ARCHITECTURAL CANOPY LIGHT LED · 2020. 9. 4. · pg1 4.5” 9” pg2 4.5” 14” a b pg1 with...

Project Name

Catalog #

Type

Date

PROJECT INFORMATION

www.XLM.com • (800) 678-6960 • [email protected] information is believed to be accurate at the time of publication. Please contact customer service or visit www.XLM.com for the

most updated product specifications. XtraLight® reserves the right to change specifications without notice.

ORDER LOGIC

ACL LED 200409

®

APPLICATIONS• Walkway/Canopy• Security Lighting

• Building Entrances• Parking Garages

FEATURES

• High performing architectural canopy LED luminaire offering uniform light distribution in a slim profile

• Surface mount for building entrances, walkways or canopies

• Field serviceable fixture utilizing patented LED technology

CONSTRUCTION

• Two-piece cast aluminum housing fully sealed with silicone gaskets

• All hardware is corrosion resistant

• Exposed surfaces are finished with a 5 stage powder coast process in gray finish

MOUNTING

• Surface mounted to a J-box or pendant mounted

ELECTRICAL

• Voltage: 120-277V 50/60Hz driver (dimming standard)

• Optional 20kA surge protection available

OPTICS

• A symmetric, square distribution delivers uniform light

• A glass TIR (total internal reflection) optic shapes the beam.Acrylic lens reduces glare for luminaires installed in a driving lane

• Best In Class LEDs: 4000K and 5000K CCT (min 70 CRI)

WARRANTY• Backed by XtraLight’s industry leading 10-year warranty

SAMPLE CATALOG NUMBER: ACLL-10000L-50K-DIM-GY

- - - DIM - - GY -

MODEL

3000L

5000L

6000L

8000L

10000L

ACL

ARCHITECTURAL CANOPY LIGHT LEDACL LED

APPROVALS• Complies with UL1598 and CSA C22.2#250.0.0:2008 • Suitable for wet locations• RoHS Compliant• BAA Compliant• Appropriate parts/test guidelines were performed by

ATAL www.ata-labs.com

FINISH

GY Gray

SPECIAL OPTIONS

FSP2 FSP-211 L2 8’MH/44’DIA

FSP3 FSP-211 L320’MH/40’DIA

SRG 20kA Surge Protection

CCT

40K 4000K

50K 5000K

SIZE

S Small

L Large

DRIVER

DIM Multi-Volt 120-277V, Dimming 0-10V

ACL LARGE

ACL SMALL

OPTICS

STD Standard

T5 Type V Garage Optics

http://www.ata-labs.com

®



DIMENSIONAL DATA

PHOTOMETRIC DATA

ACL LED 200409


®

DIMENSIONS

PG SERIES PARKING GARAGE LUMINAIRE

LED 5000 LUMEN AND 8000 LUMEN VERSIONS

H5.5.1

Project:

Fixture Type:

Location:

Contact/Phone:

PRODUCT DESCRIPTIONThe PG series luminaire is a small and efficient LED fixture for covered parking garages. Available in 2 lumen packages the PG series delivers up to 8000 lumens in two different size luminaires. The PG series outstanding uniformity and efficacy give customers a high quality lighting job while using a fraction of the energy of traditional light sources.

PRODUCT SPECIFICATIONSOptics A symmetric, square distribution delivers uniformity and energy efficiency • A glass TIR (Total Internal Reflection) optic shapes the beam • An optional polycarbonate lens can be ordered • This option reduces glare for fixtures that will be installed in the driving lane • Also a side shield can be ordered when more light control is required.

Mounting The fixture can be surface mounted to a J-box, or pendant mounted with a pipe • A trunion mounting option is also available • The pendant mounting option requires a wet location J-box and pipe (supplied by others).

Construction Two piece cast aluminum housing fully sealed with silicone gaskets • Glare shield is made of molded acrylic • All hardware is corrosion resistant.

Finish All exposed surfaces are finished with a 5 stage powder coat process in Silver finish.

Electrical The PG1 series fixtures use a 120-277V driver • The PG2 series fixtures can be ordered with a 120-277V driver, or an optional 347-480V driver.

Thermal Performance PG1 fixtures can operate between -22˚F and 113˚F (-30˚C to 45˚C) • PG2 fixtures can operate between -40˚F and 113˚F (-40˚C to 45˚C) • L70 at 25˚C is 100,000 hrs.

