainless steel
40604 … 78 125 5. 16 70135 5.1/4 16 70145 5.3/4 16 70155 6.1/8 16 70
rings: AURIGAN
40604 … 79 125 5. 16 70135 5.1/4 16 70145 5.3/4 16 70
rings: stainless steel
40606 … 78 120 4.3/4 18 70130 5.1/8 18 70140 5.1/2 18 70150 6. 18 70
rings: AURIGAN
40606 … 79 120 4.3/4 18 70130 5.1/8 18 70140 5.1/2 18 70150 6. 18 70
rings: stainless steel
40600 … 78 130 5.1/8 21 70140 5.1/2 21 70
rings: AURIGAN
40600 … 79 130 5.1/8 21 70140 5.1/2 21 70
3
FOR ALL BIT
RANGES!
Only with this innovative angle the middle link lies gently on the tongue resulting in even and constant contact to allow clear instructions through the reins.
KK ULTRA bits take advantage of the exceptional sensitivity of the horse‘s tongue, which multiplies the perceptions from signals given by the bit. When the reins are pulled, the middle part of the bit
fully rests on the tongue without squeezing, and the connection rings roll on the tongue. The tongue‘s sense of touch is utilised and clear instructions can be given.
The anatomically adapted mouthpiece is very comfortable for the horse as the rider can give softer instructions and the horse‘s suppleness is supported harmoniously.
article no./quality
size(mm)
size(inch)
thickness(mm)
ring-Ø(mm)
rings: stainless steel KK ULTRA bradoon40200 … 78 115 4.1/2 14 55
125 5. 14 55135 5.1/4 14 55145 5.3/4 14 55155 6.1/8 14 55
rings: AURIGAN
40200 … 79 115 4.1/2 14 55125 5. 14 55135 5.1/4 14 55145 5.3/4 14 55155 6.1/8 14 55
rings: stainless steel
40224 … 78 115 4.1/2 16 55
rings: AURIGAN
40224 … 79 115 4.1/2 16 55
KK ULTRA 2-TYPE
rings: stainless steel
40613 … 78 125 5. 16 70135 5.1/4 16 70145 5.3/4 16 70
SENSOGAN® | Product list 2013
4
Effective impulses for better communication between horse and riderDynamic RS bits stimulate the horse to accept the bit more easily. The ergonomically formed mouthpiece lies perfectly in the horse‘s mouth, resulting in soft and even pressure on the entire tongue area, encouraging the horse to chew. In addition, it supports the contact to the corners of the mouth in a very effective way, keeping the horse on the bit. Dynamic RS bits encourage the confi dence of the horse in the rider‘s hand and increase safety.
Ergonomically formed, gentle to the horse‘s mouth.
article no./quality
size(mm)
size(inch)
thickness(mm)
ring-Ø(mm)
Dynamic RS
single jointed / rings: stainless steel
40422 … 78 125 5. 16 70135 5.1/4 16 70145 5.3/4 16 70
Bradoonsingle jointed / rings: stainless steel
40215 … 78 130 5.1/8 14 55140 5.1/2 14 55
Dynamic RS
double jointed / rings: stainless steel
40424 … 78 125 5. 14 70135 5.1/4 14 70145 5.3/4 14 70
double jointed / rings: stainless steel
40426 … 78 125 5. 16 70135 5.1/4 16 70
145 5.3/4 16 70
Bradoondouble jointed / rings: stainless steel
40214 … 78 115 4.1/2 14 55125 5. 14 55
135 5.1/4 14 55145 5.3/4 14 55
Product list 2013 | SENSOGAN®
55
Gentle to mouth and tongueDynamic RS mouthpieces give even pressure on the entire tongue area. Due to the curved joints, the bit remains in the correct and central position on the tongue. The fi ne lozenge can direct gentle pressure pivotally onto the tongue.
Middle link angled forward by 45°Dynamic RS bits use the exceptional sensitivity of the horse‘s tongue, which multiplies the perceptions from signals given by the bit. When the reins are pulled, the middle part of the bit fully rests on the tongue without squeezing, and the connection rings roll on the tongue. The tongue‘s sense of touch is utilised and clear instructions can be given.
FOR ALL BIT
RANGES!
