todescosrl.it · Art. 214 UNI ISO DIN uni-iso 2725 3124 BUSSOLA 1/4" ESAGONALE CON PROFILO OGIVALE...

Art. 214

UNI ISO DINuni-iso 2725 3124

BUSSOLA 1/4" ESAGONALE CON PROFILO OGIVALE EGODRONATURA, FINITURA CROMATA LUCIDA, IN AC-CIAIO AL CROMO VANADIO. 1/4" HEXAGON SOCKET IN CHROME VANADIUM STEEL WITHOGIVAL PROFILE AND KNURLING, FULL POLISH FINISHED

Art.214.4 4 25 1214.4,5 4,5 25 1214.5 5 25 1214.5,5 5,5 25 1214.6 6 25 1214.7 7 25 1214.8 8 25 1214.9 9 25 1214.10 10 25 1214.11 11 25 1214.12 12 25 1214.13 13 25 1214.14 14 25 1

Art. 214.S13


SERIE DI 13 CHIAVI A BUSSOLA DA 1/4" ESAGONALICON PROFILO OGIVALE GODRONATE LUCIDE, IN AC-CIAIO AL CROMO VANADIO DA mm 4-4,5-5-5,5-6,7,8,9,10,11,12,13,14. ASSORTMENT OF 13 1/4" HEXAGON SOCKETS IN CHROMEVANADIUM STEEL WITH OGIVAL PROFILE AND KNURLING,FULL POLISH FINISHED, SIZES mm 4,4.5,5.5,6,7,8,9,10,11,12,13,14

Art.214.S13 --- --- 1

Art. 214.GS13


SERIE DI 13 CHIAVI A BUSSOLA DA 1/4" ESAGONALICON PROFILO OGIVALE GODRONATE LUCIDE, IN AC-CIAIO AL CROMO VANADIO DA mm 4-4,5-5-5,5-6,7,8,9,10,11,12,13,14 SU ROBUSTA GUIDA DISUPPORTO IN ACCIAIO. ASSORTMENT OF 13 1/4" HEXAGON SOCKETS IN CHROMEVANADIUM STEEL WITH OGIVAL PROFILE AND KNURLING,FULL POLISH FINISHED, SIZES mm 4,4.5,5.5,6,7,8,9,10,11,12,13,14, ON STEEL HOLDER

Art.214.GS13 --- --- 1

Art. 214.L

UNI ISO DINuni-iso 2725-1 3124

BUSSOLA 1/4" ESAGONALE LUNGA CON PROFILOOGIVALE E GODRONATURA, FINITURA CROMATALUCIDA, IN ACCIAIO AL CROMO VANADIO, LUN-GHEZZA mm 50. 1/4" LONG HEXAGON SOCKET IN CHROME VANADIUMSTEEL WITH OGIVAL PROFILE AND KNURLING, FULL PO-LISH FINISHED, LENGHT mm 50

Art.214.L4 4 50 1214.L4,5 4,5 50 1214.L5 5 50 1214.L5,5 5,5 50 1214.L6 6 50 1214.L7 7 50 1214.L8 8 50 1214.L9 9 50 1214.L10 10 50 1214.L11 11 50 1214.L12 12 50 1214.L13 13 50 1214.L14 14 50 1

Art. 214.SL13


SERIE DI 13 CHIAVI A BUSSOLA LUNGHE DA 1/4"ESAGONALI CON PROFILO OGIVALE GODRONATELUCIDE, IN ACCIAIO AL CROMO VANADIO, LUN-GHEZZA mm 50, MISURE mm 4-4,5-5-5,5-6-7-8-9-10-11-12-13-14, SENZA GUIDA. ASSORTMENT OF 13 1/4" LONG HEXAGON SOCKETS INCHROME VANADIUM STEEL WITH OGIVAL PROFILE ANDKNURLING, FULL POLISH FINISHED, LENGHT mm 50, SIZESmm 4-4,5-5-5,5-6-7-8-9-10-11-12-13-14

Art.214.SL13 --- --- 1

Art. 214.GSL13


SERIE DI 13 CHIAVI A BUSSOLA LUNGHE DA 1/4"ESAGONALI CON PROFILO OGIVALE GODRONATELUCIDE, IN ACCIAIO AL CROMO VANADIO, LUN-GHEZZA mm 50, MISURE mm 4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 SU ROBUSTA GUIDA DI SUPPORTO INACCIAIO. ASSORTMENT OF 13 1/4" LONG HEXAGON SOCKETS INCHROME VANADIUM STEEL WITH OGIVAL PROFILE ANDKNURLING, FULL POLISH FINISHED, LENGHT mm 50, SIZESmm 4-4,5-5-5,5-6-7-8-9-10-11-12-13-14, ON STEEL HOLDER

Art.214.GSL13 --- --- 1

Art. 214.GM13

ì

UNI ISO DIN--- --- ---

ROBUSTA GUIDA METALLICA IN ACCIAIO PER BUS-SOLE CON ATTACCO 1/4" PER 13 POSIZIONI, PROV-VISTA DI PRE-FORATURA AGLI ESTREMI PER ILFISSAGGIO CON VITI O RIVETTI, SISTEMA ANTIDI-STACCO BUSSOLA REXTAFIX® IN ACCIAIO, LUN-GHEZZA mm 210. STEEL HOLDER FOR 1/4" SOCKETS FOR N° 13 POSITIONS,IN CHROME VANADIUM STEEL, WITH 2 FIXING HOLES TOTHE EDGES FOR SCREWS OR RIVETS, ANTI-DETACHMENTSOCKET REXTAFIX® SYSTEM IN STEEL, LENGTH mm 210

Art.214.GM13 --- 250 1

Art. 214.C

REXTA DIVISIONRevisione 01 Maggio 2016

CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

28

CATALOGO 01/2016 - CATALOGUE

02CHIAVI A BUSSOLA E ACCESSORISOCKETS & ACCESSORIES

REXTA DIVISION Revisione 01 Maggio 2016

CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

2 9


UNI ISO DIN--- 2936 ---

CHIAVE A BUSSOLA MASCHIO DA 1/4" PER VITI CONESAGONO INCASSATO CON GODRONATURA, FINI-TURA CROMATA LUCIDA IN ACCIAIO AL CROMOVANADIO, DA mm 3, LUNGHEZZA TOTALE mm 32. 1/4" SOCKET FOR ALLEN SCREWS IN CHROME VANADIUMSTEEL WITH KNURLING, FULL POLISH FINISHED, SIZE mm3, TOTAL LENGHT mm 32

Art.214.C3 3 32 1214.C4 4 32 1214.C5 5 32 1214.C6 6 32 1

Art. 214.TX


BUSSOLA 1/4" CON PROFILO TORX® , FINITURACROMATA LUCIDA CON GODRONATURA, IN AC-CIAIO AL CROMO VANADIO. 1/4" SOCKET WITH TORX® PROFILE IN CHROME VANA-DIUM STEEL WITH KNURLING, FULL POLISH FINISHED

Art.214.TX5 E5 25 1214.TX6 E6 25 1214.TX7 E7 25 1214.TX8 E8 25 1214.TX10 E10 25 1

Art. 250.1/4


CRICCHETTO REVERSIBILE 1/4" DA 72 DENTI CON IN-VERSORE A LEVA E AGGANCIO DI SICUREZZA A PUL-SANTE, IN ACCIAIO AL CROMO VANADIO FINITURACROMATA LUCIDA, IMPUGNATURA COMFORT IN BI-MATERIALE. REVERSIBLE RATCHET 1/4" IN CHROME VANADIUM STEELWITH 72 TEETH AND LEVERAGE OPERATED REVERSAL SY-STEM WITH SAFETY QUICK RELEASE BUTTON, FULL PO-LISH FINISHED, BIMATERIAL ERGONOMIC COMFORTHANDLE

Art.250.1/4 1/4" 145 1

TX

Art. 250.1/4F


CRICCHETTO REVERSIBILE 1/4" DA 72 DENTI CON IN-VERSORE A CORONA E AGGANCIO DI SICUREZZA APULSANTE, IN ACCIAIO AL CROMO VANADIO FINI-TURA CROMATA LUCIDA, IMPUGNATURA COMFORTIN BIMATERIALE. REVERSIBLE RATCHET 1/4" IN CHROME VANADIUM STEELWITH 72 TEETH AND WHEEL OPERATED REVERSAL SY-STEM WITH SAFETY QUICK RELEASE BUTTON, FULL PO-LISH FINISHED, BIMATERIAL ERGONOMIC COMFORTHANDLE

Art.250.1/4F 1/4" 145 1

Art. 255.1/4


PROLUNGA INCLINABILE CON ATTACCO MASCHIODA 1/4", IMPUGNATURA ROBUSTA CON AGGANCIOA SFERA, ATTACCO FEMMINA DA 1/4" PER ASTASCORREVOLE, REALIZZATA IN ACCIAIO AL CROMOVANADIO CON FINITURA CROMATA LUCIDA, LUN-GHEZZA mm 150. 1/4" DRIVE SPINNER WITH STRONG HANDLE AND SWIVELWOBBLE CONNECTION 15° , BACK CONNECTOR 1/4" FORT-HANDLE, MADE IN CHROME VANADIUM STEEL, FULLPOLISH FINISHED, LENGHT mm 150

Art.255.1/4 1/4"-1/4" 150 1

Art. 260.1/4


TRAVERSINO DI MANOVRA CON ATTACCO SCORRE-VOLE DA 1/4" CON AGGANCIO A SFERA, IN ACCIAIOAL CROMO VANADIO FINITURA CROMATA LUCIDA,LUNGHEZZA mm 115. 1/4" T-HANDLE WITH SLIDING SQUARE DRIVE WITH STAN-DARD CONNECTION IN CHROME VANADIUM STEEL, FULLPOLISH FINISHED, LENGHT mm 115

Art.260.1/4 1/4" 115 1

Art. 270


PROLUNGA 1/4" CON AGGANCIO A SFERA, IN ACCIAIOAL CROMO VANADIO FINITURA CROMATA LUCIDA. 1/4" EXTENSION BAR WITH STANDARD CONNECTION INCHROME VANADIUM STEEL, FULL POLISH FINISHED

Art.270.50 1/4" -1/4" 50 1270.100 1/4" -1/4" 100 1270.150 1/4" -1/4" 150 1

Art. 280.1/4


SNODO CARDANICO 1/4" CON AGGANCIO A SFERA,IN ACCIAIO AL CROMO VANADIO FINITURA CRO-MATA LUCIDA. 1/4" UNIVERSAL JOINT WITH STANDARD CONNECTION INCHROME VANADIUM STEEL, FULL POLISH FINISHED

Art.280.1/4 1/4" -1/4" 42 1

Art. 281


RACCORDO AUMENTATORE DA 1/4" A 3/8" CON

AGGANCIO A SFERA PER BUSSOLE A MANO, IN AC-

CIAIO AL CROMO VANADIO FINITURA CROMATA

LUCIDA.

INCREASING ADAPTER FROM 1/4" TO 3/8" FOR HANDS

SOCKETS WITH STANDARD CONNECTION IN CHROME VA-

NADIUM STEEL, FULL POLISH FINISHED

Art.281 1/4"-3/8" 25 1

Art. 290.1/4SF48


ASSORTIMENTO DI BUSSOLE ESAGONALI E ACCESSORIDA 1/4" IN CONFEZIONE ANTIURTO DA 48 PEZZI: ART.214.5-5,5-6-7-8-9-10-11-12-13-14, 260.1/4, 280.1/4,333.1/4, 330.S31 BITSCON PORTAINSERTI DI SICUREZZAMECCANICO/MAGNTICO 31 PZ. , CRICCHETTO 250.1/4FDA 72 DENTI CON INVERSORE ACORONA E PULSANTE DISGANCIO, 271.100 PROLUNGA INCLINABILE, 255.1/4ESCLUSIVA IMPUGNATURA INCLINABILE CON ATTACCOSUPERIORE DA 1/4". ASSORTMENT OF 48 HEXAGON SOCKETS 1/4" AND ACCESSORIESIN SHOCK ABSORBING BLOWMOULD CASE "TOP DESIGN": ART.214.5-5,5-6-7-8-9-10-11-12-13-14, 260.1/4, 280.1/4, 333.1/4,330.S31 BITS BOX 31 PCS WITH SAFETY BITS HOLDER MECHANICAND MAGNETIC, RATCHET 250.1/4F WITH 72 THEETH ANDWHEEL OPERATED REVERSAL SYSTEM WITH SAFETY QUICK RE-LEASE BUTTON, 271.100 WOBBLE EXTENSION BAR, 255.1/4 EX-CLUSIVE WOBBLE HANDLE WITH TOP DRIVE OF 1/4" FOR TEEBAR.

Art.290.1/4SF48 --- --- 1

Art. 238


BUSSOLA 3/8" ESAGONALE CON PROFILO OGIVALEE GODRONATURA, FINITURA CROMATA LUCIDA, INACCIAIO AL CROMO VANADIO. 3/8" HEXAGON SOCKET IN CHROME VANADIUM STEEL WITHOGIVAL PROFILE AND KNURLING, FULL POLISH FINISHED

Art.238.6 6 30 1238.7 7 30 1238.8 8 30 1238.9 9 30 1

Art.238.10 10 30 1238.11 11 30 1238.12 12 30 1238.13 13 30 1238.14 14 30 1238.15 15 30 1238.16 16 30 1238.17 17 30 1238.18 18 30 1238.19 19 30 1238.20 20 30 1238.21 21 30 1238.22 22 30 1

Art. 238.GS17


SERIE DI 17 BUSSOLE ESAGONALI 3/8" CON PROFILOOGIVALE E GODRONATURA, FINITURA CROMATALUCIDA, IN ACCIAIO AL CROMO VANADIO, DA mm6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21,22, SU ROBUSTA GUIDA DI SUPPORTO IN ACCIAIO. ASSORTMENT OF 17 3/8" HEXAGON SOCKETS IN CHROMEVANADIUM STEEL WITH OGIVAL PROFILE AND KNURLING,FULL POLISH FINISHED, SIZES mm 6, 7, 8, 9, 10, 11, 12, 13,14, 15, 16, 17, 18, 19, 20, 21, 22 , ON STEEL HOLDER

Art.238.GS17 --- --- 1

Art. 238.GM17

ì


ROBUSTA GUIDA METALLICA IN ACCIAIO PER BUS-SOLE CON ATTACCO 3/8" PER 17 POSIZIONI MISUREDA 6 A 22 mm, PROVVISTA DI PRE-FORATURA AGLIESTREMI PER IL FISSAGGIO CON VITI O RIVETTI, SI-STEMA ANTIDISTACCO BUSSOLA REXTAFIX® IN AC-CIAIO, LUNGHEZZA mm 390. STEEL HOLDER FOR 3/8" SOCKETS FOR N° 17 POSITIONS,SIZE FROM mm 6 TO mm 22, IN CHROME VANADIUMSTEEL, WITH 2 FIXING HOLES TO THE EDGES FOR SCREWSOR RIVETS, ANTI-DETACHMENT SOCKET REXTAFIX® SY-STEM IN STEEL, LENGHT mm 390

Art.238.GM17 --- 390 1

Art. 238.C


CHIAVE A BUSSOLA MASCHIO DA 3/8" PER VITI CONESAGONO INCASSATO CON GODRONATURA, FINI-TURA CROMATA LUCIDA IN ACCIAIO AL CROMOVANADIO, LUNGHEZZA INSERTO mm 47. 3/8" SOCKET FOR ALLEN SCREWS IN CHROME VANADIUMSTEEL WITH KNURLING, FULL POLISH FINISHED, BLADELENGHT mm 47

Art.238.C3 3 45 1238.C4 4 45 1238.C5 5 45 1238.C6 6 45 1238.C8 8 45 1238.C10 10 45 1

Art. 238.GSC6


SERIE DI 6 BUSSOLE MASCHIO ESAGONALI 3/8" CONGODRONATURA, FINITURA CROMATA LUCIDA, INACCIAIO AL CROMO VANADIO, PER VITI CON ESA-GONO INCASSATO DA mm 3, 4, 5, 6, 8, 10, SU RO-BUSTA GUIDA DI SUPPORTO IN ACCIAIO. SET OF 6 SOCKETS 3/8" FOR ALLEN SCREWS IN CHROMEVANADIUM STEEL WITH KNURLING, FULL POLISH FINI-SHED, SIZE mm 3-4-5-6-8-10, ON STEEL HOLDER

Art.238.GSC6 --- --- 1

Art. 238.GM6

ì



CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

210



CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

2 11


ROBUSTA GUIDA METALLICA IN ACCIAIO PER BUS-SOLE MASCHIO ESAGONALI CON ATTACCO 3/8" PER6 POSIZIONI MISURE DA 3 A 10 mm, PROVVISTA DIPRE-FORATURA AGLI ESTREMI PER IL FISSAGGIOCON VITI O RIVETTI, SISTEMA ANTIDISTACCO BUS-SOLA REXTAFIX® IN ACCIAIO. STEEL HOLDER FOR 3/8"" SOCKETS FOR N° 6 POSITIONS ,SIZE FROM mm 3 TO mm 10 IN CHROME VANADIUMSTEEL, WITH 2 FIXING HOLES TO THE EDGES FOR SCREWSOR RIVETS, ANTI-DETACHMENT SOCKET REXTAFIX® SY-STEM IN STEEL

Art.238.GM6 --- 160 1

Art. 238.CX

UNI ISO DIN--- --- 3121

CHIAVE A BUSSOLA 3/8" CON GODRONATURA, FI-NITURA CROMATA SATINATA, PR0FILO TORX® MA-SCHIO, IN ACCIAIO AL CROMO VANADIO.3/8" BIT SOCKET FOR TORX® SCREWS, IN CHROME VA-NADIUM STEEL WITH KNURLING, SATIN FINISHED

Art.238.CX20 20 48 1238.CX25 25 48 1238.CX27 27 48 1238.CX30 30 48 1238.CX40 40 48 1238.CX45 45 48 1238.CX50 50 48 1

Art. 238.GX7


SERIE 7 CHIAVI A BUSSOLA 3/8" CON GODRONA-TURA, FINITURA CROMATA SATINATA, IN ACCIAIOAL CROMO VANADIO, MISURE TORX® MASCHIOT20,25,27,30,40,45,50, SU GUIDA DI SUPPORTO INPLASTICA.SET OF 7 3/8" BIT SOCKETS FOR TORX® SCREWS, INCHROME VANADIUM STEEL WITH KNURLING, SATIN FINI-SHED, SIZE T20,25,27,30,40,45,50, ON PLASTIC HOLDER

Art.238.GX7 --- --- 1

Art. 250.3/8F


CRICCHETTO REVERSIBILE 3/8" DA 72 DENTI CON IN-VERSORE A CORONA E AGGANCIO DI SICUREZZA APULSANTE, IN ACCIAIO AL CROMO VANADIO FINI-TURA CROMATA LUCIDA, IMPUGNATURA COMFORTIN BIMATERIALE. REVERSIBLE RATCHET 3/8" IN CHROME VANADIUM STEELWITH 72 TEETH AND WHEEL OPERATED REVERSAL SY-STEM WITH SAFETY QUICK RELEASE BUTTON, FULL PO-LISH FINISHED, BIMATERIAL ERGONOMIC COMFORTHANDLE

