ARTICULATED ARM TAPPING MACHINES Tapping Machine.pdf · ARTICULATED ARM TAPPING MACHINES PNEUMATIC...

ARTICULATED ARM TAPPING MACHINESARTICULATED ARM TAPPING MACHINES

PNEUMATIC &PNEUMATIC &ELECTRIC ELECTRIC MODELSMODELS

TOSS Technologies - Gat No. 44, H. No. 615, Indrayani Niwas, Vitthal NagarChimbali, Taluka Khed, Dist. Pune - 410501. Maharashtra. India.

cell : +91 932 538 4767 E-mail : [email protected] Web : www.toss-tech.com

DESCRIPTIONDESCRIPTION

•• TheThe tappingtapping arm,arm, ROSCAMAT,ROSCAMAT, consistsconsists ofof aa pendularpendular parallelogramparallelogramthatthat isis balancedbalanced byby aa pneumaticpneumatic spring,spring, plusplus aa radialradial armarm.. TheThe gasgasspringspring andand radialradial armarm assemblyassembly fixesfixes thethe motormotor headhead andand keepskeeps ititperpendicularperpendicular toto thethe workingworking areaarea..

•• MotorsMotors areare equippedequipped withwith aa quickquick--changechange systemsystem andand isis rotatedrotated byby•• MotorsMotors areare equippedequipped withwith aa quickquick--changechange systemsystem andand isis rotatedrotated bybycompressedcompressed airair thatthat hashas previouslypreviously beenbeen filteredfiltered andand lubricatedlubricated byby aaunitunit forfor thatthat purposepurpose ((PneumaticPneumatic modelsmodels )) oror byby aa HighHigh FrequencyFrequencymotormotor regulatedregulated byby meansmeans aa variatorvariator boardboard ((ElectricElectric modelsmodels ))..

•• ThereThere areare differentdifferent models,models, allall ofof themthem adaptedadapted withwith quickquick changechangesystemsystem toto thethe modules,modules, tapholderstapholders,, tapstaps andand shankshank toolingtooling soso thatthatwewe getget anan importantimportant timetime savingsaving andand productivityproductivity growthgrowth inin tappingtappingoperationsoperations..

APPLICATIONSAPPLICATIONS

Which kind of industries need Which kind of industries need RoscamaRoscama tt??

•• MouldsMoulds•• DiesDies•• Car industryCar industry•• Auxiliary in CNC machinesAuxiliary in CNC machines•• Plate industryPlate industry•• Mechanization industry,…Mechanization industry,…•• Mechanization industry,…Mechanization industry,…

Other operations:Other operations:

•• Drill (soft materials: Aluminium, foundry, wood, etc.)Drill (soft materials: Aluminium, foundry, wood, etc.)•• Countersink holeCountersink hole•• Screwing, riveting, etc.Screwing, riveting, etc.•• HelicoilsHelicoils inserts.inserts.•• Load balance,Load balance, weightless arms. (3ARM weightless arms. (3ARM www.3arm.netwww.3arm.net ))

DESIGN: - Pioneers on monoarm tapping machine providing high rigidity.

- Special attention to all finished parts, shape, edges and colours.

- Hidden cables: no parts which can get hooked up.

VIBRATIONS:

because of the structure monoarm, rigidity and requirements of minimum tolerances at

production, we have eliminate any vibration caused by the arm.

POWER: powerful motor, pneumatic or electric

TOUGH: Any component largely dimensioned over its normal estimated value.

-Strong arm section with different thickness at both sides.

WHY ROSCAMAT?

-Strong arm section with different thickness at both sides.

LIGHT & FLEXIBLE: Manufactured in aluminium, easy to set up and move to any

working point of the plant.

Particular ergonomy and sensitivity so that it is possible to tap M2 without difficulty

Other possible operations with the machine: reaming, countersinking, screwing, helicoil insert.

The quality and use of first worldwide known trademarks on the machine components (SMC,

FESTO, INA-FAG-SKF, NTK, tolerances, grinded gears, precision required, surface treatments,)

guarantee the big differences among our competitors’.

