Armor Products Catalogue 2011-Lela -...
Transcript of Armor Products Catalogue 2011-Lela -...
1
Sanda Catalogue --Armor & Riot Control
AAA... BBBuuulllllleeetttppprrroooooofff VVVeeesssttt &&& SSStttaaabbb rrreeesssiiissstttaaannnttt VVVeeesssttt
BBB... BBBuuulllllleeetttppprrroooooofff PPPlllaaattteee
CCC... BBBuuulllllleeetttppprrroooooofff HHHeeelllmmmeeettt &&& SSShhhiiieeelllddd
DDD... VVVeeehhhiiicccllleee AAArrrmmmooorrr
EEE... BBBuuulllllleeetttppprrroooooofff GGGlllaaassssss
FFF... AAAnnntttiii---cccuuuttttttiiinnnggg GGGlllooovvveee
GGG... RRRiiiooottt cccooonnntttrrrooolll ppprrroooddduuuccctttsss
HHH... CCCooorrrpppooorrraaatttiiiooonnn IIInnntttrrroooddduuuccctttiiiooonnn
A. Bulletproof Vest & Stab resistant vest
A - 1. Bulletproof vest Summary: We supply various kinds of BULLETPROOF VEST, STAB-PROOF VEST, STAB & BULELT
RESISTANT VEST according to clients’ requirements of styles, fabrics, colors, sizes (dimensions),
ballistic material, etc.
Nowadays, PE UD & Aramid UD (Kelvar UD, Twaron UD) are 2 kinds of main armor materials.
PE UD: Ultrahigh Molecular Weight Polyethylene(UHMWPE), also called High Strength High Modulus
PE fiber, which is featured of highest tenacity, low weight, soft, comfortable, outstanding UV resistant,
moisture resistance and waterproof. Furthermore the PE UD fabric has excellent performance on high
specific energy absorption and fastest shock wave dissipation.
Aramid UD: Advanced soft ballistic material, mainly includes Dupont Kevlar, Teijin Twaron. Aramid fibre
is highly celebrated by its good chemical resistance, high heat resistance, negative heat expansion, light
weight, environmentally friendly qualities, which guarantee the steady ballistic performance especially in
high temperature environments.
STAB & BULELT RESISTANT composite material : It’s the newest SOFT & NON-METAL stab & bullet
resistant material in China, which was developed by 2 years’ hard R&D works. It has been passed test of
China GA141-2001 Level II & III (China 54style and 79style lead cores), USA NIJ 0101.04 level IIIA .44,
and GA68-2008 (24J & 33J stab power), NIJ 0115.00 level I & II, which prevent against 24J & 36J, 33J &
50J.
2
Here are our BPVs classified by styles:
1. Concealable style bulletproof vest Ballistic performance NIJ 0101.04 Level IIIA (9mm & .44)
0.26m2 (S) 0.28m2 (M) 0.30m2 (L) … Protect area
Front, back (optional: sides) Protect coverage
Weight (PE UD) 2.1Kg 2.3Kg 2.4Kg …
Weight (Aramid UD) 2.2Kg 2.4Kg 2.5Kg …
2. Standard style bulletproof vest
Ballistic performance NIJ 0101.04 Level IIIA (9mm & .44)
0.26m2 (S) 0.28m2 (M) 0.30m2 (L) … Protect area
Front, back (optional: sides) Protect coverage
Weight (PE UD) 2.1Kg 2.3Kg 2.4Kg …
Weight (Aramid UD) 2.2Kg 2.4Kg 2.5Kg …
3
3. Standard-plus style bulletproof vest
Ballistic performance NIJ 0101.04 Level IIIA (9mm & .44)
0.30m2 (S) 0.32m2 (M) 0.34m2 (L) … Protect area
Front, back, sides, neck, (optional: shoulders) Protect coverage
Weight (PE UD) 2.4Kg 2.6Kg 2.7Kg …
Weight (Aramid UD) 2.5Kg 2.7Kg 2.8Kg …
4. All-Protect style bulletproof jacket
Ballistic performance NIJ 0101.04 Level IIIA (9mm & .44)
0.46m2 (S) 0.48m2 (M) 0.50m2 (L) … Protect area
Front, back, sides, neck, shoulders, groin Protect coverage
Weight (PE UD) 3.8Kg 3.9Kg 4.1Kg …
Weight (Aramid UD) 4.0Kg 4.1Kg 4.3Kg …
4
5. Floating bulletproof vest
Model 1
Model 2
Model 3
5
A - 2. Stab resistant vest Our NEWEST Stab-proof material is the first SOFT NON-METAL anti-stab composite material in China.