Art.250.3/8F 3/8" 195 1

Art. 260.3/8



Art.260.3/8 3/8" 200 1

Art. 278.150


PROLUNGA 3/8" LUNGHEZZA mm 150 CON BLOC-CAGGIO DI SICUREZZA A GHIERA, IN ACCIAIO ALCROMO VANADIO FINITURA CROMATA LUCIDA. 3/8" EXTENSION WITH SAFETY QUICK RELEASE CON-NNECTION, IN CHROME VANADIUM STEEL, FULL POLISHFINISHED mm 150

Art.278.150 3/8"-3/8" 150 1

Art. 279


PROLUNGA 3/8" INCLINABILE 15° LUNGHEZZA CONAGGANCIO A SFERA, IN ACCIAIO AL CROMO VANA-DIO FINITURA CROMATA LUCIDA. 3/8" EXTENSION WITH SWIVEL WOBBLE CONNECTION15°, IN CHROME VANADIUM STEEL, FULL POLISH FINISHED

Art.279.75 3/8"-3/8" 75 1279.150 3/8"-3/8" 150 1279.250 3/8"-3/8" 250 1

Art. 280.3/8



Art.280.3/8 3/8"-3/8" 56 1

Art. 290.3/8SF28


ASSORTIMENTO DI BUSSOLE ESAGONALI E ACCESSORIDA 3/8" IN CONFEZIONE ANTIURTO DA 28 PEZZI: ART.238.6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22, ART.238.C3-4-5-6-8-10, PROLUNGA CON GHIERA DI SICUREZZA278.150, PROLUNGA INCLINABILE 15˚ 279.75, 260.3/8,280.3/8, CON CRICCHETTO 250.3/8F DA 72 DENTI CON IN-VERSORE A CORONA E PULSANTE DI RILASCIO. ASSORTMENT OF 28 HEXAGON SOCKETS 3/8" AND ACCESSO-RIES IN SHOCK ABSORBING BLOWMOULD CASE "TOP DESIGN",WITH REVERSIBLE RATCHET 72 TEETH AND WHEEL OPERATEDREVERSAL SYSTEM WITH SAFETY QUICK RELEASE BUTTON ANDEXTENSION BARS ONE WOBBLE ART. 279.75 AND ONE WITH SA-FETY QUICK RELEASE SYSTEM ART. 278.150, SOCKETS ART.238.6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22, ART. 238.C3-4-5-6-8-10

Art.290.3/8SF28 --- --- 1

Art. 282


RACCORDO RIDUTTORE DA 3/8" A 1/4" CON AG-GANCIO A SFERA PER BUSSOLE A MANO, IN AC-CIAIO AL CROMO VANADIO FINITURA CROMATALUCIDA. REDUCING ADAPTER FROM 3/8" TO 1/4" FOR HANDS SOC-KETS WITH STANDARD CONNECTION IN CHROME VANA-DIUM STEEL, FULL POLISH FINISHED

Art.282 3/8"-1/4" 30 1

Art. 283


RACCORDO AUMENTATORE DA 3/8" A 1/2" CONAGGANCIO A SFERA PER BUSSOLE A MANO, IN AC-CIAIO AL CROMO VANADIO FINITURA CROMATALUCIDA. INCREASING ADAPTER FROM 3/8" TO 1/2" FOR HANDSSOCKETS WITH STANDARD CONNECTION IN CHROME VA-NADIUM STEEL, FULL POLISH FINISHED

Art.283 3/8"-1/2" 30 1

Art. 212


BUSSOLA 1/2" ESAGONALE CON PROFILO OGIVALEE GODRONATURA, FINITURA CROMATA LUCIDA, INACCIAIO AL CROMO VANADIO. 1/2" HEXAGON SOCKET IN CHROME VANADIUM STEELWITH OGIVAL PROFILE AND KNURLING, FULL POLISH FI-NISHED

Art.212.8 8 38 1212.9 9 38 1212.10 10 38 1212.11 11 38 1212.12 12 38 1212.13 13 38 1212.14 14 38 1212.15 15 38 1212.16 16 38 1212.17 17 38 1212.18 18 38 1212.19 19 38 1212.20 20 38 1212.21 21 38 1212.22 22 40 1212.23 23 40 1212.24 24 40 1212.25 25 40 1212.26 26 42 1212.27 27 45 1212.28 28 45 1212.29 29 45 1212.30 30 45 1212.32 32 45 1

Art. 212.S24


SERIE DI 24 BUSSOLE ESAGONALI CON PROFILO OGI-VALE E GODRONATURA, FINITURA CROMATA LU-CIDA, IN ACCIAIO AL CROMO VANADIO, DA mm 8,9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,24, 25, 26, 27, 28, 29, 30, 32. SET OF 24 HEXAGON SOCKETS IN CHROME VANADIUMSTEEL WITH OGIVAL PROFILE AND KNURLING, FULL PO-LISH FINISHED, SIZES mm 8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26, 27,28,29,30,32

Art.212.S24 --- --- 1

Art. 212.GS24


SERIE DI 24 BUSSOLE ESAGONALI DA 1/2" CON PRO-FILO OGIVALE E GODRONATURA, FINITURA CRO-MATA LUCIDA, IN ACCIAIO AL CROMO VANADIO,DA mm 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20,21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, SU 2 ROBU-STE GUIDE DI SUPPORTO IN ACCIAIO. SET OF 24 HEXAGON SOCKETS IN CHROME VANADIUMSTEEL WITH OGIVAL PROFILE AND KNURLING, FULL POLISHFINISHED, SIZES mm 8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,32, ON 2 STEEL HOLDERS

Art.212.GS24 --- --- 1

Art. 212.P


BUSSOLA 1/2" POLIGONALE CON PROFILO OGIVALEE GODRONATURA, FINITURA CROMATA LUCIDA, INACCIAIO AL CROMO VANADIO. 1/2" BIHEXAGON SOCKET IN CHROME VANADIUM STEELWITH OGIVAL PROFILE AND KNURLING, FULL POLISH FINISHED

Art.212.P8 8 38 1212.P9 9 38 1212.P10 10 38 1212.P11 11 38 1212.P12 12 38 1212.P13 13 38 1212.P14 14 38 1212.P15 15 38 1212.P16 16 38 1212.P17 17 38 1212.P18 18 38 1212.P19 19 38 1212.P20 20 38 1212.P21 21 38 1212.P22 22 40 1212.P23 23 40 1212.P24 24 40 1212.P25 25 40 1212.P26 26 42 1212.P27 27 45 1212.P28 28 45 1212.P29 29 45 1212.P30 30 45 1212.P32 32 45 1


CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

212



CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

2 13


Art. 212.SP24


SERIE DI 24 BUSSOLE POLIGONALI CON PROFILOOGIVALE E GODRONATURA, FINITURA CROMATALUCIDA, IN ACCIAIO AL CROMO VANADIO, DA mm8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22,23, 24, 25, 26, 27, 28, 29, 30, 32. SET OF 24 BIHEXAGON SOCKETS IN CHROME VANADIUMSTEEL WITH OGIVAL PROFILE AND KNURLING, FULL PO-LISH FINISHED, SIZES mm 8,9,10,11,12,13,14,15,16, 17,18,19, 20,21,22,23,24,25,26,27,28 ,29,30,32

Art.212.SP24 --- --- 1

Art. 212.GSP24


SERIE DI 24 BUSSOLE POLIGONALI DA 1/2" CONPROFILO OGIVALE E GODRONATURA, FINITURACROMATA LUCIDA, IN ACCIAIO AL CROMO VANA-DIO, DA mm 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, SU 2 RO-BUSTE GUIDE DI SUPPORTO IN ACCIAIO. SET OF 24 BIHEXAGON SOCKETS IN CHROME VANADIUMSTEEL WITH OGIVAL PROFILE AND KNURLING, FULL PO-LISH FINISHED, SIZES mm 8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28, 29,30,32, ON 2 STEELHOLDERS

Art.212.GSP24 --- --- 1

Art. 212.GM24-1


ROBUSTA GUIDA METALLICA IN ACCIAIO PER BUS-SOLE CON ATTACCO 1/2" PER 15 POSIZIONI MISUREDA 8 A 22 mm, PROVVISTA DI PRE-FORATURA AGLIESTREMI PER IL FISSAGGIO CON VITI O RIVETTI, SI-

STEMA ANTIDISTACCO BUSSOLA REXTAFIX® IN AC-CIAIO, LUNGHEZZA mm 365. STEEL HOLDER FOR 1/2" SOCKETS FOR N° 15 POSITIONS,IN CHROME VANADIUM STEEL, SIZE FROM mm 8 TO mm22, WITH 2 FIXING HOLES TO THE EDGES FOR SCREWSOR RIVETS, ANTI-DETACHMENT SOCKET REXTAFIX® SY-STEM IN STEEL, LENGTH mm 365

Art.212.GM24-1 --- 365 1

Art. 212.GM24-2


ROBUSTA GUIDA METALLICA IN ACCIAIO PER BUS-SOLE CON ATTACCO 1/2" PER 9 POSIZIONI MISUREDA 23 A 32 mm, PROVVISTA DI PRE-FORATURA AGLIESTREMI PER IL FISSAGGIO CON VITI O RIVETTI, SI-STEMA ANTIDISTACCO BUSSOLA REXTAFIX® IN AC-CIAIO, LUNGHEZZA mm 390. STEEL HOLDER FOR 1/2" SOCKETS FOR N° 9 POSITIONS,SIZE FROM mm 23 TO mm32, IN CHROME VANADIUMSTEEL, WITH 2 FIXING HOLES TO THE EDGES FOR SCREWSOR RIVETS, ANTI-DETACHMENT SOCKET REXTAFIX® SY-STEM IN STEEL, LENGTH mm 390

Art.212.GM24-2 --- 390 1

Art. 212.PL


BUSSOLA 1/2" POLIGONALE LUNGA CON PROFILOOGIVALE E GODRONATURA, FINITURA CROMATALUCIDA, IN ACCIAIO AL CROMO VANADIO. 1/2" LONG BIHEXAGON SOCKET IN CHROME VANADIUMSTEEL WITH OGIVAL PROFILE AND KNURLING, FULL PO-LISH FINISHED

Art.212.PL10 10 78 1212.PL11 11 78 1212.PL12 12 78 1212.PL13 13 78 1212.PL14 14 78 1212.PL15 15 78 1212.PL16 16 78 1212.PL17 17 78 1212.PL18 18 78 1212.PL19 19 78 1212.PL21 21 78 1212.PL22 22 78 1212.PL24 24 78 1212.PL27 27 78 1212.PL30 30 78 1212.PL32 32 78 1

Art. 212.C

UNI ISO DIN--- --- 7422

CHIAVE A BUSSOLA MASCHIO DA 1/2" PER VITI CONESAGONO INCASSATO CON GODRONATURA, FINI-TURA CROMATA LUCIDA IN ACCIAIO AL CROMO VA-NADIO, MISURA mm 5, LUNGHEZZATOTALE mm 55. 1/2" SOCKET FOR ALLEN SCREWS IN CHROME VANADIUMSTEEL WITH KNURLING, FULL POLISH FINISHED, TOTALLENGHT mm 55

Art.212.C4 4 55 1212.C5 5 55 1212.C6 6 55 1212.C7 7 55 1212.C8 8 55 1212.C10 10 55 1212.C12 12 55 1212.C14 14 55 1212.C17 17 55 1212.C19 19 55 1

Art. 212.SC9

UNI ISO DIN--- --- 7422

SERIE DI 9 CHIAVI A BUSSOLA MASCHIO DA 1/2" PERVITI CON ESAGONO INCASSATO CON GODRONA-TURA, FINITURA CROMATA LUCIDA IN ACCIAIO ALCROMO VANADIO, MISURA mm 5-6-7-8-10-12-14-17-19, LUNGHEZZA mm 55. SET OF 9 SOCKETS 1/2" FOR ALLEN SCREWS IN CHROMEVANADIUM STEEL WITH KNURLING, FULL POLISH FINI-SHED, SIZE mm 5-6-7-8-10-12-14-17-19, LENGHT mm 55

Art.212.SC9 --- --- 1

Art. 212.GSC9

UNI ISO DIN--- --- 7422

SERIE DI 9 CHIAVI A BUSSOLA MASCHIO DA 1/2" PERVITI CON ESAGONO INCASSATO CON GODRONA-TURA, FINITURA CROMATA LUCIDA IN ACCIAIO ALCROMO VANADIO, MISURA mm 5-6-7-8-10-12-14-17-19, LUNGHEZZA mm 55, SU ROBUSTA GUIDA DISUPPORTO IN ACCIAIO. SET OF 9 SOCKETS 1/2" FOR ALLEN SCREWS IN CHROMEVANADIUM STEEL WITH KNURLING, FULL POLISH FINI-SHED, SIZE mm 5-6-7-8-10-12-14-17-19, LENGHT mm 55,ON STEEL HOLDER

Art.212.GSC9 --- --- 1

Art. 212.GM9


ROBUSTA GUIDA METALLICA IN ACCIAIO PER BUS-SOLE CON ATTACCO 1/2" PER 9 POSIZIONI, PROVVI-STA DI PRE-FORATURA AGLI ESTREMI PER ILFISSAGGIO CON VITI O RIVETTI, SISTEMA ANTIDI-STACCO BUSSOLA REXTAFIX® IN ACCIAIO, LUN-GHEZZA mm 245. STEEL HOLDER FOR 1/2" SOCKETS FOR N° 9 POSITIONS,IN CHROME VANADIUM STEEL, WITH 2 FIXING HOLES TOTHE EDGES FOR SCREWS OR RIVETS, ANTI-DETACHMENTSOCKET REXTAFIX® SYSTEM IN STEEL, LENGTH mm 245

Art.212.GM9 --- 245 1

Art. 212.CL

UNI ISO DIN--- --- 7422

BUSSOLA 1/2" CON CHIAVE LUNGA A ESAGONO MA-

SCHIO PER VITI CON ESAGONO INCASSATO CON GO-

DRONATURA, FINITURA CROMATA LUCIDA IN

ACCIAIO AL CROMO VANADIO, LUNGHEZZA TOTALE

mm 100. 1/2" LONG SOCKET FOR ALLEN SCREWS IN CHROME VA-NADIUM STEEL WITH KNURLING, FULL POLISH FINISHED,TOTAL LENGHT mm 100

Art.212.CL5 5 100 1212.CL6 6 100 1212.CL7 7 100 1212.CL8 8 100 1212.CL10 10 100 1

Art. 212.GCL5

UNI ISO DIN--- --- 7422

SERIE DI 5 BUSSOLE 1/2" CON CHIAVE LUNGA A ESA-GONO MASCHIO PER VITI CON ESAGONO INCAS-SATO CON GODRONATURA, FINITURA CROMATALUCIDA IN ACCIAIO AL CROMO VANADIO, MISUREmm 5,6,7,8,10, LUNGHEZZA mm 100, SU ROBUSTAGUIDA DI SUPPORTO IN ACCIAIO. SET OF 5 1/2" LONG SOCKET FOR ALLEN SCREWS IN CHROMEVANADIUM STEEL WITH KNURLING, FULL POLISH FINISHED,SIZE mm 10 LENGHT mm 100, ON STEEL HOLDER

Art.212.GCL5 --- --- 1

Art. 212.GM5


ROBUSTA GUIDA METALLICA IN ACCIAIO PER BUS-SOLE CON ATTACCO 1/2" PER 5 POSIZIONI, PROVVI-STA DI PRE-FORATURA AGLI ESTREMI PER ILFISSAGGIO CON VITI O RIVETTI, SISTEMA ANTIDI-STACCO BUSSOLA REXTAFIX® IN ACCIAIO, LUN-GHEZZA mm 160. STEEL HOLDER FOR 1/2" SOCKETS FOR N° 5 POSITIONS,IN CHROME VANADIUM STEEL, WITH 2 FIXING HOLES TOTHE EDGES FOR SCREWS OR RIVETS, ANTI-DETACHMENTSOCKET REXTAFIX® SYSTEM IN STEEL, LENGTH mm 160

Art.212.GM5 --- 160 1

Art. 212.TX

TX


BUSSOLA 1/2" CON GODRONATURA, FINITURACROMATA LUCIDA CON PROFILO TORX® , IN AC-CIAIO AL CROMO VANADIO. 1/2" SOCKET WITH TORX® PROFILE IN CHROME VANA-DIUM STEEL WITH KNURLING, FULL POLISH FINISHED

Art.212.TX10 E 10 38 1212.TX12 E 12 38 1212.TX14 E 14 38 1212.TX16 E 16 38 1212.TX18 E 18 38 1212.TX20 E 20 38 1212.TX24 E 24 38 1

Art. 212.GTX7


SERIE 7 BUSSOLE 1/2" CON GODRONATURA, FINITURACROMATA LUCIDA, IN ACCIAIO AL CROMO VANADIO,CON PROFILO TORX® MISURE E10,12,14,16,18,20,24,SU ROBUSTA GUIDA DI SUPPORTO IN ACCIAIO. SET OF 7 1/2" SOCKET WITH TORX® PROFILE IN CHROMEVANADIUM STEEL WITH KNURLING, FULL POLISH FINISHED,SIZE E10,12,14,16,18,20,24 , ON STEEL HOLDER

Art.212.GTX7 --- --- 1

Art. 212.GM7


ROBUSTA GUIDA METALLICA IN ACCIAIO PER BUS-SOLE CON ATTACCO 1/2" PER 7 POSIZIONI, PROVVI-STA DI PRE-FORATURA AGLI ESTREMI PER ILFISSAGGIO CON VITI O RIVETTI, SISTEMA ANTIDI-STACCO BUSSOLA REXTAFIX® IN ACCIAIO, LUN-GHEZZA mm 210. STEEL HOLDER FOR 1/2" SOCKETS FOR N° 7 POSITIONS,IN CHROME VANADIUM STEEL, WITH 2 FIXING HOLESTO THE EDGES FOR SCREWS OR RIVETS, ANTI-DETA-CHMENT SOCKET REXTAFIX® SYSTEM IN STEEL,LENGTH mm 210

Art.212.GM7 --- 210 1

TX


CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

214



CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

2 15


Art. 212.CTX


CHIAVE A BUSSOLA 1/2" CON GODRONATURA, FI-NITURA CROMATA LUCIDA, PR0FILO TORX® MA-SCHIO FORATO, IN ACCIAIO AL CROMO VANADIO.1/2" BIT SOCKET FOR TAMPER RESISTANT TORX® SCREWS,IN CHROME VANADIUM STEEL WITH KNURLING, FULL PO-LISH FINISHED