Because after 26 years designing and manufacturing tapping arm machines, we have

manufactured more than 17500 machines which are working into the five continents. Our

customers keep everyday working with our reliable machines.

PNEUMATIC MODELSPNEUMATIC MODELS

Roscamat-400

Roscamat-200

Roscamat-500

Roscamat-400

Roscamat-500 RH

(revolving head)


ROSCAMATROSCAMAT--200200•• 2 motor options:2 motor options:

TS VII 350 rpm, tapping capacity: M2TS VII 350 rpm, tapping capacity: M2--M14 M14 / / # 0# 0-- 9/169/16TS VII 750 rpm, tapping capacity: M2TS VII 750 rpm, tapping capacity: M2--M10 M10 / / # 0# 0-- 3/8”3/8”

1 SPEED 1 SPEED (Without modular system, fixation direct to (Without modular system, fixation direct to tap holders tap holders -- chuckschucks))

Working area: radius: 935 mm. Working area: radius: 935 mm. / / 37” 37” High: 660 mm. High: 660 mm. / / 26”26”Optional: Optional: OrientableOrientable head member VH (Verticalhead member VH (Vertical--horizontal)horizontal)

•• Technical datesTechnical dates

MotorMotorSpeed Speed

(rpm)(rpm)

Max. Max.

Torque Torque

NmNm

Ø Coupling Ø Coupling

DiameterDiameter

Max. ThreadMax. Thread

AluminiumAluminium


Steel<100 KgSteel<100 Kg

202A0102202A0102 350350 3636 19/119/1 M16 M16 -- 5/8”5/8” M14 M14 –– 9/16”9/16”

202B0102202B0102 750750 1717 19/119/1 M12 M12 –– 1/2”1/2” M10 M10 –– 3/8”3/8”

PNEUMATIC MODELSPNEUMATIC MODELSROSCAMATROSCAMAT--400 & ROSCAMAT400 & ROSCAMAT--500500Capacity: M2Capacity: M2--M24 / M24 / # 0 # 0 –– 7/8” 7/8” (steel < 80 Kg.)(steel < 80 Kg.)Pneumatic motor TSPneumatic motor TS--VIII, 730 W.VIII, 730 W.Modular system, 6 tapping speedsModular system, 6 tapping speeds

1 drilling speed1 drilling speedDifference:Difference:•• Working area: Working area:

ROSCAMATROSCAMAT--400400 , radius, radius =1100 mm. / =1100 mm. / 43”43”high = 680 mm. / high = 680 mm. / 27”27”high = 680 mm. / high = 680 mm. / 27”27”

ROSCAMATROSCAMAT--500500 , radius = 2120 mm. / , radius = 2120 mm. / 83”83”high = 1100 mm. / high = 1100 mm. / 44”44”

Options:Options:•• OrientableOrientable head member:head member: ROSCAMATROSCAMAT--400 VH400 VH

ROSCAMATROSCAMAT--500 VH500 VHwith 4 positions to 90º (verticalwith 4 positions to 90º (vertical--horizontal)horizontal)

•• Tool lubrication equipment (L)Tool lubrication equipment (L)* * Both models can mount Both models can mount orientableorientable head member and tool head member and tool

lubrication equipment (L) lubrication equipment (L)


ROSCAMATROSCAMAT--500 RH (500 RH (revolving headrevolving head))

-- Capacity: M2Capacity: M2--M24 / M24 / # 0 # 0 –– 7/8”7/8” (steel < 80 Kg.)(steel < 80 Kg.)-- Pneumatic motor TS VIII, 730 W.Pneumatic motor TS VIII, 730 W.-- Modular system, 6 tapping speedModular system, 6 tapping speed

1 drilling speed1 drilling speed-- Working area: radius =Working area: radius = 2180 mm. / 2180 mm. / 83”83”

high = 1110 mm. / high = 1110 mm. / 44”44”

-- MultipositionMultiposition headmemberheadmember : : -- MultipositionMultiposition headmemberheadmember : : ●● Tapping in any positionTapping in any position..●● Keep it perpendicular to the working area.Keep it perpendicular to the working area.