By combining with Kevlar UD or PE UD, vest of both stab-proof and bulletproof performances is come
into existence.
Our STAB-PROOF VEST, STAB & BULELT RESISTANT VEST could be supplied in any styles as same
as above BPVs. Please provide your requirements of protect levels, & patterns of vest, we’d supply
accordingly.
Bulletproof standard: USA NIJ 0101.04;
Stab-proof standard: USA NIJ 0115.00.
NIJ 0115.00 Stab resistant protection level strike energies
Protection level “E1” strike Energy
J ft·Ibf
“E2” strike Energy
J ft·Ibf
1 24±0.50 17.7±0.36 36±0.60 26.6±0.44
2 33±0.60 24.3±0.44 50±0.70 36.9±0.51
3 43±0.60 31.7±0.44 65±0.80 47.9±0.59
The various knives for testing
NIJ standard testing knife
㎡ ㎡
㎡
㎡
6
B. Bulletproof plate
No. Material Specifications
1 Kelvar/AL2O3
(Aluminum Oxide)
Protect Level: USA NIJ Standard 0101.04 Level III, Stand Alone
Curvature: Single Curve
Size: 10" x 12"
Finish: Water Repellent Black Cover
Thickness: 20mm
Weight: 2.7kg
2 Kelvar/SiC
Protect Level: USA NIJ Standard 0101.04 Level III, Stand Alone
Curvature: Single Curve
Size: 10" x 12"
Finish: Water Repellent Black Cover
Thickness: 20mm
Weight: 2.4kg
3 PE/SiC
Protect Level: USA NIJ Standard 0101.04 Level III, Stand Alone
Curvature: Single Curve
Size: 10" x 12"
Finish: Water Repellent Black Cover
Thickness: 20mm
Weight: 2.3kg
Ammunitions to be prevented against: ·7.62 × 51mm NATO ball ammunition at 15 meters
·7.62 × 39mm MSC/AP AK-47 at 15 meters
·5.56 × 45mm M193/SS109/M855 M16 at 15 meters
·5.45 × 39mm Russian ball at 15 meters
·12 gauge slug at 0 meters
Photos:
Shooted by AK-47, front & back views. Plates in workshop
4 100% PE
Protect Level: USA NIJ Standard 0101.04 Level III, Stand Alone
Curvature: Single Curve
Size: 10" x 12"
Thickness: 18mm-20mm
Weight:1.5kg -2.0kg
7
Ammunitions to be prevented against: ·7.62 × 51mm NATO ball ammunition at 15 meters
·7.62 × 39mm MSC/API AK-47 at 15 meters
·5.56 × 45mm M193/SS109/M855 M16 at 15 meters
Photos:
5 Dyneema® (DSM)
Protect Level: USA NIJ Standard 0101.04 Level III, Stand Alone
Curvature: Single Curve
Size: 10" x 12"
Thickness: 18mm
Weight: less than 1.3kg
Ammunitions to be prevented against: ·7.62 × 51mm NATO ball ammunition at 15 meters
·7.62 × 39mm MSC/API AK-47 at 15 meters
·5.56 × 45mm M193/SS109/M855 M16 at 15 meters
Photos: Multi-hits
6 Kelvar/ AL2O3
(Aluminum Oxide)
Protect Level: USA NIJ Standard 0101.04 Level IV, Stand Alone
Curvature: Single Curve
Size: 10" x 12"
Finish: Water Repellent Black Cover
Thickness: 22mm
Weight: 3.3kg
7 PE/AL2O3
(Aluminum Oxide)
Protect Level: USA NIJ Standard 0101.04 Level IV, Stand Alone
Curvature: Single Curve
Size: 10" x 12"
Finish: Water Repellent Black Cover
Thickness: 22mm
Weight: 3.0kg
8 Kelvar/SiC
Protect Level: USA NIJ Standard 0101.04 Level IV, Stand Alone
Curvature: Single Curve
Size: 10" x 12"
Finish: Water Repellent Black Cover
Thickness: 22mm
Weight: 2.8kg
9 PE/SiC
