Architectural & Security Bollards · • Pedestrian delineation and separation • Ram raid...

A r c h i t e c t u r a l & S e c u r i t y B o l l a r d s

B o l l a r d s i n t h e e n v i r o n me n t

A d i v e r s e r a nge o f ma t e r i a l s & s t y l e s

D e s i g n i ng f o r s e c u r i t y a p p l i c a t i o n s

B o l l a r d s

Leda is Australia’s largest manufacturer of Architectural and Security Bollards with over 500 models to choose from. Leda maintains an absolute commitment to quality and has developed special manufacturing methods and equipment to ensure a consistently high quality standard for all its products.

The Leda Advantage

• Innovative products

• Stylish contemporary designs

• High vandal resistance

• Reliable and low maintenance

• Cost efficient

• Superior installation methods

• Unparalleled technical advice withproduct choice and specification

• Independently-tested, crash-rated barriers

Qua l i t yAs part of its policy of ongoing improvement, Leda works continually to advance the effectiveness and efficiency of all its products. When selecting or specifying from within this handbook, it is advisable to consult directly with Leda to ensure that specifications have not been altered. Leda can also advise on the suitability of your Securapost bollard selection for the proposed application.

Se r v i ceEvery Leda client is guaranteed unrivalled service, advice and technical support. Products are distributed and supported through branch offices or distributors throughout Australia and New Zealand.

War ran tyAll Leda products carry a full comprehensive12 month warranty. Optional warranty extensions are also available if and when Preventative Maintenance Contracts (PMC) are entered into.

Mate r i a l s and F in i shesMost Leda bollards are available in a pre-primed painted finish, galvanised mild steel or stainless steel. Leda utilises its own robotic cutting / welding and powder coating equipment to ensure a consistent, high quality finish to all of its products.

Stainless steel provides an attractive, durable, low maintenance and corrosive-resistant product. Securapost stainless steel products are normally supplied in Grade 304 (Schedule 10) although Grade 316 is available on request. Linished or electro- polished finishes are available.

Leda has developed a comprehensive ‘care and maintenance’ instruction booklet for all their stainless steel products which is available free upon request, or it can be downloaded from the Leda website: www.ledasecurity.com.au

The L eda Advant age

✆ 1 3 0 0 7 8 0 4 5 0

Product specifications displayed in this handbook are accurate at time of printing. Improvements and additions are continually being made to the bollard range. Check with your nearest Leda Sales office that the designs and specifications displayed are still current.

Comprehensive brochures and technical literature on the complete range of Leda’s architectural and security products are available on request or visit the website: www.ledasecurity.com.au.

Copyright © Leda Security Products Pty Ltd 2010. All rights reserved. No part of this work may be produced or utilised in any form or by any means, electronic or mechanical, including photocopying, recording or in any information storage or retrieval system, without the prior written permission of Leda Security Products Pty Ltd.

✆ 1 3 0 0 7 8 0 4 5 0

1

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

G ene ra l > Conten t s

Gene ra l

Bollards in the Environment 2

Materials 4

Styles 5

Designing for Security Applications 6

Impact Resistance 9

Installation 10

Specification Clauses 14

P roduc t Range

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast Concrete 47

Lighting 55

Power Distribution 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Options & Accessories 102

✆ 1 3 0 0 7 8 0 4 5 0

2

Gene ra l > Bo l l a rd s i n the Env i ronment

The increasing use of motor vehicles in urban environments demonstrates the need to instal effective barrier systems which allow pedestrian flow while precluding vehicle encroachment. Bollards are exceptionally effective in that role.

Bo l l a rd s i n the Env i ronment• Building forecourts and perimeters

• Shopping centres and malls

• Government sites and utilities

• Industrial complexes

• Public and community areas

• Schools and university campuses

• Alfresco dining areas

Many models are available across both security and non-security applications to allow continuity of bollard type throughout a project. Some architectural bollards – such as the Slimline stainless steel Lighting range – can also be manufactured to provide a security option.

Secu r i t y So lu t i ons It is extremely important that architects and specifiers select the appropriate product and impact resistance, while still achieving the aesthetic considerations for the site.

• Pedestrian delineation and separation

• Ram raid protection

• Perimeter security

• Vehicle access control

• Hostile vehicle mitigation

To assist in the selection process, Leda has prepared impact ratings for all standard bollards – higher security is achieved by a combination of varying bollard diameters, wall thickness and embedments.

> Refer to p9 for the Impact Ratings Table and the relative strengths of Leda security bollards.

With more than 500 models to choose from, Leda’s Securapost bollard range is the largest and most comprehensive available. Leda bollards are stylish, diverse, and are designed for a broad range of applications. While aesthetics remain an important consideration in selecting a design, it is also important to consider pedestrian safety and property protection. A busy thoroughfare with 60-80km/h traffic would understandably require bollards with a far higher impact rating than areas adjacent to carparks or malls where vehicle speeds are restricted to about 10km/h or 20km/h.

✆ 1 3 0 0 7 8 0 4 5 0

Locking &Removable

Bollards

Fixed InsituBollards

RetractableBollards

BaseplateBollards

LightingBollards

3

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

G ene ra l > Bo l l a rd s i n the Env i ronment

Cont inu i t y of Des i gnFor continuity of design throughout

a project, the full range of stainless steel bollard styles is available in the same size and

finish for many models.

Leda bollards are manufactured from a range of modern building materials, each providing different characteristics and functionality.

Mate r i a l s• Stainless Steel

• Steel

• Aluminium

• Plastic

• Timber

• Pre-cast Concrete

A range that offers architects and specifiers a wide collection of bollards from which to choose.

> Refer to p4 for more information on materials.

Cont inu i t y of Des i gnThe stainless steel range alone provides a comprehensive selection of designs – many in various styles – allowing continuity of design to be maintained throughout the project.

Leda offers the most comprehensive range of architectural bollards available.

> Refer to p5 for more information on styles.

✆ 1 3 0 0 7 8 0 4 5 0

4

Gene ra l > Mate r i a l s

S ta in l e s s S tee lClean smooth lines accentuating an ageless finish make stainless steel the architects’ choice. Available in Grades 304 or 316, it is an attractive, durable, low maintenance and corrosive-resistant product that will last indefinitely.

Leda bollards are manufactured from a diverse range of materials, each providing a range of different characteristics and functionality. Security bollards are normally manufactured from stainless steel or steel, with a limited selection manufactured in pre-cast concrete.

F in i sh ingLeda maintains its high quality finish of product through the practice of single-site manufacturing in its own production facilities – the largest purpose-built perimeter security manufacturing facility in the Asia-Pacific region.

Wherever possible, Leda also endeavours to finish the majority of products inhouse, allowing it to maintain its commitment to quality product throughout all phases of the production process. (The exception to this is hot dipped galvanising which is applied by others.)

Leda’s modern paintshop provides powder coating or wet spray (2 pack polyurethane) painting.

Leda stainless steel bollards are normally manufactured from Grade 304, while Grade 316 is available if required or specified.

Automatic linishing machinery allows polishing of all stainless steel to various industry standards. Unless otherwise requested they are linished (polished ) to a hairline finish.

Electro-polishing is also available – this minimises the possibility of ‘tea staining’ and is recommended for corrosive and saltwater locations.

P la s t i cThe Leda bollard range uses both virgin and 100% recycled plastic. Plastic is low maintenance, has vandal-resistant properties and is extremely long lasting. It is also used as replaceable sleeves in some models.

S tee lHeavy duty and extra heavy duty galvanised steel pipe in C350 Grade high strength steel is used in the majority of models. Functional, durable and featuring high impact resistance properties, steel also has the advantage of being particularly suited to powder coating in different colours and finishes.

Alumin iumSuitable for casting into both traditional and modern shapes. Aluminium provides an excellent surface for electrostatic powder coated finishes.

T imbe rThe world’s traditional building material is featured in large round and square profiles using natural hardwoods such as iron bark and spotted gum. Especially popular with designers and architects wishing to enhance nautical and ‘eco’ themes in their projects.

P re - ca s t Conc re teTheir substantial bulk provides a greater visual deterrent than other bollards while providing an attractive and durable alternative for landscape architects. The range includes round, square, spherical and pyramid shapes. Some models are impact rated for security applications.

✆ 1 3 0 0 7 8 0 4 5 0

Fixed InsituSecurity models available

Locking &Removable

Security models available

Manual & AutomaticRetractable

Security models available

Fixed Insitu &Fixed Baseplate

LightingSecurity models available

FixedBaseplate

5

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

G ene ra l > S ty l e s

Typical stainless steelmodels illustrated

Lock ing & Removab leWhile all Leda bollards can be fixed permanently, the major feature of the range is the Locking & Removable bollard. This unique and patented feature (AP 624290) found only in the Leda range, allows easy removal and replacement of bollards. Keying is conveniently located at waist height.

F i xed In s i tuTo provide optimum strength and impact resistance, it is important that the bollards be firmly embedded into the pavement. All Leda bollard designs cater for in-ground installation. Fixed insitu bollards can also be epoxy-glued into core-drilled holes, providing an effective and economical installation method. If bollards are damaged, they can normally be removed and replaced easily without interference to the surrounding pavement.

F i xed Base P l a teWhile Leda manufactures and supplies base plate models, they are generally not recommended for use in conjunction with motor vehicles or in security applications. Masonry anchors used in the installation of these models provide very low impact resistance in the event of vehicular contact. They are most suited for use as a demarcation barrier or where shallow concrete depth precludes fixed insitu models.

L igh t ingIn order for architects and specifiers to utilise the same bollard design throughout a project, Leda has developed lighting bollards that not only carry the Leda style and appeal but are put together with security in mind. The vandal-resistant lighting range embraces stainless steel, steel and aluminium.

Ret ra c t ab leAvailable in manual, semi-automatic and automatic models in a range of diameters and wall thicknesses to meet different security levels. Retractable bollards can operate at a 2-second raise and lower speed and finish flush with the surrounding pavement in the open position. They are ideal for vehicular access control applications including security.

Leda bollards are designed in a number of styles to suit a range of applications and project designs. Not all styles are manufactured in all materials. Security bollards are designed for high impact resistance and are not available in fixed baseplate models.

✆ 1 3 0 0 7 8 0 4 5 0

6

Gene ra l > Des ign ing fo r Se cu r i t y App l i c a t i ons

Bollards used in security applications are typically deployed as either Static Bollards or Active Bollards.

S ta t i c Bo l l a rd s Static Bollards forming part of a passive security barrier are used mainly to enforce a stand-off measure while complementing and enhancing an urban landscape. They may also be used to define a secure perimeter zone.

Ac t i ve Bo l l a rd s Active Bollards, sometimes called ‘Automatic Bollards’ (while not always the case), are automated or manual retractables or removable bollards. Active Bollards are mainly deployed at vehicle access control points, emergency access points or vehicle entrances into buildings.

Active Bollards may be operated as follows:a) AutomaticFeaturing a drive mechanism which may be pneumatic or hydraulic. The drive mechanism allows the bollard to rise or lower through instructions relayed through a Programmable Logic Controller (PLC).

b) ManualThis typically involves an operator lifting or lowering a retractable bollard by hand. A subset of this version includes a gas-assisted type bollard which reduces the need for the operator to exert strength to raise or lower the bollard.

c) RemovableA bollard embedded to a particular depth by way of manual lifting trolley or by merely removing it by hand. This type of bollard is secured in position by way of a mechanical lock.

✆ 1 3 0 0 7 8 0 4 5 0

7

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

G ene ra l > Des ign ing fo r Se cu r i t y App l i c a t i ons

Modern day threats have seen rapid development of vehicle barrier systems capable of resisting impacts from vehicles of different sizes, speeds and attack methodologies, resulting in a further split of bollards into the following categories:

Secu r i t y Leve l sa) Access Control BollardsTypically used to allow consensual access into a secure area but are not designed to sustain impact from a vehicle driven with hostile or criminal intent.

b) Anti-Ram BollardsTypically used on sites where there is a need to control consensual vehicles but to also deter and prevent unauthorised access. These bollards tend to be physically robust in appearance but may not necessarily have been formally tested against vehicle impact. They are used widely across most commercial applications such as shopping centres, retail outlets and car yards.

c) Counter-terrorist BollardsBollards which are typically designed for the retention of hostile vehicles to mitigate threats from vehicle-borne improvised explosive devices (VBIED). Such bollards are mainly used to secure high security sites – sensitive government installations, airports, embassies and the like – and are typically subject to vehicle crash tests in compliance with independent government-administered standards such as PAS 68 or SCEC. They have control protocols embedded as part of any project delivery initiative to ensure they are installed in compliance with the test parameters.

Bo l l a rd Con f i gu ra t i onsa) Single line of bollards This configuration represents the most common method of deploying bollards, which in turn act as an enforceable stand-off line. This is typically the most cost effective configuration to deploy.

b) Interlocking BollardsThis configuration is usually used to create a containment arrangement with inner and outer active barriers into which vehicles must drive through. Programmable Logic Controllers (PLCs) are usually used to prevent both sets of bollards remaining open simultaneously. This solution offers a much higher degree of security but typically reduces vehicular flow.

c) Final Denial BollardsThis bollard configuration (with or without an access control barrier) is usually left in the open position so as not to hamper the flow of traffic. It is usually adopted in locations where available room and standoff are not an issue but where traffic flow and ease of movement is. It relies on the proviso that adequate time is available for a guard force to engage a potential hostile vehicle and to raise the bollards.

Se le c t ing and Des ign ing a Bo l l a rd S cheme The following are typical areas which need to be addressed during the course of selecting and designing a bollard solution:

a) Definition of a threat vehicle and method of attackIt would be prudent during a threat assessment to determine a potential type of vehicle likely to attack the site. Typical benchmarks such as access into the site, speed and orientation will usually have significant bearing towards building a threat profile. For example, a shopping centre with ATMs located on a floor with direct vehicle access can potentially expect a smaller vehicle capable of ramming an ATM at speeds unlikely to injure or kill its driver, while obstacles such as restricted overhead clearance, planters and courtesy benches will typically form obstructions against larger vehicles.

Once a potential attack vehicle profile is established, an assessment may be made on the vehicle’s estimated weight to determine type of bollard.

✆ 1 3 0 0 7 8 0 4 5 0

8

Gene ra l > Des ign ing fo r Se cu r i t y App l i c a t i ons

Leda is the only Australian bollard manufacturer to have undertaken government-endorsed impact testing using different vehicle weights (2500kg, 3500kg and 7500kg) at various speeds.

b) Vehicle dynamics assessment to establish vehicle mass and impact speed. Speed and vehicle mass form a critical area when assessing the type of bollard and its corresponding footing to deploy. The transfer of force in the form of kinetic energy (KE) when a vehicle engages with a bollard is a key determinant dictating the type, size, wall thickness and footing design of any proposed bollard. A simplified but somewhat imperfect description of KE, measured by kilojoules (kJ) in the following table provides a rough view of energy loads which need to be considered.

Impact Vehicle Mass Speed (kg) (km/h) 1500 2500 3500 7500 30000 Impact Energy (kJ) 16 15 25 35 74 296 32 59 99 138 295 1185 48 133 222 311 667 2667 64 237 395 553 1185 4741 80 370 617 864 1852 7407

Kinetic energy can be determined with the following:

KE = 0.5 mv2

Where: KE = kinetic energy m = mass in kilograms v = velocity in metres per second

Example: A 2500kg vehicle travelling at 40km/h will have a kinetic energy of 154kJ. KE = 0.5 x 2500 x (40,000 ÷ (60 x 60))2

= 0.5 x 2500 x 11.112

= 0.5 x 2500 x 123.432 = 154,290 J = 154kJ

Having determined the KE Bollard Rating required, refer to the Impact Ratings Table opposite to select an appropriate bollard. To assist in the selection process Leda has sub-divided impact ratings into 3 Classes.

Class 3 – High level protectionGovernment and high profile buildings, defence sites, anti-terrorist protection.

Class 2 – Medium level protectionUsed where vehicle speed is limited and other security protection provided.

Class 1 – Low level protectionRam raid protection or where lower vehicle mass and speed are involved.

c) Identification of an enforceable perimeter to determine the most practical or appropriate location for a bollard to be installed.Locating bollards in a suitable and appropriate manner is a necessary condition in getting maximum benefit from your proposed installation.