Options:Options:•• Tool lubrication equipment (L)Tool lubrication equipment (L)

Modular System Modular System –– Pneumatic modelsPneumatic models•• The modular system consisting in a series of 7 The modular system consisting in a series of 7

quickquick--change modules (reducers) is provided for change modules (reducers) is provided for coupling the motor giving 7 different speeds.coupling the motor giving 7 different speeds.

•• Only models Only models RoscamatRoscamat Series 400 and Series 500Series 400 and Series 500((RoscamatRoscamat 200: does not use modular system200: does not use modular system ))

ModuleModule

Max. Max.

Speed Speed

(rpm)(rpm)

Max. Max.

Torque Torque

(Nm)(Nm)

Ø Ø CouplCoupl. .

(mm)(mm)


AluminiumAluminium


Steel<90 Steel<90 kgkg


Steel>90 Steel>90 kgkg

9090 9090 150150 3131 M16M16--M27 / M27 / 5/8”5/8”--1”1” M16M16--M24 / M24 / 5/8”5/8”--15/16”15/16” M22 M22 / 7/8”/ 7/8”

170170 170170 7979 3131 M16M16--M22 / M22 / 5/8”5/8”––7/8”7/8” M16M16--M18 M18 / 5/8”/ 5/8”--3/4”3/4” M16 M16 / 5/8”/ 5/8”

300300 300300 4444 1919 M2M2--M16 / M16 / #0#0––5/8”5/8” M2M2--M16 / M16 / #0#0--5/8”5/8” M14 / M14 / 9/16”9/16”

550550 550550 2424 1919 M2M2--M14 /M14 / #0#0––9/16”9/16” M2M2--M12 / M12 / #0#0--1/2”1/2” M10 / 3/8”M10 / 3/8”

750750 750750 1717 1919 M2M2--M12 M12 / #0/ #0––1/2”1/2” M2M2--M10 M10 / #0/ #0--3/8”3/8” M8 / M8 / 5/16”5/16”

1.0501.050 1.0501.050 12,512,5 1919 M2M2--M8 / M8 / #0#0––5/16”5/16” M2M2--M8 / M8 / #0#0--5/16”5/16” M6 / M6 / 1/4”1/4”

2.1002.100 2.1002.100 66Cone Cone

B16B16To drill up to Ø8 mm / To drill up to Ø8 mm / 5/16”5/16” (aluminium, foundry)(aluminium, foundry)


ROSCAMAT 500 VH ROSCAMAT 500 VH vsvs ROSCAMAT 500 RHROSCAMAT 500 RH

•• BothBoth machinesmachines havehave thethe samesame tappingtapping capacitycapacity andand workingworking area,area, MM22 toto MM2424..

•• TheThe orientableo rientable headmemberheadmember VHVH onlyonly cancan onlyonly bebe settledsettled inin verticalvertical and/orand/orhorizontalhorizontal positionposition..TheThe operatoroperator mustmust balancebalance byby handhand thethe archarch describeddescribed byby thethe machinemachine duringduringtappingtapping operationsoperations..tappingtapping operationsoperations..

•• TheThe ROSCAMATROSCAMAT--500500 RHRH cancan bebe settledsettled inin anyany angleangle andand keepkeep thetheperpendicularityperpendicularity withwith thethe workingworking planeplane..ItIt isis providedprovided withwith anan internalinternal mechanismmechanism toto compensatecompensate thethe archarch describeddescribedbyby thethe machinemachine whenwhen tappingtapping..

ELECTRIC MODELSELECTRIC MODELS 110V

or

220V

ELECTRIC MODELSELECTRIC MODELS

•• 2 motor options with 1 speed2 motor options with 1 speed: : TS VII 300 rpm, TS VII 300 rpm, tapping capacity: M2tapping capacity: M2--M14 / M14 / #0#0--9/16”9 /16”TS VII 600 rpm, TS VII 600 rpm, tapping capacity: M2tapping capacity: M2--M10 / M10 / #0#0--3/8”3 /8”

•• 1 motor with 2 speeds (300 and 600 rpm)1 motor with 2 speeds (300 and 600 rpm)((WITHOUT Modular system, WITHOUT Modular system, fixation direct to tap hold ers-chucks )Working area: Radius: 767 mm / Working area: Radius: 767 mm / 30”30”

High: 396 + 120 mm. / High: 396 + 120 mm. / 20.28”20.28”

MotorMotorSpeed Speed

(rpm)(rpm)

Max. Max.