Protect Level: USA NIJ Standard 0101.04 Level IV, Stand Alone
Curvature: Single Curve
Size: 10" x 12"
Finish: Water Repellent Black Cover
Thickness: 22mm
Weight: 2.7kg
8
Ammunitions to be prevented against: ·7.62 × 63mm M2 AP at 15 meters
·7.62 × 54mm lead core ball ammunition, Dragunov Sniper Rifle at 15 meters
·7.62 × 54mm API, Chinese 79/85 Type Sniper Rifle at 15 meters
·7.62 × 51mm NATO ball ammunition at 15 meters
·7.62 × 39mm MSC/API AK-47 at 15 meters
·5.56 × 45mm M193/SS109/M855 M-16 at 15 meters
·12 gauge slug at 0 meters
Photos:
Shooted by 7.62*54mm API, front & back views. Plates in workshop
C. Bulletproof Helmet & Shield
1. Kevlar Bulletproof Helmet: Protect level: USA NIJ Standard 0101.04 Level IIIA - 9mm para pistol
Weight: 1.45Kg
Package
9
2. PE Bulletproof Helmet: Protect level: USA NIJ Standard 0101.04 Level IIIA - 9mm para pistol.
Weight: 1.5Kg
3. DSM Dyneema Helmet
Protect area 1290cm2
Materials Dyneema® HB26 /HB25
Protect level NIJ 0101.04 Level IIIA;
China 54 style hand gun
(LC/lead core)
China 79 style
mini-machine gun
(LC/lead core)
Fragmentation
1.1g FSP ≥ 620m/S
Weight (≤ kg) 1.2 1.35 1.2
It’s the lightest helmet solution in China, which can meet demands for higher protect level (79
mini-machine gun LC / SC).
3. Bulletproof Face Shield: Material: PC
Standard: USA NIJ Standard 0101.04 Level IIIA - 9mm & .44
Size: 130mm*300mm*22mm
Weight: 1.5Kg
10
4. Bulletproof Shield: 4.1 DSM Dyneema ballistic shield
# 1 # 2
Protect level: NIJ0101.06 level IIIA, (.44 rem
Magnum )
Protect level: NIJ 0101.04 Level III, (AK47 MSC &
M14, 7.62X51mm NATO Ball)
Material: Holand DSM Dyneema® HB26
Dimensions: 900mm*520mm*6mm.
Weight: ~ 3.5kg
Window: PC bulletproof glass
200mm*60mm*17mm
Material: Holand DSM Dyneema® HB26
Dimensions: 780x470x18.5 mm
Weight: ~ 8.5 kg
Window: No window
Handle attachment: suspending handle attachment at the back of shield, which include steel holder,
cast aluminum handle, hard aluminum elbow hanger.
4.2 Ceramic ballistic shield: Protect level: NIJ0101.06 level IV
Material: Kevlar fabric & AL2O3 ceramic
Dimensions: Height * Arc Length * width (1600mm* 750mm* 700mm)
Frame: high quality stainless frame, rustless, corrosion resistant. Universal wheels at the bottom.
Hand Hold Ballistic Shield
11
D. Vehicle Armor 1. Vehicle armor panel
CEN NIJ Type & Caliber Vehicle Armor Solutions
DSM
Dyneema Kevlar Fiber glass
Kevlar &
AL2O3 Ceramic
Kevlar &
SiC Ceramic
Steel &
Fiber glass
B3 II 9mm Para bullet
(358m/s)
3.6 kg/m2
3.2mm
B4 IIIA Submachine
gun 9x19 mm
4kg/m2;
6mm
8kg/m2 ;
8mm
10kg/m2;
8mm
B6 III Rifle 7.62x51 mm
NATO
19kg/m2;
18-19mm
70-80kg/m2;
30mm
40kg/m2;
20mm
36kg/m2;
20mm
65-70kg/m2;
15-16mm
B7 IV 7.62*63mm M2 AP 48kg/m2
22mm
CEN = Central European Norm (EU)
NIJ = National Institute of Justice (0108.01)
Notice:
For B6 level, we highly recommend Dyneema because of its light weight, easier technical processing.
