Area Lighting KSF1 - Boston Light Source · ORDERING INFORMATION Example: KSF1 150S R3 120 SP04 SF...
-
Upload
hoangduong -
Category
Documents
-
view
217 -
download
4
Transcript of Area Lighting KSF1 - Boston Light Source · ORDERING INFORMATION Example: KSF1 150S R3 120 SP04 SF...
Example: KSF1 150S R3 120 SP04 SF LPIORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
NOTES:1 Consult factory for availability in Canada.2 Optional multi-tap ballast (120, 208, 240, 277V). (120, 277, 347V in Canada).3 Use SP09, RP09 or WW09 when two or more luminaires are oriented on a 90° drilling
pattern.4 Must specify voltage (N/A TB)5 Lamp not included.6 Additional architectural colors available; see Architectural Colors brochure.7 For arm mounting, see technical data section in Outdoor binder for drilling template.
Specifications
EPA: 1.5 ft.2 (.14m2)(includes arm)Length: 21-1/4 (54)Width: 15-15/32 (39.3)Depth: 7-1/4 (18.4)Weight: 35 lbs (15.9kg)Arm: 4 (10.2)
Accessories: Tenon Mounting Slipfitter (Order separately)Number of fixtures
Tenon O.D. One Two@180° Two@90°3 Three@120° Three@90°3 Four@90°3
2-3/8" T20-190 T20-280 T20-290 T20-320 T20-390 T20-4902-7/8" T25-190 T25-280 T25-290 T25-320 T25-390 T25-490
4" T35-190 T35-280 T35-290 T35-320 T35-390 T35-490
OUTDOOR
Distribution
R2 IES Type II roadwayR3 IES Type III asymmetric
R4SC IES Type IV forward throw, sharp cutoff
Series
KSF1
Sheet #: KSF1-M-S AL-310
Area Lighting
KSF1METAL HALIDE
HIGH PRESSURE SODIUM70W - 250W
15' to 20' Mounting
FEATURES & SPECIFICATIONSINTENDED USEIdeal for use in car lots, street lighting or parking areas.CONSTRUCTIONRugged, .063” thick, aluminum rectilinear housing. Continuously seamwelded for weather-tight seal and integrity.Naturally anodized, extruded, aluminum door frame with mitered corners isretained with (two) .188” diameter hinge pins and secured with (one) quar-ter-turn, quick release fastener. Weatherproof seal between housing anddoor frame is accomplished with an integrally designed, extruded siliconegasket that snaps into door frame.FINISHStandard finish is dark bronze (DDB) polyester powder. Other powder ar-chitectural colors available.OPTICAL SYSTEMReflectors are anodized and segmented for superior uniformity and con-trol, which allows the flexibility to mix distributions without compromising theoverall lighting job. Reflectors attach with tool-less fasteners and are rotat-able and interchangeable.Three cutoff distributions available: Type II(Roadway), Type III (Asymmetric), Type IV (Forward Throw, Sharp Cutoff).Lens is .125” thick, impact-resistant, tempered, glass with thermally-applied,silk screened power door shield.ELECTRICAL SYSTEMHigh reactance, high power factor ballast. Ballast is copper wound and100% factory tested. Porcelain, horizontally-oriented, mogul-base socketwith copper alloy, nickel-plated screw shell and center contact. UL listed1500W-600V, 4KV pulse rated.INSTALLATIONExtruded, 4” aluminum arm for pole or wall mounting is shipped in fixturecarton. Optional mountings available.LISTINGListed and labeled to UL standards. Listed and labeled to CSA standards(see Options). NOM Certified (see Options).
Catalog Number
Notes Type
Voltage
1202081
2401
2773474801
TB2
Mounting7
SP04 Square pole (4" arm)(standard)3
SP09 Square pole (9" arm)RP04 Round pole (4" arm)3
RPO9 Round pole (9" arm)WWO4 Wood pole or wall (4" arm)3
WWO9 Wood pole or wall (9" arm)WBO4 Wall bracket (4" arm)WBO9 Wall bracket (9" arm)
L/ARM When ordering KMA, DA12Optional Mounting
(shipped separately)DA12P Degree arm (pole)
DA12WB Degree arm (wall)KMA Mast arm adapter
KTMB Twin mounting bar
Options
Shipped installed in fixtureSF Single fuse4
DF Double fuse4
PER NEMA twist-lock receptacle only(no photocontrol)
QRS Quartz restrike system (75W max)5
QRSTD QRS time delay (75W max)5
EC Emergency circuit5
CR Enhanced corrosion resistanceCSA Listed and labeled to comply with
Canadian StandardsNOM NOM Certified (consult factory)
Shipped separatelyPE1 NEMA twist-lock PE (120, 208,
240V)PE3 NEMA twist-lock PE (347V)PE4 NEMA twist-lock PE (480V)PE7 NEMA twist-lock PE (277V)SC Shorting cap for PER option
KSF1HS House side shield (R2,R3)KSF1VG Vandal guard
Lamp
LPI Lamp included(standard)
L/LP Less lampWattage
Metal halide100M150M175M200M250M
High pressuresodium
70S100S150S200S
Architectural colors(powder finish)6
DWH WhiteDBL Black
DMB Medium bronzeDNA Natural aluminumDSS SandstoneDGC Charcoal grayDTG Tennis greenDBR Bright redDSB Steel blue
KSF1
All dimensions are inches (centimeters)unless otherwise specified.
Mounting Option Drilling Template6
SPxx, RPxx, DA12P 5WBxx, DA12WB 6
WWxx 7
LArm
D
Mounting Height Correction Factor(Multiply the fc level by the correction factor)15 ft.= 5.430 ft.= 1.3640 ft.= .77
KSF1 Arm-Mounted Rectilinear Cutoff Lighting
NOTES:1 For electrical characteristics, consult technical data tab.2 Tested to current IES and NEMA standards under stabilized laboratory conditions.
Various operating factors can cause differences between laboratory and actualfield measurements. Dimensions and specifications are based on the most currentavailable data and are subject to change.
3 Photometric data for other distributions can be accessed from www.lithonia.com.
©2000 Acuity Lighting Group, Inc., Rev. 8/06Sheet #: KSF1-M-S
Lithonia LightingOutdoor LightingOne Lithonia Way, Conyers, GA 30012-3957Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com
Coefficient of UtilizationInitial Footcandles