Suitably-located bollards will enhance a streetscape, allow pedestrian access and establish a clear demarcation line. Inappropriately located bollards may impede both vehicular and/or pedestrian traffic flow and increase installation costs.

✆ 1 3 0 0 7 8 0 4 5 0

Class3

Class2

Class1

0

100

310

630 80

80+

70

60

50

40

30

20

10

0

630+

kJ km/h

IRB200F C

IBS250F B

IRB300F C

PR442F CRPR442F C

IRB200F BIRB300F APR442F B

RPR442F B

PR441F CRPR441F CIBR150F C

SSP150FP68 ASSP150FP68 B

PR441F BRPR441F BIBR200F A

HIG150R C

HIG200R B

HIG150R A

HIG200R C

SSP150FP68 C

Disclaimer: The above impact ratings are based on LPS 1246 : Draft 1m 24/03/03. Leda Security Products Pty Ltd makes no claims as to the validity of this wholly independent testing. For specific impact resistance related to any bollard or site, Leda’s offices should be contacted to evaluate engineering requirements. Leda is constantly working towards further validating and testing its products for accurate impact ratings. The above impact ratings are therefore subject to change as further engineering investigations are being made constantly. Please contact Leda offices for further advice. Copyright © Leda Security Products Pty Ltd. Securapost ® is a trademark owned by Leda Security Products Pty Ltd. All rights reserved. No part of this work may be reproduced or utilised in any form or by any means, electronic or mechanical, including photocopying, recording or in any information storage and retrieval system, without the prior permission of Leda Security Products Pty Ltd.

ProductCode

ImpactRating

Material& Style

Refer to Leda foranti-terrorist products

VehicleSpeed

9

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

Impac t Ra t ings Tab le Ratings shown are based on:• 2,500kg vehicle at the indicated speeds. • Max bollard deflection of 30° to plane of impact.• Vehicle bumper height of 380mm. • kJ is the kinetic energy of vehicle at impact.

Gene ra l > Impac t Ra t ings

The Impact Ratings Table is intended as a general guide to the relative strength of various Leda bollards. Higher levels of security can be achieved by selecting a bollard with a greater wall thickness and/or a larger nominal bore. While the table identifies security bollards that are available as standard product, many Leda bollards can also be modified, strengthened or re-engineered to improve their impact resistance.

For correct security installation, reinforced concrete footing details for Class 1, 2 and 3 are available from Leda Security.

> Refer to p10-13 for further general information on footings and installation for both security and non-security applications.

✆ 1 3 0 0 7 8 0 4 5 0

10

Gene ra l > In s t a l l a t i on

Non Secu r i t y App l i c a t i onsInstallation for non security applications is not as critical, however there are some basic guidelines that should be followed.

Concrete core drillingCore drilling is Leda’s recommended method of bollard installation, providing the concrete slab is deep enough to provide a secure installation. Cable detectors and X-ray equipment can be used where there is risk of striking underground cables or pipes.

Concrete core drilling allows bollards to be installed accurately, quickly and economically towards the end of the project, ensuring that they are in pristine condition and do not restrict access during the building works. It is preferred by architects and building contractors and also allows easy retro-fitting of bollards on existing sites.

Locking and Removable bollards are easily inserted into the snug-fitting hole after core drilling, and the latch groove formed to accommodate Leda’s patented locking mechanism. You do not have to use a steel sleeve

Fixed Insitu bollards are epoxy glued into position after core drilling. While providing a permanent secure installation, damaged bollards can be removed and replaced (using a pipe wrench) without the need to dig up the concrete and disfigure the surface pavement.

Fixed Baseplate bollards are fixed to the pavement surface using masonry anchors.

Concrete footingsWhile reinforced concrete (RC) slabs are ideal for anchoring bollards in many

applications, it may not always be possible, and individual or strip RC footings may be required.

While strip footings construction is a more expensive option than individual footings, it provides a more structurally sound solution and greater security.

Having selected the right bollard for the project, it is important that it is installed correctly. Leda will assist in carrying out the bollard installation using experienced staff and contractors to meet all regulatory industry standards.

Where required, project managers will oversee the various trades to ensure Leda’s demanding quality and OH&S standards are met. Specifications and requirements may vary depending on whether the bollard installation is for non-security or security projects.

✆ 1 3 0 0 7 8 0 4 5 0

Low SecurityInstallations

400 x 400Code ISF1

600 x 600Code ISF2

750 x 750Code ISF3

900 x 900Code ISF4

900 x 1500Retractable BollardsCode ISF5

Fixed Insitu Bollardshowing recommendedRC strip footingCode ISF1

Ground level

Bollardsat maximum 1400 cts

ø6 ties at 335 cts

30Mpa concrete 350 wide25 minimum cover to steel

ø12 deformed bars

Locking & Removable Bollardshowing recommended RC footingCode ICF

Ground level

2 x ø6 ties at 400 cts

Fibreglass sleeve(shown cut-away for clarity)

30Mpa concrete350 x 35025 minimum cover to steel

4 x ø12 deformed bars440 long

Security Bollardsat maximum 1400 cts

High SecurityInstallations

11

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

G ene ra l > In s t a l l a t i on > Typ ic a l F oo t i ng s

Secu r i t y App l i c a t i onsIn security applications, it is essential that footings are designed to meet the impact resistance and performance required by the bollards – and to meet the proposed threat.

By participation in government-administered vehicle crash tests, Leda must provide the tested and approved footings used during such tests with no variation to the design or size unless with the expressed permission of the certifying authority.

Leda’s engineering division has vast experience in the design and installation of footings for perimeter security systems and can assist through all phases of planning and design.

Footings for bollards are typically strip footings if bollards deployed are used in security applications. A well-designed tortionally-reinforced continuous concrete beam footing has demonstrated that actual rotation and displacement of foundations are minimal.

To simplify designs, the dimensions will normally fall within the sizes illustrated at right.

Photograph above shows a failed bollard installation in Adelaide by one

of Leda’s competitors. It emphasises the importance of using

the correct strip footings in security and high impact applications.

✆ 1 3 0 0 7 8 0 4 5 0

600

600

6400

600

600

Maximum

1400

Maximum

1400

Maximum

1400

Maximum

1400

12

Gene ra l > In s t a l l a t i on > Se cu r i t y F oo t i ng s

Secu rapos t Bo l l a rd s t e s ted to PAS 68 S tanda rd*In what is believed to be a world first in the application of barrier materials technology in bollards, Leda Security has successfully impact-tested their 150NB fixed bollards at the Transport Research Laboratory (TRL) in the United Kingdom.

Testing was carried out by TRL in compliance with Publicly Available Specification 68 (BSI PAS 68). One key objective was for the creation of a new generation of physically smaller bollards capable of providing enhanced impact protection against terrorist-instigated hostile vehicle attacks.

The tests each involved a single-sized 150NB stainless steel fixed bollard filled with a Leda-designed barrier mix to strengthen it under impact and to enhance its cutting resistance.

> Refer to the Security Bollards section for further information on Barrier-infill bollards.

With the bollards mounted in a shallow rigid foundation, two successful tests were conducted at 48km/h using firstly a 2500kg 4x4 SUV vehicle and then a 3500kg van. A third test with a shallow embedment bollard proved ineffective in restraining the impacting vehicle, highlighting the critical importance of footing design.

The final successful test was with a 7500kg truck travelling at 32km/h. Leda gratefully acknowledges the support provided by the government of the United Kingdom in the course of this testing.

* PAS 68 – Impact test specifications for vehicle security barriers.This Publicly Available Specification (PAS) has been prepared to address the needs of organisations who want assurance that vehicle security barriers will provide the level of impact resistance that is sought.

PAS 68 identifies impact test methods, tolerances, test vehicle type and vehicle performance criteria that need to be met in order to conform to PAS 68.

PAS 68 cites a classification system for the performance of vehicle security barriers and their supporting foundations when subjected to a single horizontal impact.

✆ 1 3 0 0 7 8 0 4 5 0

M12 chemical anchors

8mm gussets

350 x 350x 10mm plate

Type ASSBP1

Type BSSBP2

Type CSSBP3

Width variable.Dependant upon

impact rating required

13

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

G ene ra l > In s t a l l a t i on > Sha l l ow Mount Foo t i ng s

When installing bollards on existing sites it may not always be possible to carry out civil works to lay the necessary concrete footings. This can be especially difficult when installing to existing high-profile sites.

In many instances, excavation has to be manually dug around existing services which can be time consuming and expensive. On some sites, it may be impossible to obtain the required depth of footing required.

Leda has developed effective bollard anchoring methods for ease of installation on sites unable to accommodate standard depth footings.

Note: All footing designs should be subject to structural engineering certification.

Sha l l ow MountBo l l a rd Foo t ingsThe Shallow Mount system allows installation of both architectural and security bollards in less than 200mm depth footings. The system is designed to cater for a range of vehicle impact loadings and is a cost-effective solution over conventional reinforced concrete footings.

Suspended S l absBo l l a rd In s t a l l a t i onWhere existing concrete slabs cannot be tampered with or baseplate bollards must be used, Leda’s engineers have developed alternative anchoring systems to improve the impact performance of the bollards.

Type ALarge 10mm thick baseplate fitted to underside of the concrete slab.

Type BThis option allows the bollard to be embedded deeper with steel gussets supporting the underside of the baseplate.

Type CUses a sandwich panel approach which is very effective in distributing the load throughout the concrete slab.

While baseplate options shown are designed for 150NB pipe bollards, other diameters can be accommodated.

✆ 1 3 0 0 7 8 0 4 5 0

14

Gene ra l > Spec i f i c a t i on C l auses

Locking & Removable BollardsBollards shall be Leda Model (insert Model No.) Locking & Removable Bollards or equivalent, manufactured from (insert material /wall thickness) in accordance with manufacturer’s specification. The bollards will be capable of meeting impact resistance level (insert IR level from table) classification. Key operation will be located at waist height for ease of operation. The locking mechanism will fully engage when key is turned to prevent unauthorised removal without key. Steel and aluminium bollards will be pre-treated and electrostatically powder coated (insert colour) to AS3715, while stainless steel bollards will be linished to a level 4 finish.Installation. Bollards to be installed at a maximum of 1400mm centres and to a height above ground of (insert bollard height). Option A. Concrete core drilling into suitable pavement to give 1mm clearance around the circumference of the bollard to allow insertion to a minimum depth of 190mm.Option B. Steel sleeves should be cast into reinforced concrete slab or footings in accordance with Leda’s installation specifications.

Type / Name

Model No.

Material

Wall Thickness

IR Level

Height

Diameter

Colour / Finish

Type / Name

Model No.

Material

Wall Thickness

IR Level

Height

Diameter

Colour / Finish

Type / Name

Model No.

Material

Wall Thickness

IR Level

Height

Diameter

Colour / Finish

Fixed Insitu BollardsBollards shall be Leda Model (insert Model No.) Fixed Bollards or equivalent, manufactured from (insert material /wall thickness) in accordance with manufacturer’s specification. The bollards will be capable of meeting impact resistance level (insert IR level from table) classification. Steel and aluminium bollards will be pre-treated and electrostatically powder coated (insert colour) to AS 3715, while stainless steel bollards will be linished to a level 4 finish.Installation. Bollards to be installed at a maximum of 1400mm centres and to a height above ground of (insert bollard height).Option A. Concrete core drilling into suitable pavement to give 1mm clearance around the circumference of the bollard and epoxy glue to be applied to the bollard surface to a depth of 300mm and to the core hole to allow effective anchorage of the bollard.Option B. The bollards shall be cast into reinforced concrete individual or strip footings, ensuring that the bollard is inserted to a minimum depth of 300mm in accordance with Leda’s installation specifications.

Fixed Baseplate BollardsBollards shall be Leda Model (insert Model No.) Fixed Baseplate Bollards or equivalent, manufactured from (insert material /wall thickness) in accordance with manufacturer’s specification. 50mm x 50mm gussets on four faces, will be fillet welded to the vertical pipe face and the baseplate. Welds will be cleaned and treated prior to painting. Steel and aluminium bollards will be pre-treated and electrostatically powder coated (insert colour) to AS 3715, while stainless steel bollards will be linished to a level 4 finish.Installation. Bollards to be installed at a maximum of 1400mm centres and to a height above ground of (insert bollard height) by bolting to a reinforced concrete slab using 12mm x 100mm masonry or chemical anchors.

> Visit www.ledasecurity.com.aufor further details or downloads on specification clauses.

✆ 1 3 0 0 7 8 0 4 5 0

15

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > S l im l ine

Slimline

• Classic, clean smooth lines

• Range of diameters 80NB - 300NB

• Varying wall thickness provides security and higher impact ratings

• Linished or electro-polished finish

• Choice of styles –Locking & RemovableFixed InsituFixed BaseplateLightingRetractable

Leda stainless steel bollards are normally manufactured from Grade 304. Grade 316 is available if specified. Electro-polishing minimises the possibility of ‘tea staining’ and is recommended for corrosive or saltwater locations.

80NB

100NB

125NB

150NB

200NB

300NB

✆ 1 3 0 0 7 8 0 4 5 0

Slimline 80NBMaterial 80NB (88.9) x 3.05 / 5.49 / 7.62mm Grade 304 stainless steel pipe

Finish Linished or electro-polished

Slimline 90/100NB

Material 90NB (101.6) x 3.05mm 100NB (114.3) x 3.05mm Grade 304 s/steel pipeFinish Linished or electro-polished

Material 125NB (141.3) x 3.40mm Grade 304 s/steel pipeFinish Linished or electro-polished

Locking &RemovableSSP80R A 3.05SSP80R B 5.49SSP80R C 7.62

FixedInsitu

SSP80F A 3.05SSP80F B 5.49SSP80F C 7.62

FixedBaseplate

SSP80B A

Screw-downSupermarket Bollard

SSB80F A 3.05

FixedInsitu

SSP100F A

FixedBaseplateSSP100B A

Retractablemodels

available,refer

Retractablesection.

Lightingmodels

available,refer

Lightingsection.

Minimum350 x 350 x 500 deep.Security Bollards require strip footings, refer Installation section.

150nominal

Perforatedsleeve

epoxy-fixedinto cored hole

100

1 11

1

1

FixedInsitu

SSP125F A

FixedBaseplateSSP125B A1

Locking &RemovableSSP125R A

125NB100NB90NB

1

11 1

Slimline 125NB

Reflective tapeoption


Screw-downinstallation

Uniqueinstallationrequires asingle M20

chemicalanchor



Optionalbronze motifwith your crest or logo

Top View


Top View

Lighting Retractable


SSB90FAWW 3.05 1

32mmthreaded rodwelded tobaseplate

Baseplate

166

Baseplate

196

Baseplate

223

16


✆ 1 3 0 0 7 8 0 4 5 0

Slimline 150NB

Slimline 150NB

Material 150NB (168.3) x 3.40 / 7.11 / 10.97mm Grade 304 stainless steel pipe




Locking & Removable

SSP150R A 3.40SSP150R B 7.11SSP150R C 10.97

Fixed Insitu


SSS150F A 900 highSSS150F B 1200 high

(Sleeve only)

Fixed BaseplateSSP150B A1

22

122

Fixed InsituTraffic LightsSSP150T A 3.40SSP150T B 7.11SSP150T C 10.97

123

Fixed InsituSecurity Lighting

SSL150F B 7.11SSL150F C 10.97

12

Complete Lighting rangerefer Lighting section.

3.40mm wall

7.11mm or10.97mm wall

Lifting Trolleysavailable for easy removalof heavierL&R bollards.Refer Accessories section.

Retractable models availablerefer Retractable section.

2mm thick172mm ID.

For use with150NB

IR bollards.Refer

Security section.

For use withRetractable bollards



Uniqueinstallationrequires asingle M20chemicalanchor

170nominal


Screw-downSupermarket

BollardSSB150F A 3.40 1

Optional bronzemotif with your crest or logo

Top View

Lighting Retractable

Sleeve

Baseplate

286

17

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Slimline 200NB

Slimline 300NB







Retractablemodels

available,refer

Retractablesection.