Compared to it, Kevlar&AL2O3 ceramic solution is more complicated and difficult to be installed on vehicle.
The main reason is that the ceramic is too hard to be drilled or designed the holes on the complete panels
for installing.
Pictures
Dyneema ®
Vehicle Armor Panels
12
E. Bulletproof glass Level Ballistic Threat Weight Thickness No.
NIJ I CEN B2
9*19mm Para Multi-shots 7.62*25MM Tokarev Multi-shots
35kg/m2 17mm 1
NIJ II CEN B3
9*19mm Para Multi-shots .357Magnum Multi-shots
42kg/m2 19mm 2
.357 Magnum Multi-shots 40kg/m2 21mm 3
9mm FMJ RN 43kg/m2 18mm 4
62kg/m2 30mm 5
NIJ IIIA CEN B4
.44Magnum Multi-shots 60kg/m2 25mm 6
CEN B5 5.56*45mm SS109 Multi-shots 7.62*39MM MSC Multi-shots
77kg/m2 35mm 7
84kg/m2 39mm 8
79kg/m2 36mm 9 NIJ III CEN B6 STANAG I
7.62*51MM NATO multi-shots
74kg/m2 34mm 10
NIJ IV 7.62*63mm AP Single shot 7.62*54mm API Single shot
118kg/m2 52mm 11
STANAG II 7.62*39MM API BZ Multi-shots 138kg/m2 61mm 12
CEN B7 7.62*63mm AP Multi-shots 7.62*54mm API Multi-shots
179kg/m2 79mm 13
STANAG III 7.62*51mm WC Multi-shots 7.62*54R B32 API Multi-shots
234kg/m2 103mm 14
HUMMER ARMOR SOLUTIONS
13
F. Anti-cutting Glove
1. Anti-cutting gloves Material: Nickel Titanium Wire
Outer coat: goatskin / cloth
Protect level: EN388 Level V
GLOVE001GS GLOVE002GS GLOVE003MW GLOVE005B
2. Anti-cutting gloves made of PE: Material: PE
Protect level: EN388 Level V
GLOVE004PE
3. Anti-cutting gloves Material: Kevlar
Protect level: GA614-2006 / EN388 Level V
KEVLARGLOVE
14
G. Riot control products
1. Anti-riot helmet 1.1 Model: FBK-5LD Color: White/Navy blue
Material: Polycarbonate mixed some ABS to increase the toughness of the helmet, the shell with
thickness: 4mm
Visor: 2mm thickness, polycarbonate material (PC)
Cushion about 2cm thickness
Weight: 1.60kgs,
Size: L for head size: 580-600mm,
M for head size 560-580mm,
S for head size 540-560mm
Packing: 85*38*84cm NW: 14kgs GW: 17kgs 9pcs/carton
Plz notice: Helmet’s Color can be optional and wrinkle finish would be done too.
Without gas mask clip With gas mask clip
Inside view
15
1.2 Model: KX02-203 1). Performance of absorbing collision power:
When put the helmet on corresponding head models and make it falling down freely 2 times from the
height of 18350mm±5mm at 4 directions of front, back, left and right, the deviation of the same collision
point should be less than 5mm, there is not breach on the helmet.
2). Anti-deformation performance:
Making an steel awl of 3kg mass falling down from 3000mm±5mm freely two times, the distance
between each testing point should be not less than 75mm, the steel awl should not be penetrated the
helmet and touch the head model.
3). Flame resistance performance:
Smearing the helmet surface and visor with 25ml solvent compose by 50% methylbenzene and 50%
isooctane, igniting the top of the helmet after 30 seconds, the flames would be extinguished freely within
10 seconds.