Art.212.CTX20 T 20 55 1212.CTX25 T 25 55 1212.CTX27 T 27 55 1212.CTX30 T 30 55 1212.CTX40 T 40 55 1212.CTX45 T 45 55 1212.CTX50 T 50 55 1212.CTX55 T 55 55 1212.CTX60 T 60 55 1

Art. 212.GCT9


SERIE 9 CHIAVI A BUSSOLA 1/2" CON GODRONA-TURA, FINITURA CROMATA LUCIDA, IN ACCIAIO ALCROMO VANADIO, MISURE TORX® FORATO MA-SCHIO T20,,25,27,30,40,45,50,55,60, SU ROBUSTAGUIDA DI SUPPORTO IN ACCIAIO. SET OF 9 1/2" BIT SOCKETS FOR TORX® SCREWS TAMPERPROOF, IN CHROME VANADIUM STEEL WITH KNURLING,FULL POLISH FINISHED, SIZE T20,,25,27,30,40,45,50,55,60,ON STEEL HOLDER

Art.212.GCT9 --- --- 1

Art. 212.CX

UNI ISO DIN--- --- 3121

TR

TR

CHIAVE A BUSSOLA 1/2" CON GODRONATURA, FI-NITURA CROMATA SATINATA, PR0FILO TORX® MA-SCHIO, IN ACCIAIO AL CROMO VANADIO.1/2" BIT SOCKET FOR TORX® SCREWS, IN CHROME VA-NADIUM STEEL WITH KNURLING, CHROME SATIN FINI-SHED

Art.212.CX10 T10 60 1212.CX10L T10 100 1212.CX15 T15 60 1212.CX15L T15 100 1212.CX20 T20 60 1212.CX20L T20 100 1212.CX25 T25 60 1212.CX25L T25 100 1212.CX27 T27 60 1212.CX27L T27 100 1212.CX30 T30 60 1212.CX30L T30 100 1212.CX40 T40 60 1212.CX40L T40 100 1212.CX45 T45 60 1212.CX45L T45 100 1212.CX50 T50 60 1212.CX50L T50 100 1212.CX55 T55 60 1212.CX55L T55 100 1

Art. 212.GCX9

UNI ISO DIN--- --- 3121

SERIE 9 CHIAVI A BUSSOLA 1/2" TORX® MASCHIO,CON GODRONATURA, FINITURA CROMATA SATI-NATA, IN ACCIAIO AL CROMO VANADIO, MISURET15,20,25,27,30,40,45,50,55, SU ROBUSTA GUIDA DISUPPORTO IN ACCIAIO. SET OF 9 1/2" BIT SOCKETS FOR TORX® SCREWS TAMPERPROOF, IN CHROME VANADIUM STEEL WITH KNURLING,CHROME SATIN FINISHED, SIZE T15, 20, 25, 27, 30, 40, 45,50, 55, ON STEEL HOLDER

Art.212.GCX9 --- 60 1

Art. 212.GCX9L

UNI ISO DIN--- --- 3121

SERIE 9 CHIAVI A BUSSOLA 1/2" TORX® MASCHIOLUNGO, CON GODRONATURA, FINITURA CROMATASATINATA, IN ACCIAIO AL CROMO VANADIO, MI-SURE T15L,20L,25L,27L,30L,40L,45L, 50L,55L, SU RO-BUSTA GUIDA DI SUPPORTO IN ACCIAIO. SET OF 9 1/2" LONG BIT SOCKETS FOR TORX® SCREWSTAMPER PROOF, IN CHROME VANADIUM STEEL WITHKNURLING, CHROME SATIN FINISHED, SIZE T15L, 20L, 25L,27L, 30L, 40L, 45L, 50L, 55L, ON STEEL HOLDER

Art.212.GCX9L --- 100 1

Art. 212.CXZ

UNI ISO DIN--- --- 3121

CHIAVE A BUSSOLA 1/2" CON GODRONATURA, FI-NITURA CROMATA SATINATA, PR0FILO XZN® MA-SCHIO, IN ACCIAIO AL CROMO VANADIO. 1/2" BIT SOCKET FOR XZN® SCREWS, IN CHROME VANA-DIUM STEEL WITH KNURLING, CHROME SATIN FINISHED

Art.212.CXZ5 M5 60 1212.CXZ5L M5L 100 1212.CXZ6 M6 60 1212.CXZ6L M6L 100 1212.CXZ8 M8 60 1212.CXZ8L M8L 100 1212.CXZ10 M10 60 1212.CXZ10L M10L 100 1212.CXZ12 M12 60 1212.CXZ12L M12L 100 1212.CXZ14 M14 60 1212.CXZ14L M14L 100 1

Art. 212.GCZ6

UNI ISO DIN--- --- 3121

SERIE 6 CHIAVI A BUSSOLA 1/2" XZN® MASCHIO,CON GODRONATURA, FINITURA CROMATA SATI-NATA, IN ACCIAIO AL CROMO VANADIO, MISUREM5,6,8,10,12,14, SU ROBUSTA GUIDA DI SUPPORTOIN ACCIAIO. SET OF 6 1/2" BIT SOCKETS FOR XZN® SCREWS , INCHROME VANADIUM STEEL WITH KNURLING, CHROMESATIN FINISHED, SIZE M5,6,8,10,12,14, ON STEEL HOLDERRAIL

Art.212.GCZ6 --- 60 1

Art. 212.GCZ6L

UNI ISO DIN--- --- 3121

SERIE 6 CHIAVI A BUSSOLA 1/2" XZN® LUNGHE MA-SCHIO, CON GODRONATURA, FINITURA CROMATASATINATA, IN ACCIAIO AL CROMO VANADIO, MI-SURE M5L,6L,8L,10L,12L,14L, SU ROBUSTA GUIDADI SUPPORTO IN ACCIAIO.SET OF 6 1/2" LONG BIT SOCKETS FOR XZN® SCREWS , INCHROME VANADIUM STEEL WITH KNURLING, CHROMESATIN FINISHED, SIZE M5L,6L,8L,10L,12L,14L, ON STEELHOLDER RAIL

Art.212.GCZ6L --- 100 1

Art. 212.CRB

UNI ISO DIN--- --- 3121

CHIAVE A BUSSOLA 1/2" CON GODRONATURA, FI-NITURA CROMATA SATINATA, PR0FILO RIBE® MA-SCHIO, IN ACCIAIO AL CROMO VANADIO.1/2" BIT SOCKET FOR RIBE® SCREWS, IN CHROME VANA-DIUM STEEL WITH KNURLING, CHROME SATIN FINISHED

Art.212.CRB4 4 60 1212.CRB4L 4L 100 1212.CRB5 5 60 1212.CRB5L 5L 100 1212.CRB6 6 60 1212.CRB6L 6L 100 1212.CRB7 7 60 1212.CRB7L 7L 100 1212.CRB8 8 60 1212.CRB8L 8L 100 1212.CRB9 9 60 1212.CRB9L 9L 100 1212.CRB10 10 60 1212.CRB10L 10L 100 1212.CRB12 12 60 1212.CRB12L 12L 100 1212.CRB14 14 60 1212.CRB14L 14L 100 1212.CRB16 16 60 1212.CRB16L 16L 100 1

Art. 212.GRB9

UNI ISO DIN--- --- 3121

SERIE 9 CHIAVI A BUSSOLA 1/2" RIBE® MASCHIO,CON GODRONATURA, FINITURA CROMATA SATI-NATA, IN ACCIAIO AL CROMO VANADIO, MISUREN° 5,6,7,8,9,10,12,14,16, SU ROBUSTA GUIDA DI SUP-PORTO IN ACCIAIO.SET OF 9 1/2" BIT SOCKETS FOR RIBE® SCREWS , INCHROME VANADIUM STEEL WITH KNURLING, CHROMESATIN FINISHED, SIZE N° 5,6,7,8,9,10,12,14,16, ON STEELHOLDER RAIL

Art.212.GRB9 --- 60 1

Art. 212.GRB9L

UNI ISO DIN--- --- 3121

SERIE 9 CHIAVI A BUSSOLA LUNGHE 1/2" RIBE® MA-SCHIO, CON GODRONATURA, FINITURA CROMATASATINATA, IN ACCIAIO AL CROMO VANADIO, MI-SURE N° 5L,6L,7L,8L,9L,10L,12L,14L,16L, SU ROBU-STA GUIDA DI SUPPORTO IN ACCIAIO. SET OF 9 1/2" LONG BIT SOCKETS FOR RIBE® SCREWS , INCHROME VANADIUM STEEL WITH KNURLING, CHROMESATIN FINISHED, SIZE N° 5L,6L,7L,8L,9L,10L,12L,14L,16L,ON STEEL HOLDER RAIL

Art.212.GRB9L --- 100 1

Art. 212.CRF

UNI ISO DIN--- --- 3121

CHIAVE A BUSSOLA 1/2" CON GODRONATURA, FI-NITURA CROMATA SATINATA, PR0FILO RIBE® MA-SCHIO FORATO, IN ACCIAIO AL CROMO VANADIO. 1/2" BIT SOCKET FOR TAMPER RIBE® SCREWS, INCHROME VANADIUM STEEL WITH KNURLING, CHROMESATIN FINISHED

Art.212.CRF4 4 60 1212.CRF4L 4L 100 1212.CRF5 5 60 1212.CRF5L 5L 100 1212.CRF6 6 60 1212.CRF6L 6L 100 1212.CRF7 7 60 1212.CRF7L 7L 100 1212.CRF8 8 60 1212.CRF8L 8L 100 1212.CRF9 9 60 1212.CRF9L 9L 100 1212.CRF10 10 60 1212.CRF10L 10L 100 1212.CRF12 12 60 1212.CRF12L 12L 100 1212.CRF14 14 60 1212.CRF14L 14L 100 1212.CRF16 16 60 1212.CRF16L 16L 100 1

Art. 212.GRF9

UNI ISO DIN--- --- 3121

SERIE 9 CHIAVI A BUSSOLA 1/2" RIBE® FORATO MA-SCHIO, CON GODRONATURA, FINITURA CROMATASATINATA, IN ACCIAIO AL CROMO VANADIO, MI-SURE N° 5,6,7,8,9,10,12,14,16, SU ROBUSTA GUIDADI SUPPORTO IN ACCIAIO. SET OF 9 1/2" BIT SOCKETS FOR TAMPER RIBE® SCREWS ,IN CHROME VANADIUM STEEL WITH KNURLING, CHROMESATIN FINISHED, SIZE N° 5,6,7,8,9,10,12,14,16, ON STEELHOLDER RAIL

Art.212.GRF9 --- 60 1

Art. 212.GRF9L

UNI ISO DIN--- --- 3121

SERIE 9 CHIAVI A BUSSOLA LUNGHE 1/2" RIBE® FO-RATO MASCHIO, CON GODRONATURA, FINITURACROMATA SATINATA, IN ACCIAIO AL CROMO VA-NADIO, MISURE N° 5L,6L,7L,8L,9L,10L,12L,14L,16L,SU ROBUSTA GUIDA DI SUPPORTO IN ACCIAIO. SET OF 9 1/2" LONG BIT SOCKETS FOR TAMPER RIBE®SCREWS , IN CHROME VANADIUM STEEL WITH KNURLING,CHROME SATIN FINISHED, SIZE N° 5L, 6L, 7L, 8L, 9L, 10L,12L, 14L, 16L, ON STEEL HOLDER RAIL


CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

216



CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

2 17


Art.212.GRF9L --- 100 1

Art. 250.1/2


CRICCHETTO REVERSIBILE 1/2" DA 72 DENTI CON IN-VERSORE A LEVA E AGGANCIO DI SICUREZZA A PUL-SANTE, IN ACCIAIO AL CROMO VANADIO FINITURACROMATA LUCIDA, IMPUGNATURA COMFORT IN BI-MATERIALE, LUNGHEZZA mm 245. REVERSIBLE RATCHET 1/2" IN CHROME VANADIUM STEELWITH 72 TEETH AND LEVERAGE OPERATED REVERSAL SY-STEM WITH SAFETY QUICK RELEASE BUTTON, FULL PO-LISH FINISHED, BIMATERIAL ERGONOMIC COMFORTHANDLE, LENGHT mm 245

Art.250.1/2 1/2" 245 1

Art. 250.1/2F


CRICCHETTO REVERSIBILE 1/2" DA 72 DENTI CON IN-VERSORE A CORONA E AGGANCIO DI SICUREZZA APULSANTE, IN ACCIAIO AL CROMO VANADIO FINI-TURA CROMATA LUCIDA, IMPUGNATURA COMFORTIN BIMATERIALE, LUNGHEZZA mm 245. REVERSIBLE RATCHET 1/2" IN CHROME VANADIUM STEELWITH 72 TEETH AND WHEEL OPERATED REVERSAL SY-STEM WITH SAFETY QUICK RELEASE BUTTON, FULL PO-LISH FINISHED, BIMATERIAL ERGONOMIC COMFORTHANDLE, LENGHT mm 245

Art.250.1/2F 1/2" 245 1

Art. 260.1/2



Art.260.1/2 1/2" 250 1

Art. 272


PROLUNGA 1/2" CON AGGANCIO A SFERA, IN AC-CIAIO AL CROMO VANADIO FINITURA CROMATALUCIDA. 1/2" EXTENSION WITH STANDARD CONNECTION INCHROME VANADIUM STEEL, FULL POLISH FINISHED

Art.272.125 1/2"-1/2" 125 1272.250 1/2"-1/2" 250 1

Art. 273


PROLUNGA 1/2" CON BLOCCAGGIO DI SICUREZZA AGHIERA, IN ACCIAIO AL CROMO VANADIO FINITURACROMATA LUCIDA. 1/2" EXTENSION WITH SAFETY QUICK RELEASE CON-NNECTION, IN CHROME VANADIUM STEEL, FULL POLISHFINISHED

Art.273.125 1/2"-1/2" 125 1273.250 1/2"-1/2" 250 1

Art. 274


PROLUNGA 1/2" INCLINABILE 15° CON AGGANCIOA SFERA, IN ACCIAIO AL CROMO VANADIO FINI-TURA CROMATA LUCIDA. 1/2" EXTENSION WITH SWIVEL WOBBLE CONNECTION15°, IN CHROME VANADIUM STEEL, FULL POLISH FINISHED

Art.274.125 1/2"-1/2" 125 1274.250 1/2"-1/2" 250 1

Art. 280.1/2



Art.280.1/2 1/2"-1/2" 72 1

Art. 290.1/2SF24


ASSORTIMENTO DI BUSSOLE ESAGONALI E ACCES-SORI DA 1/2" IN CONFEZIONE ANTIURTO DA 24PEZZI: ART. 212.8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-27-30-32, 273.125, 260.1/2, 280.1/2,CON CRICCHETTO 250.1/2F DA 72 DENTI CON IN-VERSORE A CORONA E PULSANTE DI RILASCIO EPROLUNGA CON GHIERA DI SICUREZZA. ASSORTMENT OF 24 HEXAGON SOCKETS 1/2" AND AC-CESSORIES IN SHOCK ABSORBING BLOWMOULD CASE"TOP DESIGN", WITH REVERSIBLE RATCHET 72 TEETH ANDWHEEL OPERATED REVERSAL SYSTEM WITH SAFETYQUICK RELEASE BUTTON AND EXTENSION BAR WITH SA-FETY QUICK RELEASE SYSTEM, ART. 212.10-11-12-13-14-15-16-17-18-19-20-21-22-24-27-30-32 mm, 273.125,250.1/2, 260.1/2, 280.1/2

Art.290.1/2SF24 --- --- 1

Art. 284


RACCORDO AUMENTATORE DA 1/2" A 3/4" PERBUSSOLE A MANO, IN ACCIAIO AL CROMO VANA-DIO FINITURA LUCIDA. INCREASING ADAPTER FROM 1/2" TO 3/4" FOR HANDSSOCKETS WITH STANDARD CONNECTION IN CHROME VA-NADIUM STEEL, FULL POLISH FINISHED

Art.284 1/2"-3/4" 35 1

Art. 285


RACCORDO RIDUTTORE DA 1/2" A 3/8" CON AG-GANCIO A SFERA PER BUSSOLE A MANO, IN AC-CIAIO AL CROMO VANADIO FINITURA LUCIDA. REDUCING ADAPTER FROM 1/2 TO 3/8" FOR HANDS SOC-KETS WITH STANDARD CONNECTION IN CHROME VANA-DIUM STEEL, FULL POLISH FINISHED

Art.285 1/2"-3/8" 35 1

Art. 234


BUSSOLA 3/4" ESAGONALE CON PROFILO OGIVALE,IN ACCIAIO AL CROMO VANADIO FINITURA CRO-MATA LUCIDA. 3/4" HEXAGON SOCKET IN CHROME VANADIUM STEELWITH OGIVAL PROFILE, FULL POLISH FINISHED

Art.234.22 22 50 1234.23 23 50 1234.24 24 51 1234.26 26 52 1234.27 27 52 1234.28 28 52 1234.30 30 54 1234.32 32 56 1234.33 33 56 1234.34 34 56 1234.36 36 58 1234.38 38 60 1234.41 41 64 1234.46 46 68 1234.50 50 72 1

Art. 234.P


BUSSOLA 3/4" POLIGONALE CON PROFILO OGIVALE,IN ACCIAIO AL CROMO VANADIO FINITURA CRO-MATA LUCIDA. 3/4" BIHEXAGON SOCKET IN CHROME VANADIUM STEELWITH OGIVAL PROFILE, FULL POLISH FINISHED

Art.234.P22 22 50 1234.P24 24 51 1234.P27 27 52 1234.P30 30 54 1234.P34 34 56 1234.P36 36 58 1234.P38 38 60 1234.P41 41 64 1234.P46 46 68 1234.P50 50 72 1

Art. 250.3/4


CRICCHETTO REVERSIBILE ULTRAROBUSTO DA 3/4"CON 24 DENTI, INVERSORE A LEVA E AGGANCIO DI SI-CUREZZA A PULSANTE, IN ACCIAIO AL CROMO VANA-DIO FINITURA CROMATA LUCIDA, IMPUGNATURAZIGRINATA ANTISCIVOLO, LUNGHEZZA mm 505. REVERSIBLE RATCHET HEAVY DUTY 3/4" IN CHROME VA-NADIUM STEEL WITH 24 TEETH AND LEVERAGE OPERA-TED REVERSAL SYSTEM WITH SAFETY QUICK RELEASEBUTTON, FULL POLISH FINISHED AND KNURLED ANTISLIPHANDLE, LENGHT mm 505

Art.250.3/4 --- 505 1

Art. 250.3/4F


CRICCHETTO REVERSIBILE 3/4" DA 72 DENTI CON IN-

VERSORE A CORONA E AGGANCIO DI SICUREZZA A

PULSANTE, IN ACCIAIO AL CROMO VANADIO FINI-

TURA CROMATA SATINATA, IMPUGNATURA COM-

FORT, LUNGHEZZA mm 505. REVERSIBLE RATCHET 3/4" IN CHROME VANADIUM STEELWITH 72 TEETH AND WHEEL OPERATED REVERSAL SY-STEM WITH SAFETY QUICK RELEASE BUTTON, SATIN FINI-SHED, ERGONOMIC COMFORT HANDLE, LENGHT mm 505