Fixed Insitu


223

Fixed BaseplateSSP200B A

Fixed Insitu


233

Fixed BaseplateSSP300B ASSP300B B

300

410

Baseplate

BaseplateOptional bronze motifwith your crest or logo

Top View

Optional bronze motifwith your crest or logo

Top View

Retractable

300

300

18


✆ 1 3 0 0 7 8 0 4 5 0

19

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > Rega l

80NB

100NB

125NB

150NB

200NB

300NB

Regal

• Classic, clean smooth lines

• Sloping top stops rubbish collection

• Range of diameters 80NB - 300NB

• Varying wall thickness provides security and higher impact ratings

• Linished or electro-polished finish

• Choice of styles –Locking & RemovableFixed InsituFixed Baseplate


✆ 1 3 0 0 7 8 0 4 5 0

Regal 80NB

Regal 100NB

Locking &Removable

SSR80R A 3.05SSR80R B 5.49SSR80R C 7.62

FixedInsitu

SSR80F A 3.05SSR80F B 5.49SSR80F C 7.62

FixedBaseplateSSR80B A

TypicalSide Elevation

45°


FixedInsitu

SSR100F A



11

1

1

FixedBaseplate

SSR100B

11 1

Baseplate



Material 100NB (114.3) x 3.05 mm Grade 304 stainless steel pipe




170nominal



Uniqueinstallationrequires asingle M20

chemical anchor


SSRB80F A 3.05 1

Baseplate

166

196

45°

20


✆ 1 3 0 0 7 8 0 4 5 0

Regal 125NBMaterial 125NB (141.3) x 3.40mm Grade 304 stainless steel pipe


Material 150NB (168.3) x 7.11 / 11.00mm C350LO ERW linepipe 150NB (168.3) x 3.40 / 7.11 / 10.97mm Grade 304 stainless steel pipeFinish Steel. Galvanised or electrostatically powder coated Stainless steel. Linished or electro-polished

Regal 150NB

Locking & Removable

SteelSR150R B 7.11SR150R C 11.00

Stainless SteelSSR150R A 3.40SSR150R B 7.11SSR150R C 10.97

Fixed BaseplateSSR150B A

112

12

Fixed Insitu

SteelSR150F B 7.11SR150F C 11.00

Stainless SteelSSR150F A 3.40SSR150F B 7.11SSR150F C 10.97

112

12


Lifting Trolley available for easy removal of heavier L&R bollards.Refer Accessories section.



FixedInsitu

SSR125F A 1

Locking &RemovableSSR125R A 1

FixedBaseplateSSR125B A




SSSR150F A 900 highSSSR150F B 1200 high

(Sleeve only)

2mm thick172mm ID.

For use with150NB IR bollards.

Refer Security section.

45°

45°

SleeveStainless Steel

900

900

Baseplate

223

Baseplate

286

200

300

21

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Regal 200NB

Regal 300NB







Fixed Insitu


223


Fixed Insitu


233


300

410

Baseplate

Baseplate



15°

15°

300

300

22


✆ 1 3 0 0 7 8 0 4 5 0

23

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > Urban

Urban

• Combining the beauty of timber and steel

• Stainless steel Grade 304 or hot dipped galvanised mild steel frames

• Merbau hardwood timber infills

• Choice of styles –Locking & RemovableFixed InsituFixed baseplateLighting

Other timbers can be accommodated for larger orders.Electro-polishing stainless steel minimises the possibility of ‘tea staining’ and is recommended for corrosive or saltwater locations.

FixedInsitu

FixedBaseplate

LightingRange

✆ 1 3 0 0 7 8 0 4 5 0

Urban 2100

Urban 4100Material Steel – 10mm flat bar – mild steel / stainless steel

Hardwood – Spotted Gum or Iron Bark

Finish Hot dipped galvanised / linished (Level 4)

Fixed InsituMild SteelURB2150F

Stainless SteelSURB2150F

Fixed BaseplateMild SteelURB2150B

Stainless SteelSURB2150B

Fixed InsituMild SteelURB4150F

Stainless SteelSURB4150F

Fixed BaseplateMild SteelURB4150B

Stainless SteelSURB4150B

900

900

100

152 152

160 150

100

300

300

Top View / Baseplate

270

270

Top View /Baseplate

200

200

Material Mild steel – 150 UC mild steel Stainless steel – 10mm plate Hardwood – Spotted Gum or Iron BarkFinish Hot dipped galvanised / linished (Level 4)

24


✆ 1 3 0 0 7 8 0 4 5 0

Urban

900

900

900


Mild SteelURB2L A

Stainless SteelSURB2L A

Mild SteelURB2L B

Stainless SteelSURB2L B

Mild SteelURB2L C

Stainless SteelSURB2L C

152 152

152 152

163 163

Illumination is by a super bright wall light in a single direction. A second lamp can be added to illuminate in the opposite direction – add ‘D’ to end of the bollard code.Mild Steel URB2L B DStainless Steel SURB2L B D

Lighting is provided on four faces by a super bright strip light to provide 360° illumination.

Illumination is by a super bright LED array in a single direction. A second lamp can be added to illuminate in the opposite direction – add ‘D’ to end of the bollard code.Mild Steel URB2L A DStainless Steel SURB2L A D

electrical conduit

electrical conduit

electrical conduit

Square Light

Round Light

Slot Light


270

270


270

270


270

270

25

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

26

Bi cyc l e Pa rk ing P roduc t s | ra i l s , ra c k s , l o c ke r s & c age s

Commerc i a l & Indus t r i a l Ga te s | cant i l e v e r, t ra c k & sw ing

Tu rns t i l e s & Ac ces s Con t ro l | f u l l he ight & ha l f he ight

Pa rk ing Space P ro te c to rs | manua l & au toma t ic

Veh i cu l a r Ac ces s Con t ro l | boom ga t e s & b i - fo l d ga t e s

Phys i ca l Se cu r i t y P roduc t s | t y re s p i ke s & ba r r ie r s

Ma r k e t L e a de r s i n P hy s i c a l S e c u r i t y & Ve h i c u l a r A c c e s s C o n t r o l P r o du c t s

✆ 1 3 0 0 7 8 0 4 5 0

27

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > Mode rn

Modern

• Contemporary designs

• Low maintenance stainless steel

• Choice of styles –Locking & RemovableFixed InsituFixed baseplate


Rectangular

Twirl

Flexible

Screen

Breeze

Wave

Corso

✆ 1 3 0 0 7 8 0 4 5 0

Locking &Removable

SSW80RA

FixedBaseplateSSW80BA

Material 80NB (88.9) x 3.05mm Grade 304 stainless steel pipe


Material 150NB (168.3) x 3.40mm Grade 304 stainless steel pipe



Baseplate

286

FixedInsitu

SSW80FA


Locking &RemovableSSW150RA

FixedBaseplateSSW150BA


FixedInsitu

SSW150FA

Twirl 80NB

Twirl 150NB

1

1 1

1

Baseplate

166

28


✆ 1 3 0 0 7 8 0 4 5 0

SquareMaterial Grade 304 stainless steel RHS (Rectangular Hollow Section)


100 x 100x 3mm RHS

s/steel sleeve s/steel sleeve

150 x 150x 5mm RHS

recommendedconcrete footing400 x 400 x 500 deep

Locking &Removable

SST11R

FixedBaseplate

SST11BFixed Insitu

SST1515FFixed Baseplate

SST1515BFixed Insitu

SST11F

Locking &Removable

SST1515R

200

200

Baseplate

270

270

Baseplate

RectangularMaterial Grade 304 stainless steel RHS (Rectangular Hollow Section)


FixedBaseplate

SST115B

FixedInsitu

SST115F

Locking &Removable

SST115R

100 x 50 RHSx 2mm

200

150

Baseplate

29

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Fixed BaseplateSSM151B

These designs, used with a variety of stainless steel

or glass infill panelsalso lend themselves

to balustrade applications.





BreezeMaterial 12mm Grade 304 stainless steel plate


WaveMaterial 12mm Grade 304 stainless steel plate


Top View /Baseplate

200

200

Top View /Baseplate

200

200

30


✆ 1 3 0 0 7 8 0 4 5 0





Top View /Baseplate

50mm holes

CorsoMaterial 12mm Grade 304 stainless steel plate


270

270

RoundFixed Insitu

JSR150

SquareFixed Insitu

JSS150

Lighting modelsalso available

refer Lighting section.

ScreenMaterial Grade 304 stainless steel mesh

Finish Linished (Level 4)

168

Lighting

177177

Top View /Baseplates

286

300

300

31

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Fixed InsituIRP1200S

Fixed BaseplateIRP1200F

Sleeve

FlexibleMaterial 60mm PVC tube

Finish External sleeve 80NB aluminium or stainless steel

Helps minimise accidental damage with vehicular impacts.Ideal for use in high traffic areas or where there is a high likelihood of bollards being impacted by vehicles. ie. Where motorists are unfamiliar

with the location, as in hospital entry or carparks.

SignageMaterial 150NB (168.3) x 3.40mm Grade 304 stainless steel pipe


Sign BollardSSP150FSFront View Side View

750 or900 high

EXIT

EXIT

900

Hinged at the baseallowing it to move 30° from the vertical

80NBaluminium or stainless steelsleeves to suitalso available

Baseplate

200

60

32


✆ 1 3 0 0 7 8 0 4 5 0✆ 1 3 0 0 7 8 0 4 5 0

33

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > Lux fo rd

Luxford

• Unique ‘sculptured’ designsusing standard off-the-shelf profiles

• Illuminated Smart Bollards

• Choice of materials –Mild steelAluminiumStainless steel

• Baseplate fixing only

Helix

Cube

Fallen

Split Square

Split Round

Smart Bollards

IlluminatedSignage &

Advertising

Trishaft

Saw

Mild steel models are available with hot dipped galvanised finish or electrostatically powder coated in a range of colours.Leda stainless steel bollards are normally manufactured from Grade 304. Grade 316 is available if specified. Electro-polishing minimises the possibility of ‘tea staining’ and is recommended for corrosive or saltwater locations.

✆ 1 3 0 0 7 8 0 4 5 0

Saw TrishaftMaterial Mild Steel / Aluminium / Stainless SteelFinish Electrostatically powder coated or linished (stainless steel)

Material Mild Steel / Aluminium / Stainless SteelFinish Electrostatically powder coated or linished (stainless steel)



Split Round Split Square

LT200B Mild Steel LAT200B Aluminium LST200B Stainless Steel

LS209B Mild Steel LAS209B Aluminium LSS209B Stainless Steel

Round LS259B Mild Steel LAS259B Aluminium LSS259B Stainless Steel

Square LS275B Mild Steel LAS275B Aluminium LSS275B Stainless Steel

900

100 x 10mm flat bar

50 x 10mm flat bar

900 800

150NB (168.3mm) pipe sections

150 x 50mmRHS

Front View

Front View Side View

Side View

286

Top View /Baseplate

Top View /Baseplate

270

100 100

200

200


160

168168 150150Front View Side View

200


270

34


✆ 1 3 0 0 7 8 0 4 5 0

286

Cube Helix

Material 150 x 150 x 5mm SHSFinish Electrostatically powder coated or linished (stainless steel)

Fallen Smart Bollard

Material 32NB (42.2) x 2.77mmFinish Electrostatically powder coated or linished (stainless steel)

Material 200NB (219mm) aluminium / stainless steel pipeFinish Electrostatically powder coated or linished (stainless steel)

Material Ø 150NB (168.3mm) pipeFinish Electrostatically powder coated or linished (stainless steel)

LC209B Mild Steel LSC209B Stainless Steel

LH200B Mild Steel LSH200B Stainless Steel

900

F200B Mild Steel AF200B Aluminium SF200B Stainless Steel

ASM200B Aluminium SSM200B Stainless Steel

Ø42mmpipe

900 600

100

200

The illuminated Smart Bollard’s versatile design lends itself for use in a variety of foyers, concourses and other public spaces. Illumination using hard wired connection is also an option.Insert Panels x 3176 x 750 x 3mm Polycarbonate SheetSB200S

150 168

Top View /Baseplate

295

200

300

150

Front View

219

160

900 900Top View /Baseplate

Top View /Baseplate

300


35

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

36


Architectural BollardsSecurity Bollards

Cantilever & Track Sliding GatesSingle & Double Swing GatesBi-fold Gates

Bicycle Rails & RacksBicycle LockersBicycle CagesBicycle Enclosures

Parking Space ProtectionAutomatic & Manual Operation

Preventative MaintenanceFlexible Programs24 Hour Emergency Service

Registered trademarks of Leda Trading Pty Ltd

✆ 1 3 0 0 7 8 0 4 5 0

37

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > Trad i t i ona l

MajorSCC

Saturn

65 Series

Victorian

Guardsman

Warden

Aegis

Ambassador

Commodore

Parisian

Traditional

• Tried and proven designs

• Choice of materials –Mild steelAluminium

• Choice of styles –Locking & RemovableFixed InsituFixed Baseplate

Leda aluminium bollards are available polished (linished) or electrostatically powder coated.Leda steel bollards are available electrostatically powder coated in a range of colours

✆ 1 3 0 0 7 8 0 4 5 0

Major

SCC

Material 80NB (88.9) x 5.9mm extra heavy duty gal pipe / 3mm steel plate

Finish Electrostatically powder coated in a range of colours

Material 150NB (165.1) x 7.11 / 11.0mm heavy duty steel pipe

Finish Electrostatically powder coated or 2 pack epoxy painted

Locking & RemovableAM95R

Front View

Fixed insituAM95F

Front View

TypicalTop View

TypicalRear View

900

300 Minimum400 x 400 x 500 deep.Security Bollards require strip footings, refer Installation section.


Developed for Sydney City Council to complement existing street furniture.SCC bollards have an extremely high impact rating

minimising the cost of ongoing maintenance and/or replacement. They are designed to be installed in conjunction with conventional strip footings or

Leda’s shallow mount footing design. Refer Installation section.

Locking & RemovableSCC150RB 7.11SCC150RC 11.00

Fixed insituSCC150FB 7.11SCC150FC 11.00

RetractableSCC150ARBB 7.11SCC150ARBC 11.00

Retractable availablerefer Retractable section.

1035

130

220

150

38


✆ 1 3 0 0 7 8 0 4 5 0

Ambassador

Material 150NB (165.1) x 5.0 / 5.4 / 11.0mm med duty aluminium / steel pipe

Finish Aluminium – Electrostatically powder coated in a range of colours

Polished finish is also available on aluminium models

Steel – 2 pack wet spray

Material 150NB (165.1) x 5.0 / 5.4mm medium duty aluminium / steel pipe


Polished finish is also available on aluminium models

Aegis


Locking & RemovableAluminium

AAE15OR A 5.0Steel

AE15OR A 5.4AE15OR B 11.0

Fixed InsituAluminium

AAE15OF A 5.0Steel

AE15OF A 5.4AE15OF B 11.0

Fixed BaseplateAluminium

AAE150B A 5.0Steel

AE150B A 5.4

Locking & RemovableAluminium

AA15ORSteel

AS15OR

Fixed InsituAluminium

AA15OFSteel

AS15OF

Fixed BaseplateAluminium

AA15OBSteel

AS15OB

12

12




Optionalpolished top

270

270

39

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Commodore

Parisian

Material 80NB (88.9) x 3.25mm aluminium pipe


Material 80NB (88.9) x 3.25mm aluminium pipe


Locking & Removable

AC100R

FixedInsituAC100F

FixedBaseplate

AC100B


Locking & Removable

AP100R

Fixed InsituAP100F

FixedBaseplate

AP100B






1020

166

166

40


✆ 1 3 0 0 7 8 0 4 5 0

65 SeriesSaturn



Material 65NB (76.1) x 3.6mm medium duty galvanised pipeFinish Electrostatically powder coated in a range of colours

Material 80NB (88.9) x 5.9mm heavy duty galvanised pipeFinish Electrostatically powder coated in a range of colours

Locking & Removable

SP657R

Locking & Removable

SS11R

FixedInsituSS11F

FixedBaseplate

SS11B

Locking & Removable

AV97R

FixedInsituAV97F

FixedBaseplate

AV97B

FixedInsituSP657F

FixedBaseplate

SP657B

Square Baseplate

Round Baseplate

VictorianMaterial Outer – 192mm cast aluminium Inner – 65NB (76.1) x 3.6mm medium duty galvanised pipeFinish Electrostatically powder coated in selected heritage colours

BaseplateOuter bollardcast aluminium

Inner pipe150NB galvanised pipe

Baseplate

270

900

41

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Guardsman

Warden

Fold Down BollardFDB75B

The perfect low cost vehicular access control device.Also ideal for protecting your car space

and a good solution for suspended slab installationsor where core drilling is not possible.