4). Working temperature:
The above performance would be workable at temperature of -20℃ +55℃
5). Size: 270mm×220 mm×215 mm
6). Weight: 1.3kg
7). Visor: anti-fog
Picture:
2. Anti-riot suit 2.1 Model: FBF-L Hard material, high-performance anti-fire special treated PC, includes Leg protector, Arm protector,
Anti-riot vest, neck protector, gloves, without baton and helmet.
FBF-L Specifications:
1. Material of cloth: Fireproof cloth, index of Oxygen: 28%
2. Material of Groin: aluminum alloy board
3. Foam of Chest and back: 1 layer 3mm thickness, 1 layer 2mm thickness, Support layer: 10mm
4. Foam in other parts: 1 layer 3mm thickness, 1 layer 5mm thickness
5. Protective of PC board in chest and back: Bear the impact of 120J Kinetic energy, can bear 20J
Kinetic energy from a sharp knife
6. Protective of other PA parts: Can bear the impact of 120J Kinetic energy
7. Ventilation: The 10mm support foam layer in chest and back can reduce the contact from the body
and unit, become an airy room, the body can cool him off in a short time.
8. Wear: Easy to wear and take off
9. Protection proportion: Size L >1.15 m2; Size S >1.0 m2
10. Weight: Uniform: 6.8-7kgs, Gloves: 0.2kgs
11. Packing: 63*61*45cm; NW: 19kgs; GW: 21kgs; 2pcs/ctn
12. Pictures:
16
2.2 Model: FBF-B-LD01 (06 Version) 1. Components: The anti-riot suit (06 Version) is composed by the followings parts: neck, shoulders,
chest, back, lower abdomen, vertebra, groin, arm,
elbow, hand, knee, legs and feet.
2. Functions: The suit is especially designed army
appliance for policemen, which would effectively
protect against attacks from bayonet, dagger, cudgel,
brick and stone, chemical liquid etc.
3. Characteristic
1) The product’s surface is coated by high strength
coating and special plastic, which are environmental
Protect, non poisonous and without natural hurt for
peoples. Besides, the beautiful appearance, excellent
quality and humanization design would be coordinated
with combating practicability.
2) The performance of every Protect parts meet
GA420-2003 standard, which include Adaptability of
temperature (+55 /℃ -20 ,4h), Stab resistance ℃
performance (20J), Striking resistance performance
(120J), Absorbing performance to striking energy
(100J) and Flame resistance performance.
3) Unique design of complete connecting parts.
There are connecting appliance and adjustable
function between thighs and shanks, which solve the
problems of chopping insteps when walking and
running.
4) Based on anti-stab function, we also added
adjustable bowls at the lower abdomen. Along with
buckles at the chest and vertebra, the unique design is
more convenient for policemen when urinating.
5) Quick release system: compared to China similar products’ 10-20 minutes, people wear our suit
would be within 2 minutes.
6) Light weight. Total weight 6.5kg is much lighter than similar products in China.
17
7) There is ventilated suspending system at the parts of chest, back, thighs, shanks and arms, which
solve the actual requirements of the end users.
8) Each parts of the anti-riot suit could be removed and washed.
9) Special design of removable anti-stab panels at the chest and back. The bulletproof panels could
be inserted when execute special tasks.
10) Additional accessories of multi-functional cow leather bags, gas mask bags, multi-functional
hooks would increase the combating practicability.
11) The package bag could be for both carrying on the back and by hand.
12) It’s patented products in China.
2.3 Model: FBF-B-LD01 (08 Version) 1. Standard: “GA420-2008 Anti-riot suit” standard
2. Size: Suitable for height of 165cm-185cm people
3. Weight: 8.0kg
4. Protect area:
Standard style: chest and groin≥0.10 , back≥0.10 ,
upper limb≥0.18 , lower limb≥0.30 .
5. Connection strength:
The strength of Nylon straps are more than 7.0N/
when connected the loops and hooks. The strength of
buckle is more than 500N connecting strength is more
than 2200N.
6. Stab resistance performance:
Stabbing of front chest, back and groin (without the
connections) by the knife that stipulated in GA68
standard with strength of 20J kinetic energy, the Protect
areas would not been penetrated.