Dimming Fixtures can be ordered with an optional 0-10V dimming driver.

Emergency Lighting Fixtures can be ordered with an integrally mounted emergency battery • The emergency battery pack will run the fixture at a reduced illumination level for 90 minutes • Option available only with PG2-A04 fixtures • Operating ambient temperature range is -22˚F to 113˚F (-30˚C to 45˚C) • Available for 120V-277V (“UN” or individual voltage codes).

Motion Detection The PG series luminaires can be equipped with two motion detection options • Both options use a sensor attached to the fixture that can be locally adjusted for sensitivity • Option “M” uses the sensor to switch the fixture ON and OFF (the fixture is normally OFF, and when motion is sensed the fixtures turns ON) • Option “S” uses the sensor to switch the fixtures from Low light setting to High light setting (the fixture is normally operating in the Low light setting, and when motion is detected the sensor switches the fixture to the High light set-ting) • The Low light level setting is approximately 20% of full light output • PG1 size fixtures are always supplied with the motion sensors attached to the side of the fixture • Standard PG2 size fixtures (no optional poly lens) are also supplied with the motion sensor attached to the side of the fixtures • PG2 size fixtures with the optional polycarbonate lens (PL option) are supplied with the sensor mounted to the poly lens, in the middle of the fixture

Certification Meets UL1598/CSA C22.2 250 standards • Suitable for wet locations • Union made • Meets “Buy American Act” • Assembled in the USA • 5 year limited warranty.

Specifications subject to change without notice.

LED PERFORMANCE DATA (120VAC) Input Delivered EfficacyCatalog Number Watts PF THDI % Lumens CCT (K) (lm/W)PG1-A04-4K-UN-5-SL 54 0.984 12.0 5,454 4000K 101PG1-A04-4K-UN-5-SL-PL 54 0.984 12.0 4,537 4000K 84PG1-A02-4K-UN-5-SL 32 0.990 11.8 2,707 4000K 84PG1-A02-4K-UN-5-SL-PL 32 0.990 11.8 2,291 4000K 71PG2-A08-4K-UN-5-SL 84 0.925 12.1 8,169 4000K 97PG2-A08-4K-UN-5-SL-PL 84 0.925 12.1 6,961 4000K 83

REV-11/14

A BPG1 4.5” 9”PG2 4.5” 14”

A

B

PG1 WITH OPTIONAL POLYCARBONATE LENS

PG2 WITH OPTIONAL POLYCARBONATE LENS

PG1 STANDARD FIXTURE

PG2 STANDARD FIXTURE

PG2 WITH OPTIONAL BATTERY PACK

SMALL

LARGE

ACLS-5000L

Catalog Number: ACLS-5000L-40K-DIM-NO-GY

Report Number: ATAL029386.iesIssue Date: 03/18/19Lamp: (1) LED COBOptics: NoneIESNA: LM-63-2002Total Input Watts: 48.0Efficacy (Lm/W): 108.9Total Lumens: 5226Prepared by: American Testing & Assessment LaboratoryNOTE: Data shown is absolute for product shown. BUG RATING B2-U2-G1

ACLS-5000L

Catalog Number: ACLS-5000L-40K-DIM-T5-GY

Report Number: ATAL029387.iesIssue Date: 03/18/19Lamp: (1) LED COBOptics: Type V OpticsIESNA: LM-63-2002Total Input Watts: 48.0Efficacy (Lm/W): 99.0Total Lumens: 4735Prepared by: American Testing & Assessment LaboratoryNOTE: Data shown is absolute for product shown. BUG RATING B2-U3-G1

ACLL-10000L

Catalog Number: ACLL-10000L-40K-DIM-T5-GY

Report Number: ATAL020073.iesIssue Date: 08/22/17Lamp: (4) LED COBsOptics: Type V OpticsIESNA: LM-63-2002Total Input Watts: 85.9Efficacy (Lm/W): 119.7Total Lumens: 10286Prepared by: American Testing & Assessment LaboratoryNOTE: Data shown is absolute for product shown. BUG RATING B3-U3-G2