Material FDB75B – 50mm galvanised RHS FDB90B – 65NB (76.1) x 3.6mm medium duty (C250 Grade) gal pipe / 65NB (76.1) x 3.6mm stainless steel (Grade 304) pipeFinish Electrostatically powder coated in black or industrial yellow / Linished or electro-polished

Locking pin Ø43mm x 50mm

Side ViewFront View

Recommended for vehicular access control or parking protection and a good solution for suspended slab installations or where core drilling is not possible.

Material 80NB (88.9) x 5.9mm heavy duty (C250 Grade) galvanised pipe 20NB (26.9) x 2.6mm medium duty galvanised pipe

Finish Galvanised or electrostatically powder coated in a range of colours

Locks inflat position Fold Down Bollard

SteelFDB90B

Stainless SteelSFDB90B

Side View

Locking pin Ø43mm x 50mm

Front View

100mmvehicle

clearance

1000

83

800

270

26

50 x 50

80


200

200

200


200

42


✆ 1 3 0 0 7 8 0 4 5 0

Leda plastic bollards are manufactured from 100% recycled material. Stainless steel caps and straps are highly recommended for all timber bollards to minimise splitting and provide extended service life.

43

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > Env i ro

Recycled Plastic

PolyethyleneSleeves

SolidHardwood

Enviro Plastic

• Square, round and architectural models

• Environmentally friendly recycled plastic

• Textured attractive finish

• Range of sizes

Enviro Timber

• Natural beauty of timber

• Square and round models

• Spotted Gum and Iron Bark hardwood

✆ 1 3 0 0 7 8 0 4 5 0

Recycled PlasticMaterial 100% recycled plastic

Finish Charcoal

Material 100% recycled plastic

Finish CharcoalRecycled Plastic

Fixed InsituRPR80F

Fixed InsituRPR100F

Fixed InsituRPR125F

Fixed InsituRPS85F

Fixed InsituRPS110F

Fixed InsituRPS135F

Fixed InsituRPR135F

Minimum400 x 400 x 500 deep.

1000

Bollards can be easily drilled to accommodate chain or rope

Optional1, 2 or 3machinedgrooves

Bollards can be easily drilled to accommodate chain or rope

Optional1, 2 or 3machinedgrooves

400


1000

400

Round

Square

TypicalSection

17

TypicalSection

23.5

85 110 135

100 12580 135

44


✆ 1 3 0 0 7 8 0 4 5 0

Plastic Sleeves Material 170mm OD x 4.5mm low density polyethylene sleeve

150NB (165.1 x 5.4mm) steel pipe

Finish Limited range of heritage colours / fluorescent option

Material 192mm OD x 4.0mm low density polyethylene sleeve

80NB (88.9mm) x 5.9mm extra heavy duty galvanised pipe

Finish Limited range of heritage colours

Plastic Sleeves

Ambassador

Victorian

Sleeve OnlyPAS150F

Locking &Removable

PV97R

FixedInsituPV97F

SleeveOnlyPV97S

Sleeve OnlyPAS155F

Sleeve OnlyPAS150 FF

(Fluorescent)


NoteSteel pipe bollards to suit impact rating requirements.Refer Industrial and Security bollards sections

Replaceablepolyethylene sleevefits over pipe –minimises damagefrom shopping trolleys

Cut-awayshowing inner pipe

Security grub screwfixing at base

45

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Material Spotted Gum Class 3 – S2 (SG)

Iron Bark Class 1 – S1 (IB)

Marine grade stainless steel caps and straps

Material Spotted Gum Class 3 – S2 (SG)

Iron Bark Class 1 – S1 (IB)

Marine grade stainless steel caps and straps

Round

Square

Fixed InsituSpotted Gum

TBR27F SGIron BarkTBR27F IB


STBR27F SGIron BarkSTBR27F IB

CapLS10271

StrapLS10272

CapLS10267

StrapLS10268


TBS22F SGIron BarkTBS22F IB


STBS22F SGIron BarkSTBS22F IB

Hardwood

Hardwood

Cap

55

200

282

282

282

50

Strapchain support

Cap

Strapchain support

55

200

50

46


✆ 1 3 0 0 7 8 0 4 5 0

47

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > P re - ca s t Conc re te

Leda pre-cast concrete bollards are manufactured using off-white cement and are lightly sand-blasted to provide an attractive exposed finish. Other surface finishes may be possible – check with your Leda sales office.

Pre-cast Concrete

• Large range of aesthetic shapes

• Sturdy and strong

• Effective visual deterrent

• Minimum maintenance

Russell Square

Russell Round

Richmond

Roman

Colossus

CamdenSpherical

CamdenDome

Cube

Log

Centurion

Classic Square

Cylinder

Windsor

Cairo

Frustrum

✆ 1 3 0 0 7 8 0 4 5 0

Russell Square

Fixed Insitu150NB InsertPR441F B 7.11PR441F C 11.0

12

Minimum 600 x 600 x 750 deep.Security Bollards require strip footings, refer Installation section.

Depth of pipe insertion is determinedby impact rating requirements

Section Top View

Cruciform reinforcementand barrier mix infill also available,refer Security section.

Fixed Insitu200NB InsertPR442F B 8.2PR442F C 12.7

23

Section / Elevation

Material 30MPa concrete 150NB (168.3) x 7.11 / 11.0mm linepipe 200NB (168.3) x 8.2 / 12.7mm linepipe Finish Off-white, lightly sand blasted

Russell Round

Fixed Insitu150NB InsertRPR441F B 7.11RPR441F C 11.0

12

Section Top View


Fixed Insitu200NB InsertRPR442F B 8.2RPR442F C 12.7

23

Section / Elevation

Material 30MPa concrete 150NB (168.3) x 7.11 / 11.0mm hot dipped galvanised linepipe 200NB (168.3) x 8.2 / 12.7mm hot dipped galvanised linepipeFinish Off-white, lightly sand blasted


Depth of pipe insertion is determinedby impact rating requirements

Cast-in stainless steel

ferrulesfor lifting

Showncut-awayfor clarity

300

300


ferrulesfor lifting

Showncut-awayfor clarity

48


✆ 1 3 0 0 7 8 0 4 5 0

Richmond

Fixed InsituRCB265F


Front View

Top View

Core drill orconcrete footing

Fixed InsituRCB267F

Front View



Fixed InsituRCB269F

Front View

Fixed InsituWCB265F

Front View Top View

Fixed InsituWCB267F

Front View

Material 30MPa concrete / 80NB (88.9) x 5.0mm heavy duty galvanised pipe

Finish Off-white, lightly sand blasted


Finish Off-white, lightly sand blastedWindsor

500

750

1000

49

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Cairo

Flat on GroundPCB48A

with Rail AccessPCB48B

Fixed InsituPCB48C


Top ViewSide View Front View

Top View



Finish Off-white, lightly sand blasted / grey, smooth off-the-form


Finish Off-white, lightly sand blasted / grey, smooth off-the-formFrustrum

Cast-instainless steelferrulesfor lifting

Threaded eyebolts.Refer Accessories section.

Rail Access

100

760

130

600

480

Flat on GroundFRBOL

Side View

750

200

Core holeØ70

Fixed InsituFRBOLA

Front View



80

320

480

600

250

200

200

50


✆ 1 3 0 0 7 8 0 4 5 0

Roman

Fixed InsituPRB50F

Fixed InsituSTDBOL

Section

Top View







Finish Off-white, lightly sand blasted / grey, smooth off-the-formCylinder


840

235

Core holeØ32

300

Section

75

50

Top View

300

200

51

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Classic Square Material 30MPa concrete / 80NB (88.9) x 5.0mm heavy duty galvanised pipe


Centurion

Top View

Top View



900

500

170

160 300

300

Fixed InsituCP441FB 7.11CP441FC 11.0

12


SectionFront View

Fixed InsituCLBOL

SectionFront View

Material 30MPa concrete / 150NB (168.3) x 7.11 / 11.0mm linepipe


125

125

200

900700

300


ferrulesfor lifting

52


✆ 1 3 0 0 7 8 0 4 5 0

Camden

Colossus

Spherical with FlatBLBOL







Spherical

Fixed InsituPSB400F

Dome

Fixed InsituPMB400F

Dome

Flat on GroundPMB400A

Top View

Top View

Cast-in stainless steel lifting ferrule(for ease of handling)

Threaded eyebolts for lifting.Refer Accessories section.

400

675

750

300 Minimum350 x 350 x 500 deep.Security Bollards require strip footings, refer Installation section.

Cast-in stainless steel lifting ferrule(for ease of handling)

Threaded eyebolts for lifting.Refer Accessories section.

53

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Cube






Finish Off-white, lightly sand blasted / grey, smooth off-the-formLog

500

Flat on GroundPCL55A

Fixed InsituPCL55F



500

500

Flat on GroundPCL205A

Fixed InsituPCL205F

1980

An attractive and effective vehicle access control delineator or seating module.

An attractive and effective vehicle access control delineator or seating module.

200

200

Cast-in stainless steellifting ferrules(for ease of handling)

Threaded eyeboltsfor lifting.Refer Accessoriessection.

Threaded eyeboltsfor lifting.Refer Accessoriessection.

Cast-in stainless steel lifting ferrules(for ease of handling)

54


✆ 1 3 0 0 7 8 0 4 5 0

55

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > L igh t ing

SlimlineSlotted

SlimlineSlotted

SlimlineSquare

AmbassadorSlotted

AmbassadorSquare

CommodoreSlotted

UrbanSquare

UrbanRound

UrbanSlotted

ScreenRound

ScreenSquare

ParisianSlotted

Lighting

• High vandal-resistance models

• Stylish contemporary and elegant traditional designs

• Tough polycarbonate lenses fitted internally

• Fixed and baseplate models

• Choice of materials

• Lighting arc options for most models

Leda stainless steel and aluminium lighting bollards are polished (linished). Aluminium lighting bollards are also, along with steel lighting bollards, available electrostatically powder coated in a range of colours

✆ 1 3 0 0 7 8 0 4 5 0

Minimum 3.05mmwall thickness

OptionalFixed insitu installationorBaseplate installation

Optionallouvres

Internally fitted4.5mm thickpolycarbonate lens

OptionalSquare cutoutsfor maximumilluminationorVertical cutoutsfor maximumvandal resistance

Optionalcover plate

Continuousconcealed weldunderneath

Stainless steelcast cap withrecessedsecurity screws

Electricalconduit

Protectedlamp holderterminal block

Optional9W-23Weasily accessibleinterchangeablefluorescant lamps

56

P roduc t Range > L igh t ing > F ea tu re s

MaterialTwo main materials are available – stainless steel or aluminium, with the Urban Range featuring timber infill panels on mild steel or stainless steel uprights. Stainless steel is ideal for corrosive environments like coastal areas and is recommended if security or impact resistance is an issue. Aluminium is an ideal product for powder coating and can be coloured to your requirements.

Size (Diameter)The standard range is available in both stainless steel and aluminium and in 80NB (88.9mm) and 150NB (168.3mm) outside diameters. Security lighting bollards are also available in 150NB stainless steel.

Louvres (Optional) Louvres are primarily used to reflect light downwards to cut down glare. They are ideal for pedestrian walkways and driveways.

LensesGenerally, either slotted or square. Vertical slotted cutouts are best suited where vandalism is a potential problem. Square cutouts offer maximum illumination.

Lighting ArcEither 180° (half circle) or 360° (full circle). 180° lighting is more suitable for lighting walkways while 360° lighting is best in a plaza or park.

LampsFive lamp options ranging from 9W (mood lighting) to 42W (safety illumination). Refer table opposite for a guide to lamp selection.

Power requirements & installationMains 240V. All electrical components are manufactured to Australian standards. Bollard is earthed. All wiring and electrical connection work is to be carried out by a licensed electrician. Refer to the Installation section for general installation details.

General MaintenanceAccess is only available using security tools provided by Leda. Lamp replacement does not require a licensed electrician as no electrical components are exposed during this operation. For stainless steel bollards, a stainless steel care manual is available on request.

Slimline 150NB illustrated

✆ 1 3 0 0 7 8 0 4 5 0

109876543210

-1-2-3-4-5-6-7-8-9

-10

C90

C270 x (m)

y (m)

C0 C180

0 2 4 6 8 101 3 5 7 9-10 -8 -6 -4 -2-9 -7 -5 -3 -1

2.0

0.7

0.3

0.1

Light Spreadon visible surface

(metres)

PerpendicularLightingBollard

MaintainedHorizontalIlluminance

(lux)

No Louvresincreases light spread

With louvresreduces light spread

reduces glare

No Louvresincreases light spread

With louvresreduces light spread

reduces glare

57

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

I so lux d i ag ramsIsolux diagrams indicate the distribution of illuminance on a visible surface. Lines indicated (Maintained Horizontal Illuminance) are those tabled in A guide to lighting bollard spacing on the following page. The lighting bollard is located perpendicular to the plane. All distances are shown in metres.

While material selection and fixing methods may be major factors in selecting a lighting bollard design, it is also important to consider lighting options for particular applications.

Optional louvres and a choice of lamp sizes coupled with bollard spacing allows for a range of light intensities to suit feature lighting, safety or security applications.

A gu ide to l amp se l e c t i on Watts Lamp Ballast Constant Approx Bollard Application specifi cation type temp rating lamp life sizes

9 Compact lamps Self ballasted 90°C 5,000-10,000 hrs 80 & 150NB Anywhere

ES TC S

13 Compact lamps Self ballasted 90°C 5,000-10,000hrs 80 & 150NB Anywhere ES TC D

23 Compact lamps Self ballasted 90°C 5,000-10,000hrs 80 & 150NB Anywhere ES TC D

The table on the p58 is intended as a guide in selecting lighting bollard options to suit your requirements.

Def in i t i onsLumen (lm) light emitted in a unit solid angle

from a point source.

Lux (lx) a unit of illumination defined as one lumen (lm) per square metre.

P roduc t Range > L igh t ing > Pho tome t r i c s

360° circularsuitable for plazas and parks

L igh t ing A rc180° semi-circularsuitable for walkways and cycleways

✆ 1 3 0 0 7 8 0 4 5 0

Xcalculations based

on max 1.5m

X + 1

d

recommen

ded b

ollard s

pacing

d - 1

edge o

f path for every metre increase

back from the path (x + 1)bollard spacing should

decrease one metre (d - 1)

58

The following bollard spacing guide is designed to give specifiers a general insight into recommended minimum bollard spacings.For further information, it is recommended to refer to the standard on which this guide is based:

AS/NZS1158.3.1:1999Road lighting - Pedestrian area (category P) lighting - Performance and installation design requirements.

Lighting designers will be able to apply the photometric data available for Leda’s lighting bollards.