Torque Torque

(Nm.)(Nm.)

Ø Ø

Coupling. Coupling.

(mm.)(mm.)

Max. Thread Max. Thread

AluminumAluminumMax. Thread Steel<100 KgMax. Thread Steel<100 Kg

AF220301AF220301 300300 3636 1919 M16 / M16 / 5/8”5/8” M14 / M14 / 9/16”9/16”

AF220201AF220201 600600 1717 1919 M12 / M12 / 1/2”1/2” M10 / M10 / 3/8”3/8”

AF220101AF220101 300 & 600300 & 600 3636 1919 M16 / M16 / 5/8”5/8” M14 / M14 / 9/16”9/16”

High: 396 + 120 mm. / High: 396 + 120 mm. / 20.28”20.28”

Optional: * Optional: * orientableorientable head head -- VH VH * * Tool lubrication with timer


•• Tapping capacity: Tapping capacity: M2M2--M27 (M33) / M27 (M33) / #0 #0 –– 1 1/81 1/8•• High frequency motorHigh frequency motor•• Keep the torqueKeep the torque•• Maximum torque (module 90)=150 NmMaximum torque (module 90)=150 Nm•• Working area: radius Working area: radius ��1020 mm. / 40”1020 mm. / 40”•• Working area: radius Working area: radius ��1020 mm. / 40”1020 mm. / 40”

highhigh�� 535 mm. / 21”535 mm. / 21”•• Modular system: 1 MotorModular system: 1 Motor��5 speeds5 speeds

•• Equipped withEquipped with::-- Electronic speed Electronic speed variatorvariator-- Right and leftRight and left--hand rotation controlhand rotation control

•• OptionalOptional::-- Tool lubrication with timerTool lubrication with timer-- Depth controlDepth control

ELECTRONIC MODELSELECTRONIC MODELS

-- VHVH

IsIs suppliedsupplied withwith anan articulatedarticulated ofof easyeasy handlinghandling whichwhichallowsallows usus toto locatelocate thethe motormotor inin verticalvertical oror horizontalhorizontalpositionposition..

WORKING AREA:Radius: 1160 mm. / 45”High: 535 mm. / 21”

positionposition..

Modular System

ROSCAMAT -

ModuleModule

Max. Max.

Speed Speed

(rpm)(rpm)

Max. Max.

Torque Torque

(Nm)(Nm)

Ø Ø CouplCoupl. .

(mm)(mm)


AluminiumAluminium


Steel<90 Steel<90 kgkg


Steel>90 Steel>90 kgkg

9090 9090 150150 3131 M16M16--M27 / M27 / 5/8”5/8”--1”1” M16M16--M24 / M24 / 5/8”5/8”--15/16”15/16” M22 M22 / 7/8”/ 7/8”

170170 170170 7979 3131 M16M16--M22 / M22 / 5/8”5/8”––7/8”7/8” M16M16--M18 M18 / 5/8”/ 5/8”--3/4”3/4” M16 M16 / 5/8”/ 5/8”

300300 300300 4444 1919 M2M2--M16 / M16 / #0#0––5/8”5/8” M2M2--M16 / M16 / #0#0--5/8”5/8” M14 / M14 / 9/16”9/16”

550550 550550 2424 1919 M2M2--M14 /M14 / #0#0––9/16”9/16” M2M2--M12 / M12 / #0#0--1/2”1/2” M10 / 3/8”M10 / 3/8”

750750 750750 1717 1919 M2M2--M12 M12 / #0/ #0––1/2”1/2” M2M2--M10 M10 / #0/ #0--3/8”3/8” M8 / M8 / 5/16”5/16”

1.0501.050 1.0501.050 12,512,5 1919 M2M2--M8 / M8 / #0#0––5/16”5/16” M2M2--M8 / M8 / #0#0--5/16”5/16” M6 / M6 / 1/4”1/4”

