Armaform Pet Tds
Click here to load reader
-
Upload
dusan-petrovic -
Category
Documents
-
view
45 -
download
0
Transcript of Armaform Pet Tds
Armacell Benelux S.A. Rue des Trois Entités 9 - B-4890 Thimister-ClermontTel.: +32 (0) 87 32 50 70 - Fax: +32 (0) 87 32 50 [email protected] - www.armacell-foam-cores.com
Copyright: Armacell Benelux SA, subject to changes - 200-004/07-1110-(GB)-WW
Preliminary TECHNICAL DATA (11-2010)
ArmaFORM PET AC Polyethylene Terephthalate (Welded)
AC 80 (W)
AC 100 (W)
AC 115 (W)
AC 135 (W)
AC 150 (W)
Density ISO 845 kg/m³ 80 (1) 100 (1) 115 (1) 135 (1) 150 (1)
Compression Strength ASTM D 1621 b MPa 1,0 1,5 1,8 2,3 2,6
Compression Modulus
ASTM D 1621 bISO 844
MPaMPa
7560
10570
12080
15090
180105
Shear Strength ISO 1922 MPa 0,6 0,9 1,0 1,3 1,4
Shear Modulus ISO 1922 MPa 20 25 30 35 45
Shear Strain ISO 1922 % 35 30 20 15 10
Tensile Strength ASTM C 297 MPa 1,4 1,6 1,8 2,5 2,8
Tensile Modulus ASTM C 297 MPa 75 105 120 150 190
Thermal Conductivity
DIN EN ISO 12667 W/mK 0,032 0,034 0,035 0,037 0,041
Fire, Smoke & Toxicity (2)
B2FMVSS 302ULToxicity
EN ISO 11925:2ISO 3795UL 94DIN EN ISO 5659-2:2007 & DIN 5510:2009-05
B2Passed
HBFtbd
B2Passed
HBFtbd
B2Passed
HBPassed
B2Passed
HBFtbd
B2Passed
HBFtbd
Thickness Length Width Diagonal
Dimensions (mm) (3)
from 5 to 120 2.440 1.005 Depending on length/width
Tolerances (mm)
+/- 0,5 +/- 5 +/- 5 < 4
Armacell provides this information regarding suitability and safety of products as accurately as possible. Armacell shall in no event be liable for any incidental or consequental damages resulting from the use of said products. All products are sold without any war-ranties, express or implied merchantability of fitness of purpose. The recipient of those goods or information is strongly advised to make their own tests to determine the safety and suitability of each such product or combination of products for their own purposes.
(1) Tolerances +/-5 kg/m³.(2) For detailed test results and certificates please contact us.(3) Standard dimension. Further dimensions on special request. All values are average production figures. Please note that all values are preliminary
Appearence : Voids and holes will meet following requirements for a standard board size of : 1.005M*2.440M
- < Ø 3mm not considered as hole - Ø 3 - Ø5mm max 25 per board - Ø 6 - Ø10mm max 5 per board
- Ø 11 - Ø15mm max 3 per board - > Ø 15mm none
(1) Tolerances +/-0,3125 Ib/ft³.(2) For detailed test results and certificates please contact us.(3) Standard dimension. Further dimensions on special request.All values are average production figures. Please note that all values are preliminary.
Armacell Benelux S.A. Rue des Trois Entités 9 - B-4890 Thimister-ClermontTel.: +32 (0) 87 32 50 70 - Fax: +32 (0) 87 32 50 [email protected] - www.armacell-foam-cores.com
Copyright: Armacell Benelux SA, subject to changes - 200-004/07-0111-(GB)-WW
Preliminary TECHNICAL DATA (01-2011)
ArmaFORM PET AC Polyethylene Terephthalate (Welded)
AC 80 (W)
AC 100 (W)
AC 115 (W)
AC 135 (W)
AC 150 (W)
Density ISO 845 Ib/ft³ 5 (1) 6,2 (1) 7,2 (1) 8,9 (1) 9,4 (1)
Compression Strength ASTM D 1621 b psi 145 217,56 261,07 334 377,1
Compression Modulus
ASTM D 1621 bISO 844
psipsi
108788702
1522910153
1740511603
2175613053
2610715229
Shear Strength ISO 1922 psi 87 131 145 189 203
Shear Modulus ISO 1922 psi 2901 3626 4351 5076 6527
Shear Strain ISO 1922 % 35 30 20 15 10
Tensile Strength ASTM C 297 psi 203 232,06 261,07 362,59 406,11
Tensile Modulus ASTM C 297 psi 10878 15229 17405 21756 27557
Thermal Conductivity
DIN EN ISO 12667
BTU.in/FT².hr.°F 0,225 0,237 0,245 0,26 0,29
Fire, Smoke & Toxicity (2)
B2FMVSS 302ULToxicity
EN ISO 11925:2ISO 3795UL 94DIN EN ISO 5659-2:2007 & DIN 5510:2009-05
B2Passed
HBFtbd
B2Passed
HBFtbd
B2Passed
HBPassed
B2Passed
HBFtbd
B2Passed
HBFtbd
Thickness Length Width Diagonal
Dimensions (mm) (3)
(in)from 5 to 120from 0,1968 to 4,7244
2.44096,0628
1.00539,5668
Depending on length/width
Tolerances (mm) (in)
+/- 0,5+/- 0,01968
+/- 5+/- 0,1968
+/- 5+/- 0,1968
< 4< 0,1574
Armacell provides this information regarding suitability and safety of products as accurately as possible. Armacell shall in no event be liable for any incidental or consequental damages resulting from the use of said products. All products are sold without any war-ranties, express or implied merchantability of fitness of purpose. The recipient of those goods or information is strongly advised to make their own tests to determine the safety and suitability of each such product or combination of products for their own purposes.
Appearence : Voids and holes will meet following requirements for a standard board size of : 96,0628*39,5668 in
- < Ø 0,11811in not considered as hole - Ø 0,11811 - Ø 0,1968in max 25 per board - Ø 0,23622 - Ø 0,3937in max 5 per board
- Ø 0,43307 - Ø 0,59055in max 3 per board - > Ø 0,59055in none