Art.250.3/4F --- 505 1

Art. 260.3/4



Art.260.3/4 3/4" 500 1

Art. 275


PROLUNGA 3/4" LUNGHEZZA CON AGGANCIO ASFERA, IN ACCIAIO AL CROMO VANADIO FINITURACROMATA LUCIDA.3/4" EXTENSION WITH STANDARD CONNECTION INCHROME VANADIUM STEEL, FULL POLISH FINISHED

Art.275.200 1/2"-1/2" 200 1275.400 1/2"-1/2" 400 1


CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

218



CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

2 19


Art. 286


RACCORDO AUMENTATORE DA 3/4" A 1" CON AG-GANCIO A SFERA PER BUSSOLE A MANO, IN AC-CIAIO AL CROMO VANADIO FINITURA LUCIDA. INCREASING ADAPTER FROM 3/4" TO 1" FOR HANDS SOC-KETS WITH STANDARD CONNECTION IN CHROME VANA-DIUM STEEL, FULL POLISH FINISHED

Art.286 3/4"-1" 48 1

Art. 287


RACCORDO RIDUTTORE DA 3/4" A 1/2" CON AG-GANCIO A SFERA PER BUSSOLE A MANO, IN AC-CIAIO AL CROMO VANADIO FINITURA LUCIDA. REDUCING ADAPTER FROM 3/4" TO 1/2" FOR HANDS SOC-KETS WITH STANDARD CONNECTION IN CHROME VANA-DIUM STEEL, FULL POLISH FINISHED

Art.287 3/4"-1/2" 48 1

Art. 290.3/4S12


ROBUSTA VALIGETTA METALLICA DI ACCESSORI 3/4"DA 12 PZ, CON 9 BUSSOLE ESAGONALI CON PRO-FILO OGIVALE MISURA mm 22,24,27,30,32,36,41,46,50 , 1 CRICCHETTO REVERSIBILE DA 24 DENTI EINVERSORE A LEVA CON SISTEMA DI SICUREZZAART. 250.3/4, 1 PROLUNGA DA 400 mm ART. 275.400, 1 TRAVERSINO SCORREVOLE ART. 260.3/4. ASSORTMENT OF 12 ACCESSORIES 3/4" IN STRONG ME-TALLIC CASE, WITH 9 HEXAGON SOCKETS 3/4", REVERSI-BLE RATCHET 24 TEETH AND LEVERAGE OPERATEDREVERSAL SYSTEM WITH SAFETY QUICK RELEASE BUT-TON, ART. 234.22,24,27,30,32,36,41, 46,50 mm, ART250.3/4, 275.400, 260.3/4

Art.290.3/4S12 --- --- 1

Art. 290.3/4S12 ROBUSTA VALIGETTA METALLICA DI ACCESSORI 3/4"DA 12 PZ, CON 9 BUSSOLE POLIGONALI CON PRO-FILO OGIVALE MISURA mm 22,24,27,30,32,36,41,46,50, 1 CRICCHETTO REVERSIBILE DA 24 DENTI E IN-VERSORE A LEVA CON SISTEMA DI SICUREZZA ART.250.3/4, 1 PROLUNGA DA 400 mm ART. 275.400 , 1TRAVERSINO SCORREVOLE ART. 260.3/4. ASSORTMENT OF 12 ACCESSORIES 3/4" IN STRONG ME-TALLIC CASE, WITH 9 BI-HEXAGON SOCKETS 3/4", REVER-SIBLE RATCHET 24 TEETH AND LEVERAGE OPERATEDREVERSAL SYSTEM WITH SAFETY QUICK RELEASE BUT-TON, ART. 234.22,24,27,30,32,36,41, 46,50 mm, ART250.3/4, 275.400, 260.3/4

Art.290.3/4SP12 --- --- 1

Art. 290.3/4SF12


ROBUSTA VALIGETTA METALLICA DI ACCESSORI 3/4"DA 12 PZ, CON 9 BUSSOLE ESAGONALI CON PROFILOOGIVALE MISURA mm 22,24,27,30,32,36,41,46,50, 1CRICCHETTO REVERSIBILE DA 72 DENTI E INVERSORE ACORONA CON SISTEMA DI SICUREZZA ART. 250.3/4F, 1PROLUNGA DA 400 mm ART. 275.400 , 1 TRAVERSINOSCORREVOLE ART. 260.3/4. ASSORTMENT OF 12 ACCESSORIES 3/4" IN STRONG ME-TALLIC CASE, WITH 9 HEXAGON SOCKETS 3/4", REVERSI-BLE RATCHET 72 TEETH AND WHEEL OPERATED REVERSALSYSTEM WITH SAFETY QUICK RELEASE BUTTON, ART.234.22,24,27,30,32,36,41, 46,50 mm, ART 250.3/4F,275.400, 260.3/4

Art.290.3/4SF12 --- --- 1

Art. 290.3/4SFP12 ROBUSTA VALIGETTA METALLICA DI ACCESSORI 3/4"DA 12 PZ, CON 9 BUSSOLE POLIGONALI CON PROFILOOGIVALE MISURA mm 22,24,27,30,32, 36,41,46,50, 1CRICCHETTO REVERSIBILE DA 72 DENTI E INVERSORE ACORONA CON SISTEMA DI SICUREZZA ART. 250.3/4F, 1PROLUNGA DA 400 mm ART. 275.400 , 1 TRAVERSINOSCORREVOLE ART. 260.3/4. ASSORTMENT OF 12 ACCESSORIES 3/4" IN STRONG ME-TALLIC CASE, WITH 9 BI-HEXAGON SOCKETS 3/4", REVER-SIBLE RATCHET 72 TEETH AND WHEEL OPERATEDREVERSAL SYSTEM WITH SAFETY QUICK RELEASE BUT-

TON, ART. 234.22,24,27,30,32,36,41, 46,50 mm, ART250.3/4F, 275.400, 260.3/4

Art.290.3/4SFP12 --- --- 1

Art. 211


BUSSOLA 1" ESAGONALE LUCIDA CON PROFILOOGIVALE IN ACCIAIO AL CROMO VANADIO FINI-TURA LUCIDA. 1" HEXAGON SOCKET IN CHROME VANADIUM STEELWITH OGIVAL PROFILE, FULL POLISH FINISHED

Art.211.46 46 75 1211.50 50 75 1211.55 55 80 1211.60 60 84 1211.65 65 87 1211.70 70 93 1211.75 75 97 1211.80 80 103 1

Art. 211.P


1" HEXAGON SOCKET IN CHROME VANADIUM STEELWITH OGIVAL PROFILE, FULL POLISH FINISHED. 1" BIHEXAGON SOCKET IN CHROME VANADIUM STEELWITH OGIVAL PROFILE, FULL POLISH FINISHED

Art.211.P46 46 75 1211.P50 50 75 1211.P55 55 80 1211.P60 60 84 1211.P65 65 87 1211.P70 70 93 1211.P75 75 97 1211.P80 80 103 1

Art. 260.1


TRAVERSINO DI MANOVRA CON ATTACCO SCORREVOLEDA 1" PER BUSSOLE A MANO, IN ACCIAIO AL CROMO VA-NADIO FINITURA LUCIDA, LUNGHEZZA mm 550.1" T-HANDLE WITH SLIDING SQUARE DRIVE WITH STAN-DARD CONNECTION IN CHROME VANADIUM STEEL, FULLPOLISH FINISHED, LENGHT mm 550

Art.260.1 1" 550 1

Art. 276


PROLUNGA DA 1" PER BUSSOLE A MANO, IN AC-CIAIO AL CROMO VANADIO FINITURA LUCIDA. 1" EXTENSION WITH STANDARD CONNECTION INCHROME VANADIUM STEEL, FULL POLISH FINISHED

Art.276.200 1"-1" 200 1276.400 1"-1" 400 1

Art. 288


RACCORDO RIDUTTORE DA 1" A 3/4" PER BUSSOLEA MANO, IN ACCIAIO AL CROMO VANADIO TOR-SIONE MASSIMA 1412 Nm, FINITURA LUCIDA. REDUCING ADAPTER FROM 1" TO 3/4" FOR HANDS SOC-KETS WITH STANDARD CONNECTION IN CHROME VANA-DIUM STEEL, FULL POLISH FINISHED

Art.288 1"-3/4" 48 1

Art. 250.1


CRICCHETTO DA 1" MODELLO GRANDI SFORZI DA24 DENTI CON INVERSORE A LEVA, REALIZZATO INACCIAIO AL CROMO VANADIO FINITURA SATINATA. REVERSIBLE RATCHET 1" HEAVY DUTY IN CHROME VA-NADIUM STEEL WITH 24 TEETH AND LEVERAGE OPERA-TED REVERSAL SYSTEM, SATIN FINISHED

Art.250.1 1" 180 1

Art. 250.1A


ASTA DI MANOVRA PER CRICCHETTO ART. 250.1REALIZZATA IN ACCIAIO AL CROMO VANADIO, FI-NITURA SATINATA, LUNGHEZZA mm 560. HEAVY DUTY BAR FOR RATCHET ART.250.1 IN CHROMEVANADIUM STEEL, SATIN FINISHED, LENGHT mm 560

Art.250.1A --- 560 1

Art. 290.1S12


ROBUSTA VALIGETTA METALLICA DI ACCESSORI 1"DA 12 PZ, CON 8 BUSSOLE ESAGONALI CON PRO-FILO OGIVALE ART. 211.46-50-55-60-65-70-75-80, 1CRICCHETTO REVERSIBILE "GRANDI SFORZI" DA 24DENTI E INVERSORE A LEVA ART. 250.1, PROLUNGADA 200 mm ART. 276.200, TRAVERSINO SCORRE-VOLE ART. 260.1, ASTA DI MANOVRA PER CRIC-CHETTO ART. 250.1A . ASSORTMENT OF 12 ACCESSORIES 1" IN STRONG METAL-LIC CASE, WITH 8 HEXAGON SOCKETS WITH OGIVAL PRO-FILE, HEAVY DUTY REVERSIBLE RATCHET 24 TEETH ANDLEVERAGE OPERATED REVERSAL SYSTEM , ART. 211.46-50-55-60-65-70-75-80 mm, ART 250.1, 276.200, 260.1, 250.1A

Art.290.1S12 --- --- 1

Art. 214.M


BUSSOLA TIPO MACCHINA 1/4" ESAGONALE CONPROFILO OGIVALE AD ALTE PRESTAZIONI, IN AC-CIAIO AL CROMO MOLIBDENO FINITURA FOSFA-TATA, LUNGHEZZA TOTALE mm 25, MISURA EDIAMETRO BOCCA COME INDICATO IN TABELLA .1/4" IMPACT HEXAGON SOCKET IN CHROME MOLYBDE-NUM HIGH PERFORMANCE STEEL WITH OGIVAL PROFILE,BLACK PHOSPHERATE FINISH, TOTAL LENGHT mm 25, SIZEAND FRONT DIAMETER AS REPORTED ON THE CHART.

Art.214.M3,2 3,2 6,8 1214.M3,5 3,5 7 1214.M4 4 7,8 1214.M4,5 4,5 8,4 1214.M5 5 9 1214.M5,5 5,5 9,5 1214.M6 6 10,3 1214.M7 7 11,5 1214.M8 8 12,5 1214.M9 9 14 1214.M10 10 15 1214.M11 11 16,5 1214.M12 12 17,5 1214.M13 13 19 1214.M14 14 20 1

Art. 214.M”


BUSSOLA TIPO MACCHINA 1/4" ESAGONALE CON PRO-FILO OGIVALE AD ALTE PRESTAZIONI, IN ACCIAIO ALCROMO MOLIBDENO FINITURA FOSFATATA, LUN-GHEZZA TOTALE mm 25, MISURA IN POLLICI E DIAME-TRO BOCCA COME INDICATO IN TABELLA .1/4" IMPACT HEXAGON SOCKET IN CHROME MOLYBDENUMHIGH PERFORMANCE STEEL WITH OGIVAL PROFILE, BLACKPHOSPHERATE FINISH, TOTAL LENGHT mm 25, INCH SIZE ANDFRONT DIAMETER AS REPORTED ON THE CHART.

Art.214.M1/8 1/8 6,8 1214.M3/16 3/16 8,8 1214.M1/4 1/4 10,8 1214.M5/16 5/16 12,5 1214.M3/8 3/8 14,7 1214.M7/16 7/16 16,5 1214.M1/2 1/2 18,6 1214.M9/16 9/16 20 1

Art. 214.MC

UNI ISO DIN--- --- 7427, 7426

BUSSOLA TIPO MACCHINA 1/4" AD ALTE PRESTA-ZIONI PER VITI CON ESAGONO INCASSATO , IN AC-CIAIO AL CROMO MOLIBDENO CON FINITURAFOSFATATA, INSERTO ESAGONALE SOSTITUIBILE,DIAMETRO BOCCA mm 12, MISURA E LUNGHEZZATOTALE COME INDICATO IN TABELLA . 1/4" IMPACT SOCKET FOR ALLEN SCREWS MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEEL


CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

220



CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

2 21


WITH INTERCHANGEABLE BIT, BLACK PHOSPHERATE FI-NISH, FRONT DIAMETER mm 12, SIZE AND TOTAL LENGHTAS REPORTED ON THE CHART.

Art.214.MC3 3 41 1214.MC4 4 41 1214.MC5 5 41 1214.MC6 6 41 1214.MC8 8 41 1214.MC10 10 46 1

Art. 214.RMC

UNI ISO DIN--- --- 7427, 7426

INSERTO ESAGONALE DI RICAMBIO 1/4" PER BUS-SOLA TIPO MACCHINA ART. 214.MC, FORNITO CONSPINA DI FISSAGGIO, MISURA COME INDICATO INTABELLA. 1/4" SPARE PART BIT FOR IMPACT SOCKET ART. 214.MCWITH REPLACEMENT PIN, SIZE AS REPORTED ON THECHART

Art.214.RMC3 3 --- 1214.RMC4 4 --- 1214.RMC5 5 --- 1214.RMC6 6 --- 1214.RMC8 8 --- 1214.RMC10 10 --- 1

Art. 281.M


RACCORDO TIPO MACCHINA AUMENTATORE DA1/4" A 3/8" AD ALTE PRESTAZION,I IN ACCIAIO ALCROMO MOLIBDENO, FINITURA FOSFATATA . INCREASING ADAPTER FROM 1/4" TO 3/8" FOR HANDSSOCKETS WITH STANDARD CONNECTION IN CHROMEMOLYBDENUM HIGH PERFORMANCE STEEL, BLACK PHO-SPHERATE FINISHED.

Art.281.M 1/4"-3/8" 25 1

Art. 270.M


PROLUNGA 1/4" TIPO MACCHINA AD ALTE PRESTA-ZIONI IN ACCIAIO AL CROMO MOLIBDENO FINI-TURA FOSFATATA, LUNGHEZZA COME INDICATO INTABELLA.1/4" IMPACT EXTENSION BAR IN CHROME MOLYBDENUMHIGH PERFORMANCE STEEL , BLACK PHOSPHERATE FINI-SHED, LENGHT AS REPORTED ON THE CHART

Art.270.M50 1/4"-1/4" 50 1270.M100 1/4"-1/4" 100 1

Art. 280.M1/4


SNODO CARDANICO 1/4" TIPO MACCHINA AD ALTEPRESTAZIONI IN ACCIAIO AL CROMO MOLIBDENO,FINITURA FOSFATATA. 1/4" IMPACT UNIVERSAL JOINT IN CHROME MOLYBDE-NUM HIGH PERFORMANCE STEEL , BLACK PHOSPHERATEFINISHED

Art.280.M1/4 1/4"-1/4" 36 1

Art. 262.1


SPINA DI TENUTA Ø1,5xL10 mm PER BUSSOLE AT-TACCO DA 1/4" TIPO MACCHINA MISURA DA 3,2 A14 mm.LOCK PIN Ø1,5xL10 mm FOR 1/4" IMPACT SOCKETS SIZESFROM 3,2 TO 14 mm

Art.262.1 3,2-14 10x1,5 10

Art. 264.1


ANELLO ELASTICO DI SICUREZZA Ø2,5mm X Ø9mmPER BUSSOLE ATTACCO DA 1/4" TIPO MACCHINAMISURA DA 3,2 A 14 mm. SAFETY RING Ø2,5mm X Ø9mm FOR 1/4" IMPACT SOC-KETS SIZES FROM 3,2 TO 14 mm

Art.264.1 3,2-14 2,5x9 10

Art. 238.M


BUSSOLA TIPO MACCHINA 3/8" ESAGONALE CONPROFILO OGIVALE AD ALTE PRESTAZIONI, IN AC-CIAIO AL CROMO MOLIBDENO FINITURA FOSFA-TATA, LUNGHEZZA TOTALE mm 32, MISURA EDIAMETRO BOCCA COME INDICATO IN TABELLA . 3/8" IMPACT HEXAGON SOCKET IN CHROME MOLYBDE-NUM HIGH PERFORMANCE STEEL WITH OGIVAL PROFILE,BLACK PHOSPHERATE FINISH, TOTAL LENGHT mm 32, SIZEAND FRONT DIAMETER AS REPORTED ON THE CHART.

Art.238.M6 6 11,5 1238.M7 7 12,5 1238.M8 8 14 1238.M9 9 15 1238.M10 10 16,5 1238.M11 11 17,5 1238.M12 12 19 1238.M13 13 20 1238.M14 14 21,5 1238.M15 15 22,5 1238.M16 16 24 1238.M17 17 25 1238.M18 18 26,5 1238.M19 19 27,5 1238.M21 21 30 1238.M22 22 31,5 1238.M24 24 34 1

Art. 238.ML


BUSSOLA LUNGA TIPO MACCHINA 3/8" ESAGONALECON PROFILO OGIVALE AD ALTE PRESTAZIONI, INACCIAIO AL CROMO MOLIBDENO FINITURA FOSFA-TATA, LUNGHEZZA TOTALE mm 65 (mm 70 MIS. 21 E22), MISURA E DIAMETRO BOCCA COME INDICATOIN TABELLA .3/8" LONG IMPACT HEXAGON SOCKET IN CHROME MO-

LYBDENUM HIGH PERFORMANCE STEEL WITH OGIVALPROFILE, BLACK PHOSPHERATE FINISH, TOTAL LENGHTmm 65 (mm 70 SIZE 21 & 22), SIZE AND FRONT DIAMETERAS REPORTED ON THE CHART.