A gu ide to l i gh t ing bo l l a rd spac ing

Spacings in metres Selection criteria lamp 9W 13W 23W 32W 42W ▼ lumens 600 900 1800 2400 3200 Pedestrian Risk Need to Maintained With No With No With No With No With No cycle of enhance Horizontal Louvres Louvres Louvres Louvres Louvres Louvres Louvres Louvres Louvres Louvres activity Crime prestige Illuminance

Slotted 360 degree cut outsN/A High N/A 2.00 2.1 2.1 2.5 2.5 3.0 3.2 3.4 3.7 3.7 4.2High Medium High 0.70 3.1 3.4 3.5 3.9 4.1 5.0 4.5 5.6 5.0 6.3Medium Low Medium 0.30 3.8 4.8 4.39 5.4 5.3 7 5.7 8.2 6.0 8.7Low Low N/A 0.14 4.8 6.2 5.4 7.2 6.4 9.1 6.9 10.3 7.6 11.1Slotted 180 degree cut outsN/A High N/A 2.00 4.2 4.2 5.0 5.0 6.0 6.4 6.9 7.5 7.4 8.4High Medium High 0.70 6.2 6.8 7.0 7.9 8.3 10.1 9.1 11.3 10.0 12.6Medium Low Medium 0.30 7.8 9.6 8.7 10.9 10.6 14.0 11.4 16.4 12.0 17.4Low Low N/A 0.14 9.6 12.4 10.8 14.5 12.8 18.2 13.8 20.6 15.2 22.2Square 360 degree cut outsN/A High N/A 2.00 2.5 3.0 2.9 3.4 3.5 4.3 3.7 5.1 4.1 5.5High Medium High 0.70 3.4 4.5 3.8 4.9 4.6 6.0 5.0 6.6 5.4 7.2Medium Low Medium 0.30 4.3 5.6 4.7 6.3 5.7 7.5 6.1 8.4 6.5 9.1Low Low N/A 0.14 5.2 6.9 5.7 7.6 6.9 9.3 7.2 10.5 7.8 11.2Square 180 degree cut outsN/A High N/A 2.00 5.0 6.0 5.8 6.8 7.0 8.6 7.5 10.2 8.2 11.0High Medium High 0.70 6.8 9.0 7.6 9.9 9.2 12.0 10.0 13.2 10.8 14.4Medium Low Medium 0.30 8.7 11.2 9.5 12.6 11.4 15.0 12.3 16.8 13.1 18.2Low Low N/A 0.14 10.5 13.8 11.5 15.3 13.8 18.6 14.5 21.0 15.6 22.4

Selection CriteriaSelect the highest level of all three criteria relevant to the site where the bollards will be installed. Example. If there is a very low risk of crime but high pedestrian and cycle activity then it is recommended that the ‘Maintained Horizontal Illuminance (Eh maint) lx,’ value be 0.7 lx. You will then be able to determine globe wattage, if louvres are required and the distances between each bollard.The selection criteria and minimum lux levels are based on AS/NZS1158.3.1:1999 Tables 1.2 and 2.1. Information is reproduced with the permission of Standards Australia.Spacing DistancesAll measurements (d) are in metres and represent the maximum distances for spacing bollards in a line.If slotted 180° bollards with no louvre and a 26W globe were to be installed in a high crime environment, the bollards should be positioned 6.4m apart to ensure a minimum of 2.0 lx level of light is maintained. Lux (lx) is the volume of light (lumens) from the light source divided by the area.

Distance from pathIf a line of bollards in a medium risk of crime environment with low pedestrian and cycle activity were to be positioned 2.5m back from a path, a Square cut out 32W bollard with louvres would go from 10m to 9m spacings.Distances listed can also be used as recommended spacings across from each other. Example. A 5m wide path in a high crime risk area that requires slotted cut out bollards with louvres positioned 1.5m back from the pathway (dimension x) will be beyond the recommended maximum spacing. The maximum spacing possible is 7.4m (42W) and the bollards are at 8 metres (5m + 1.5m + 1.5m = 8m). The options are to remove the louvres or bring the line of bollards closer to the pathway (x). Example. The bollard spacings provided are based on the line being 0m - 1.5m back from the path (x). For every metre a bollard is moved beyond the 1.5m point, the spacings (d) should be bought closer together by the same amount (1 for 1).The recommended distances (based on AS/NZS1158.3.1:1999) are calculated from photometric testing conducted by independent laboratories for Leda Security Products Pty Ltd. Further photometric data is available on request.

P roduc t Range > L igh t ing > Bo l l a rd Spa c i ng s

✆ 1 3 0 0 7 8 0 4 5 0

400

Code ISF1

Code ICF

59

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > L igh t ing > I ns t a l l a t ion

Most Leda lighting bollards can be either cast in (fixed insitu) or bolted down (fixed baseplate). Conduits containing mains power cables should be laid when forming up the concrete slab or footing, with provision for cables to be left protruding an additional one metre to allow efficient length for later connection and future maintenance.

> Please contact your Leda sales officefor further information on installation or technical advice.

✆ 1 3 0 0 7 8 0 4 5 0

Coverplate

Optionalcoverplate

175

Baseplate

166

Material / Aluminium 80NB (88.9mm) x 3.25mm aluminium pipeFinish Electrostatically powder coated in a range of colours

Stainless Steel 80NB (88.9mm) x 3.05mm Grade 304 SS pipe Linished or electro-polished

Insitu Lighting

Stainless SteelSSL80F2 180SSL80F3 360

AluminiumFAL80F2 180FAL80F3 360

Louvres not availablefor 80NB models

Stainless SteelSSL80B2 180SSL80B3 360

AluminiumFAL80B2 180FAL80B3 360

Baseplate Lighting


electricalconduit300

900

Material 80NB (88.9mm) x 3.25mm aluminium pipeFinish Electrostatically powder coated in a range of colours

1020

Insitu LightingACL80F2 180ACL80F3 360

Baseplate LightingACL80B2 180ACL80B3 360

Coverplate

Optionalcoverplate

175

electricalconduit300 300


1010

Optionalcoverplate

electricalconduit


Insitu LightingAPL80F2 180APL80F3 360

Baseplate LightingAPL80B2 180APL80B3 360

ParisianCommodore

Louvresnot available for80NB models

Louvresnot available for80NB models

Slimline 80

Aluminium 80

Slotted

Slotted

Baseplate

166

Coverplate

175

Baseplate

166

60


✆ 1 3 0 0 7 8 0 4 5 0

Urban

900

900

900


Mild SteelURB2L A

Stainless SteelSURB2L A

Mild SteelURB2L B

Stainless SteelSURB2L B

Mild SteelURB2L C

Stainless SteelSURB2L C

152 152

152 152

163 163

Illumination is by a super bright wall light in a single direction. A second lamp can be added to illuminate in the opposite direction – add ‘D’ to end of the bollard code.Mild Steel URB2L B DStainless Steel SURB2L B D

Lighting is provided on four faces by a super bright strip light to provide 360° illumination.

Illumination is by a super bright LED array in a single direction. A second lamp can be added to illuminate in the opposite direction – add ‘D’ to end of the bollard code.Mild Steel URB2L A DStainless Steel SURB2L A D

electrical conduit

electrical conduit

electrical conduit

Square Light

Round Light

Slot Light


270

270


270

270


270

270

61

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

FAL150F2 180FAL150F3 360SSL150F2 180SSL150F3 360FS150F2 180FS150F3 360

Aluminium

S/Steel

Steel

Aluminium

S/Steel

Steel

FAL150F4 180FAL150F5 360SSL150F4 180SSL150F5 360FS150F4 180FS150F5 360

FAL150B2 180FAL150B3 360SSL150B2 180SSL150B3 360FS150B2 180FS150B3 360

FAL150B4 180FAL150B5 360SSL150B4 180SSL150B5 360FS150B4 180FS150B5 360

Material / Aluminium 150NB (165.1mm) x 3.00mm aluminium pipeFinish Electrostatically powder coated in a range of colours Stainless Steel 150NB (168.3mm) x 3.4 / 7.11mm Grade 304 SS pipe Linished or electro-polished Steel 150NB (165.1mm) x 5.40mm galvanised mild steel pipe Electrostatically powder coated in a range of colours

300

900

electricalconduit

Coverplate

Optionalcoverplate

Baseplate

286

294

300

900

electricalconduit

Coverplate

Optionalcoverplate

294

Slimline 150Slotted

Square


SSL150F B 7.11 (2/3)SSL150F C 10.97 (2/3)

12


SSL150F B 7.11 (4/5)SSL150F C 10.97 (4/5)

12

Optionallouvres

Optionallouvres



SECURAPOST

SECURAPOST

SECURAPOST

SECURAPOST

Baseplate

286

10

9

8

7

6

5

4

3

2

1

0

C90

C270

y (m)Slotted26W lampwith louvres

x (m)

C0C180

0 2 4 6 8 101 3 5 7 9

All values inlux / 1800 lumensMaximum = 4.82Height = 1.0m

2.00.7

0.30.1

2.0 (41.5%)0.7 (14.5%)0.3 (4.2%)0.1 (2.9%)

10

9

8

7

6

5

4

3

2

1

0

C90

C270 x (m)

C0C180

0 2 4 6 8 101 3 5 7 9

Slotted26W lampno louvresAll values inlux / 1800 lumensMaximum = 8.78Height = 1.0m

2.0 (22.8%)0.7 (8.0%)0.3 (3.4%)0.1 (1.6%)

2.0

0.7

0.3

0.1

10

9

8

7

6

5

4

3

2

1

0

C90

C270

y (m)Square26W lampwith louvres

x (m)

C0C180

0 2 4 6 8 101 3 5 7 9


2.00.7

0.3

0.1

2.0 (18.1%)0.7 (6.3%)0.3 (2.7%)0.1 (1.3%)

10

9

8

7

6

5

4

3

2

1

0

C90

C270

y (m)Square26W lampno louvres

x (m)

C0C180

0 2 4 6 8 101 3 5 7 9


2.0 (9.3%)0.7 (3.2%)0.3 (1.4%)0.1 (0.6%)

2.0

0.7

0.3

0.1

62


✆ 1 3 0 0 7 8 0 4 5 0

10

9

8

7

6

5

4

3

2

1

0

C90

C270

y (m)Slotted26W lampwith louvres

x (m)

C0C180

0 2 4 6 8 101 3 5 7 9


2.00.7

0.30.1

2.0 (41.5%)0.7 (14.5%)0.3 (4.2%)0.1 (2.9%)

10

9

8

7

6

5

4

3

2

1

0

C90

C270 x (m)

C0C180

0 2 4 6 8 101 3 5 7 9

Slotted26W lampno louvresAll values inlux / 1800 lumensMaximum = 8.78Height = 1.0m

2.0 (22.8%)0.7 (8.0%)0.3 (3.4%)0.1 (1.6%)

2.0

0.7

0.3

0.1

10

9

8

7

6

5

4

3

2

1

0

C90y (m)Square26W lampwith louvres

C0C180

0 2 4 6 8 101 3 5 7 9


2.00.7

0.3

0.1

2.0 (18.1%)0.7 (6.3%)0.3 (2.7%)0.1 (1.3%)

10

9

8

7

6

5

4

3

2

1

0

C90

C270

y (m)Square26W lampno louvres

x (m)

C0C180

0 2 4 6 8 101 3 5 7 9


2.0 (9.3%)0.7 (3.2%)0.3 (1.4%)0.1 (0.6%)

2.0

0.7

0.3

0.1

Material 150NB (165.1mm) x 3.00mm aluminium pipe


Material 150NB (165.1mm) x 3.00mm aluminium pipe


Fixed InsituLighting

AAL150F2 180AAL150F3 360

Fixed BaseplateLighting

AAL150B2 180AAL150B3 360

300

1050

electricalconduit

Coverplate

Optionalcoverplate

294

SECURAPOST

SECURAPOST

Ambassador

Ambassador Square

SECURAPOST

Fixed InsituLighting

AAL150F4 180AAL150F5 360

Fixed BaseplateLighting

AAL150B4 180AAL150B5 360

300

1050

electricalconduit

Coverplate

Optionalcoverplate

294

SECURAPOST



Optionallouvres

Optionallouvres

Slotted

Square

Baseplate

286

Baseplate

286

63

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

RoundFixed Insitu

JSR150L A (Half)JSR150L B (Full)

SquareFixed Insitu

JSS150L A (Half)JSS150L B (Full)

ScreenMaterial Grade 304 stainless steel mesh

Finish Linished (Level 4)

168 177177

300

300

Illumination is bysuper bright LED strip lights.

Half height andfull height illuminationavailable.

NEWModern Unique

Design

electrical conduit electrical conduit

Top View /Baseplates

286

64


Fixed Insitu Lighting BollardsBollards shall be Leda Model (insert Model No.) or equivalent. The bollards will be manufactured from (insert material) with (insert slotted or square, if applicable) lens style with (insert 180° or 360°) illumination.Bollards to be fitted with (insert selected lamp wattage) lamp and internal louvres (strike out if not applicable – louvres not available for 80NB models).Bollards to be finished with (insert material, finish and/or colour).Installation. Bollards will be installed at (insert distance) centres.The bollards shall be cast into reinforced concrete individual or strip footings, ensuring that the bollard is inserted to a minimum depth of 300mm in accordance with Leda’s installation specifications.

Type / Name

Model No.

Material

Slotted / Square

Lens Type

Louvres Yes No

Bollard Centres

Colour / Finish

Type / Name

Model No.

Material

Slotted / Square

Lens Type

Louvres Yes No

Bollard Centres

Colour / Finish

Spec i f i c a t i on C l auses

Baseplate Lighting BollardsBollards shall be Leda Model (insert Model No.) or equivalent with base cover plate (strike out if not applicable). The bollards will be manufactured from (insert material) with (insert slotted or square, if applicable) lens style with (insert 180° or 360°) illumination.Bollards to be fitted with (insert selected lamp wattage) lamp and internal louvres (strike out if not applicable – louvres not available for 80NB models).Bollards to be finished with (insert material, finish and/or colour).Installation. Bollards to be installed at a maximum of (insert distance) centres by fixing to a reinforced concrete slab or footing using 12mm x 100mm masonry or chemical anchors.

> Visit www.ledasecurity.com.aufor further details or downloads on specification clauses.

✆ 1 3 0 0 7 8 0 4 5 0

65

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > Power D i s t r i bu t ion

Power Distribution

• Suitable for power and / or water distribution

• Provides safe OH&S power outlets

• Designed for use in remote areas

• Lockable and secure

• Ideal for sporting fields, parks and common areas

Leda power bollards are designed for use with Clipsal 56 Series switch gear. Electrical installation must be carried out by a licensed electrical contractor to comply with SAA wiring rules (AS3000) and any additional requirements of statutory authorities.

200NB

300NB

400 Square

600 Round

✆ 1 3 0 0 7 8 0 4 5 0

Titan 300NB

Titan 200NBMaterial Steel – 200NB (219.1) x 4.8mm pipe Stainless Steel – 200NB (219.0) x 3.76mm pipeFinish Steel - Electrostatically powder coated or hot dipped galvanised Stainless steel – Linished or electro-polished

Material Steel – 300NB (323.9) x 6.4mm pipe Stainless Steel – 200NB (323.4) x 4.57mm pipeFinish Steel - Electrostatically powder coated or hot dipped galvanised Stainless steel – Linished or electro-polished

Supplied with galvanised pre-punched mounting plates to take 2, 4, 6 & 8 standard mounting enclosures.

Supplied with galvanised pre-punched mounting plates to take 2, 4, 6 & 8 standard mounting enclosures.

Double DoorSteel

TPB120BStainless Steel

STPB120B

1115

1115

Single doorSteel


STPB103B

electrical service

TypicalBaseplate

444

340

TypicalBaseplate

Single doorSteel


STPB30B

electrical servicewater service

Optional use as secure power & water service provideror water only

Wateraccess

Poweraccess

Poweraccess

Wateraccess

Double DoorSteel


STPB230B

TypicalSide View

TypicalSide View

275

385

24

540

275

385

24

540

66


✆ 1 3 0 0 7 8 0 4 5 0

Titan 400Material 3mm mild steel sheet / 3mm Grade 304 stainless steel sheet

Finish Galvanised / electro polished

1115 820

400

200

1092

SteelTPB40B

Stainless SteelTPB40B

400

Side ViewFront View

Titan 600Material 600NB (610) x 6.35mm steel pipe/ Grade 304 stainless steel pipe

Finish Galvanised / electro polished

1115

SteelTPB60B

Stainless SteelSTPB60B

30 gap for cables

Drainageholes

30 gap for hose

Wateraccess

Poweraccess

3°

550Opening

Side ViewFront View Rear View610

350Opening

820Electrical

200150

520Water

3 point security T-lock

67

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Some people shop at night.

Protect your property.Stop ram raids and burglaries.

