Architectural Railing System...A clean minimalistic option for any venue, it allows for a variety of...
Transcript of Architectural Railing System...A clean minimalistic option for any venue, it allows for a variety of...
POINT™Architectural Railing System
7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-7245 w: trexcommercial.com
© 2017 Trex Commercial Products, Inc. All rights reserved. Trex® is a federally registered trademark of Trex Company, Inc., Winchester, Virginia
The Point Series provides a sleek aesthetic feature to balconies, and stairways. A clean minimalistic option for any venue, it allows for a variety of handrail options eliminating the need for a vertical baluster.
Point™ Series
7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-7245 w: trexcommercial.com
© 2017 Trex Commercial Products, Inc. All rights reserved. Trex® is a federally registered trademark of Trex Company, Inc., Winchester, Virginia
Tech Specifications
Material: Stainless Steel (suitable for interior and exterior applications)
Height: 42" or Custom
Standard spacing: 4' On Center
Mount Type: Fascia
Top Rail/Handrail: 1.5" Diameter (#4 Finish)
Component Finish: 42 RA Max (Directional)
Infill options: 3/4" laminated glass – Standard (Multiple Glass Configurations Available)
ASTM STDS: A240/A240M/A554/A555/A666 (Stainless), C1048-12 (Glass),
F837-08 & F2281-04 (S/S Hardware)
Mounting Options
Node mount is offered standard, but avariety of custom solutions are availableto meet project requirements.
Configuration Options
There are two standard configuration choices. • Handrail configuration has the glass at 42"
and a handrail at 36"• Top rail configuration with the top rail at 42" Other options can be achieved. Contact your Trex Commercial Products representative for more information.
Point™ Series
7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-7245 w: trexcommercial.com
© 2017 Trex Commercial Products, Inc. All rights reserved. Trex® is a federally registered trademark of Trex Company, Inc., Winchester, Virginia
Handrail Configuration
Top Rail Configuration
Handrail/Top Rail Splice
#10-24 X 1” LOWHEAD SHCS
4’-0” (TYP.)
4’-0” (TYP.)
3’-6”
3’-6”
3’-0”
2’-0” MAX.
2’-0” MAX.
INTERNALLY THREADED SPACER 2 1/2” DIM. TYP.
INTERNALLY THREADED SPACER 2 1/2” DIM. TYP.
1 1/2” O.D. STAINLESSSTEEL HANDRAIL
DOT SERIES HANDRAILSTAND-OFF
3/4” LAMINATED GLASS – STANDARD
(MULTIPLE GLASS CONFIGURATIONS
AVAILABLE)
3/4” LAMINATED GLASS – STANDARD
(MULTIPLE GLASS CONFIGURATIONS
AVAILABLE)
HAIRLINE JOINT
INTERNAL SPLICE-LOCKINTERNAL EPOXY
SPLICE SLEEVE
1 1/2" x 11 GA. S.S. TUBEHAIRLINE JOINT
3/8”-16 X 1”SET SCREW (2X)
Epoxy Splice Splice Lock
Point™ Series
7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-7245 w: trexcommercial.com
© 2017 Trex Commercial Products, Inc. All rights reserved. Trex® is a federally registered trademark of Trex Company, Inc., Winchester, Virginia
Point Node Standoff Options
Concrete Mounting Detail Stringer Mount Detail
Notes:Handrails can be mounted to concrete or steel. Anchor size and type may vary based on engineering requirements.
3/8” - 16 ANCHOR (TO 1 3/4” LENGTH) 1/2”-13 ANCHOR (1 3/4” - 2 3/4”) 3/4” - 10 ANCHOR (2 3/4”-6”)
3/8” - 16 ANCHOR (TO 1 3/4” LENGTH) 1/2”-13 ANCHOR (1 3/4” - 2 3/4”) 3/4” - 10 ANCHOR (2 3/4”-6”)
6” MAX. 6” MAX.
6” MIN.
6” MIN.
Line Series Flare Series Dot Series