2.1002.100 2.1002.100 66Cone Cone

B16B16To drill up to Ø8 mm / To drill up to Ø8 mm / 5/16”5/16” (aluminium, foundry)(aluminium, foundry)


•• Tapping capacity: Tapping capacity: M3M3--M36 (M42) M36 (M42) / / #0#0--1 3/8”1 3/8”•• High Frequency MotorHigh Frequency Motor•• Keep the torqueKeep the torque•• Maximum torque (module 40)=340 NmMaximum torque (module 40)=340 Nm•• Maximum torque (module 40)=340 NmMaximum torque (module 40)=340 Nm•• Working area: radius Working area: radius ��1215 mm. / 48”1215 mm. / 48”

HighHigh�� 810 mm. / 32”810 mm. / 32”•• Modular system: 1 MotorModular system: 1 Motor��6 speeds6 speeds

• Equipped with:- Tool lubrication with timer- Depth control (mm.)

ELECTRONIC MODELSELECTRONIC MODELS

•• -- VHVH

•• OrientableOrientable headmemberheadmember verticalvertical--horizontalhorizontal

-- Maximum thread in vertical position: M36(M42) Maximum thread in vertical position: M36(M42) / / 1.3/8” (1.5/8”)1.3/8” (1.5/8”)

-- Maximum thread in horizontal position: M27 / Maximum thread in horizontal position: M27 / 1”1”

**Attention: Attention: -- Module 40 cannot be used inModule 40 cannot be used in horizontal horizontal

operations)operations)

ModuleModule

Max. Max.

Speed Speed

(rpm)(rpm)

Max. Max.

Torque Torque

(rpm)(rpm)

Coupling Coupling

diameter diameter

(mm.)/size(mm.)/size

Max. threadMax. thread

AluminiumAluminium


steel<90 Kg.steel<90 Kg.


steel>90 Kg.steel>90 Kg.

Modular System

ROSCAMATROSCAMAT--

(rpm)(rpm) (rpm)(rpm) (mm.)/size(mm.)/sizeAluminiumAluminium steel<90 Kg.steel<90 Kg. steel>90 Kg.steel>90 Kg.

4040 4040 340340 48 /348 /3 M42 / M42 / 1.5/8”1.5/8” M36 / M36 / 1.3/8”1.3/8” M33 / M33 / 1.1/4”1.1/4”

7575 7575 185185 31 /231 /2 M33 / M33 / 1.1/4”1.1/4” M27 / M27 / 1”1” M27 / M27 / 1”1”

140140 140140 9595 31 /231 /2 M27 / M27 / 1”1” M22 / M22 / 7/8”7/8” M22 M22 / / 7/8”7/8”

320320 310310 4444 19/119/1 M20 / M20 / 13/16”13/16” M16 / M16 / 5/8”5/8” M16 /M16 /5/8”5/8”

500500 480480 2828 19/119/1 M16 / M16 / 5/8”5/8” M12 / M12 / 1/2”1/2” M12 / M12 / 1/2”1/2”

900900 900900 1515 19/119/1 M10 / M10 / 3/8”3/8” M8 / M8 / 5/16”5/16” M6 / M6 / 1/4”1/4”

SETTING IN OPERATIONSETTING IN OPERATION

•• Minimum points for an optimum operationMinimum points for an optimum operation

Pneumatic machinesPneumatic machines

Supply pressureSupply pressure 6 6 -- 8 bar for full power8 bar for full power

Compressor powerCompressor power 5,5 Hp5,5 Hp

Minimum inside Minimum inside Ø Ø diameter diameter 12 12 mm / mm / 1/2”1/2”

Electric machinesElectric machines

Supply powerSupply power SINGLE phase socket (220 V or 110 V

supply) with ground wire

500x500x900500x500x90019 11/16”x19 11/16”x35 7/16”19 11/16”x19 11/16”x35 7/16”

700x700x850700x700x85027 9/16”x27 9/16”x33 27 9/16”x27 9/16”x33

7/167/16””

850x850x850850x850x85033 7/16”x33 33 7/16”x33

7/16”x33 7/16”7/16”x33 7/16”

1150x850x8501150x850x85043 5/16”x33 7/16”x33 43 5/16”x33 7/16”x33

7/16”7/16”