68


✆ 1 3 0 0 7 8 0 4 5 00 7 8 0 4 5 0

69

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > Secu r i t y

Sentinel

SentinelLightweight

Super XP

ImpactResistant

150

ImpactResistant

300

Polyethylene,Stainless Steel &Pre-cast Sleeves

BarrierRange

HeavyDuty

Security

• Impact tested and rated

• High impact and anti-cutting models

• Sentinel – Australia’s most popularsecurity bollard (over 120,000 installed)

• Provide protection from ram raids to vehicular-borne terrorist attacks

• For use in –High risk applicationsShopping centresATM protectionCommercial and industrial projectsPublic areas and squares

• Available in –Locking & RemovableFixed InsituSleeves

The security section in this handbook covers Leda’s commercial bollards only. For security reasons, high security and anti-terrorist certified bollards are not detailed. For further information on PAS 68 and SPEC endorsed bollards and applications, please contact your nearest Leda sales office where your enquiry will be dealt with by an appropriately qualified consultant.

✆ 1 3 0 0 7 8 0 4 5 0

Lifting handlefor easy removal

Patentedlocking system

Heavy duty galvanised steelelectrostatically powder coated,in an optional range of colours

Easy, economical installationby concrete core drilling

Neoprenerubberprotects pavement surface

Locks in underground

Over120,000

SuccessfulInstallations

70

Ram raiding has become the most common method of illegal intrusion into retail and industrial properties. Leda security bollards provide the first line of defence in preventing ram raids and illegal enforced entry. In many instances, the visual deterrent is all that is needed – however, when relied upon, Leda bollards are designed to physically stop vehicles from entering or leaving an area or building.

Bo l l a rd s w i th p roven pe r fo rmance Leda was the forerunner in developing security bollards in Australia, with over 120,000 successful installations as testament to the level of security they provide.

Leda is the largest and leading security bollard manufacturer in Australia with an ongoing commitment to researching and developing bollards with improved performance and impact resistance.

The range includes locking and removable, and permanently fixed models that are impact rated, allowing selection of the appropriate bollard for the perceived threat and to meet OH&S concerns.

A range that has been designed and engineered based on intensive market research in conjunction with:

• Law enforcement agencies

• Security companies

• Insurance and risk management experts

The bene f i t of t e chn i ca l ‘ know-how ’Leda has the technical ‘know-how’ and offers free site audits using trained and experienced staff to advise and recommend the best methods and products to protect your assets.

Installations are carried out by Leda’s professional team and where required, project managed by Leda engineers. Leda offers an unconditional guarantee of replacement should the bollards’ security ever be breached. Service technicians are available to supply same-day service and replacement bollards in the event of accidental damage.

Sentinel 80NB locking & removable bollard

illustrated

P roduc t Range > Secu r i t y > F ea tu re s

✆ 1 3 0 0 7 8 0 4 5 0

Rollerdoorcables

Core drill installation

Max 1.4m

Suggestion: Minimise the ‘run-up’ area by:• perimeter bollards• speed retardents – speed bumps – landscaping – planter boxes

Bollard securedinside building

Visual deterrentand door security

Prevents damage to building

1 and 3 combinedrecommended forhigh securityapplications

Bollards lockin storage sleeves when not in use


Locking &Removable

(max 1.4m centres)

Core drillinstallation

Cover PlateSits flush in hole

when bollard is removed

SleeveWhen constructing new concrete footing


Neoprene ringprotects pavement

Core drillinstallation

Fixed(max 1.4m)

Locking &Removable

at entry

Locks in underground

Fixed(max 0.6m centres)

1.2mwheelchair

access

71

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > Secu r i t y > Comme rc ia l & Indu s t r ia l

P ro tec t• Glass frontages, doors to shops, shopping

centres and retail outlets

• ATMs from ram raids

• Buildings and structures from vehicular damage

Secu re• Gateways and vehicular entrances

• Roller doors in factories and warehouses

• Property perimeters – by providing total security with visual deterrents

P reven t• Disruption caused by break-ins

• Vehicle theft

• Obstruction to driveway access andemergency exits

• Unauthorised parking

Def ine• Access ways

• Pathways and cycleways

• Areas – to ensure traffic (vehicular or pedestrian) follows the path you want

Leda can tailor products to meet customers’ requirements.Photograph above shows Leda’s XP90 Bollard powder coated to Caltex Australia’s colour specification.XP90RCAL L&RXP90FCAL Fixed

✆ 1 3 0 0 7 8 0 4 5 0

Sentinel

Minimum400 x 400 x 500.Security Bollards require strip footings, refer Installation section.


Material 80NB (88.9) x 3.0mm medium duty galvanised pipe 80NB (88.9) x 5.9mm extra heavy duty galvanised pipe 150NB (165.1) x 5.4mm hd galvanised or 11.0mm structural pipeFinish Electrostatically powder coated in black or industrial yellow. Optional range of colours available on request.

Material 80NB (88.9) x 5.9mm extra heavy duty galvanised pipe 65NB (76.1) x 4.5mm heavy duty galvanised pipe insertFinish Electrostatically powder coated in black or industrial yellow. Optional range of colours available on request.

Locking & Removable

XP90R(19.5kg)

FixedInsituXP90F

Super XP

Minimum400 x 400 x 500.Security Bollards require strip footings, refer Installation section.

FixedInsituSP90F 1 1

2

Lifting Trolley availablefor easy removal of

heavier L&R bollards.Refer Accessories section.

Double lock option.Ideal where two partiesrequire access withoutcompromising security.

Refer Accessories section.

1

2

Locking & RemovableSP150R A 5.4SP150R C 11.0

FixedInsitu

SP150F A 5.4SP150F C 11.0

SP90R(13.5kg)

SP90RWWLightweight (12kg)

150NB80NB

1

1

Locking & Removable

XP90RGG 1 1

FixedInsitu

XP90FGG 1

Locking & Removable

10.4mm wallprovides maximumimpact resistance

Handle onL&R model

1200

900

Cut-awayshowing inner pipe

Over120,000

SuccessfulInstallations

72


✆ 1 3 0 0 7 8 0 4 5 0

Typical section through bollardshowing the cruciform reinforcement

and barrier mix infill.

73

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > Secu r i t y > Ba r r ie r - i n f i l l Bo l l a rd s

Ba r r i e r M i x In f i l lImpact resistance is normally a key issue with the majority of bollard installations, however in security applications, cutting resistance may be equally important. Leda’s security bollards were developed in consultation with ATM manufacturers, major banks, shopping centre owners and insurance companies.

They have proved to be the largest physical deterrent in minimising ram raid attacks on ATMs and are often used in other high security applications due to their combination of high impact and anti-cutting characteristics.

Cutting ResistanceDuring our research and testing program (spanning over 2 years) various types of cutting equipment was used to determine the cutting resistance of different bollard infills.

The impressive results has led to our high security barrier-infill bollards being approved and certified under PAS 68*.

The bollards incorporate internal (cruciform) reinforcement and barrier mix infill that significantly increases the bollard’s impact resistance while also providing maximum cutting impediment.

While the results of these impact tests are confidential, Leda is the only Australian bollard manufacturer with the knowledge to assist in specifying the appropriate high security bollards for your application as well as providing the engineering details for concrete footings needed to absorb the impact energy.

* British Standard PAS 68 Impact test specifications for vehicle security barriers

Our successful results and innovative technology also came to the notice of Australian and British security organisations who conducted further vehicle impact testing at the Transport Research Laboratories outside London, with the bollards being impact-tested at various speeds using 2.5t, 3.5t and 7.5t commercial vehicles > Refer Designing for Security Applications p8.

Rigorous cutting testsbeing carried out byLeda engineers.

✆ 1 3 0 0 7 8 0 4 5 0

74

P roduc t Range > Secu r i t y > Shopp ing Cent re P ro t e c t ion

Leda’s Sentinel Shopping Centre Bollards have been developed to impede and prevent vehicular ram raids as well as attacks on ATMs within retail outlets and shopping centres, while still allowing easy pedestrian access.

Our security bollards are also designed to protect property, avoiding the costly building repairs and disruption that can follow a ram raid attempt.

Shopping Centre Bollards• Aesthetically attractive• High impact resistance from vehicular attack• Maximum cutting resistance from blade and oxyacetylene• Available in Locking & Removable and Fixed models

✆ 1 3 0 0 7 8 0 4 5 0

75

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

Prior to the design and testing of these new ATM security devices, Leda consulted with ATM manufacturers and service providers, major banks, retail outlets and insurance companies, to determine

the products and devices needed to deter and slow down ATM attacks.

The products developed as a result of our research & development program are not directed at one specific application. Security devices should

never be used in isolation. Instead they add to a range of options that can be used to collectively provide greater ATM security.

The objective for all ATM owners and the property managers is to make it more difficult to attack so that:

• Thieves look elsewhere for an easier target.

• Thieves face ‘layered’ security away from the target.

• Time required to steal the ATM is extended, increasing detection with collateral damage eliminated or reduced.

ATMs fa l l i n to 2 ma jo r c a tego r i e s :• Through-the-wall ATMs (larger ATMs common

with banks and credit unions).

• Lobby ATMs (fastest growing segment of the ATM industry – with applications from hotels and malls, to service stations).

ATM Anchors• Herc alloy chain• 16mm anchors• Designed to provide

resistance against forced attacks

ATM Barriers• Visual deterrent• Disrupts lassoing

or lifting• Moderate impact

resistance

ATM Bollards• Visual deterrent• High impact resistance• Highly resistant against

cutting tools, oxyacetylene torch and force attacks, or a combination of all three

P roduc t Range > Secu r i t y > ATM P ro t e c t ion

✆ 1 3 0 0 7 8 0 4 5 0

Barrier Range

Lifting Trolley available for easy removal of heavier L&R bollards.Refer Accessoriessection.

Typical section showing cruciform reinforcementand barrier mix infill.


Locking & RemovableSteel

IBR150RSCStainless Steel

SSP150RSC

Fixed InsituSteel

IBR150FSCStainless Steel

SSP150FSC

Locking & RemovableStainless Steel

SSP125RSC

125NB 150NBFixed Insitu

Stainless SteelSSP125FSC1 1 2

2

2

2

Material 125NB (141.3) x 3.4 stainless steel pipe 150NB (165.1) x 5.4 mild steel pipe 150NB (168.3) x 3.4mm stainless steel pipeFinish Steel. Electrostatically powder coated in black or industrial yellow. Stainless steel. Linished or electro-polished

Barrier mix infill is also availableon all Leda Slimline and Regalstainless steel bollards.

ATM ProtectionMaterial Heavy duty galvanised pipe / galvanised RHS


Fixed insitu

Optionalbaseplate

BarrierATMSB975F

125NB (139.7) x 5.4mm

Optionalfixed insitu

16mm anchors

BarrierATM65B

65NB (76.1) x 4.5mmATM80B

80NB (88.9) x 5.9mm

16mm anchorsBarrier

ATM100B100 x 100x 6.0mm RHS

XP90 BollardsATM804R

80NB (88.9) x 5.9mm65NB (76.1) x 4.5mminsert

XP90RL&R Bollards

XP90FFixed Bollards

76


✆ 1 3 0 0 7 8 0 4 5 0

Impact Resistant

HD Industrial

Material 150NB (168.3) x 4.8 / 7.11 / 11.0mm extra heavy duty pipe 200NB (219.1) x 4.8 / 8.2 / 12.5mm extra heavy duty pipe 300NB (323.9) x 6.35 / 9.5 / 12.7mm extra heavy duty pipeFinish Electrostatically powder coated in black or industrial yellow. Optional plastic (range of colours) or stainless steel sleeve on 150NB

Material 150NB (168.3) x 7.11 x 11.0mm galvanised steel pipe 200NB (219.1) x 8.2 / 12.7mm galvanised steel pipe 250 x 250 x 9.5mm SHS, concrete filledFinish Electrostatically powder coated in black or industrial yellow.


Base plate


Showncut awayfor clarity

Typical Section

1

2

2

150NBIRB150F A 4.8IRB150F B 7.11IRB150F C 11.0



2

3

3

3

3

3

331

2

2

150NB RemovableHIG150R B 7.11HIG150R C 11.0

200NB RemovableHIG200R B 8.2HIG200R C 12.7


Designed for use in heavy industrialapplications.Fixed eyeboltallows quick and easybollard removal.

350Ø x 6mmprotection ringfixed withmasonry anchorsminimisesconcrete slab wear

Lifting ring

3

250 SHSFixed Insitu

IBS250FB

Shown cut awayfor clarity

300 x 450 x 25mmplates welded to SHS all round

250 SHSFixed Baseplate

IBS250BB

930

1400

900

300

Baseplate /Section

450

300

250

Note. These bollards are designed for concrete infilling on site, caps or reinforcement are not included

77

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Pre-cast SleevesMaterial 30MPa concrete / Polystyrene 150NB (168.3) x 5.0 / 11.0mm hot dipped galvanised linepipeFinish Off-white, lightly sand blasted

Round SleevesMaterial Polyethylene / Ø172mm stainless steel tube.

Finish Polyethylene / Linished or electro-polished

Cut awayfor clarity

Cut awayfor clarity

900 900 or 1200

Grubscrew fix at base

Grubscrew fix at base

Fits neatly over150NB pipe

Fits neatly over150NB steel bollardsIRB150F AIRB150F BIRB150F C

Fits neatly over150NB steel bollardsIRB150F AIRB150F BIRB150F C

AmbassadorPolyethylene Sleeve

PAS150F

RusselPre-cast Concrete

Bollard SleevePR44S

RusselPolystyrene

Bollard SleevePPR44S

(lightweight, looks like concrete)

Stainless SteelSleeve

SSS150F A 900 highSSS150F B 1200 high

For use in medium to high security applications providing a cost-effective alternative to using thick-wall stainless steel. Also ideal for use in high accident prone applications, like supermarkets, where it may be necessary to replace damaged bollards.

Replaceable polyethylene sleevefits over steel bollards – minimisesdamage from shopping trolleys.

Section

TypicalTop View

Low CostSolution

Low CostSolution

78


✆ 1 3 0 0 7 8 0 4 5 0

79

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > Ret ra c t ab le

AdvantageManual Slimline

Manual

AdvantageSemi-automatic

SlimlineSemi-automatic

AdvantageAutomatic

SlimlineAutomatic

Retractable

• Vehicular access control through tomedium and high security applications

• Manual and automatic models

• Fast lower-raise operation

• Visual deterrent to ramming

• Impact tested and rated models


✆ 1 3 0 0 7 8 0 4 5 0

80

P roduc t Range > Ret ra c t ab le > F ea tu re s & App l i c a t ions

For over a decade Leda has been recognised as Australia’s market leader in retractable bollards, with a comprehensive range of products catering for vehicular access control and security applications.

Leda Retractable Bollards hold distinct advantages over boom gates and other forms of vehicular access control as they provide much higher impact ratings and are pedestrian friendly.

There are two application-based product lines, each offering a range of diameters in both mild steel (galvanised or electrostatically powder coated) and stainless steel models.

S l im l ine Range

• Medium to high security applications

• Impact tested and rated

• Designed to physically stop vehicles

• Higher visual deterrent to ramming

• Taller, stronger and quicker operation

• Continuity of design with fixed and lighting bollards from the Leda range.Refer Slimline and Lighting sections

• Australian designed and manufactured.

High Security Applications• Government & public buildings

• Hotels & high-profile buildings

• Military installations

• Government utilities and key infrastructure

• Embassies & consulates

High Duty Cycle• Busways

• Shopping centres

• Security checkpoints

Advan tage Range

• Vehicular access control applications

• Economical solution

Access Control Applications• City squares &

pedestrian malls

• Dedicated pedestrian areas & parks

• Car parks

• Business parks

• University campuses

✆ 1 3 0 0 7 8 0 4 5 0

All other vehicles access

Recommended maximum width of 4.0mfor access points, allowing large vehicle access.

RetractableBollards

Fixed Perimeter Bollards

(Traffic Light option)

Fixed orLocking & Removable Bollards (for access by larger vehicles)

Cars only access

Recommended maximum width of 3.0m

RetractableBollards

Fixed Perimeter Bollards

(Traffic Light option)

81

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > Ret ra c t ab le > F ea tu re s & App l i c a t ions

Ope ra t i on Leda offers clients the flexibility of these operation options:

Manual• Economical access control solution for

low-level security applications

• Operates with a lifting handle

Semi Automatic – Gas Strut• Gas strut enables the bollard to rise under

its own stored power, making it ideal where there are weight or OH&S lifting concerns

• Locks using Leda’s unique patented locking system

Automatic – Pneumatic• Pneumatic operation

• Various control and operating options

• Quick raising and lowering speeds

• Reaches full 900mm extension in under 3 seconds

• Designed for continual operation(100% duty cycle)

How many bo l l a rd s? Leda recommend that active vehicle lanes have a minimum of 2 bollards per lane to assist larger vehicles transiting the area and reduce the possibility of accidental damage. For busy access points, fixed bollards can be fitted with optional traffic lights.