Art.238.ML6 6 11,5 1238.ML7 7 12,5 1238.ML8 8 14 1238.ML9 9 15 1238.ML10 10 16,5 1238.ML11 11 17,5 1238.ML12 12 19 1238.ML13 13 20 1238.ML14 14 21,5 1238.ML15 15 22,5 1238.ML16 16 24 1238.ML17 17 25 1238.ML18 18 26,5 1238.ML19 19 27,5 1238.ML21 21 30 1238.ML22 22 31,5 1

Art. 238.M


BUSSOLA IN POLLICI TIPO MACCHINA ATTACCO3/8" BOCCA ESAGONALE CON PROFILO OGIVALE ADALTE PRESTAZIONI, IN ACCIAIO AL CROMO MOLIB-DENO FINITURA FOSFATATA, LUNGHEZZA TOTALEmm 32, MISURA E DIAMETRO BOCCA COME INDI-CATO IN TABELLA . 3/8" DRIVE IMPACT HEXAGON SOCKET IN INCHES, MADEIN CHROME MOLYBDENUM HIGH PERFORMANCE STEELWITH OGIVAL PROFILE, BLACK PHOSPHERATE FINISH,TOTAL LENGHT mm 32, SIZE AND FRONT DIAMETER ASREPORTED ON THE CHART.

Art.238.M1/4 1/4" 12 1238.M5/16 5/16" 14 1238.M3/8 3/8" 16 1238.M7/16 7/16" 17,5 1238.M1/2 1/2" 20 1238.M9/16 9/16" 21,5 1238.M5/8 5/8" 24 1238.M11/16 11/16" 26 1238.M3/4 3/4" 27,5 1238.M7/8 7/8" 31,5 1238.M15/16 15/16" 34 1

Art. 238.ML


BUSSOLA IN POLLICI LUNGA TIPO MACCHINA AT-TACCO 3/8", BOCCA ESAGONALE CON PROFILO OGI-VALE AD ALTE PRESTAZIONI, IN ACCIAIO AL CROMOMOLIBDENO FINITURA FOSFATATA, LUNGHEZZA TO-TALE mm 65 (mm 70 MIS. 21 E 22), MISURA E DIA-METRO BOCCA COME INDICATO IN TABELLA . 3/8" DRIVE LONG IMPACT HEXAGON SOCKET IN INCHES,MADE IN CHROME MOLYBDENUM HIGH PERFORMANCESTEEL WITH OGIVAL PROFILE, BLACK PHOSPHERATE FI-NISH, TOTAL LENGHT mm 65 (mm 70 SIZE 21 & 22), SIZEAND FRONT DIAMETER AS REPORTED ON THE CHART.

Art.238.ML1/4 1/4" 12 1238.ML5/16 5/16" 14 1238.ML3/8 3/8" 16 1238.ML7/16 7/16" 17,5 1238.ML1/2 1/2" 20 1238.ML9/16 9/16" 21,5 1238.ML5/8 5/8" 24 1238.ML11/16 11/16" 26 1238.ML3/4 3/4" 27,5 1238.ML7/8 7/8" 31,5 1

Art. 238.MC


BUSSOLA TIPO MACCHINA 3/8" AD ALTE PRESTA-ZIONI PER VITI CON ESAGONO INCASSATO , IN AC-CIAIO AL CROMO MOLIBDENO CON FINITURAFOSFATATA, INSERTO ESAGONALE SOSTITUIBILE, MI-SURA E LUNGHEZZA TOTALE COME INDICATO IN TA-BELLA .3/8" IMPACT SOCKET FOR ALLEN SCREWS MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEEL WITHINTERCHANGEABLE BIT, BLACK PHOSPHERATE FINISH, SIZEAND TOTAL LENGHT AS REPORTED ON THE CHART.

Art.238.MC4 4 46 1238.MC5 5 46 1238.MC6 6 46 1238.MC8 8 46 1238.MC10 10 51 1

Art. 238.RMC


INSERTO ESAGONALE DI RICAMBIO 3/8" PER BUS-SOLA TIPO MACCHINA ART. 238.MC, FORNITO CONSPINA DI FISSAGGIO, MISURA COME INDICATO INTABELLA.3/8" SPARE PART BIT FOR IMPACT SOCKET ART. 238.MCWITH REPLACEMENT PIN, SIZE AS REPORTED ON THECHART

Art.238.RMC4 4 25 1238.RMC5 5 25 1238.RMC6 6 25 1238.RMC8 8 25 1238.RMC10 10 25 1

Art. 262


SPINA DI TENUTA PER BUSSOLE ATTACCO DA 3/8"TIPO MACCHINA, DIMENSIONI E MISURA ESAGONOCOME INDICATO IN TABELLA .LOCK PIN FOR 3/8" IMPACT SOCKETS, DIMENSIONS ANDHEXAGON SIZE AS REPORTED ON THE CHART

Art.262.2 6-12 14x2,5 10262.3 13-19 16x2,5 10262.4 21-22 20x2,5 10

Art. 264


ANELLO ELASTICO DI SICUREZZA PER BUSSOLE TIPOMACCHINA ATTACCO DA 3/8" DIMENSIONI E MI-SURA ESAGONO COME INDICATO IN TABELLA. SAFETY RING FOR 3/8" IMPACT SOCKETS, HEXAGON SIZEAND DIMENSIONS AS REPORTED ON THE CHART

Art.264.2 6-12 3,5x13 10264.3 13-19 3,5x16 10264.4 21-22 4x19 10

Art. 279.M


PROLUNGA 3/8" TIPO MACCHINA AD ALTE PRESTA-ZIONI IN ACCIAIO AL CROMO MOLIBDENO FINI-TURA FOSFATATA, LUNGHEZZA COME INDICATO INTABELLA.


CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

222



CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

2 23


3/8" IMPACT EXTENSION BAR IN CHROME MOLYBDENUMHIGH PERFORMANCE STEEL , BLACK PHOSPHERATE FINI-SHED, LENGHT AS REPORTED ON THE CHART

Art.279.M75 3/8"-3/8" 75 1279.M125 3/8"-3/8" 125 1

Art. 280.M3/8


SNODO CARDANICO 3/8" TIPO MACCHINA AD ALTEPRESTAZIONI IN ACCIAIO AL CROMO MOLIBDENO,FINITURA FOSFATATA. 3/8" IMPACT UNIVERSAL JOINT IN CHROME MOLYBDE-NUM HIGH PERFORMANCE STEEL , BLACK PHOSPHERATEFINISHED

Art.280.M3/8 3/8"-3/8" 46 1

Art. 282.M


RACCORDO RIDUTTORE DA 3/8" A 1/4" AD ALTEPRESTAZIONI TORSIONE MASSIMA 62 Nm, IN AC-CIAIO AL CROMO MOLIBDENO FINITURA FOSFA-TATA, TIPO MACCHINA. REDUCING ADAPTER FROM 3/8" TO 1/4" FOR HANDS SOC-KETS WITH STANDARD CONNECTION IN CHROME MO-LYBDENUM HIGH PERFORMANCE STEEL, BLACKPHOSPHERATE FINISHED

Art.282.M 3/8"-1/4" 28 1

Art. 283.M


RACCORDO AUMENTATORE DA 3/8" A 1/2" ADALTE PRESTAZIONI IN ACCIAIO AL CROMO MOLIB-DENO FINITURA FOSFATATA, TIPO MACCHINA.

INCREASING ADAPTER FROM 3/8" TO 1/2" FOR HANDSSOCKETS WITH STANDARD CONNECTION IN CHROMEMOLYBDENUM HIGH PERFORMANCE STEEL, BLACK PHO-SPHERATE FINISHED

Art.283.M 3/8"-1/2" 36 1

Art. 212.M


BUSSOLA 1/2" ESAGONALE TIPO MACCHINA, CONPROFILO OGIVALE AD ALTE PRESTAZIONI, REALIZ-ZATA IN ACCIAIO AL CROMO MOLIBDENO FINITURAFOSFATATA, MISURA E LUNGHEZZA COME INDI-CATO IN TABELLA . 1/2" IMPACT HEXAGON SOCKET MADE IN CHROME MO-LYBDENUM HIGH PERFORMANCE STEEL WITH OGIVALPROFILE, BLACK PHOSPHERATE FINISHED, SIZE ANDLENGHT AS REPORTED ON THE CHART

Art.212.M8 8 38 1212.M9 9 38 1212.M10 10 38 1212.M11 11 38 1212.M12 12 38 1212.M13 13 38 1212.M14 14 38 1212.M15 15 38 1212.M16 16 38 1212.M17 17 38 1212.M18 18 38 1212.M19 19 38 1212.M20 20 40 1212.M21 21 40 1212.M22 22 40 1212.M23 23 40 1212.M24 24 41 1212.M25 25 45 1212.M26 26 45 1212.M27 27 45 1212.M28 28 48 1212.M29 29 48 1212.M30 30 50 1212.M32 32 50 1212.M34 34 50 1212.M36 36 50 1

Art. 212.ML


BUSSOLA 1/2" ESAGONALE TIPO MACCHINA LUNGAAD ALTE PRESTAZIONI CON PROFILO OGIVALE , REA-LIZZATA IN ACCIAIO AL CROMO MOLIBDENO FINI-TURA FOSFATATA, MISURA ESAGONO E LUNGHEZZACOME INDICATO IN TABELLA.1/2" LONG IMPACT HEXAGON SOCKET, MADE IN CHROMEMOLYBDENUM HIGH PERFORMANCE STEEL WITH OGIVALPROFILE, BLACK PHOSPHERATE FINISHED, SIZE ANDLENGHT AS REPORTED ON THE CHART.

Art.212.ML8 8 85 1212.ML9 9 85 1212.ML10 10 80 1212.ML11 11 85 1212.ML12 12 85 1212.ML13 13 80 1212.ML14 14 80 1212.ML15 15 85 1212.ML16 16 85 1212.ML17 17 80 1212.ML18 18 85 1212.ML19 19 80 1212.ML20 20 85 1212.ML21 21 80 1212.ML22 22 80 1212.ML23 23 80 1212.ML24 24 80 1212.ML25 25 85 1212.ML26 26 85 1212.ML27 27 80 1212.ML28 28 85 1212.ML29 29 85 1212.ML30 30 85 1212.ML32 32 85 1212.ML34 34 85 1

Art. 212.M”


BUSSOLA 1/2" ESAGONALE IN POLLICI TIPO MAC-CHINA, CON PROFILO OGIVALE AD ALTE PRESTA-ZIONI, REALIZZATA IN ACCIAIO AL CROMOMOLIBDENO FINITURA FOSFATATA, MISURA E LUN-GHEZZA COME INDICATO IN TABELLA . 1/2" IMPACT HEXAGON SOCKET IN INCHES, MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEELWITH OGIVAL PROFILE, BLACK PHOSPHERATE FINISHED,SIZE AND LENGHT AS REPORTED ON THE CHART

Art.212.M5/16 5/16" 40 1212.M3/8 3/8" 40 1212.M7/16 7/16" 40 1212.M1/2 1/2" 40 1212.M9/16 9/16" 40 1212.M5/8 5/8" 40 1212.M11/16 11/16" 40 1212.M3/4 3/4" 40 1212.M13/16 13/16" 40 1212.M7/8 7/8" 40 1212.M15/16 15/16" 45 1212.M1/1 1" 45 1

Art.212.M1-1/16 1+1/16" 48 1212.M1-1/8 1+1/8" 48 1212.M1-3/16 1+3/16" 48 1212.M1-1/4 1+1/4" 50 1

Art. 212.ML


BUSSOLA 1/2" ESAGONALE IN POLLICI TIPO MAC-CHINA LUNGA AD ALTE PRESTAZIONI CON PROFILOOGIVALE , REALIZZATA IN ACCIAIO AL CROMO MO-LIBDENO FINITURA FOSFATATA, MISURA ESAGONOE LUNGHEZZA COME INDICATO IN TABELLA. 1/2" LONG HEXAGON IMPACT SOCKET IN INCHES , MADEIN CHROME MOLYBDENUM HIGH PERFORMANCE STEELWITH OGIVAL PROFILE, BLACK PHOSPHERATE FINISHED,SIZE AND LENGHT AS REPORTED ON THE CHART.

Art.212.ML5/16 5/16" 85 1212.ML3/8 3/8" 85 1212.ML7/16 7/16" 85 1212.ML1/2 1/2" 85 1212.ML9/16 9/16" 85 1212.ML5/8 5/8" 85 1212.ML11/16 11/16" 85 1212.ML3/4 3/4" 85 1212.ML13/16 13/16" 85 1212.ML7/8 7/8" 85 1212.ML15/16 15/16" 85 1212.ML1/1 1" 85 1212.ML1-1/16 1+1/16" 85 1212.ML1-1/8 1+1/8" 85 1212.ML1-3/16 1+3/16" 85 1212.ML1-1/4 1+1/4" 85 1

Art. 212.MLN


BUSSOLA 1/2" ESAGONALE LUNGA TIPO MAC-CHINA CON PROFILO OGIVALE AD ALTE PRESTA-ZIONI, IN ACCIAIO AL CROMO MOLIBDENO,FINITURA FOSFATATA, CON PROTEZIONE IN NYLON. 1/2" DEEP IMPACT HEXAGON SOCKET IN CHROME MO-LYBDENUM HIGH PERFORMANCE STEEL WITH OGIVALPROFILE, BLACK PHOSPHERATE FINISHED, WITH NYLONPROTECTION

Art.212.MLN17 17 80 1212.MLN19 19 80 1212.MLN21 21 80 1

Art. 212.SMN3


SERIE DI N°3 BUSSOLE ESAGONALI LUNGHE 1/2"CON PROFILO OGIVALE AD ALTE PRESTAZIONI, INACCIAIO AL CROMO MOLIBDENO FINITURA FOSFA-TATA, TIPO MACCHINA CON PROTEZIONE INNYLON, DA mm 17,19,21. SET OF 3 DEEP IMPACT HEXAGON SOCKET 1/2" INCHROME MOLYBDENUM HIGH PERFORMANCE STEELWITH OGIVAL PROFILE, BLACK PHOSPHERATE FINISHED,WITH NYLON PROTECTION, SIZES mm 17,19,21

Art.212.SMN3 --- --- 1

Art. 212.MLS


BUSSOLA 1/2" ESAGONALE CON PARETI EXTRA-SOT-TILI, TIPO MACCHINA LUNGA AD ALTE PRESTAZIONICON PROFILO OGIVALE , REALIZZATA IN ACCIAIO ALCROMO MOLIBDENO FINITURA FOSFATATA, MI-SURA E LUNGHEZZA COME INDICATO IN TABELLA. 1/2" EXTRA-THIN WALL, HEXAGONAL LONG IMPACT SOC-KET, MADE IN CHROME MOLYBDENUM HIGH PERFOR-MANCE STEEL WITH OGIVAL PROFILE, BLACKPHOSPHERATE FINISHED, SIZE AND LENGHT AS REPORTEDON THE CHART.

Art.212.MLS16 16 63 1212.MLS17 17 63 1212.MLS18 18 63 1212.MLS19 19 63 1212.MLS21 21 63 1212.MLS22 22 63 1

Art. 212.MLS


BUSSOLA 1/2" ESAGONALE IN POLLICI CON PARETIEXTRA-SOTTILI, TIPO MACCHINA LUNGA AD ALTEPRESTAZIONI CON PROFILO OGIVALE , REALIZZATAIN ACCIAIO AL CROMO MOLIBDENO FINITURA FO-

SFATATA, MISURA E LUNGHEZZA COME INDICATOIN TABELLA. 1/2" EXTRA-THIN WALL, HEXAGON LONG IMPACT SOC-KET IN INCHES , MADE IN CHROME MOLYBDENUM HIGHPERFORMANCE STEEL WITH OGIVAL PROFILE, BLACKPHOSPHERATE FINISHED, SIZE AND LENGHT AS REPORTEDON THE CHART.

Art.212.MLS5/8 5/8" 63 1212.MLS3/4 3/4" 63 1212.MLS7/8 7/8" 63 1

Art. 212.MTX


BUSSOLA 1/2" TIPO MACCHINA CON PROFILO TORX®AD ALTE PRESTAZIONI, REALIZZATA IN ACCIAIO ALCROMO MOLIBDENO FINITURA FOSFATATA . 1/2" IMPACT SOCKET WITH TORX® PROFILE, MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEELWITH OGIVAL PROFILE, BLACK PHOSPHERATE FINISHED

Art.212.MTX10 E10 40 1212.MTX12 E12 40 1212.MTX14 E14 40 1212.MTX16 E16 40 1212.MTX18 E18 40 1212.MTX20 E20 40 1212.MTX24 E24 40 1

Art. 212.MC


BUSSOLA TIPO MACCHINA 1/2" AD ALTE PRESTAZIONIPER VITI CON ESAGONO INCASSATO , IN ACCIAIO ALCROMO MOLIBDENO CON FINITURA FOSFATATA, IN-SERTO ESAGONALE SOSTITUIBILE, MISURA E LUN-GHEZZA TOTALE COME INDICATO IN TABELLA . 1/2" IMPACT SOCKET FOR ALLEN SCREWS MADE IN CHROMEMOLYBDENUM HIGH PERFORMANCE STEEL WITH INTER-CHANGEABLE BIT, BLACK PHOSPHERATE FINISH, SIZE ANDTOTAL LENGHT AS REPORTED ON THE CHART.

Art.212.MC6 6 59 1212.MC8 8 59 1212.MC10 10 59 1212.MC12 12 59 1212.MC14 14 59 1212.MC17 17 74 1212.MC19 19 74 1


CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

224



CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

2 25


Art. 212.RMC


INSERTO ESAGONALE DI RICAMBIO 1/2" PER BUSSOLATIPO MACCHINA ART. 212.MC, FORNITO CON SPINA DIFISSAGGIO, MISURA COME INDICATO IN TABELLA.1/2" SPARE PART BIT FOR IMPACT SOCKET ART. 212.MC WITHREPLACEMENT PIN, SIZE AS REPORTED ON THE CHART

Art.212.RMC6 6 35 1212.RMC8 8 35 1212.RMC10 10 35 1212.RMC12 12 35 1212.RMC14 14 35 1212.RMC17 17 50 1212.RMC19 19 50 1

Art. 261.1


SPINA DI TENUTA 3x20 mm PER BUSSOLE ATTACCODA 1/2" TIPO MACCHINA MISURA DA 10 A 14mm. LOCK PIN 3x20 mm FOR 1/2" IMPACT SOCKETS SIZESFROM 10 TO 14 mm

Art.261.1 10-14 --- 10

Art. 261.2


SPINA DI TENUTA 3x25 mm PER BUSSOLE ATTACCODA 1/2" TIPO MACCHINA MISURA DA 15 A 32 mm. LOCK PIN 3x25 mm FOR 1/2" IMPACT SOCKETS SIZESFROM 15 TO 32 mm

Art.261.2 15-32 --- 10

Art. 263.1


ANELLO ELASTICO DI SICUREZZA 4x19 mm PER BUS-SOLE ATTACCO DA 1/2" TIPO MACCHINA MISURADA 10 A 14 mm. SAFETY RING 4X19 mm FOR 1/2" IMPACT SOCKETS SIZESFROM 10 TO 14 mm

Art.263.1 10-14 --- 10

Art. 263.2


ANELLO ELASTICO DI SICUREZZA 4x24 PER BUSSOLEATTACCO DA 1/2" TIPO MACCHINA MISURA DA 15A 32 mm. SAFETY RING 4X24 mm FOR 1/2" IMPACT SOCKETS SIZESFROM 15 TO 32 mm

Art.263.2 15-32 --- 10

Art. 272.MA


PROLUNGA ATTACCO 1/2" USCITA 3/8" TIPO MAC-CHINA AD ALTE PRESTAZIONI, REALIZZATA IN AC-CIAIO AL CROMO MOLIBDENO FINITURAFOSFATATA, MISURA E LUNGHEZZA COME INDI-CATO IN TABELLA. 1/2" DRIVE EXIT 3/8" IMPACT EXTENSION BAR, MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEEL ,BLACK PHOSPHERATE FINISHED, SIZE AND LENGHT AS RE-PORTED ON THE CHART

Art.272.MA75 75 1

272.MA150 150 1

Art. 272.M


PROLUNGA INGRESSO/USCITA 1/2" TIPO MACCHINAAD ALTE PRESTAZIONI, REALIZZATA IN ACCIAIO ALCROMO MOLIBDENO FINITURA FOSFATATA, SI-STEMA DI AGGANCIO E LUNGHEZZA COME INDI-CATO IN TABELLA.