PRODUCT PERFORMANCE

MODEL OPTIC CCT WATTS LUMENS EFFICACY

5000L None 4000K 48.0 5226 108.9

5000L T5 4000K 48.0 4735 99.0

10000L T5 4000K 85.9 10286 119.7



ACL LED 200409


®

LIGHTING CONTROLS

Option FSP3 FSP-211 L3 20' Mounting Height 40' Diameter

Option FSP2 FSP-211 L2 8' Mounting Height 44' Diameter

www.wattstopper.com8 0 0 . 8 7 9 . 8 5 8 5

Coverage

Dimensions of Lens Options

FSP-L3 top and side coverage patterns



FSP-L2 dimensions FSP-L3 dimensions FSP-L4 dimensions

0’ 3’ 6’ 12’ 27’30’

3’6’12’27’30’

20’ 20’

0’3’6’

3’6’

12’

27’

30’

12’

27’

20’

20’

60’

30’

0’

10’

20’

30’

40’0’ 6’ 12’ 30’6’12’20’ 20’

20’ 10’ 0’ 10’ 20’

0’

20’

10’

10’

20’

40’

0’3’ 9’6’3’6’9’12’ 12’

10’

20’

0’

15’

5’

15’18’20’ 15’ 18’ 20

0'

8'

0' 3'3' 7'7' 11'11' 24'24'

30'

20'

10'

10'

20'

0'

10' 0' 10' 20'20'

60 ft

2.33”59.2mm

0.78”19.7mm

2.33”59.2mm

0.78”19.7mm

3.2”81.3mm

0.93”23.6mm

FSP-L7 top and side coverage patterns0'10' 10'20' 20'30' 30'40' 40'

0'

27'

40'

50'50'50' 25' 0' 25' 50'

0'

50'

25'

25'

50'

100'

FSP-L7 dimensions

3.2”81.3mm

1.04”26.4mm

WWW.LEGRAND.US/WATTSTOPPER

WATTSTOPPER®FIXTURE SENSORS & CONTROLS

DescriptionThe FSP-211 mounts in an outdoor lighting fixture and provides multi-level control based on motion and/or daylight contribution. It controls 0-10 VDC LED drivers or dimming ballasts, as well as non-dimming ballasts and, with an FSP-Lx Lens, is rated for wet and cold locations. All control parameters are adjustable via a wireless configuration tool capable of storing and transmitting sensor profiles.

OperationTypically, the sensor ramps lighting On to the selected High mode level when motion is detected and the ambient light level is below the hold off setpoint. After the sensor stops detecting movement and the time delay elapses, lights fade to the Low mode level. If there is no motion during the subsequent cut off time delay, the lights will turn Off. For dusk to dawn control, the integral photocell can switch the lights On and Off based on the ambient light level so that lighting remains on overnight even without motion detection.

Wireless Handheld Configuration ToolInitial setup and subsequent sensor adjustments are made using a handheld configuration tool (FSIR-100). This tool enables adjustment of parameters including high and low modes, sensitivity, time delay, cut off and more. The FSIR-100 is also used to initiate automatic calibration of the FSP-211 ambient light level setpoint. The setpoint is used to hold the controlled lighting off or at low level when there is sufficient daylight. The wireless tool stores up to six sensor parameter profiles to speed configuration of multiple sensors.

ApplicationsThe slim, low-profile FSP-211 is designed for installation inside the bottom of a light fixture body. When fully assembled and installed in an IP66-rated fixture, the sensor and FSP-Lx lenses are IP66 outdoor rated. The sensor is ideal for areas such as parking facilities, gas stations, pedestrian pathways and warehouses. A choice of four lenses ensures complete coverage for mounting heights up to 40’.

LINE VOLTAGE HIGH/LOW/OFF PIR FIXTURE INTEGRATED OUT-DOOR PHOTO/MOTION SENSOR

FSP-211

• Provides line voltage On/Off switching and 0-10 VDC dimming control

• Works with ballasts or LED drivers

• High and low modes fully adjustable from 0 to 10V

• Time delay from 5 to 30 minutes

• Optional cut off delay

• Adjustable ramp up and fade down times

• Optional daylighting setpoints feature automatic calibration, or permit manual adjustment

• Configuration tool stores six sensor profiles for quick setup and adjustment of multiple sensors

• Polycarbonate construction; flame retardant, UV resistant, impact resistant, recyclable

• UL244A and UL508; IP66 rated (when fully assembled and installed) for use in wet locations

