Architectural Shelters Canopies and Cycle Shelters[1]

8/3/2019 Architectural Shelters Canopies and Cycle Shelters[1]

1/9

www.furniture4streets.com

Architectural Street Furniture

Shelters, Canopies and Cycle Shelters


2/965

Heritage Waiting Shelter


3/966

Tel: 01253 600415

Fax: 01253 792558

e-mail: [email protected]

web: www.glasdon.com

Traditional style for traditional locations.

Heritage Shelters, with a decorative gold reliefmouldings to the panels, are the ideal choice wherea more traditional style is required. Manufacturedfrom low-maintenance materials, the HeritageShelter offers a high degree of corrosion resistanceas well as eliminating routine painting requirements.The shelters are available in various models with

different configurations. They are delivered pre-assembled to allow prompt and simple installation.

MaterialsFramework: Vertical 50 x 50mm aluminium section.Horizontal 38 x 38mm aluminium section.

Roof: Comprising of 33mm thick composite panel withpre-finished steel internal face and GRP over-roof.

Glazed Panels: Standard choice of:6mm toughened glass.6mm clear high-impact thermoplastic sheet.

Alternative Glazing: Tinted or textured glass & high-impact thermoplastic sheet is avai lable to special order.

Blank Panels: 6mm GRP with textured internal faceand smooth semi-gloss external face with decorativemoulding.

Timetable Board: Polyester powder-coated aluminiumcase. Display area measures 720 x 270mm.

InstallationThe Heritage Shelter is supplied with adjustablespigoted legs to enable them to be either base fixed orset into concrete pockets.

ColoursFramework: Polyester powder-coating in a choice of:

Maroon RAL 3003Black RAL 9005Dark Green RAL 6005Dark Blue RAL 5003

Roof:Alaska Grey (RAL 7000) to internal face and Light Grey(BS 4800 [18.B.25]) to external face.

Blank Panels: Choice of:Maroon RAL 3003Black RAL 9005Dark Green RAL 6005Dark Blue RAL 5003

Decorative moulding highlighted in gold.

Seat: Choice of:Maroon RAL 3003Black RAL 9005Dark Green RAL 6005Dark Blue RAL 5003Grey BS 4800 (18.B.25)

Timetable Board: Black case

2884

3635 1505

3245 1115

* The above configuration is shown as an example. To discuss your requirements please telephone our sales office.


4/967

Carleton Canopy

Tel: 01253 600415

Fax: 01253 792558



Contemporary styled, curved design.

Carleton Canopies are contemporary-styled anddesigned to provide partial shelter from the weatherin designated outdoor areas. It is available inthree models of lengths: 1400mm, 2800mm and4200mm. The framework is manufactured in 100%recycled cast aluminium with high quality coatingfor low maintenance and long-term durability.

Carleton Canopy has a curved design to help naturalfall-off of rain and snow.

MaterialsCast ends: Recycled cast aluminium with Armorteccoating.Connector tubes: Aluminium extrusion with Armorteccoating.Roof: Twin-walled thermoplastic sheet.

SpecifcationsModel 1400 Model 2800 Model 4200

Length: 1400mm 2800mm 4200mmWidth: 981mm 981mm 981mmDepth: 385mm 385mm 385mmWeight: 24kg 41kg 58kg

InstallationCarleton Canopies are supplied with wall fixingssuitable for general brickwork that is in good condition.Fixing must be carried out by a competent person.Please note that due to the various forms of wallmaterials and construction available, it is recommendedthat professional advice is sought should any doubtexist regarding fixing arrangements.

ColoursCast ends: SilverConnector tubes: SilverRoof: Bronze tinted

1400 981

2800 981

4200 981

385

385

385

Model 1400

Model 2800

Model 4200


5/968

Tel: 01253 600415

Fax: 01253 792558



Eclipse Canopy

Tough, long-lasting one-piece moulding.

The Eclipse Canopy is a simple and stylishone-piece moulding that offers partial weather-protection. Its curved design helps natural fall-offof rain and snow. It is manufactured using toughDurapol material and is available in a choice offour standard colours. The canopy can be wall orpost-mounted, and sited either side-by-side or back-

to-back to create an ideal designated congregationarea for your environment.

MaterialsCanopy: Durapol.Mounting Posts: Armortec coated mild steel.