7. Striking resistance performance:
Putting the random Protect areas of anti-riot suit on
rigidity flat surface, the corresponding parts would not
been broken and cracked after attacking by 120J kinetic
energy.
8. Absorbing performance to striking energy:
Putting the front chest, back of anti-riot suit on standard
clay and attacking with 100J power respectively, the
deformation on the clay would be less than 20mm.
9. Adaptability of temperature:
The above performance would be met when at
temperature of -20 +55 .
10. Flame resistance performance:
The burning time of ignited positions on Protect areas
would be less than 10 seconds.
18
3. Anti-riot shield
Model Picture Specifications
NET WEIGHT: 2.5KG
Color: transparent
Size: 900*500mm
Thickness: 3.5mm
Material: PC
Delivery time: around 50 days for 5000pcs
1.
FBPT-L
NET WEIGHT: 3.6KG
Color: transparent
Size: 555mm*990mm*160mm
Thickness: 3mm
Material: PC
Delivery time: around 50 days for 5000pcs
2.
FBPT-LT6
Synthetic leather
Rubber
19
3.
FBP-TL-HH07
NET WEIGHT: 3.3 Kg
Color: transparent
Size:930mm×530mm
Thickness: 4-5mm
Material: imported PC with inject workmanship
Anti-UV
Delivery time: around 50 days for 5000pcs
4.
FBP-BL-LD03
1. Standard: China Ministry of Public Security “GA 422-2008 Anti-shield” standard
2. Striking resistance performance: the shield is made of high strength 2A12-T4
aluminum alloy, which can sustain 147J striking power. The attacked point would not
be broken and without holes.
3. Anti-stab performance: the shield would not be penetrated after stabbing by
standard GA68 testing knife with 20J kinetic energy at 0° direction.
4. Adaptability of temperature: the above performance would be met when at
temperature of -30 +55
5. Adhesive force of coating: the adhesive force of matt finishing plastic spraying land
like coating at the surface of shield should be more than level 3 in GB/T9286.
6. Flame resistance performance: put the shield on the top
of fire, the ignited position should not being burning for
more than 5 seconds after removing.
7. Connecting strength of the handle: the connecting points
between handle and shield should sustain 500N tensile
strength without loosing, cracking and shedding.
8. Connecting strength of the arm tape: the connecting
positions between the arm tape and shield should sustain
500N tensile strength after the tape is closed, without
loosing, cracking and shedding.
9. Transparency of window: 88%
10. Dimensions: 500mm×900mm×3.5mm
11. Protect area: 0.47
12. Weight: 3.8kg
5.
FBP-T-L
1. Standard: China Ministry of Public Security “GA 422-2008 Anti-shield” standard
2. Striking resistance performance: the shield can sustain 147J striking power. The
attacked point would not be broken and without holes.
3. Anti-stab performance: the shield would not be penetrated after stabbing by
standard GA68 testing knife with 20J kinetic energy at 0° direction.
4. Adaptability of temperature: the above performance would be met when at
temperature of -20 +55℃ ℃
5. Flame resistance performance: put the shield on the top of fire, the ignited position
should not being burning for more than 5 seconds after removing.
6. Connecting strength of the handle: the connecting points between handle and
shield should sustain 500N tensile strength without loosing, cracking and shedding.
20
7. Connecting strength of the arm tape: the
connecting positions between the arm tape and shield
should sustain 500N tensile strength after the tape is
closed, without loosing, cracking and shedding.
8. Transparency of window: 88%
9. Weight: 3kg
10. Dimensions: 560mm×1000mm×3mm
11. Material: We especially select the high strength
Polycarbonate (PC) from German Bayer company in
order to increase the life span of the shield,
12. Appearance: the whole design of the French style
shield is beautiful appearance, strong and fixed,
stereoscopic view. The special design of curved line
would increase the striking resistance function, and
raise the Protect to people’s head.
4. Baton 4.1 Model: PXJ-T1 Black, PC,
Net weight: 0.67kg,
Polycarbonate Material
Length: 600mm, Diameter: 32mm
4.2 Model: JG-S-LDT1 Dimensions: Net length: 580mm±2mm;
Length: front length 420mm±2mm; side handle 135mm±1mm; straight handle
150mm±1mm.