✆ 1 3 0 0 7 8 0 4 5 0

ControlCabinet

RetractableBollards

ControlOverride

Wall MountedCard Reader

Leda’s unique control systemis designed to allow limited operation

during power outages.

SafetyLoop

AccessControl

1.0mMax

Air Compressor& Reservoir

Electronic or PneumaticController

MainsPower

ControlCabinet

RetractableBollards

FixedBollards

ControlOverride

Card ReaderBollards

SafetyLoopAccess

Control

1.0mMax

Air Compressor& Reservoir

Electronic or PneumaticController

MainsPower

82

Power Requ i rement sPneumatic models: 240V AC, 10A, or 3-phase 415V.To protect against power outages, high security installations may require connection to an uninterrupted power supply (UPS).

Cont ro l l e rProgrammable Control Board (PCB) or Programmable Logical Controller (PLC), located in the control cabinet, is essential for all functions and allows the flexibility to customise bollard operational requirements to suit each installation. Operation functions can be interfaced with the building management or access control system.

Control Cabinets can be located internally in a secure room or externally in a secure weather-resistant enclosure.

In s t a l l a t i onRetractable Bollards normally require a 1.6m deep excavation. Security applications may require that the bollards be installed in a continuous concrete strip footing. Leda engineers can assist in the structural design of appropriate footings. For further general information on installation refer to the Installation section.

P roduc t Range > Ret ra c t ab le > Ope ra t ion

Add i t i ona l Op t ions• Control cabinets – wall / floor mounted

• PE beams – automatic detection

• Traffic lights – for busy access points

• Safety loops – prevent accidental extension. (Override function is recommended for security applications.)

• Access control options- push button (guardhouse)- swipe card (car parks)- remote control (garages)

• Locks – pneumatic bollards

• Sump pumps – for areas with poor drainage. Standard 24V marine pump

Main tenancePreventative maintenance programs are

recommended for all Leda Retractable Bollards. A suitable program can be tailored to suit

the site.

Typ i ca lCon f i gu ra t i ons

✆ 1 3 0 0 7 8 0 4 5 0

1600mmconcrete perspecification

1600mm minrecommended

excavation

Ø 800 minimumrecommended excavation

1445

Ø50mm minimumconduit

Reinforcement cage(optional)

Drainage hose(to stormwater or sump)

InstallationOption AConcrete

InstallationOption B

Concrete & Rock

500mmconcrete perspecification

1000mmhighly compacted

blue metal /road base

Paving / bitumen finish

83

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

Typ i ca lIn s t a l l a t i on

P roduc t Range > Ret ra c t ab le > Ins t a l l a t ion

Installation of retractable bollards can involve individual or multiple units, and the application may range from access control or high security.

Acces s con t ro l app l i c a t i ons• For individual installations or where security is

not an issue, the easiest method of installing the bollards is through simple excavation using a mechanised posthole auger.

• Bollards can be inserted into the hole, extended and ‘plumbed’ for alignment.

• Steel cage reinforcement is added and the hole back-filled with 30MPa concrete.

Full installation detailsare available from Leda.

Secu r i t y app l i c a t i ons• For security applications, the footings need to

be specified to meet the impact resistance and performance required by the bollards.

• Leda’s engineering division can assist through all phases to ensure that security specifications are complied with.

• Leda’s electrical engineers will also prepare specifications regarding the control, UPS back-up and surge protection for the installation.

Techn i ca l a s s i s t anceLeda boasts unrivalled service, advice and technical support and can assist in the installation process by:

1. Providing installation manuals and instructions to allow installation by third parties.

2. Project manage the civil works and electrical installation to system commissioning.

3. Carry out complete installation from design to commissioning.

Whatever the option, Leda has the expertise.

✆ 1 3 0 0 7 8 0 4 5 0

Material C250LO steel pipe, steel lid / surround Grade 304 stainless steel pipe, cast stainless steel lid / surroundFinish Galvanised or electrostatically powder coated Linished or electro-polished

Features • 900mm extension

• Economical manual operation

• Integral lifting handle

• Patented locking system (Bollard locks in raised position)

• Retracts flush with pavement

• Chequer plate (non-slip) lid and surround

80NB88.9mm OD

wall thickness varies

Mild Steel (Galvanised)MRB90 A (4.00mm wall)MRB90 B (5.90mm wall)

Stainless SteelSMRB90 A (3.05mm wall)SMRB90 B (5.49mm wall)SMRB90 C (7.62mm wall)

150NB168.3mm OD


Mild Steel (Galvanised)MRB150A (4.88mm wall)MRB150B (7.11mm wall)

Stainless SteelSMRB150 A (3.40mm wall)SMRB150 B (7.11mm wall)

11

1

1

11

1

900

1300 1450

Slimline

Manual

11

30MPa concretearound outer casing

Locking key

Lifting handle

Drainage pipe

Optional reflective tape

Line of Pavement

350

Top View

150

Top View

Leda’s bollard lifters are recommended where bollard weight exceeds

OH&S lifting weight regulations.Refer Accessories section.

Security

84


✆ 1 3 0 0 7 8 0 4 5 0


Locking key

Raise key

900

1450

Line of Pavement

Typical Top View

367

467

Material ERW steel linepipe, steel lid / surround Grade 304 stainless steel pipe, cast stainless steel lid / surroundFinish Galvanised or electrostatically powder coated Linished or electro-polished


• Gas strut enables bollard to rise under its own stored power

• Patented locking system (Bollard locks in raised position)



100NB114.3mm OD


Mild Steel (Galvanised)MRB100GS A (4.50mm wall)MRB100GS B (6.02mm wall)MRB100GS C (8.56mm wall)

Stainless SteelSMRB100GS A (3.05mm wall)SMRB100GS B (5.49mm wall)SMRB100GS C (7.62mm wall)

200NB219.0mm OD


Mild Steel (Galvanised)MRB200GS A (4.80mm wall)MRB200GS B (8.00mm wall)

Stainless SteelSMRB200GS A (3.76mm wall)SMRB200GS B (8.18mm wall)

1

1

1 2

2111

150NB168.3mm OD


Mild Steel (Galvanised)MRB150GS A (4.80mm wall)MRB150GS B (7.11mm wall)

MRB150GS C (10.97mm wall)

Stainless SteelSMRB150GS A (3.40mm wall)SMRB150GS B (7.11mm wall)SMRB150GS C (10.49mm wall)

11

2

112

Slimline

Semi Automatic

Drainage pipe


3

3

Security

85

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

200NB219.0mm OD


Mild Steel (Galvanised)ARB200 A (4.80mm wall)ARB200 B (8.00mm wall)ARB200 C (12.50mm wall)

Stainless SteelSARB200 A (3.76mm wall)SARB200 B (8.18mm wall)SARB200 C (12.70mm wall)

22

3

223

Slimline

Automatic

150NB168.3mm OD


Mild Steel (Galvanised)ARB150 A (4.80mm wall)ARB150 B (7.11mm wall)

ARB150 C (10.97mm wall)

Stainless SteelSARB150 A (3.40mm wall)SARB150 B (7.11mm wall)SARB150 C (10.49mm wall)

11

2

112

12

12

Material ERW steel linepipe, steel lid / surround Grade 304 stainless steel pipe, cast stainless steel lid / surroundFinish Galvanised or electrostatically powder coated Linished or electro-polished


• Pneumatic operation

• Various control options

• High duty cycle (100%)

• Full extension in under 3 seconds



900

1450

Line of Pavement

Drainage pipe

Optionalreflective tape


OptionalSuspended Slab

Installation

ARB150 S BARB150 S C

SARB150 S BSARB150 S C

Air Compressors (1 bollard - 6 bollards)Air compressors are determined once air usage can be calculated. This is determined by:1. The number of bollards2. Airline distance3. Frequency of operation.In certain applications, where the compressor cannot be located close enough to the bollards, it may be necessary to install an air reservoir. 3-phase silent compressors are also available as an option.

Typical Top View

367

467

Control CabinetARBCCFor single and multiple bollard operation.PCB Programmable Control Board for basic operationsPLC Programmable Logic Controller for more sophisticated operations

112

SSL150FT A (3.40mm wall) SSL150FT B (7.11mm wall) SSL150FT C (10.97mm wall)

Security

OptionalTraffic Light BollardsSlimline 150NB Fixed Insitu900mm high, security rated

86


✆ 1 3 0 0 7 8 0 4 5 0

Material Mild steel pipe, mild steel lid / surround Grade 304 stainless steel pipe, cast stainless steel lid / surroundFinish Galvanised or electrostatically powder coated Linished or electro-polished


• Economical manual operation

• Easy to use

• Locks in raised position


80NB88.9mm OD

3.5mm wall thickness

Mild SteelTMRB80750 (750 height)TMRB80900 (900 height)

Stainless SteelTSMRB80900 (900 height)

125NB133.0mm OD


Mild SteelTMRB125900 (900 height)

Stainless SteelTSMRB125900 (900 height)

Advantage

Manual

900 or 750 (mild steel)

Line of Pavement

1080 930


Drainage pipe


150

Top View

350

Top View

TheEconomical

Option

87

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Line of Pavement

Material Mild steel pipe, mild steel lid / surround Grade 304 stainless steel pipe, cast stainless steel lid / surroundFinish Galvanised or electrostatically powder coated Linished or electro-polishedFeatures • 900mm and 750mm extension

• Gast strut enables bollard to rise easily under its own stored power

• Locks in both raised and lowered position


• OH&S compliant

100NB114.0mm OD


Mild SteelTMRBGS110900

Stainless SteelTSMRBGS110900

150NB168.0mm OD


Mild SteelTMRBGS150750

Stainless SteelTSMRBGS150750

900

1156

750

1006

Advantage

Semi Automatic

376

306


TypicalTop View


Locking keyMRBGSK

TheEconomical

Option

88


✆ 1 3 0 0 7 8 0 4 5 0

Material Mild steel pipe, mild steel lid / surround Grade 304 stainless steel pipe, cast stainless steel lid / surroundFinish Galvanised or electrostatically powder coated Linished or electro-polished

Features • 900mm and 750mm extensions

• Pneumatic or hydraulic operation

• Various control options

• Full extension in under 3 seconds


200NB219.0mm OD

wall thickness variesMild Steel(7.0mm wall)TARB200750TARB200900

Stainless Steel(6.0mm wall)

TSARB200750

Advantage

Automatic

150NB168.0mm OD

wall thickness variesMild Steel(6.0mm wall)TARB150750TARB150900

Stainless Steel(5.0mm wall)

TSARB150750

112

SSL150FT A (3.40mm wall) SSL150FT B (7.11mm wall) SSL150FT C (10.97mm wall)

OptionalTraffic Light BollardsSlimline 150NB Fixed Insitu900mm high, security rated

900

1137

Line of Pavement

750

987

427

200NBTop View

357

Air Compressors (1 bollard - 10 bollards)Air compressors are determined once air usage can be calculated. This is determined by:1. The number of bollards2. Airline distance3. Frequency of operation.In certain applications, where the compressor cannot be located close enough to the bollards, it may be necessary to install an air reservoir. 3-phase silent compressors are also available as an option.

376

306

150NBTop View

TheEconomical

Option

Up to 10 bollardscan be operated by one PLC controller

Control CabinetTPNCC10(For up to 10 Advantage Bollards – PLC control)

89

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Lane MarkerMaterial Galvanised steel housing White plastic post with reflectorsFinish Galvanised / plastic

Features

• Lane control and dileneation –• Automatic pneumatic operation

• Shallow installation

• Flexible and durable upright

• Retracts flush with roadway

Line of Roadway

End View

136

Top View

745nominal

Side ViewFold DownETB75A

230

1056

90


Re t ra c t ab le Bo l l a rd s

The R igh t Adv i ceWhen considering installing retractable

bollards, it is advisable to contact your Leda sales office to ensure the selection of the

appropriate product. Experienced Leda staff can assist in helping you through the multiple

operation and technical issues.

Leda design staff will also prepare the necessary working drawing and the recommended operation manuals.

Se r v i ce and Ma in tenanceRetractable bollards and compressors /

power packs need to be cleaned and serviced at recommended intervals (depending on

usage) to ensure trouble-free operation. It is extremely important that clean, dry air is

maintained. Leda’s technical staff will assist in developing the correct maintenance program

for your equipment.

STOP PRESSAs the Handbook goes to press,

Leda is well advanced in the development of a new range of

water-powered retractable bollards.

Basic models will operate from mains water pressure

(10-15 seconds operating speeds) however quicker operating speeds

will be achievable with devoted water pumps.

Please check Leda’s website for updated information:www.ledasecurity.com.au

✆ 1 3 0 0 7 8 0 4 5 0

91

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > Indus t r i a l

Round80NB-300NB

Square &Rectangular

EconomicalBuilders Bollards

SmokersBollards

Industrial

• Locking & Removable, Fixed and Baseplate models

• Strong and sturdy

• Economical – includes the ‘no-frills’ range of Builders Bollards, a low-cost alternative to the higher rating Securapost

• Visual deterrent

Designed to protect plant, equipment and buildings the Leda Industrial range includes heavy duty bollards as well as the cost-effective Builders Bollards range. The Industrial range also includes Smokers Bollards and CCTV mounts.

✆ 1 3 0 0 7 8 0 4 5 0

RoundFixed Insitu

Fixed Baseplate

Material Heavy duty galvanised pipe 80NB (88.9) x 3.2mm 100NB (114.3) x 5.4mm 125NB (139.7) x 5.4mm 150NB (165.1) x 5.4 / 11.0mm 200NB (219.1) x 4.8mm 300NB (323.9) x 6.35mmFinish Galvanised or electrostatically powder coated in black or industrial yellow Optional range of colours available on request

150NBIBR150F A 5.4mmIBR150F B 11.0mm

200NBIBR200F A

300NBIBR300F A

100NBIBR100F A 1

80NBIBR80F A

100NBIBR100B

80NBIBR80B

125NBIBR125B

150NBIBR150B

200NBIBR200B

300NBIBR300B

1125NB

IBR125F A 1 1

Security Bollards require strip footings, refer Installation section.

22 2

RC footingminimum450 x 450x 500

RC footingminimum400 x 400x 500

RC footingminimum500 x 500 x 600



Baseplate80/100 Models

Baseplate200 Model

440

Baseplate125/150 Models

Baseplate300 Model

92


✆ 1 3 0 0 7 8 0 4 5 0

SquareMaterial Heavy duty galvanised RHS (Rectangular Hollow Section) 100 x 100 x 4mm 150 x 150 x 5mm 100 x 200 x 4mmFinish Galvanised or electrostatically powder coated in black or industrial yellow Optional range of colours available on request

100 x 200Fixed Insitu

NB21F A

100 X 100Fixed Insitu

IBS100F A 1

100 X 100Locking & Removable

IBS100R A

100 x 100Fixed Baseplate

IBS100B


IBS150B


NB21B

1

150 X 150Fixed Insitu

IBS150F A 1 1


Security Bollards require strip footings,

refer Installation section.

Minimum500 x 500 x 600

Minimum500 x 500 x 600

200

Baseplate

200

270

270

Baseplate

270

270

Baseplate

93

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Builders BollardsMaterial Medium duty mild steel pipe 65NB - 300NBFinish Unpainted. Hot dipped galvanised or electrostatically powder coated is optional

Locking &Removable

BB80LR

Caps(Optional)

BB65CBB80CBB100CBB125CBB150CBB200CBB300C

Padlock& Sleeve

BB80PBB150P


FixedInsituBB65FBB80FBB100FBB125FBB150FBB200FBB300F

Builders Bollards are a no-frills, economical range

and can be ordered onlineand paid by credit card.