SpecifcationsLength: 1400mmWidth: 1000mmDepth: 450mmWeight:

Canopy: 17kgSurface mounted posts back-to-back: 26kgSurface mounted posts single: 21kgConcrete-in posts back-to-back: 27kgConcrete-in posts single: 20kg

Recommended height to the top of unit above ground

is 2455mm

InstallationWe supply standard tamper-proof fixings suitablefor general brickwork, which is in good condition.However, we strongly recommend that a survey of thewall area is carried out prior to installation. Fixing mustbe carried out by a competent person.Concrete-in posts are available as an optional extra.Surface-mounting posts are available as an optionalextra.

ColoursCanopy:

Black Sandstone

Millstone Whitestone

(Black contains recycled material and all colours arerecyclable after the products usable life.)

2455

1400 1000

29

2050

450

2005

500

Wall-mounted Single CanopyPost-mounted Single Canopy


6/969

Bi-Port Cycle Shelter

Attractive modern appearance.

Strong and robust design.


7/970

Tel: 01253 600415

Fax: 01253 792558



Contemporary design for modern developments.

Bi-Port Shelters offer the ultimate in contemporarydesign and are ideally suited to front of houseand high profile locations. The impressive steelframework is post-finished with an Armorteccoating. The end result is a gloss coating thatmaintains its pristine look over many years andhelps to prevent corrosion. Bi-Port Shelters are

delivered in assembled form for installation by thecustomer.

MaterialsFramework: Armortec coated steel.Cladding: Plastic-coated steel profiled, hot-dippedgalvanised steel panels with an embossed plasticcoating to the weather-face and a protective paintfinish to the reverse-face.Thermoplastic 4mm high-impact thermoplasticglazing. Protects against UVA and UVB radiation.

InstallationBi-Port Shelters are supplied ready for immediatesurface fixing on to concrete using the expandinganchor bolts provided.The minimum base size required is 4000 x 2400. Theprepared concrete base should be flat, level and a

minimum thickness of 200mm on to hardcore.

ColoursFramework:

Grey BS 4800 (00.A.09)Green RAL 6005Red RAL 3020Black RAL 9005

(Alternative colours are available upon request.)

Cladding:Plastic-coated steel. The weather-face is available in achoice of:

Nearest equivalentPoppy Red BS 4800 (04.E.53)Ocean Blue BS 4800 (18.C.39)Vandyke Brown BS 4800 (08.B.29)Goosewing Grey BS 4800 (10.A.05)

(Alternative colours are available upon request.)Thermoplastic: Clear.

876

2585

3825

2585

750

1870


8/971

Tel: 01253 600415

Fax: 01253 792558



CyclePad Cycle Stand

Relocatable Bicycle Stands.

CyclePad is a Registered EU Design.

CyclePad offers a revolutionary design whichreduces the time and cost of site installationto the absolute minimum. It is suited to streetfurniture applications because there is no needto excavate and re-lay existing ground surfacessuch as blockpaving or concrete. Each CyclePadis manufactured and delivered to site as a ready-

made freestanding concrete plinth complete with asingle hoop in stainless steel or Armortec coatedsteel. The contoured shape of the concrete plinthallows each CyclePad to be easily manoeuvredand interlinked together in a continuous line toform your desired layout. Manufactured from highquality and maintenance-free materials, CyclePadwill provide years of trouble-free service.

MaterialsHoop: 50mm tubular stainless steel (316 grade) orArmortec coated steelBase Plinth: Aggregate-finish concrete with curvedshape (to facilitate positioning side-by-side as acontinuous run of individual pads.)

Specifcations

Height: 848mmWidth: 843mmDepth: 997mmWeight: 140kg

InstallationCyclePads are free-standing and sel f-supportingstructures which are suitable for positioning on any flatand even surface, e.g. tarmac, concrete slabs, blockpaving etc. Where a multiple quantity of CyclePads arepositioned side-by-side in a continuous run, the hoopscan be front or back facing. A concealed locking barsystem is used to securely connect each CyclePad.

ColoursHoop: Natural brushed stainless steel or grey

Armortec coating.

Base plinth: Granite-effect surface with grey borders.

843997

848

700


9/9

www.glasdon.comGlasdon U.K. Limited

Architectural Products Department

Preston New RoadBLACKPOOLLancashireFY4 4UL

Tel: (01253) 600415Fax: (01253) 792558e-mail: [email protected]: www.glasdon.com

GP415/01Glasdon UK Ltd. 04/09. Glasdon reserve the right to alter price and specification without prior notice. ALL/ST

Glasdon Group is An Equal Opportunities Employer.

Architectural Shelters Canopies and Cycle Shelters[1]

Documents

Transcript of Architectural Shelters Canopies and Cycle Shelters[1]