• This product meets the materials restrictions of RoHS

• BAA/TAA-compliant models available

Features

Fully adjustable high and low dimmed light levels; optional

dusk to dawn control

Adjustable via handheld wireless configuration tool

Adjustable time delay and cut off delay

Designed for LED fixtures; rated for extreme

temperatures and up to 200,000 on/off cycles

IP66 rated with choice of lenses for wet and outdoor locations, and mounting heights from 8’ to 40’

Hold off setpoint with automatic calibration option

for convenience and added energy savings

WATTSTOPPER®

2.33”59.2mm

0.78”19.7mm

FSP-L4: 360° CoverageThe FSP-L4 is designed for mounting at heights between 30’ to 40’ . Its coverage area can be up to 60’ in diameter when mounted at 40’ .

COVERAGE PATTERN

Density and range of the coverage pattern is determined by the type of lens and mounting height .

FSP-L2: 360° CoverageThe FSP-L2 lens provides a 44’ diameter coverage area when mounted at a height of 8’ .

FSP‑L3 High Densi ty/Reduced Range Lens

FSP‑L2 Low Densi ty/Wide Range Lens

03 9636912 12

10

20

0

15

5

151820 15 18 20

20 10 0 10 20

0

20

10

10

20

40 ft

2.33”59.2mm

0.78”19.7mm

30

30

20

10

10

20

0

8

0

10 0

0 33 77 1111 2222

10 2020

44 ft

FSP‑L4 40 Foot High Bay Lens

0 6 12 3061230 20 20

0

10

20

30

40

0 3 6 12 2730

36122730

20 20

036

36

12

27

30

12

27

20

20

60 ft

3.2”81.3mm

0.93”23.6mm

FSP-L3: 360° CoverageThe FSP-L3 has a high density lens that covers a 40’ diameter area at a height of 20’ .

WIRING A SINGLE SENSOR

Non-DimmingDriver

LIN

EN

EU

TRA

L

NEUTRAL

LOAD

* GROUND

Occupancy Sensor

5E4

800.879.8585www.wattstopper.com

1519

5r1

LOA

D

LIN

E

NEU

T(v

iole

t)

(gre

y)

18-20 AWG Solid CU Wire Only

230 VAC, 50 Hz1200W max ballast

FSP-211

GRN

D

DIM

-

DIM

+


High/Low PIR

Non-Dimming Driver

DimmingDriver

LIN

EN

EU

TRA

L

NEUTRAL

*GROUND

GRAY (-)

VIOLET (+)

LOAD

Occupancy Sensor

5E4


1519

5r1

LOA

D

LIN

E

NEU

T(v

iole

t)

(gre

y)



FSP-211

GRN

D

DIM

-

DIM

+


High/Low PIR

Dimming Driver

1 . Determine an appropriate mounting location inside the light fixture . Allow a minimum distance of 0 .2” (5 .1mm) from the wiring end of the sensor to the wall of the fixture .

2 . Drill a hole 1 .30” (33 .0mm) in diameter through the sheet metal in the bottom of the fixture .

3 . Add the rubber gasket to the threaded collar, and install the sensor face down, parallel to the mounting surface . Ensure the rubber gasket touches the inside surface of the fixture . Install the plastic nut securely against the fixture to a torque of 25-30 in-lbs to ensure IP rating is maintained .

4 . Align the locking features between the sensor and lens module and push the lens module forward until the o-ring seals firmly . Turn the lens module clockwise to ensure it locks in place .

5 . Connect load and supply wires as shown in wiring diagram .6 . Restore power from the circuit breaker .

CAUTION TURN THE POWER OFF AT THE CIRCUIT BREAKER

BEFORE INSTALLING THE SENSOR.

TighteningNut

TighteningNut Fixture

Wall

Lens Assembly

FSP-211

Outside Fixture Wall

Inside FixtureWall

RubberGasket

RubberGasket

Note: The Outside Fixture Wall thickness should be no greater than 0 .125” (3 .18mm) for optimal sensor mounting and security .

* Note: The FSP-211 must be grounded to ensure signal integrity, not for safety ground .

Outdoor Use at the exposed Sensor Collar part only when installed at the specific location per Installation

Instructions with a Listed Outdoor Enclosure.