1/2" IN/OUT IMPACT EXTENSION BAR, MADE IN CHROMEMOLYBDENUM HIGH PERFORMANCE STEEL , BLACK PHO-SPHERATE FINISHED, LOCKING SYSTEM AND LENGHT ASREPORTED ON THE CHART

Art.272.M75 75 1272.M125 125 1272.M250 250 1

Art. 280.M


SNODO CARDANICO 1/2" TIPO MACCHINA AD ALTEPRESTAZIONI IN ACCIAIO AL CROMO MOLIBDENO, FI-NITURA FOSFATATA. 1/2" IMPACT UNIVERSAL JOINT IN CHROME MOLYBDENUMHIGH PERFORMANCE STEEL , BLACK PHOSPHERATE FINISHE

Art.280.M1/2 1/2"-1/2" 76 1

Art. 284.M


RACCORDO AUMENTATORE DA 1/2" A 3/4" AD ALTEPRESTAZIONI IN ACCIAIO AL CROMO MOLIBDENOFINITURA FOSFATATA, TIPO MACCHINA. INCREASING ADAPTER FROM 1/2" TO 3/4" FOR IMPACTSOCKETS, IN CHROME MOLYBDENUM HIGH PERFOR-MANCE STEEL , BLACK PHOSPHERATE FINISHED

Art.284.M 1/2"-3/4" 49 1

Art. 234.M


BUSSOLA 3/4" ESAGONALE TIPO MACCHINA, CONPROFILO OGIVALE AD ALTE PRESTAZIONI, REALIZ-ZATA IN ACCIAIO AL CROMO MOLIBDENO FINITURAFOSFATATA, MISURA E LUNGHEZZA COME INDI-CATO IN TABELLA . 3/4" IMPACT HEXAGON SOCKET MADE IN CHROME MO-

LYBDENUM HIGH PERFORMANCE STEEL WITH OGIVALPROFILE, BLACK PHOSPHERATE FINISHED, SIZE ANDLENGHT AS REPORTED ON THE CHART

Art.234.M17 17 51 1234.M18 18 51 1234.M19 19 51 1234.M20 20 51 1234.M21 21 51 1234.M22 22 51 1234.M23 23 51 1234.M24 24 51 1234.M25 25 51 1234.M26 26 51 1234.M27 27 54 1234.M28 28 54 1234.M29 29 54 1234.M30 30 54 1234.M32 32 57 1234.M33 33 57 1234.M34 34 57 1234.M35 35 57 1234.M36 36 57 1234.M37 37 57 1234.M38 38 57 1234.M41 41 58 1234.M42 42 58 1234.M46 46 63 1234.M50 50 70 1234.M55 55 75 1234.M60 60 80 1

Art. 234.ML


BUSSOLA 3/4" ESAGONALE TIPO MACCHINA LUNGAAD ALTE PRESTAZIONI CON PROFILO OGIVALE , REA-LIZZATA IN ACCIAIO AL CROMO MOLIBDENO FINI-TURA FOSFATATA, MISURA E LUNGHEZZA COMEINDICATO IN TABELLA. 3/4" HEXAGON LONG IMPACT SOCKET, MADE IN CHROMEMOLYBDENUM HIGH PERFORMANCE STEEL WITH OGIVALPROFILE, BLACK PHOSPHERATE FINISHED, SIZE ANDLENGHT AS REPORTED ON THE CHART

Art.234.ML17 17 100 1234.ML18 18 100 1234.ML19 19 100 1234.ML20 20 100 1234.ML21 21 100 1234.ML22 22 100 1234.ML23 23 100 1234.ML24 24 100 1234.ML25 25 100 1234.ML26 26 100 1234.ML27 27 100 1234.ML28 28 100 1234.ML29 29 100 1234.ML30 30 100 1234.ML32 32 100 1234.ML33 33 100 1234.ML34 34 100 1234.ML35 35 100 1234.ML36 36 100 1

Art.234.ML37 37 100 1234.ML38 38 100 1234.ML41 41 100 1234.ML42 42 100 1234.ML46 46 105 1

Art. 234.M”


BUSSOLA 3/4" ESAGONALE IN POLLICI TIPO MAC-CHINA, CON PROFILO OGIVALE AD ALTE PRESTA-ZIONI, REALIZZATA IN ACCIAIO AL CROMOMOLIBDENO FINITURA FOSFATATA, MISURA E LUN-GHEZZA COME INDICATO IN TABELLA . 3/4" IMPACT HEXAGON SOCKET IN INCHES, MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEELWITH OGIVAL PROFILE, BLACK PHOSPHERATE FINISHED,SIZE AND LENGHT AS REPORTED ON THE CHART

Art.234.M11/16 11/16" 51 1234.M3/4 3/4" 51 1234.M13/16 13/16" 51 1234.M7/8 7/8" 51 1234.M15/16 15/16" 51 1234.M1 1" 51 1234.M1-1/16 1+1/16" 54 1234.M1-1/8 1+1/8" 54 1234.M1-3/16 1+3/16" 54 1234.M1-1/4 1+1/4" 57 1234.M1-5/16 1+5/16" 57 1234.M1-3/8 1+3/8" 57 1234.M1-7/16 1+7/16" 57 1234.M1-1/2 1+1/2" 57 1234.M1-9/16 1+9/16" 57 1234.M1-5/8 1+5/8" 58 1234.M1-11/16 1+11/16" 58 1234.M1-3/4 1+3/4" 63 1234.M1-13/16 1+13/16" 63 1234.M1-7/8 1+7/8" 63 1234.M2 2" 70 1234.M2-3/8 2+3/8" 80 1

Art. 234.ML”


BUSSOLA 3/4" ESAGONALE IN POLLICI TIPO MAC-CHINA LUNGA AD ALTE PRESTAZIONI CON PROFILOOGIVALE , REALIZZATA IN ACCIAIO AL CROMO MO-LIBDENO FINITURA FOSFATATA, MISURA E LUN-GHEZZA COME INDICATO IN TABELLA.3/4" HEXAGON LONG IMPACT SOCKET IN INCHES , MADEIN CHROME MOLYBDENUM HIGH PERFORMANCE STEEL

WITH OGIVAL PROFILE, BLACK PHOSPHERATE FINISHED,SIZE AND LENGHT AS REPORTED ON THE CHART

Art.234.ML11/16 11/16" 100 1234.ML3/4 3/4" 100 1234.ML13/16 13/16" 100 1234.ML7/8 7/8" 100 1234.ML15/16 15/16" 100 1234.ML1 1" 100 1234.ML1-1/16 1+1/16" 100 1234.ML1-1/8 1+1/8" 100 1234.ML1-3/16 1+3/16" 100 1234.ML1-1/4 1+1/4" 100 1234.ML1-5/16 1+5/16" 100 1234.ML1-3/8 1+3/8" 100 1234.ML1-7/16 1+7/16" 100 1234.ML1-1/2 1+1/2" 100 1234.ML1-9/16 1+9/16" 100 1234.ML1-5/8 1+5/8" 100 1234.ML1-11/16 1+11/16" 100 1234.ML1-3/4 1+3/4" 105 1234.ML1-13/16 1+13/16" 105 1

Art. 234.MLS


BUSSOLA 3/4" ESAGONALE CON PARETI EXTRA-SOT-TILI, TIPO MACCHINA LUNGA AD ALTE PRESTAZIONICON PROFILO OGIVALE , REALIZZATA IN ACCIAIO ALCROMO MOLIBDENO FINITURA FOSFATATA, MI-SURA E LUNGHEZZA COME INDICATO IN TABELLA.3/4" EXTRA-THIN WALL, HEXAGON LONG IMPACT SOC-KET, MADE IN CHROME MOLYBDENUM HIGH PERFOR-MANCE STEEL WITH OGIVAL PROFILE, BLACKPHOSPHERATE FINISHED, SIZE AND LENGHT AS REPORTEDON THE CHART

Art.234.MLS22 22 100 1234.MLS24 24 100 1234.MLS27 27 100 1234.MLS30 30 100 1234.MLS32 32 100 1234.MLS33 33 100 1234.MLS34 34 100 1234.MLS36 36 100 1

Art. 234.MLS”


BUSSOLA 3/4" ESAGONALE IN POLLICI CON PARETIEXTRA-SOTTILI, TIPO MACCHINA LUNGA AD ALTEPRESTAZIONI CON PROFILO OGIVALE , REALIZZATA


CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

226



CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

2 27


IN ACCIAIO AL CROMO MOLIBDENO FINITURA FO-SFATATA, MISURA E LUNGHEZZA COME INDICATOIN TABELLA. 3/4" EXTRA-THIN WALL, HEXAGON LONG IMPACT SOC-KET IN INCHES , MADE IN CHROME MOLYBDENUM HIGHPERFORMANCE STEEL WITH OGIVAL PROFILE, BLACKPHOSPHERATE FINISHED, SIZE AND LENGHT AS REPORTEDON THE CHART

Art.234.MLS7/8 7/8" 100 1234.MLS15/16 15/16" 100 1234.MLS1-1/16 1+1/16" 100 1234.MLS1-3/16 1+3/16" 100 1234.MLS1-1/4 1+1/4" 100 1234.MLS1-5/16 1+5/16" 100 1

Art. 234.MC


BUSSOLA TIPO MACCHINA 3/4" AD ALTE PRESTA-ZIONI PER VITI CON ESAGONO INCASSATO , IN AC-CIAIO AL CROMO MOLIBDENO CON FINITURAFOSFATATA, INSERTO ESAGONALE SOSTITUIBILE,MISURA E LUNGHEZZA TOTALE COME INDICATO INTABELLA .3/4" IMPACT SOCKET FOR ALLEN SCREWS MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEELWITH INTERCHANGEABLE BIT, BLACK PHOSPHERATE FI-NISH, SIZE AND TOTAL LENGHT AS REPORTED ON THECHART

Art.234.MC12 12 51 1234.MC14 14 51 1234.MC17 17 54 1234.MC19 19 54 1234.MC22 22 54 1234.MC24 24 54 1

Art. 234.RMC


INSERTO ESAGONALE DI RICAMBIO 3/4" PER BUS-SOLA TIPO MACCHINA ART. 234.MC, FORNITO CONSPINA DI FISSAGGIO, MISURA COME INDICATO INTABELLA.3/4" SPARE PART BIT FOR IMPACT SOCKET ART. 234.MCWITH REPLACEMENT PIN, SIZE AS REPORTED ON THECHART

Art.234.RMC12 12 35 1234.RMC14 14 35 1

Art.234.RMC17 17 50 1234.RMC19 19 50 1234.RMC22 22 50 1234.RMC24 24 50 1

Art. 261.3



Art.261.3 19-32 --- 10

Art. 261.4



Art.261.4 33-46 --- 10

Art. 263.3



Art.263.3 17-50 --- 10

Art. 263.4



Art.263.4 54-60 --- 10

Art. 275.MA175


PROLUNGA ATTACCO 3/4" USCITA 1/2" TIPO MAC-CHINA AD ALTE PRESTAZIONI, REALIZZATA IN AC-CIAIO AL CROMO MOLIBDENO FINITURAFOSFATATA, MISURA E LUNGHEZZA COME INDI-CATO IN TABELLA.3/4" DRIVE EXIT 1/2" IMPACT EXTENSION BAR, MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEEL ,BLACK PHOSPHERATE FINISHED, SIZE AND LENGHT AS RE-PORTED ON THE CHART

Art.275.MA175 175 1

Art. 275.M


PROLUNGA INGRESSO/USCITA 3/4" TIPO MACCHINAAD ALTE PRESTAZIONI, REALIZZATA IN ACCIAIO ALCROMO MOLIBDENO FINITURA FOSFATATA, SISTEMADI AGGANCIO E LUNGHEZZA COME INDICATO IN TA-BELLA. 3/4" IN/OUT IMPACT EXTENSION BAR, MADE IN CHROMEMOLYBDENUM HIGH PERFORMANCE STEEL , BLACK PHO-SPHERATE FINISHED, LOCKING SYSTEM AND LENGHT AS RE-PORTED ON THE CHART

Art.275.M100 100 1275.M175 175 1275.M250 250 1275.M330 330 1

Art. 280.M3/4


SNODO CARDANICO 3/4" TIPO MACCHINA AD ALTEPRESTAZIONI IN ACCIAIO AL CROMO MOLIBDENO, FI-NITURA FOSFATATA. 3/4" IMPACT UNIVERSAL JOINT IN CHROME MOLYBDENUMHIGH PERFORMANCE STEEL , BLACK PHOSPHERATE FINISHED

Art.280.M3/4 3/4"-3/4" 90 1

Art. 287.M


RACCORDO RIDUTTORE DA 3/4" A 1/2" AD ALTEPRESTAZIONI TORSIONE MASSIMA 512 Nm, IN AC-CIAIO AL CROMO MOLIBDENO FINITURA FOSFA-TATA, TIPO MACCHINA. REDUCING ADAPTER FROM 3/4" TO 1/2" FOR IMPACTSOCKETS, IN CHROME MOLYBDENUM HIGH PERFOR-MANCE STEEL MAX TORQUE 512 Nm, BLACK PHOSPHE-RATE FINISHED

Art.287.M 3/4"-1/2" 56 1

Art. 287.MA


RACCORDO RIDUTTORE DA 3/4" A 5/8" AD ALTEPRESTAZIONI TORSIONE MASSIMA 512 Nm, IN AC-CIAIO AL CROMO MOLIBDENO FINITURA FOSFA-TATA, TIPO MACCHINA. REDUCING ADAPTER FROM 3/4" TO 5/8" FOR IMPACTSOCKETS, IN CHROME MOLYBDENUM HIGH PERFOR-MANCE STEEL MAX TORQUE 512 Nm, BLACK PHOSPHE-RATE FINISHED

Art.287.MA 3/4"-5/8" 70 1

Art. 286.M


RACCORDO AUMENTATORE DA 3/4" A 1" AD ALTEPRESTAZIONI TORSIONE MASSIMA 512 Nm, IN AC-CIAIO AL CROMO MOLIBDENO FINITURA FOSFA-TATA, TIPO MACCHINA.INCREASING ADAPTER FROM 3/4" TO 1" FOR IMPACTSOCKETS, IN CHROME MOLYBDENUM HIGH PERFOR-MANCE STEEL MAX TORQUE 512 Nm, BLACK PHOSPHE-RATE FINISHED

Art.286.M 3/4"-1" 70 1

Art. 211.M


BUSSOLA TIPO MACCHINA 1" ESAGONALE OGI-VALE AD ALTE PRESTAZIONI, IN ACCIAIO AL CROMOMOLIBDENO FINITURA FOSFATATA, MISURA E LUN-GHEZZA COME INDICATO IN TABELLA . 1" IMPACT HEXAGON SOCKET IN CHROME MOLYBDE-NUM HIGH PERFORMANCE STEEL WITH OGIVAL PROFILE,BLACK PHOSPHERATE FINISHED, SIZE AND LENGHT AS RE-PORTED ON THE CHART

Art.211.M19 19 58 1211.M20 20 58 1211.M21 21 60 1211.M22 22 60 1211.M23 23 60 1211.M24 24 60 1211.M25 25 60 1211.M26 26 60 1211.M27 27 60 1211.M28 28 60 1211.M29 29 60 1211.M30 30 62 1211.M32 32 63 1211.M33 33 63 1211.M34 34 63 1211.M35 35 63 1211.M36 36 67 1211.M37 37 67 1211.M38 38 67 1211.M41 41 68 1211.M42 42 70 1211.M46 46 76 1211.M47 47 76 1211.M50 50 82 1211.M52 52 82 1

Art.211.M54 54 82 1211.M55 55 87 1211.M56 56 87 1211.M58 58 87 1211.M60 60 91 1211.M65 65 95 1211.M70 70 100 1211.M75 75 104 1211.M80 80 108 1211.M85 85 110 1211.M90 90 112 1211.M95 95 115 1211.M100 100 115 1

Art. 211.ML


BUSSOLA 1" ESAGONALE TIPO MACCHINA LUNGAAD ALTE PRESTAZIONI CON PROFILO OGIVALE , REA-LIZZATA IN ACCIAIO AL CROMO MOLIBDENO FINI-TURA FOSFATATA, MISURA E LUNGHEZZA COMEINDICATO IN TABELLA. 1" HEXAGON LONG IMPACT SOCKET, MADE IN CHROMEMOLYBDENUM HIGH PERFORMANCE STEEL WITH OGIVALPROFILE, BLACK PHOSPHERATE FINISHED, SIZE ANDLENGHT AS REPORTED ON THE CHART

Art.211.ML19 19 110 1211.ML20 20 110 1211.ML21 21 110 1211.ML22 22 110 1211.ML23 23 110 1211.ML24 24 110 1211.ML25 25 110 1211.ML26 26 110 1211.ML27 27 110 1211.ML28 28 110 1211.ML29 29 110 1211.ML30 30 110 1211.ML32 32 110 1211.ML33 33 110 1211.ML34 34 110 1211.ML35 35 110 1211.ML36 36 110 1211.ML37 37 110 1211.ML38 38 110 1211.ML41 41 110 1211.ML42 42 110 1211.ML46 46 110 1211.ML47 47 110 1211.ML50 50 115 1211.ML52 52 115 1211.ML54 54 115 1211.ML55 55 115 1211.ML56 56 115 1211.ML58 58 115 1211.ML60 60 120 1211.ML65 65 125 1211.ML70 70 130 1211.ML80 80 130 1


CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

228



CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

2 29


Art. 211.M”