Baton diameterΦ:32mm±0.5mm
Specifications 1. Appearance: clean without crack, foreign substances and other defects;
2. Allowed deformation: less than 5mm;
3. Allowed tensile strength: ≤700N;
4. Shore A hardness: 98;
5. Adaptability of temperature: -20℃ +55℃
6. Thermal deformation temperature: 80 ±2 ;℃ ℃
7. Life span: working times should be not less than 3000; cracks and fracture are not allowed.
21
5. Bomb blanket - Standard: China Standard GA69-2007
- Bomb blanket: 1600mm*1600mm/1200mm*1200mm
- Bomb Jar: 400mm (diameter)*300mm (height)
- Total weight: about 30kg
According to newest anti-bomb standard in China GA69-2007, the
bomb blanket should meet the follow specifications:
·At first, use the bomb jar to cover the suspicious explosive
substances, and make it at the center of the jar, then put the
blanket on the jar and make the center point match the jar's.
·Bomb suppression performance:
As explosive source, one 82-2 standard grenade would be put
in the center of a circle of simulate target for shooting that of
3000mm diameter and 1700mm height would be surrounded.
When the explosive sources are detonated, there should be not
any penetrated holes on the targets.
Package: 60cm*56cm*35cm/ctn; 1pc/ctn
H. Corporation Introduction
Shandong Sanda Scientific and Technological Development Corporation is an high-tech enterprise,
which integrates researching, developing, manufacturing and trading. We've been in the body armor
industry for over 40 years . Our products have been supplied to USA, Denmark, Netherlands, Norway,
Canada, Australia, Nigeria, Pakistan, Thailand, Philipinese, Malaysia, Bangladesh, Vietnam, Yemen,
UAE, Pakistan, Saudi Arabia, UAE, Laos, Peru, Ghana, Russia, etc. Pakistan army is our biggest client,
whom we delivered 80thousand of bulletproof plates and 40thousand vests in 2009 & 2010. We also
have our own Ballistic Lab , which is one of three authorized Labs in China.
Technology: based on the first-class composite armor R&D team in China, we can supply the armor
panels according to clients' requirements of protect level, ammunitions, size, and shapes. The team
represents the highest level in China. We'd like to invite you to come to us to have a face-to-face talk with
them, and then you would find I said every word.
Production capacity: when original material's available, we can supply 480pcs of 25cm*30cm NIJ
plates within one day at max by giant equipment, which cost us over 300 thousand dollars. Because of it,
By supplying bulletproof plate of 10000pcs/month and bulletproof vest of 5000pcs/month , we’ve been
the biggest manufacturer of body armor in China.
Our products: bulletproof vest, bulletproof chest plate, bulletproof helmet, bulletproof veil(visor), vehicle
armor, anti-cutting gloves, bulletproof & anti-stab vest, anti-riot helmet, anti-riot suit, riot shield, bomb
blanket, baton, and night vision binocular(distributor) etc, military and police goods.
Ballistic material used for our products: Kevlar (Dupont), Twaron (Teijin), Dyneema(DSM), UHMWPE
(China-made), high strength ceramic, PC etc.
Quality Certificates: ISO 9001-2001
22
IMPORT&EXPORT right: OWN
Adhere to the principle of Sincere Cooperation; Warm Service; Mutual Benefit, we make great efforts in
seeking overseas cooperation business and would like to develop long-term international business on
the basis of "Mutual Respect & Mutual Benefits ".
Our factory & equipments:
Workshop:
23
Ballistic Lab
Lela Liu / Sales Manager
Cell: 0086-13695314078
Tel: 0086-531-85895916
Fax: 0086-531-85895816
MSN: [email protected]
Skype: lela.liu
WebSite: http://www.sanda-tech.cn
http://sanda-tech.en.alibaba.com/
Add: No 3 Tian Jia Zhuang East Road, Jinan, Shandong province, P. R. China 250031
Shandong Sanda Sci. & Tech. Development Corp.
Welcome your visit & cooperation!