RR--200200 ●● ●● ●● ●●

ACCESSORIESACCESSORIES--TABLESTABLES

Provided with 4 wheels, notches for attaching the work pieces or tools, supports

for tapholders, and lockable drawer (1150x850)

RR--200200 ●● ●● ●● ●●

RR--400400 ●● ●● ●●

RR--500500 ●● ●●

RR--MosquitoMosquito ●● ●● ●● ●●

RR--TIGERTIGER ●● ●●

RR--SHARK SHARK ●● ●●

Max. Weight Max. Weight on table on table 75 Kg.75 Kg. 150 Kg.150 Kg. 200 200 KgKg 500 Kg.500 Kg.

ACCESSORIES ACCESSORIES -- TOOLINGTOOLING

TapholderTapholder with/without clutchwith/without clutchSmall clampSmall clamp Big clampBig clamp

Magnetic Magnetic supportsupportØ19 mmØ19 mm Ø31 mmØ31 mm Ø48 mmØ48 mm

RR--200200 ●● ●● ●● ●●

RR--400400 ●● ●● ●● ●● ●●

RR--500500 ●● ●● ●● ●●

Helicoils


RR--TIGERTIGER ●● ●● ●● ●● ●●

RR--SHARK SHARK ●● ●● ●● ●● ●●

Threading Threading die holderdie holderCapacity Capacity range: M5range: M5--M20M20

Long Long threading threading die holderdie holderCapacity Capacity range: range: M6M6--M12M12

Quick change Quick change extensionextensionLength = 80 mmLength = 80 mmØ Coupling =19 mmØ Coupling =19 mm

Reducing cupReducing cupØ48 Ø48 �� Ø31Ø31Ø48 Ø48 �� Ø19Ø19Ø31 Ø31 �� Ø19Ø19

ACCESSORIESACCESSORIES-- SUPPORTSSUPPORTS

ColumnColumn350x350x750 mm.350x350x750 mm.

Trolley with columnTrolley with column700x700x940 mm.700x700x940 mm.

LifterLifter

Pneumatic 550 mm.Pneumatic 550 mm. Mechanic 500 mm.Mechanic 500 mm.

The lifter can be mounted onto the column, trolley or onto a table.

13 3/4”x13 3/4x29 1/2”13 3/4”x13 3/4x29 1/2” 27 ½”x27 ½”x37”27 ½”x27 ½”x37” 19 ½”19 ½” 21 ½”21 ½”

RR--200200 ●● ●● ●● ●●

RR--400400 ●● ●● ●● ●●

RR--500500 ●● ●● ●●


RR--TIGERTIGER ●● ●● ●●

RR--SHARK SHARK ●● ●● ●●

ForFor fixingfixing thethe machinemachineonon thethe floorfloor byby meansmeansofof 44 metallicmetallic dowelsdowels

For moving the For moving the working unit. working unit.

ItIt consistsconsists ofof aa collapsiblecollapsible columncolumn andand aatorsiontorsion (vertical(vertical cylinder)cylinder)

Comparative Comparative

ROSCAMATROSCAMAT -- OthersOthers

ROSCAMATROSCAMAT--400 / ROSCAMAT400 / ROSCAMAT--500500

• • 2 Speeds, 4002 Speeds, 400--100 rpm 100 rpm • 6 Speeds, 1 motor: 90,170,300,550,750,1050 rpm• 6 Speeds, 1 motor: 90,170,300,550,750,1050 rpm

• Tapping Capacity: M3• Tapping Capacity: M3--M20 (M24)M20 (M24) • Tapping capacity: M2• Tapping capacity: M2--M24 (M27)M24 (M27)

• Tap holder size 2 (+ reducing cup from 31/2 to 19/1) • Tap holder size 2 (+ reducing cup from 31/2 to 19/1) • Tap holder size 1 and 2 • Tap holder size 1 and 2

• Weight= 26 Kg.• Weight= 26 Kg. • Weight: 18 Kg.• Weight: 18 Kg.