BUSSOLA 1" ESAGONALE IN POLLICI TIPO MAC-CHINA, CON PROFILO OGIVALE AD ALTE PRESTA-ZIONI, REALIZZATA IN ACCIAIO AL CROMOMOLIBDENO FINITURA FOSFATATA, MISURA E LUN-GHEZZA COME INDICATO IN TABELLA .1" IMPACT HEXAGON SOCKET IN INCHES, MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEELWITH OGIVAL PROFILE, BLACK PHOSPHERATE FINISHED,SIZE AND LENGHT AS REPORTED ON THE CHART

Art.211.M3/4 3/4" 58 1211.M13/16 13/16" 60 1211.M7/8 7/8" 60 1211.M15/16 15/16" 60 1211.M1 1" 60 1211.M1-1/16 1-1+16" 60 1211.M1-1/8 1+1/8" 60 1211.M1-3/16 1+3/16" 62 1211.M1-1/4 1+1/4" 63 1211.M1-5/16 1+5/16" 63 1211.M1-3/8 1+3/8" 63 1211.M1-7/16 1+7/16" 67 1211.M1-1/2 1+1/12" 67 1211.M1-9/16 1+9/16" 70 1211.M1-5/8 1+5/8" 70 1211.M1-11/16 1+11/16" 70 1211.M1-3/4 1+3/4" 76 1211.M1-13/16 1+3/16" 76 1211.M1-7/8 1+7/8" 76 1211.M1-15/16 1+15/16" 82 1211.M2 2" 82 1211.M2-1/16 2+1/16" 82 1211.M2-1/8 2+1/8" 82 1211.M2-3/16 2+3/16" 87 1211.M2-1/4 2+1/4" 87 1211.M2-3/8 2+3/8" 91 1211.M2-7/16 2+7/16" 91 1211.M2-1/2 2+1/2" 95 1211.M2-9/16 2+9/16" 95 1211.M2-5/8 2+5/8" 95 1211.M2-3/4 2+3/4" 100 1211.M2-13/16 2+13/16" 100 1211.M2-7/8 2+7/8" 104 1211.M2-15/16 2+15/16" 104 1211.M3 3" 104 1211.M3-1/8 3+1/8" 108 1211.M3-1/4 3+1/4" 110 1211.M3-3/8 3+3/8" 110 1211.M3-1/2 3+1/2" 112 1211.M3-3/4 3+3/4" 115 1

Art. 211.ML”


BUSSOLA 1" ESAGONALE IN POLLICI TIPO MAC-CHINA LUNGA AD ALTE PRESTAZIONI CON PROFILOOGIVALE , REALIZZATA IN ACCIAIO AL CROMO MO-LIBDENO FINITURA FOSFATATA, MISURA E LUN-GHEZZA COME INDICATO IN TABELLA.1" LONG HEXAGON IMPACT SOCKET IN INCHES , MADEIN CHROME MOLYBDENUM HIGH PERFORMANCE STEELWITH OGIVAL PROFILE, BLACK PHOSPHERATE FINISHED,SIZE AND LENGHT AS REPORTED ON THE CHART

Art.211.ML3/4 3/4" 110 1211.ML13/16 13/16" 110 1211.ML7/8 7/8" 110 1211.ML15/16 15/16" 110 1211.ML1 1" 110 1211.ML1-1/16 1-1+16" 110 1211.ML1-1/8 1+1/8" 110 1211.ML1-3/16 1+3/16" 110 1211.ML1-1/4 1+1/4" 110 1211.M1L-5/16 1+5/16" 110 1211.ML1-3/8 1+3/8" 110 1211.ML1-7/16 1+7/16" 110 1211.ML1-1/2 1+1/12" 110 1211.ML1-9/16 1+9/16" 110 1211.ML1-5/8 1+5/8" 110 1211.ML1-11/16 1+11/16" 110 1211.ML1-3/4 1+3/4" 110 1211.ML1-13/16 1+3/16" 110 1211.ML1-7/8 1+7/8" 110 1211.ML1-15/16 1+15/16" 115 1211.ML2 2" 115 1211.ML2-1/16 2+1/16" 115 1211.ML2-1/8 2+1/8" 115 1211.ML2-3/16 2+3/16" 115 1211.ML2-1/4 2+1/4" 115 1211.ML2-3/8 2+3/8" 120 1211.ML2-7/16 2+7/16" 120 1211.ML2-1/2 2+1/2" 125 1211.ML2-9/16 2+9/16" 125 1211.ML2-5/8 2+5/8" 125 1211.ML2-3/4 2+3/4" 130 1

Art. 211.MLS


BUSSOLA 1" ESAGONALE CON PARETI EXTRA-SOT-TILI, TIPO MACCHINA LUNGA AD ALTE PRESTAZIONICON PROFILO OGIVALE , REALIZZATA IN ACCIAIO ALCROMO MOLIBDENO FINITURA FOSFATATA, MI-SURA E LUNGHEZZA COME INDICATO IN TABELLA. 1" EXTRA-THIN WALL, HEXAGON LONG IMPACT SOCKET,MADE IN CHROME MOLYBDENUM HIGH PERFORMANCESTEEL WITH OGIVAL PROFILE, BLACK PHOSPHERATE FINI-SHED, SIZE AND LENGHT AS REPORTED ON THE CHART

Art.211.MLS24 24 110 1211.MLS27 27 110 1211.MLS30 30 110 1

Art.211.MLS32 32 110 1211.MLS33 33 110 1211.MLS34 34 110 1211.MLS36 36 110 1211.MLS38 38 110 1211.MLS41 41 110 1

Art. 211.MLS”


BUSSOLA 1" ESAGONALE IN POLLICI CON PARETIEXTRA-SOTTILI, TIPO MACCHINA LUNGA AD ALTEPRESTAZIONI CON PROFILO OGIVALE , REALIZZATAIN ACCIAIO AL CROMO MOLIBDENO FINITURA FO-SFATATA, MISURA E LUNGHEZZA COME INDICATOIN TABELLA. 1" EXTRA-THIN WALL, HEXAGON LONG IMPACT SOCKETIN INCHES , MADE IN CHROME MOLYBDENUM HIGH PER-FORMANCE STEEL WITH OGIVAL PROFILE, BLACK PHO-SPHERATE FINISHED, SIZE AND LENGHT AS REPORTED ONTHE CHART

Art.211.MLS15/16 15/16" 110 1211.MLS1-1/16 1+1/16" 110 1211.MLS1-3/16 1+3/16" 110 1211.MLS1-1/4 1+1/4" 110 1211.MLS1-5/16 1+5/16" 110 1211.MLS1-1/2 1+1/2" 110 1211.MLS1-5/8 1+5/8" 110 1

Art. 211.MC


BUSSOLA TIPO MACCHINA 1" AD ALTE PRESTAZIONIPER VITI CON ESAGONO INCASSATO , IN ACCIAIO ALCROMO MOLIBDENO CON FINITURA FOSFATATA,INSERTO ESAGONALE SOSTITUIBILE, MISURA E LUN-GHEZZA TOTALE COME INDICATO IN TABELLA .1" IMPACT SOCKET FOR ALLEN SCREWS MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEELWITH INTERCHANGEABLE BIT, BLACK PHOSPHERATE FI-NISH, SIZE AND TOTAL LENGHT AS REPORTED ON THECHART

Art.211.MC12 12 77 1211.MC14 14 77 1211.MC17 17 88 1

Art.211.MC19 19 88 1211.MC22 22 88 1211.MC24 24 88 1211.MC27 27 110 1211.MC30 30 114 1211.MC32 32 116 1211.MC36 36 120 1

Art. 211.RMC


INSERTO ESAGONALE DI RICAMBIO 1" PER BUS-SOLA TIPO MACCHINA ART. 211.MC, FORNITO CONSPINA DI FISSAGGIO, MISURA COME INDICATO INTABELLA.1" SPARE PART BIT FOR IMPACT SOCKET ART. 211.MCWITH REPLACEMENT PIN, SIZE AS REPORTED ON THECHART

Art.211.RMC12 12 35 1211.RMC14 14 35 1211.RMC17 17 50 1211.RMC19 19 50 1211.RMC22 22 50 1211.RMC24 24 50 1211.RMC27 27 72 1211.RMC30 30 76 1211.RMC32 32 78 1211.RMC36 36 82 1

Art. 261.5


SPINA DI TENUTA 5x43mm PER BUSSOLE ATTACCODA 1" TIPO MACCHINA MISURA DA 41 A 65 mm. LOCK PIN 5X43 mm FOR 1" IMPACT SOCKETS SIZES FROM41 TO 65 mm

Art.261.5 41-65 --- 5

Art. 261.6


SPINA DI TENUTA 5x50mm PER BUSSOLE ATTACCO DA 1"TIPO MACCHINA MISURA ESAGONO DA 70 A 90 mm.LOCK PIN 5X50 mm FOR 1" IMPACT SOCKETS HEXAGONSIZE FROM 70 TO 90 mm

Art.261.6 70-90 50x5 5

Art. 261.7


SPINA DI TENUTA 6x75mm PER BUSSOLE ATTACCODA 1" TIPO MACCHINA MISURA ESAGONO DA 95 A100 mm E PER BUSSOLE 1+1/2" ESAGONO DA 30 A90 mm.LOCK PIN 6X75 mm FOR 1" IMPACT SOCKETS HEXAGONSIZE FROM 95 TO 100 mm AND FOR 1+1/2" IMPACT SOC-KETS SIZE FROM 30 TO 90 mm

Art.261.7 95-100 75x6 5

Art. 263.5


ANELLO ELASTICO DI SICUREZZA PER BUSSOLE ATTACCODA 1" TIPO MACCHINA MISURA DA 41 A 65 mm. SAFETY RING FOR 1" IMPACT SOCKETS SIZES FROM 41 TO 65 mm

Art.263.5 19-65 45x6 5

Art. 263.6


ANELLO ELASTICO DI SICUREZZA Ø 48x6mm PERBUSSOLE ATTACCO DA 1" TIPO MACCHINA MISURAESAGONO DA 70 A 90 mm.

SAFETY RING Ø 48x6mm FOR 1" IMPACT SOCKETS HEXA-GON SIZE FROM 70 TO 90 mm

Art.263.6 70-90 48x6 5

Art. 263.7


ANELLO ELASTICO DI SICUREZZA Ø 75x7mm PERBUSSOLE ATTACCO DA 1" TIPO MACCHINA MISURAESAGONO DA 95 A 100 mm E PER BUSSOLE 1+1/2"MISURA DA 30 A 90 mm. SAFETY RING Ø 75x7mm FOR 1" IMPACT SOCKETS HEXA-GON SIZE FROM 95 TO 100 mm AND FOR SOCKETS 1+1/2"SIZE FROM 30 TO 90 mm

Art.263.7 95-100 75x7 5

Art. 276.MA175


PROLUNGA ATTACCO 1" USCITA 3/4" TIPO MAC-CHINA AD ALTE PRESTAZIONI, REALIZZATA IN AC-CIAIO AL CROMO MOLIBDENO FINITURAFOSFATATA, SISTEMA DI AGGANCIO E LUNGHEZZACOME INDICATO IN TABELLA.1" DRIVE EXIT 3/4" IMPACT EXTENSION BAR, MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEEL ,BLACK PHOSPHERATE FINISHED, LOCKING SYSTEM ANDLENGHT AS REPORTED ON THE CHART

Art.276.MA175 175 1

Art. 276.M175


PROLUNGA INGRESSO/USCITA 1" TIPO MACCHINAAD ALTE PRESTAZIONI, REALIZZATA IN ACCIAIO ALCROMO MOLIBDENO FINITURA FOSFATATA, SI-STEMA DI AGGANCIO E LUNGHEZZA COME INDI-CATO IN TABELLA. 1" IN/OUT IMPACT EXTENSION BAR, MADE IN CHROMEMOLYBDENUM HIGH PERFORMANCE STEEL , BLACK PHO-


CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

230



CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

2 31


SPHERATE FINISHED, LOCKING SYSTEM AND LENGHT ASREPORTED ON THE CHART

Art.276.M175 175 1

Art. 276.M


PROLUNGA 1" TIPO MACCHINA AD ALTE PRESTA-ZIONI IN ACCIAIO AL CROMO MOLIBDENO, FINI-TURA FOSFATATA. 1" IMPACT EXTENSION BAR IN CHROME MOLYBDENUM HIGHPERFORMANCE STEEL , BLACK PHOSPHERATE FINISHED

Art.276.M250 1"-1" 250 1276.M330 1"-1" 330 1

Art. 280.M1


SNODO CARDANICO 1" TIPO MACCHINA AD ALTEPRESTAZIONI IN ACCIAIO AL CROMO MOLIBDENO,FINITURA FOSFATATA. 1" IMPACT UNIVERSAL JOINT IN CHROME MOLYBDENUMHIGH PERFORMANCE STEEL , BLACK PHOSPHERATE FINISHED

Art.280.M1 1"-1" 110 1

Art. 288.M


RACCORDO RIDUTTORE DA 1" A 3/4" AD ALTE PRE-STAZIONI TORSIONE MASSIMA 1412 Nm, IN ACCIAIOAL CROMO MOLIBDENO FINITURA FOSFATATA, TIPOMACCHINA. REDUCING ADAPTER FROM 1" TO 3/4" FOR IMPACT SOCKETS,IN CHROME MOLYBDENUM HIGH PERFORMANCE STEEL MAXTORQUE 1412 Nm, BLACK PHOSPHERATE FINISHED

Art.288.M 1"-3/4" 65 1

Art. 289.M


RACCORDO AUMENTATORE TIPO MACCHINA DA 1"A 1+1/2" AD ALTE PRESTAZIONI TORSIONE MAS-SIMA 1412 Nm, IN ACCIAIO AL CROMO MOLIBDENOFINITURA FOSFATATA.INCREASING ADAPTER FROM 1" TO 1+1/2" FOR IMPACTSOCKETS, IN CHROME MOLYBDENUM HIGH PERFOR-MANCE STEEL MAX TORQUE 1412 Nm, BLACK PHOSPHE-RATE FINISHED

Art.289.M 1"-1+1/2" 85 1

Art. 215.M


BUSSOLA TIPO MACCHINA 1+1/2" ESAGONALE OGI-VALE AD ALTE PRESTAZIONI, IN ACCIAIO AL CROMOMOLIBDENO FINITURA FOSFATATA, MISURA E LUN-GHEZZA COME INDICATO IN TABELLA . 1+1/2" IMPACT HEXAGON SOCKET IN CHROME MOLYB-DENUM HIGH PERFORMANCE STEEL WITH OGIVAL PRO-FILE, BLACK PHOSPHERATE FINISHED, SIZE AND LENGHTAS REPORTED ON THE CHART

Art.215.M30 30 74 1215.M32 32 76 1215.M34 34 76 1215.M36 36 78 1215.M38 38 79 1215.M41 41 80 1215.M46 46 84 1215.M50 50 87 1215.M54 54 90 1215.M55 55 90 1215.M60 60 95 1215.M65 65 100 1215.M70 70 105 1215.M75 75 110 1215.M80 80 116 1215.M85 85 121 1215.M90 90 127 1215.M95 95 127 1215.M100 100 129 1215.M105 105 135 1215.M110 110 140 1215.M115 115 140 1215.M120 120 143 1215.M125 125 146 1215.M130 130 149 1

Art. 215.ML


BUSSOLA 1+1/2" ESAGONALE TIPO MACCHINALUNGA AD ALTE PRESTAZIONI CON PROFILO OGI-VALE , REALIZZATA IN ACCIAIO AL CROMO MOLIB-DENO FINITURA FOSFATATA, MISURA E LUNGHEZZACOME INDICATO IN TABELLA. 1+1/2" HEXAGON LONG IMPACT SOCKET, MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEELWITH OGIVAL PROFILE, BLACK PHOSPHERATE FINISHED,SIZE AND LENGHT AS REPORTED ON THE CHART

Art.215.ML30 30 110 1215.ML32 32 113 1215.ML34 34 113 1215.ML36 36 116 1215.ML38 38 118 1215.ML41 41 120 1215.ML46 46 126 1215.ML50 50 130 1215.ML55 55 135 1215.ML60 60 143 1215.ML65 65 150 1215.ML70 70 157 1215.ML75 75 165 1215.ML80 80 174 1215.ML85 85 180 1215.ML90 90 184 1215.ML95 95 190 1215.ML100 100 193 1215.ML105 105 202 1215.ML110 110 210 1215.ML115 115 210 1215.ML120 120 214 1215.ML125 125 219 1215.ML130 130 224 1

Art. 215.M”


BUSSOLA 1+1/2" ESAGONALE IN POLLICI TIPO MACCHINA,CON PROFILO OGIVALE AD ALTE PRESTAZIONI, REALIZZATAIN ACCIAIO AL CROMO MOLIBDENO FINITURA FOSFATATA,MISURA E LUNGHEZZA COME INDICATO IN TABELLA . 1+1/2" IMPACT HEXAGON SOCKET IN INCHES, MADE IN CHROME MO-LYBDENUM HIGH PERFORMANCE STEEL WITH OGIVAL PROFILE,BLACK PHOSPHERATE FINISHED, SIZE AND LENGHT AS REPORTED ONTHE CHART

Art.215.M1-3/16 1+3/16" 74 1215.M1-1/4 1+1/4" 76 1215.M1-5/16 1+5/16" 76 1

Art.215.M1-3/8 1+3/8" 78 1215.M1-7/16 1+7/16" 78 1215.M1-1/2 1+1/2" 79 1215.M1-9/16 1+9/16" 80 1215.M1-5/8 1+5/8" 80 1215.M1-11/16 1+11/16" 80 1215.M1-3/4 1+3/4" 84 1215.M1-13/16 1+13/16" 84 1215.M1-7/8 1+7/8" 84 1215.M2 2" 87 1215.M2-1/16 2+1/16" 87 1215.M2-1/8 2+1/8" 90 1215.M2-3/16 2+3/16" 90 1215.M2-1/4 2+1/4" 90 1215.M2-3/8 2+3/8" 95 1215.M2-7/16 2+7/16" 95 1215.M2-1/2 2+1/2" 100 1215.M2-9/16 2+9/16" 100 1215.M2-5/8 2+5/8" 100 1215.M2-3/4 2+3/4" 105 1215.M2-13/16 2+13/16" 105 1215.M2-15/16 2+15/16" 110 1215.M3 3" 110 1215.M3-1/8 3+1/8" 116 1215.M3-1/4 3+1/4" 121 1215.M3-3/8 3+3/8" 121 1215.M3-1/2 3+1/2" 127 1215.M3.3/4 3+3/4" 127 1215.M3-7/8 3+7/8" 129 1215.M4 4" 129 1215.M4-1/8 4+1/8" 135 1215.M4-1/4 4+1/4" 140 1215.M4-1/2 4+1/2" 140 1215.M4-5/8 4+5/8" 143 1215.M4-3/4 4+3/4" 143 1215.M5 5" 149 1215.M5-1/8 5+1/8" 149 1

Art. 215.ML”