INSTALLATION

30

30

20

10

10

20

0

8

0

10 0

0 33 77 1111 2222

10 2020

44 ft

Coverage Top View

Coverage Top View

Coverage Top View

Coverage Side View

Coverage Side View

Coverage Side View

2.33”59.2mm

0.78”19.7mm

FSP-L4: 360° CoverageThe FSP-L4 is designed for mounting at heights between 30’ to 40’ . Its coverage area can be up to 60’ in diameter when mounted at 40’ .

COVERAGE PATTERN

Density and range of the coverage pattern is determined by the type of lens and mounting height .

FSP-L2: 360° CoverageThe FSP-L2 lens provides a 44’ diameter coverage area when mounted at a height of 8’ .

FSP‑L3 High Densi ty/Reduced Range Lens

FSP‑L2 Low Densi ty/Wide Range Lens

03 9636912 12

10

20

0

15

5

151820 15 18 20

20 10 0 10 20

0

20

10

10

20

40 ft

2.33”59.2mm

0.78”19.7mm

30

30

20

10

10

20

0

8

0

10 0

0 33 77 1111 2222

10 2020

44 ft

FSP‑L4 40 Foot High Bay Lens

0 6 12 3061230 20 20

0

10

20

30

40

0 3 6 12 2730

36122730

20 20

036

36

12

27

30

12

27

20

20

60 ft

3.2”81.3mm

0.93”23.6mm

FSP-L3: 360° CoverageThe FSP-L3 has a high density lens that covers a 40’ diameter area at a height of 20’ .

WIRING A SINGLE SENSOR

Non-DimmingDriver

LIN

EN

EU

TRA

L

NEUTRAL

LOAD

* GROUND

Occupancy Sensor

5E4


1519

5r1

LOA

D

LIN

E

NEU

T(v

iole

t)

(gre

y)



FSP-211

GRN

D

DIM

-

DIM

+


High/Low PIR

Non-Dimming Driver

DimmingDriver

LIN

EN

EU

TRA

L

NEUTRAL

*GROUND

GRAY (-)

VIOLET (+)

LOAD

Occupancy Sensor

5E4


1519

5r1

LOA

D

LIN

E

NEU

T(v

iole

t)

(gre

y)



FSP-211

GRN

D

DIM

-

DIM

+


High/Low PIR

Dimming Driver

1 . Determine an appropriate mounting location inside the light fixture . Allow a minimum distance of 0 .2” (5 .1mm) from the wiring end of the sensor to the wall of the fixture .

2 . Drill a hole 1 .30” (33 .0mm) in diameter through the sheet metal in the bottom of the fixture .

3 . Add the rubber gasket to the threaded collar, and install the sensor face down, parallel to the mounting surface . Ensure the rubber gasket touches the inside surface of the fixture . Install the plastic nut securely against the fixture to a torque of 25-30 in-lbs to ensure IP rating is maintained .

4 . Align the locking features between the sensor and lens module and push the lens module forward until the o-ring seals firmly . Turn the lens module clockwise to ensure it locks in place .

5 . Connect load and supply wires as shown in wiring diagram .6 . Restore power from the circuit breaker .

CAUTION TURN THE POWER OFF AT THE CIRCUIT BREAKER

BEFORE INSTALLING THE SENSOR.

TighteningNut

TighteningNut Fixture

Wall

Lens Assembly

FSP-211

Outside Fixture Wall

Inside FixtureWall

RubberGasket

RubberGasket

Note: The Outside Fixture Wall thickness should be no greater than 0 .125” (3 .18mm) for optimal sensor mounting and security .

* Note: The FSP-211 must be grounded to ensure signal integrity, not for safety ground .

Outdoor Use at the exposed Sensor Collar part only when installed at the specific location per Installation

Instructions with a Listed Outdoor Enclosure.

INSTALLATION

30

30

20

10

10

20

0

8

0

10 0

0 33 77 1111 2222

10 2020

44 ft

Coverage Top View

Coverage Top View

Coverage Top View

Coverage Side View

Coverage Side View

Coverage Side View

ARCHITECTURAL CANOPY LIGHT LED · 2020. 9. 4. · pg1 4.5” 9” pg2 4.5” 14” a b pg1 with...

Documents

Transcript of ARCHITECTURAL CANOPY LIGHT LED · 2020. 9. 4. · pg1 4.5” 9” pg2 4.5” 14” a b pg1 with...