Dynamic RS
double jointed / rings: stainless steel
40424 … 78 125 5. 14 70135 5.1/4 14 70145 5.3/4 14 70
double jointed / rings: stainless steel
40426 … 78 125 5. 16 70135 5.1/4 16 70
145 5.3/4 16 70
Bradoondouble jointed / rings: stainless steel
40214 … 78 115 4.1/2 14 55125 5. 14 55
135 5.1/4 14 55145 5.3/4 14 55
article no./quality
size(mm)
size(inch)
thickness(mm)
ring-Ø(mm)
Dynamic RSsingle jointed / rings: stainless steel
40408 … 78 125 5. 16 65135 5.1/4 16 65145 5.3/4 16 65
Dynamic RSdouble jointed / rings: stainless steel
40414 … 78 115 4.1/2 14 65125 5. 14 65135 5.1/4 14 65145 5.3/4 14 65
40406 … 78 125 5. 16 65135 5.1/4 16 65145 5.3/4 16 65
Dynamic RS WH ULTRAdouble jointed / rings: stainless steel
40428 … 78 120 4.3/4 16 65130 5.1/8 16 65140 5.1/2 16 65
Dynamic RS Full Cheekdouble jointed / cheeks: stainless steel
41414 … 78 125 5. 16 50135 5.1/4 16 50145 5.3/4 16 50
SENSOGAN® | Product list 2013
6
A double jointed bit, angled forward by 45°, that features a unique roller in the centre section.
“This unique roller provides gentle stimulation to the tongue, which encourages the horse to chew, prompting salivation, allowing the acceptance of the bit and therefore the relaxation of the jaw. It has been Ernst Hoyos‘s and my experience that through this gentle stimulation our
horses learn more quickly to accept the bit softening their entire top-line enabling us to perform the movements with more relaxation, throughness and ultimately more harmony.”
Lisa Wilcox
article no./quality
size(mm)
size(inch)
thickness(mm)
ring-Ø(mm)
WH ULTRArings: stainless steel
40609 … 78 120 4.3/4 16 70130 5.1/8 16 70140 5.1/2 16 70150 6. 16 70
rings: stainless steel
40610 … 78 120 4.3/4 18 70130 5.1/8 18 70
140 5.1/2 18 70
Bradoonrings: stainless steel
40227 … 78 120 4.3/4 14 55130 5.1/8 14 55140 5.1/2 14 55
WH ULTRA softrings: stainless steel
40612 … 78 120 4.3/4 16 70130 5.1/8 16 70140 5.1/2 16 70
Product list 2013 | SENSOGAN®
7
TURNADO bits present a new generation of loose ring snaffl es by having the mouthpiece turned forward by 45°.
This special rotation is distinctly marked by a slightly abrasive surface in the middle part of the mouthpiece.
In contrast to conventional single jointed loose ring snaffl es, the rein aids reach the horse‘s mouth precisely, but in a soft way as the pressure is evenly distributed on the tongue. TURNADO bits enable perfect
communication with the horse, as prompt and ideal chewing activity is provided immediately. This bit also helps to prevent tongue vices.
FOR ALL BIT
RANGES!