Fixed Baseplate

BB65BBB80BBB100BBB125BBB150BBB200BBB300B

RetractableBB80R

Baseplate

900

varies

TheEconomical

Option

Builders Bollards are supplied in a range of diameters for fixed insitu and baseplate models.Note: Wall thickness is subject to change,depending upon material availability.

80NB65NB 100NB 125NB 150NB 200NB300NB

94


✆ 1 3 0 0 7 8 0 4 5 0

Material Galvanised mild steel angle, with countersunk fixing holesFinish Hot dipped galvanised or electrostatically powder coated in a range of colours

Corner Guards

100 x 100 x 6mmCG1119

150 x 150 x 6mmCG1529

1000 1000

Material 65 x 65 x 3mm / 75 x 75 x 3mm RHSFinish Hot dipped galvanised or electrostatically powder coated in a range of colours

Receiving Post

880-1160Adjustable

Baseplate

Front View

Fixed BaseplateIBR75BG

180

200

200

M12 x 100galvanised bolts

Outer 75 RHS

Adjustheightto suit

Inner 65 RHS

Baseplate200 x 200 x 8mm

Suit Boom Gates

95

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Smokers BollardsMaterial Butt Bin. 90NB (101.6) x 2.11mm Grade 304 Stainless Steel Pipe Bollard. 150NB (168.3) x 3.40mm Grade 304 Stainless Steel Pipe Finish Linished or electro-plated

ButtBin

URB100ASWM

SmokersBollard

SSR150FAS

1100nominal

400

Key lockableremovable bin.500 butt capacity

1200 970

Baseplate

Key lockableremovable bin.500 butt capacity

286

Material Fabricated mild steelFinish Hot dipped galvanised or electrostatically powder coated in a range of colours

CCTV Mounts

The security industry has to mount camera in a variety of locations and Leda’s range of CCTV camera arms will meet most requirements. From suspension from a roof to getting the best angle around a corner, Leda has a safe option for securing your camera.

Base plates and camera plates can be configured to suit individual camera requirements. Hot dipped galvanised is the recommended finish although a variety of powder coated finishes is available.

CornerBracket

CCCB

StraightBracket

CCSB

AngleBracket

CCAB

HoopCCHO

BirdSpikesCCBS

Pole4m – 6mCCP4 – 6

96


✆ 1 3 0 0 7 8 0 4 5 0

97

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

P roduc t Range > Ca rd Reade rs

CRB Series

P Series

P SeriesDouble

Card Readers

• Single or dual heightto suit cars and trucks

• Compatible with virtually all access control systems

• Card reader, touch pad and CCTV options

• Custom heights can be accommodated

M Series

Turnstile

Regal

Turnstile

Conventional card readers are available in standard finish electrostatically powder coated yellow. Contemporary designs are finished electrostatically powder coated or Grade 304 stainless steel with a level 4 linished finish.

✆ 1 3 0 0 7 8 0 4 5 0

200

CRB Series

CRB Series

Material Support. 75 x 75 x 3mm RHS Reader Cover / Wall Plate 2mm plateFinish Mild steel. Electrostatically powder coated in industrial yellow Stainless steel. Linished or electro-plated

Material Upright. 75 x 75 x 3mm RHS Reader Cover 2mm plateFinish Mild steel. Electrostatically powder coated in industrial yellow Stainless steel. Linished or electro-plated

250

Custom heights can be manufacturedplease advise at time of ordering

1100

250 375

231

200

Fixed InsituMild Steel

CRB11FStainless Steel

SP1125PFFront View

Fixed BaseplateMild Steel

CRB11BStainless Steel

SP1125PBFront View Typical Side View

1100nominal

250 375

231

200

421

Wall MountedMild SteelCRB11WM

Stainless SteelSP11WM

Front View

200Baseplate

200


98


✆ 1 3 0 0 7 8 0 4 5 0

P Series Material Upright (1100 high) 75 x 75 x 3mm heavy duty galvanised RHS Upright (1500/2000 high) 100 x 100 x 3mm heavy duty galvanised RHS Reader Cover. 2mm galvanised plateFinish Electrostatically powder coated in industrial yellow

Material Upright. 100 x 100 x 3mm heavy duty galvanised RHS Reader Cover. 2mm galvanised plateFinish Electrostatically powder coated in industrial yellow

Fixed InsituPDH31F

Front View

Fixed BaseplatePDH31B

Front ViewTypical

Side View

1100

900

Fixed InsituP1131F (1100 high)P1531F (1500 high)P2131F (2000 high)

Front View

330

330

330

1100 (75 RHS)1500 (100 RHS)2000 (100 RHS)

P2131F(2000 high)

Single

Double

290Baseplate

290

290Baseplate

290

330375

231

Fixed BaseplateP1131B (1100 high)P1531B (1500 high)P2131B (2000 high)

Front ViewTypical Side View

For additional information and

detailed head drawings contact your localLeda sales office

or visit the websitewww.ledasecurity.com.au

For additional information and

detailed head drawings contact your localLeda sales office

or visit the websitewww.ledasecurity.com.au

Wall MountedPWM31PSide View

375

231

486

330

300 400

400

99

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

Material 2mm flat sheet / 40 x 40 x 4mm angle frameFinish Mild steel. Electrostatically powder coated in a range of colours Stainless steel. Linished or electro-polished

Material 2mm flat sheet / 40 x 40 x 4mm angle frameFinish Mild steel. Electrostatically powder coated in a range of colours Stainless steel. Linished or electro-polished

Single

Double

Mild Steel (Galvanised)CBR500

Stainless SteelSCBR500


Accommodatescard readers, voice intercomand CCTV cameras

Accommodatescard readers, voice intercomand CCTV cameras

Camera mountand access panel

500 200

20

1820

Mild Steel (Galvanised)CBRDH500

Stainless SteelSCBRDH500

500

350

3501120

420

1050

20

Rectangular

Rectangular

Camera mount and access panel

350

420

Side ViewFront View

Baseplate600

300

Baseplate600

300

200

Camera mountand access panel

100


✆ 1 3 0 0 7 8 0 4 5 0

Turnstile

Regal

Material Upright. Galvanised steel / stainless steel Cover. 2mm galvanised steel / stainless steel Baseplate. 10mm galvanised / stainless steelFinish Electrostatically powder coated / Linished or electro-polished

Material 150NB (168.3) x 3.40 Grade 304 stainless steel pipe


1650

1100

Side View Front View

Fixed BaseplateStainless Steel

SSP150PF

Cameramount and accesspanel

Size & positionof cutouts forvideo intercomand proximitycard readerto specification

350

350

CRBTSBaseplate

Mild SteelCRB216B

Stainless SteelSCRB216B

350

150

CRB216BBaseplate

150

15°

Mild Steel CRBTS

254 254

Front View

Side View

Front View

Side View

3mm plate250 x 250x 6mm SHS

25

286

Baseplate

254

20

360

175

101

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102


✆ 1 3 0 0 7 8 0 4 5 0

102

P roduc t Range > Opt ions & Ac ces so r i e s

Product Description Code

Storage Sleeves Round Single bollard storage Suit 80NB SS1for L&R bollards 125NB SS1125 150NB SS1150 Double bollard storage 80NB SS2 125NB SS2125 150NB SS2150 Square Single bollard storage 100 x 100 SS111 Double bollard storage 100 x 150 SS211R Single bollard storage 150 x 150 SS2215RHanging Racks 1, 2, 3 or 4 bollards Suit 1 bollard WH1for L&R bollards 2 bollards WH2 3 bollards WH3 4 bollards WH4

Cover Plates Round Mild steel, drop-in Suit 80NB CP80& Lifting Handle Mild steel, drop-in, h/duty 80NB XHC1001 Mild steel, drop-in 125NB CP125 150NB CP150 Stainless steel, hinged 80NB SSCP80 125NB SSCP125 150NB SSCP150 Cover plate lifting handle LT1001Hinged Cover Plates Round Stainless steel cover, gal steel sleeve Suit 80NB SHCP80 Heavy duty 80NB SHCP80H 125NB SHCP125 For ‘A’ wall m/s & alum bollards 150NB SHCP150A For ‘A’ wall m/s & alum bollards, h/duty 150NB SHCP150AH For ‘B’ & ‘C’ wall m/s & all s/s bollards 150NB SHCP150B For ‘B’ & ‘C’ wall m/s & all s/s bollards, h/duty 150NB SHCP150BH Square Stainless steel cover, gal steel sleeve 100 x 100 SHCP11 100 x 150 SHCP15 150 x 150 SHCP55Cast-in Sleeves Round Mild steel Suit 80NB SL80R 125NB SL125RB Mild steel, suit m/steel & aluminium 150NB SL150RA Mild steel, suit stainless steel 150NB SL150RB Square Stainless steel, suit stainless steel 100 x 100 SL11R 100 x 150 SL1015R 150 x 150 SL1515R

O Rings Neoprene rubber Suit 80NB OR80 (Protects concrete and prevents the 125NB OR125 ingress of dirt and leaves) 150NB OR150

Door Cables Cable door assembly (including cable) Suit 80NB WCD50 For use with locking & removable bollards on roller doors

✆ 1 3 0 0 7 8 0 4 5 0

MRBGSKMRBLHB MRBLHT

BL150A

LT150JLT300A

103

B o l l a r d s

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102



Locking Options Double Locking DKE (Available for most locking & removable bollards) Alternative Locking BILOCK (eg. BiLock® high security key system) Master Keying KCP2 (Available for all locking & removable bollards) Keying Alike KAP (Catering for up to locking & removable 50 bollards) Additional Keys KEP Reflective Tape 50mm Black / White / Yellow / Red / Red & White RTV50

Traffic Lights Slimline 150NB 3.40mm wall SSP150TA (For use with retractable bollards 7.11mm wall SSP150TB and other automated barriers) 10.97mm wall SSP150TC

Baseplate Skirt Stainless steel Suit 80NB SSCP80B (For use with baseplate bollards) 125NB SSCP125B 150NB SSCP150B

Bollard Lifters Manual double handle (2 man) Suit 150NB BL150A Mechanical, up to 300kg (with clamps) 150NB LT150J Mechanical, up to 300kg 300NB LT300A

Lifting Handles & Keys For manual retractable bollards Suit 80-150NB MRBLHT 80-150NB MRBLHB 150NB MRBGSK

Installation Jig For retractable bollards ARBJIG (RHS frame with in-built levelling for easy positioning and plumbing of bollards)

✆ 1 3 0 0 7 8 0 4 5 0

104



Chain Eyes Screw in CEPS Weld on CEPW

Wings Medium duty 20NB galvanised pipe Suit Range S45W For use with most bollards

Personalised Tops Epoxy infill names & logos LOGOSTP Bronze inserts LOGO

Polished Head Option Aluminium, Ambassador style Suit 150NB POLALUMA Aluminium, Parisian style 80NB POLALUMP Aluminium, Commodore style 80NB POLALUMC Available as an option, heads not sold separately.

Louvres For use with Lighting Bollards Suit 150NB LOUVRE

Chain Galvanised, per metre 6mm CH6 8mm CH8

D Shackles Galvanised Suit 8mm DSHACKLE

Export Crates Timber or steel, made to suit CRATE

Masonry Anchors Steel 8 x 80mm MA8 10 x 100mm MA10 12 x 100mm MA12 S/Steel 10 x 100mm SMA10 12 x 100mm SMA12Chemsets 12 x 190mm MA12CA 16 x 260mm MA16CA 20 x 260mm MA20CADome Nuts S/steel, set of 4 12mm SDN1

B o l l a r d s

✆ 1 3 0 0 7 8 0 4 5 0

P roduc t Range > In s t a l l a t i on Codes


SetupTravel cost per hour outside metro areas TRAVEL1Worksite establishment metro areas ISITE2DetectionDial a dig service IDIALADIGGround penetrating radar survey IXRAYCable detection survey ICABDETECTExploratory 10mm pilot hole to intended bollard depth IPILOTCore DrillingAs a general guide for tight core drilling, take bollard OD and add 2mm.Most bollards can be installed with OD core sizes of 92mm and 171mm.Core drill 78mm Suit fixed bollards 65NB ICD61Core drill 92mm Suit fixed bollards 80NB ICD81Core drill 104mm Suit fixed bollards 100NB ICD101Core drill 152mm Suit fixed bollards 125NB ICD141Core drill 167mm Suit fixed bollards 150NB in steel or aluminium ICD151ACore drill 171mm Suit fixed bollards 150NB in stainless ICD151BCore drill 254mm Suit fixed bollards 200NB ICD251Core drill 304mm Suit fixed bollards 300NB ICD301Epoxy fixed bollardsTwo part epoxy for small gaps such as Megapoxy 69 or Nitomortar AP (Parchem). Use in accordance with manufacturer’s specifications.Epoxy fix 80NB bollard into hole IE80Epoxy fix 150NB bollard into hole IE150Epoxy fix 200NB bollard into hole IE200Core Drill and Grout (removable bollard sleeves or fixed bollards)High strength non-shrink grout for larger gaps. Proprietary brands such as Durabed 702 (Lanko),Conbextra C (Parchem), SikaGrout-212HP. Use in accordance with manufacturer’s specifications.Core drill 104mm and grout in sleeve. For 80NB bollard sleeve SL80R IDG101Core drill 167mm and grout in 80NB bollard sleeve SHCP80 IDG151Core drill 254mm and grout in 150NB bollard sleeve SL150R and SHCP150 IDG251FootingsStand alone concrete footing 400 x 400 x 400mm deep (individual bollard) ICFStrip FootingsExcavation, reinforcement and concrete 400 x 400mm ISF1 600 x 600mm ISF2 750 x 750mm ISF3 900 x 900mm ISF4 900 x 1500mm ISF5Concrete InfillBasic concrete mix added to inside of bollard up to 150NB LBM150AHigh security anti cut mix added to inside of bollard up to 150NB LBM150EFinalisation / MiscellaneousInstal base plate bollard IBP1Instal storage sleeve INSTSSFitting of roller shutter cable WCD50 IWCD50Clean up / wet vacuum hire IWETVACExcavate rubbish (+tip fee) per cubic metre IEX

> For full installation options contact your nearest Leda sales office. 105

Slimline 15

Regal 19

Urban 23

Modern 27

Luxford 33

Traditional 37

Enviro 43

Pre-cast 47

Lighting 55

Power 65

Security 69

Retractable 79

Industrial 91

Card Readers 97

Accessories 102

w w w. l e d a s e c u r i t y. c o m . a u

L e d a S e c u r i t y P r o d u c t s P t y L t dA B N 2 3 0 6 7 2 5 8 2 3 5

Te l e p h o n e 1 3 0 0 7 8 0 4 5 0E m a i l s a l e s @ l e d a s e c u r i t y. c o m . a u

D i s t r i b u t e d b y

NSW Sales

Unit 8 / 185 Briens Rd

Northmead NSW 2152

PO Box 128

Wentworthville NSW 2145

Phone: 02 8413 3410

Fax: 02 8677 7119

VIC Sales

Unit 2 / 89 Enterprise Way

Sunshine West VIC 3020

PO Box 1091

Sunshine West VIC 3020

Phone: 03 8399 8150

Fax: 03 9315 1085

QLD Sales

Unit 2 / 387 Lytton Rd

Morningside QLD 4170

PO Box 186

Morningside QLD 4170

Phone: 07 3613 8270

Fax: 07 3399 5688

SA Sales

Unit 1 / 5 Tooronga Ave

Edwardstown SA 5039

Phone: 08 8374 3266

Fax: 08 8374 3299

Head Offi ce

& Manufacturing

18 Reliance Drive

Tuggerah NSW 2259

PO Box 5196

Chittaway Bay NSW 2261

Australia

Phone: +61 2 8413 3430

Fax: +61 2 4353 2255Australasian distributors and resellers in Northern Territory, north Queensland, Tasmania and New Zealand.

WA Sales

Unit 1 / 3 Finance Place

Malaga WA 6090

Phone: 08 6430 1670

Fax: 08 9209 2860

Architectural & Security Bollards · • Pedestrian delineation and separation • Ram raid...

Documents

Transcript of Architectural & Security Bollards · • Pedestrian delineation and separation • Ram raid...