• Design: Sticks, low stability and strength • Design: Sticks, low stability and strength • Mono arm design: high stability and strength• Mono arm design: high stability and strength

• High level of noise• High level of noise • Low level of noise: Motor made by ourselves • Low level of noise: Motor made by ourselves

• • No balanced (dampers of low sensitivity)No balanced (dampers of low sensitivity) • High sensitivity of the arm in any position• High sensitivity of the arm in any position

• • Outside cablesOutside cables • Cables inside• Cables inside

• Steel framework • Steel framework • Aluminum framework, big thickness in the cross • Aluminum framework, big thickness in the cross sectionsection



• • 2 Speeds, 1502 Speeds, 150--500 rpm500 rpm

• Tapping capacity: M3• Tapping capacity: M3--M24M24

• Tap holder size 2 (+ reducing cup from 31/2 to 19/1)• Tap holder size 2 (+ reducing cup from 31/2 to 19/1)

• Weight: 30 kg.• Weight: 30 kg.

• Electronic equipment outside• Electronic equipment outside

• Design: Sticks, low stability and strength• Design: Sticks, low stability and strength

• No balanced (dampers of low sensitivity) • No balanced (dampers of low sensitivity)

• Outside cables• Outside cables

• Steel framework• Steel framework

• Automatic tool lubrication with compressed air• Automatic tool lubrication with compressed air

ROSCAMATROSCAMAT--TIGERTIGER

• • 6 Speeds, 90,170,300,550,750,1050 rpm 6 Speeds, 90,170,300,550,750,1050 rpm

• Tapping capacity: M2• Tapping capacity: M2--M27 Al: M33M27 Al: M33

• All type of chucks: size 1, 2 and 3• All type of chucks: size 1, 2 and 3

• Weight = 23 Kg.• Weight = 23 Kg.

• Electronic equipment built in the arm• Electronic equipment built in the arm

• Mono arm design: high stability and strength• Mono arm design: high stability and strength

• High sensitivity of the arm in any position• High sensitivity of the arm in any position

• Cables inside the arm• Cables inside the arm

• Aluminum framework• Aluminum framework

• Automatic tool lubrication with electric pump• Automatic tool lubrication with electric pump



• • 2 Speeds, (375 max. Rpm)2 Speeds, (375 max. Rpm)

• Tapping capacity: M4• Tapping capacity: M4--M30M30

• Only size 2 tap holder• Only size 2 tap holder--chuck (+ reducing cup from chuck (+ reducing cup from 13/2 to 19/1)13/2 to 19/1)

• Weight: 170 Kg., Hydraulic equipment located in table • Weight: 170 Kg., Hydraulic equipment located in table or outside.or outside.

• Design: Sticks, low stability and strength• Design: Sticks, low stability and strength

• Motor power: 3• Motor power: 3--4 Kw (high consumption)4 Kw (high consumption)

• Dampers of low sensitivity• Dampers of low sensitivity

• • Awkwardly movementAwkwardly movement

• Steel framework• Steel framework

• Automatic tool lubrication with compressed air• Automatic tool lubrication with compressed air

ROSCAMATROSCAMAT--SHARK SHARK

• • 6 speeds, 406 speeds, 40--900 rpm900 rpm

• Tapping capacity: M3• Tapping capacity: M3--M36, Al: (M39) M36, Al: (M39)

• All type of • All type of tapholderstapholders: Size 1, 2 and 3: Size 1, 2 and 3

• Weight: 43 Kg.• Weight: 43 Kg.

• Mono arm design: High stability and strength• Mono arm design: High stability and strength

• Motor power: 2 • Motor power: 2 KwKw..

• Dampers of high sensitivity• Dampers of high sensitivity

• Light and flexible movement• Light and flexible movement

• Aluminum framework• Aluminum framework

• Automatic tool lubrication with electric pump• Automatic tool lubrication with electric pump

• Depth control, etc…• Depth control, etc…

ARTICULATED ARM TAPPING MACHINES Tapping Machine.pdf · ARTICULATED ARM TAPPING MACHINES PNEUMATIC...

Documents

Transcript of ARTICULATED ARM TAPPING MACHINES Tapping Machine.pdf · ARTICULATED ARM TAPPING MACHINES PNEUMATIC...