article no./quality
size(mm)
size(inch)
thickness(mm)
ring-Ø(mm)
TURNADOrings: stainless steel
40587 …78 125 5. 16 70135 5.1/4 16 70145 5.3/4 16 70
rings: stainless steel
40588 …78 125 5. 18 70135 5.1/4 18 70145 5.3/4 18 70
TURNADO 2-TYPErings: stainless steel
40589 … 78 125 5. 16 70135 5.1/4 16 70145 5.3/4 16 70
SENSOGAN® | Product list 2013
8
article no./quality
size(mm)
size(inch)
thickness(mm)
ring-Ø(mm)
Bradoon rings: stainless steel
40212 … 78 120 4.3/4 12 55130 5.1/8 12 55140 5.1/2 12 55150 6. 12 55
rings: AURIGAN
40212 … 79 120 4.3/4 12 55130 5.1/8 12 55
140 5.1/2 12 55150 6. 12 55
rings: stainless steel
40231 … 78 120 4.3/4 16 70130 5.1/8 16 70140 5.1/2 16 70150 6. 16 70
rings: AURIGAN
40231 … 79 120 4.3/4 16 70130 5.1/8 16 70
140 5.1/2 16 70150 6. 16 70
rings: stainless steel
40552 … 78 125 5. 18 70135 5.1/4 18 70145 5.3/4 18 70
rings: AURIGAN
40552 … 79 125 5. 18 70135 5.1/4 18 70
145 5.3/4 18 70
rings: stainless steel
40652 … 78 125 5. 20 70135 5.1/4 20 70145 5.3/4 20 70
rings: AURIGAN
40652 … 79 125 5. 20 70135 5.1/4 20 70145 5.3/4 20 70
rings: stainless steel
40512 … 78 130 5.1/8 16 70140 5.1/2 16 70150 6. 16 70
rings: stainless steel
40511 … 78 125 5. 18 70135 5.1/4 18 70145 5.3/4 18 70
Product list 2013 | SENSOGAN®
LOOSE RING SNAFFLES
9SENSOGAN® | Product list 2013
MULLEN MOUTH AND JUMPING BITS
article no./quality
size(mm)
size(inch)
thickness(mm)
ring-Ø(mm)
Flex Control
rings: stainless steel
40530 … 78 125 5. 18 70135 5.1/4 18 70145 5.3/4 18 70
KK Correction bit
rings: stainless steel
40502 … 78 120 4.3/4 18 70130 5.1/8 18 70140 5.1/2 18 70
CM Mullen Mouth snaffl e
rings: stainless steel
40583 … 78 110 4.1/4 16 70120 4.3/4 16 70130 5.1/8 16 70140 5.1/2 16 70
KK Universal bit
rings: stainless steel
40510 … 78 125 5. 18 70135 5.1/4 18 70145 5.3/4 18 70
FOR ALL BIT
RANGES!
10
Bemelmans Weymouth
cheeks: stainless steel
42120 … 78 115 4.1/2 16 5125 5. 16 5135 5.1/4 16 5145 5.3/4 16 5
42220 … 78 125 5. 16 7135 5.1/4 16 7145 5.3/4 16 7
Special Dressage bit
cheeks: stainless steel
42262 … 78 125 5. 16 7135 5.1/4 16 7145 5.3/4 16 7
cheeks: AURIGAN
42262 … 79 125 5. 16 7135 5.1/4 16 7145 5.3/4 16 7
Product list 2013 | SENSOGAN®
WEYMOUTH BITS
article no./quality
size(mm)
size(inch)
thickness(mm)
lower cheeks(cm)
HO-Weymouth
cheeks: stainless steel
42173 … 78 125 5. 14 5135 5.1/4 14 5145 5.3/4 14 5
42273 … 78 125 5. 14 7135 5.1/4 14 7145 5.3/4 14 7
42174 … 78 125 5. 16 5135 5.1/4 16 5145 5.3/4 16 5
42274 … 78 125 5. 16 7135 5.1/4 16 7145 5.3/4 16 7
11
article no./quality
size(mm)
size(inch)
thickness(mm)
lower cheeks(cm)
Weymouth “FC“
cheeks: stainless steel
42261 … 78 125 5. 18 7135 5.1/4 18 7145 5.3/4 18 7
KK Dressage bit
cheeks: stainless steel
42281 … 78 120 4.3/4 18 7130 5.1/8 18 7140 5.1/2 18 7
cheeks: AURIGAN
42281 … 79 120 4.3/4 18 7130 5.1/8 18 7140 5.1/2 18 7
SENSOGAN® | Product list 2013
HS Weymouth
cheeks: stainless steel
42178 … 78 125 5. 16 5135 5.1/4 16 5145 5.3/4 16 5
42278 … 78 125 5. 16 7135 5.1/4 16 7145 5.3/4 16 7
cheeks: AURIGAN42257 … 79 125 5. 18 5
135 5.1/4 18 5
42267 … 79 125 5. 18 7135 5.1/4 18 7
FOR ALL BIT
RANGES!
Herm. Sprenger GmbH Metallwarenfabrik
P.O. Box 245358634 Iserlohn – Germany
Phone +49 (0) 23 71 95 59-0Facsimile +49 (0) 23 71 95 59-60