BUSSOLA 1+1/2" ESAGONALE IN POLLICI TIPO MAC-CHINA LUNGA AD ALTE PRESTAZIONI CON PROFILOOGIVALE , REALIZZATA IN ACCIAIO AL CROMO MO-LIBDENO FINITURA FOSFATATA, MISURA E LUN-GHEZZA COME INDICATO IN TABELLA. 1+1/2" LONG HEXAGON IMPACT SOCKET IN INCHES ,MADE IN CHROME MOLYBDENUM HIGH PERFORMANCESTEEL WITH OGIVAL PROFILE, BLACK PHOSPHERATE FINI-SHED, SIZE AND LENGHT AS REPORTED ON THE CHART

Art.215.ML1-3/16 1+3/16" 110 1215.ML1-1/4 1+1/4" 113 1215.ML1-5/16 1+5/16" 113 1215.ML1-3/8 1+3/8" 116 1215.ML1-7/16 1+7/16" 116 1215.ML1-1/2 1+1/2" 118 1215.ML1-9/16 1+9/16" 120 1215.ML1-5/8 1+5/8" 120 1215.ML1-11/16 1+11/16" 120 1

Art.215.ML1-3/4 1+3/4" 126 1215.ML1-13/16 1+13/16" 126 1215.ML1-7/8 1+7/8" 126 1215.ML2 2" 130 1215.ML2-1/16 2+1/16" 130 1215.ML2-1/8 2+1/8" 135 1215.ML2-3/16 2+3/16" 135 1215.ML2-1/4 2+1/4" 135 1215.ML2-3/8 2+3/8" 143 1215.ML2-7/16 2+7/16" 143 1215.ML2-1/2 2+1/2" 150 1215.ML2-9/16 2+9/16" 150 1215.ML2-5/8 2+5/8" 150 1215.ML2-3/4 2+3/4" 157 1215.ML2-13/16 2+13/16" 157 1215.ML2-15/16 2+15/16" 165 1215.ML3 3" 165 1215.ML3-1/8 3+1/8" 174 1215.ML3-1/4 3+1/4" 180 1215.ML3-3/8 3+3/8" 180 1215.ML3-1/2 3+1/2" 184 1215.ML3.3/4 3+3/4" 190 1215.ML3-7/8 3+7/8" 193 1215.ML4 4" 193 1215.ML4-1/8 4+1/8" 202 1215.ML4-1/4 4+1/4" 210 1215.ML4-1/2 4+1/2" 210 1215.ML4-5/8 4+5/8" 214 1215.ML4-3/4 4+3/4" 214 1215.ML5 5" 224 1215.ML5-1/8 5+1/8" 224 1

Art. 215.MC


BUSSOLA TIPO MACCHINA 1+1/2" AD ALTE PRESTA-ZIONI PER VITI CON ESAGONO INCASSATO , IN AC-CIAIO AL CROMO MOLIBDENO CON FINITURAFOSFATATA, INSERTO ESAGONALE SOSTITUIBILE,MISURA E LUNGHEZZA TOTALE COME INDICATO INTABELLA . 1+1/2" IMPACT SOCKET FOR ALLEN SCREWS MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEELWITH INTERCHANGEABLE BIT, BLACK PHOSPHERATE FI-NISH, SIZE AND TOTAL LENGHT AS REPORTED ON THECHART

Art.215.MC27 27 124 1215.MC30 30 128 1215.MC32 32 130 1215.MC36 36 134 1215.MC41 41 140 1215.MC46 46 154 1215.RMC27 27 72 1215.RMC30 30 76 1215.RMC32 32 78 1215.RMC36 36 82 1215.RMC41 41 88 1215.RMC46 46 100 1

Art. 215.RMC


INSERTO ESAGONALE DI RICAMBIO 1+1/2" PER BUS-SOLA TIPO MACCHINA ART. 215.MC, FORNITO CONSPINA DI FISSAGGIO, MISURA COME INDICATO IN TA-BELLA.1+1/2" SPARE PART BIT FOR IMPACT SOCKET ART. 215.MCWITH REPLACEMENT PIN, SIZE AS REPORTED ON THE CHART

Art.215.RMC27 27 72 1215.RMC30 30 76 1215.RMC32 32 78 1215.RMC36 36 82 1215.RMC41 41 88 1215.RMC46 46 100 1

Art. 288.M215


RACCORDO RIDUTTORE TIPO MACCHINA DA 1+1/2"A 1" AD ALTE PRESTAZIONI TORSIONE MASSIMA1412 Nm, IN ACCIAIO AL CROMO MOLIBDENO FINI-TURA FOSFATATA.REDUCING ADAPTER FROM 1+1/2" TO 1" FOR IMPACTSOCKETS, IN CHROME MOLYBDENUM HIGH PERFOR-MANCE STEEL MAX TORQUE 1412 Nm, BLACK PHOSPHE-RATE FINISHED

Art.288.M215 1+1/2" - 1" 110 1

Art. 289.M215


RACCORDO AUMENTATORE TIPO MACCHINA DA1+1/2" A 2+1/2" AD ALTE PRESTAZIONI TORSIONEMASSIMA 1412 Nm, IN ACCIAIO AL CROMO MOLIB-DENO FINITURA FOSFATATA.INCREASING ADAPTER FROM 1+1/2" TO 2+1/2" FOR IM-PACT SOCKETS, IN CHROME MOLYBDENUM HIGH PER-FORMANCE STEEL MAX TORQUE 1412 Nm, BLACKPHOSPHERATE FINISHED

Art.289.M215 1+1/2" - 2+1/2" 128 1


CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

232



CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

2 33


Art. 291.M


PROLUNGA INGRESSO/USCITA 1+1/2" TIPO MAC-CHINA AD ALTE PRESTAZIONI, REALIZZATA IN AC-CIAIO AL CROMO MOLIBDENO FINITURAFOSFATATA, SISTEMA DI AGGANCIO E LUNGHEZZACOME INDICATO IN TABELLA.1+1/2" IN/OUT IMPACT EXTENSION BAR, MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEEL ,BLACK PHOSPHERATE FINISHED, LOCKING SYSTEM ANDLENGHT AS REPORTED ON THE CHART

Art.291.M250 250 1291.M380 380 1291.M455 455 1

Art. 280.M215


SNODO CARDANICO 1+1/2" TIPO MACCHINA ADALTE PRESTAZIONI IN ACCIAIO AL CROMO MOLIB-DENO, FINITURA FOSFATATA.1+1/2" IMPACT UNIVERSAL JOINT IN CHROME MOLYBDE-NUM HIGH PERFORMANCE STEEL , BLACK PHOSPHERATEFINISHED

Art.280.M215 1+1/2" - 1+!/2" 168 1

Art. 261.10


SPINA DI TENUTA 6x85 mm PER BUSSOLE ATTACCODA 1+1/2" TIPO MACCHINA MISURA ESAGONO DA95 A 130 mm.LOCK PIN 6X85 mm FOR 1+1/2" IMPACT SOCKETS HEXA-GON SIZE FROM 95 TO 130 mm

Art.261.10 95-130 85x6 5

Art. 263.10


ANELLO ELASTICO DI SICUREZZA Ø 85x7 mm PERBUSSOLE ATTACCO DA 1+1/2" TIPO MACCHINA MI-SURA ESAGONO DA 95 A 130 mm. SAFETY RING Ø 85x7mm FOR 1+1/2" IMPACT SOCKETS HE-XAGON SIZE FROM 95 TO 130 mm

Art.263.10 95-130 85x7 5

Art. 225.M


BUSSOLA TIPO MACCHINA 2+1/2" ESAGONALE OGI-VALE AD ALTE PRESTAZIONI, IN ACCIAIO AL CROMOMOLIBDENO FINITURA FOSFATATA, MISURA E LUN-GHEZZA COME INDICATO IN TABELLA . 2+1/2" IMPACT HEXAGON SOCKET IN CHROME MOLYB-DENUM HIGH PERFORMANCE STEEL WITH OGIVAL PRO-FILE, BLACK PHOSPHERATE FINISHED, SIZE AND LENGHTAS REPORTED ON THE CHART

Art.225.M65 65 138 1225.M70 70 140 1225.M75 75 143 1225.M80 80 150 1225.M85 85 155 1225.M90 90 160 1225.M95 95 160 1225.M100 100 165 1225.M105 105 165 1225.M110 110 170 1225.M115 115 175 1225.M120 120 175 1225.M125 125 175 1225.M130 130 180 1225.M135 135 180 1225.M140 140 185 1225.M145 145 185 1225.M150 150 190 1225.M155 155 200 1225.M160 160 205 1225.M165 165 205 1225.M170 170 210 1225.M175 175 215 1225.M180 180 215 1225.M185 185 220 1225.M190 190 225 1

Art.225.M195 195 230 1225.M200 200 240 1225.M210 210 250 1225.M220 220 260 1225.M230 230 270 1225.M240 240 280 1

Art. 225.M”


BUSSOLA 2+1/2" ESAGONALE IN POLLICI TIPO MAC-CHINA, CON PROFILO OGIVALE AD ALTE PRESTA-ZIONI, REALIZZATA IN ACCIAIO AL CROMOMOLIBDENO FINITURA FOSFATATA, MISURA E LUN-GHEZZA COME INDICATO IN TABELLA .2+1/2" IMPACT HEXAGON SOCKET IN INCHES, MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEELWITH OGIVAL PROFILE, BLACK PHOSPHERATE FINISHED,SIZE AND LENGHT AS REPORTED ON THE CHART

Art.225.M2-9/16 2+9/16" 138 1225.M2-5/8 2+5/8" 138 1225.M2-3/4 2+3/4" 140 1225.M2-15/16 2+15/16" 143 1225.M3 3" 143 1225.M3-1/8 3+1/8" 150 1225.M3-1/4 3+1/4" 155 1225.M3-3/8 3+3/8" 155 1225.M3-1/2 3+1/2" 160 1225.M3-3/4 3+3/4" 160 1225.M3-7/8 3+7/8" 165 1225.M4 4" 165 1225.M4-1/8 4+1/8" 165 1225.M4-1/4 4+1/4" 170 1225.M4-1/2 4+1/2" 175 1225.M4-5/8 4+5/8" 175 1225.M4-3/4 4+3/4" 175 1225.M5 5" 180 1225.M5-1/8 5+1/8" 180 1225.M5-1/4 5+1/4" 180 1225.M5-1/2 5+1/2" 185 1225.M5-3/4 5+3/4" 185 1225.M6 6" 195 1225.M6-1/8 6+1/8" 200 1225.M6-1/4 6+1/4" 205 1225.M6-1/2 6+1/2" 205 1225.M6-3/4 6+3/4" 210 1225.M7 7" 215 1225.M7-1/8 7+1/8" 215 1225.M7-1/4 7+1/4" 220 1225.M7-1/2 7+1/2" 225 1225.M7-3/4 7+3/4" 230 1225.M7-7/8 7+7/8" 240 1225.M8 8" 240 1225.M8-1/4 8+1/4" 250 1225.M8-1/2 8+1/2" 260 1225.M8-3/4 8+3/4" 260 1225.M9 9" 270 1

Art. 288.M225


RACCORDO RIDUTTORE TIPO MACCHINA DA2+1/2" A 1+1/2" AD ALTE PRESTAZIONI TORSIONEMASSIMA 1412 Nm, IN ACCIAIO AL CROMO MOLIB-DENO FINITURA FOSFATATA.REDUCING ADAPTER FROM 2+1/2" TO 1+1/2" FOR IM-PACT SOCKETS, IN CHROME MOLYBDENUM HIGH PER-FORMANCE STEEL MAX TORQUE 1412 Nm, BLACKPHOSPHERATE FINISHED

Art.288.M225 2+1/2" - 1+1/2" 165 1

Art. 292.M


PROLUNGA INGRESSO/USCITA 2+1/2" TIPO MAC-CHINA AD ALTE PRESTAZIONI, REALIZZATA IN AC-CIAIO AL CROMO MOLIBDENO FINITURAFOSFATATA, SISTEMA DI AGGANCIO E LUNGHEZZACOME INDICATO IN TABELLA.2+1/2" IN/OUT IMPACT EXTENSION BAR, MADE INCHROME MOLYBDENUM HIGH PERFORMANCE STEEL ,BLACK PHOSPHERATE FINISHED, LOCKING SYSTEM ANDLENGHT AS REPORTED ON THE CHART

Art.292.M305 305 1292.M455 455 1292.M610 610 1

Art. 280.M225


SNODO CARDANICO 2+1/2" TIPO MACCHINA AD ALTEPRESTAZIONI IN ACCIAIO AL CROMO MOLIBDENO, FI-NITURA FOSFATATA. 2+1/2" IMPACT UNIVERSAL JOINT IN CHROME MOLYBDENUMHIGH PERFORMANCE STEEL , BLACK PHOSPHERATE FINISHED

Art.280.M225 2+1/2" - 2+1/2" 253 1

Art. 261.11


SPINA DI TENUTA 8x110 mm PER BUSSOLE ATTACCODA 2+1/2" TIPO MACCHINA MISURA ESAGONO DA65 A 115 mm. LOCK PIN 8X110 mm FOR 2+1/2" IMPACT SOCKETS HEXA-GON SIZE FROM 65 TO 115 mm

Art.261.11 65-115 110x8 5

Art. 261.12


SPINA DI TENUTA 8x125 mm PER BUSSOLE ATTACCODA 2+1/2" TIPO MACCHINA MISURA ESAGONO DA120 A 170 mm.LOCK PIN 8X125 mm FOR 2+1/2" IMPACT SOCKETS HEXA-GON SIZE FROM 120 TO 170 mm

Art.261.12 120-170 125x8 5

Art. 261.13


SPINA DI TENUTA 8x160 mm PER BUSSOLE ATTACCODA 2+1/2" TIPO MACCHINA MISURA ESAGONO DA175 A 195 mm E PER BUSSOLE 3+1/2" MISURA ESA-GONO DA 36 A 120 mm.LOCK PIN 8X160 mm FOR 2+1/2" IMPACT SOCKETS HEXA-GON SIZE FROM 175 TO 195 mm AND FOR 3+1/2" IMPACTSOCKETS HEXAGON SIZE FROM 36 TO 120 mm

Art.261.13 175-195 160x8 5

Art. 261.14


SPINA DI TENUTA 8x185 mm PER BUSSOLE ATTACCODA 2+1/2" TIPO MACCHINA MISURA ESAGONO DA200 A 240 mm E PER BUSSOLE 3+1/2" MISURA ESA-GONO DA 125 A 130 mm.LOCK PIN 8X185 mm FOR 2+1/2" IMPACT SOCKETS HEXA-GON SIZE FROM 200 TO 240 mm AND FOR 3+1/2" IMPACTSOCKETS HEXAGON SIZE FROM 125 TO 130 mm

Art.261.14 200-240 185x8 5

Art. 263.11


ANELLO ELASTICO DI SICUREZZA Ø 114x8 mm PERBUSSOLE ATTACCO DA 2+1/2" TIPO MACCHINA MI-SURA ESAGONO DA 65 A 115 mm.SAFETY RING Ø 114x8 mm FOR 2+1/2" IMPACT SOCKETSHEXAGON SIZE FROM 65 TO 115 mm

Art.263.11 65-115 114x8 5

Art. 263.12


ANELLO ELASTICO DI SICUREZZA Ø 127x8 mm PERBUSSOLE ATTACCO DA 2+1/2" TIPO MACCHINA MI-SURA ESAGONO DA 120 A 170 mm.SAFETY RING Ø 127x8 mm FOR 2+1/2" IMPACT SOCKETSHEXAGON SIZE FROM 120 TO 170 mm

Art.263.12 120-170 127x8 5

REXTA DIVISIONRevisione 01 Gennaio 2015

CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

234


REXTA DIVISION Revisione 01 Gennaio 2015

CH

IAVI

A B

USS

OLA

E A

CC

ESSO

RI /

SO

CK

ETS

& A

CC

ESSO

RIE

S

2 35


Art. 263.13


ANELLO ELASTICO DI SICUREZZA Ø 163x8 mm PERBUSSOLE ATTACCO DA 2+1/2" TIPO MACCHINA MI-SURA ESAGONO DA 175 A 195 mm E PER BUSSOLE3+1/2" MISURA ESAGONO DA 36 A 120 mm.SAFETY RING Ø 163x8 mm FOR 2+1/2" IMPACT SOCKETSHEXAGON SIZE FROM 175 TO 195 mm AND FOR 3+1/2"IMPACT SOCKETS HEXAGON SIZE FROM 36 TO 120 mm

Art.263.13 175-195 163x8 5

Art. 263.14


ANELLO ELASTICO DI SICUREZZA Ø 190x8 mm PERBUSSOLE ATTACCO DA 2+1/2" TIPO MACCHINA MI-SURA ESAGONO DA 200 A 240 mm E PER BUSSOLE3+1/2" MISURA ESAGONO DA 125 A 130 mm.SAFETY RING Ø 190x8 mm FOR 2+1/2" IMPACT SOCKETSHEXAGON SIZE FROM 200 TO 240 mm AND FOR 3+1/2"IMPACT SOCKETS HEXAGON SIZE FROM 125 TO 130 mm

Art.263.14 200-240 190x8 5

Art. 288.M235


RACCORDO RIDUTTORE TIPO MACCHINA DA 3+1/2"A 2+1/2" AD ALTE PRESTAZIONI TORSIONE MAS-SIMA 1412 Nm, IN ACCIAIO AL CROMO MOLIBDENOFINITURA FOSFATATA. REDUCING ADAPTER FROM 3+1/2" TO 2+1/2" FOR IMPACTSOCKETS, IN CHROME MOLYBDENUM HIGH PERFOR-MANCE STEEL MAX TORQUE 1412 Nm, BLACK PHOSPHE-RATE FINISHED

Art.288.M235 3+1/2" - 2+1/2" 215 1

Art. 260.M


TRAVERSA DI MANOVRA GRANDI SFORZI CON AT-TACCO SCORREVOLE PER BUSSOLE MACCHINA, INACCIAIO AL CROMO MOLIBDENO FINITURA FOSFA-TATA, ATTACCO QUADRO E LUNGHEZZA COME IN-DICATO IN TABELLA.T-HANDLE WITH SLIDING SQUARE DRIVE WITH STAN-DARD CONNECTION IN CHROME MOLYBDENUM HIGHPERFORMANCE STEEL, BLACK PHOSPHERATE FINISHED,SQUARE DRIVE AND LENGHT AS REPORTED ON THECHART

Art.260.M1/2 1/2" 380 1260.M3/4 3/4" 508 1260.M1 1" 710 1260.M1-1/2 1+1/2" 915 1

todescosrl.it · Art. 214 UNI ISO DIN uni-iso 2725 3124 BUSSOLA 1/4" ESAGONALE CON PROFILO OGIVALE...

Documents

Transcript of todescosrl.it · Art. 214 UNI ISO DIN uni-iso 2725 3124 BUSSOLA 1/4" ESAGONALE CON PROFILO OGIVALE...