ARB Compressors -...
Transcript of ARB Compressors -...
GENUINE WHOLESALE LEGENDARY SERVICE®227
ORDER DESK/HOT LINE: 1-888-919-8866TELEPHONE: (604) 626-4100
OFF ROAD
OFF R
OA
D
• Provides 100% traction on demand without affecting on road drivability or driveline wear
• Vastly improved traction means less reliance on momentum, which reduces the likelihood of vehicle damage and environmental impact
• Easy, convenient operation allows the user to concentrate on the terrain without leaving the comfort and safety of the driver’s seat
• Ultra durable and extremely strong - only the highest quality materials used in construction
• Incredibly simple yet effective design that employs minimal moving parts, thereby ensuring maximum reliability
• Thoroughly tested and proven design – trusted and used in over 80 countries around the world
• Front and rear Air Lockers available for most makes and models• 4WD & 2WD applications• Easy installation and maintenance – no special tools, skills or additives required
ARB Airlocker
ARB Airlocker
SPECIAL ORDER
ARB Compressors
ARB-CKMA12
ON-BOARD HIGH PERFORMANCE 12 VOLT AIR COMPRESSOR
ARB-CKMTA12
ON-BOARD HIGH PERFORMANCE12 VOLT AIR TWIN AIR COMPRESSOR
ARB's CKMTA12 twin on-board compressor kit was designed to fill the market need for a compact sized yet high-volume compressed air source to suit the high volume airflow needs of most air powered tools, and also to suit the actuation and control needs of the ARB Air Locker, and the harsh and demanding environment of the ARB Air Locker user.
Permanently mounted, this compressor is installed into your truck and includes a full wiring loom with air locker solenoid plug in contacts, mounting hardware with reinforcing bracket and quality compressor isolating switch. This compressor, with the addition of ARB Pump-Up Kit (part #171302) can be used to activate air lockers, and can perform other functions such as inflating camping gear and tires.
ON-BOARD HIGH PERFORMANCE 12 VOLT AIR COMPRESSOR
Permanently mounted, this compressor is installed into your truck and includes a full wiring loom with air locker solenoid plug in contacts, mounting hardware with reinforcing bracket and quality compressor isolating switch. This compressor is designed to activate up to two ARB air lockers.
ARB-CKSA12
TIRE INFLATION KIT• Easy to read dial with dual scale PSI/Bar
increments• 13’ stainless braided flexible hose• Quality bronze bourdon tube design• Fully geared solid brass movement• 1⁄4 NPT US standard male fitting
ARB-ARB605
TIRE INFLATION KIT• High heat tolerant hose• Designed for maximum air flow• Includes a dust free air chuck• ARB-171302
ARB Compressor Accessories
GENUINE WHOLESALE LEGENDARY SERVICE 228®
TELEPHONE: (604) 626-4100 ORDER DESK/HOT LINE: 1-888-919-8866
OFF ROADO
FF RO
AD
When the only thing preventing your vehicle from imminent danger is a narrow strip of fabric, nothing but the best will do. Don’t trust your vehicle to substandard recovery products that could jeopardize your safety and your vehicle. Likewise, make sure you’re using appropriate equipment for your situation. The old adage “the right tool for the job” can certainly be applied to vehicle recovery. For every situation, there is an article of recovery gear specifically designed to handle the task.
Part No. Strength Length WidthARB-ARB705 17,500lb 30 ft. 2-3/8”ARB-ARB710 24,000lb 30 ft. 3-1/4”ARB-ARB715 33,000lb 30 ft. 4-1/3”
Tree Trunk Protector
Part No. Strength Length WidthARB-ARB730 26,500lb 10ft. 3”ARB-ARB735 26,500lb 16ft. 3”
Snatch Straps Extension Straps
Part No. Strength Length WidthARB-ARB720 9,900lb 66 ft. 2-1/8”ARB-ARB725 17,500lb 66 ft. 3-1/8”
®
Winch PackARB-ARB501ARB’s large style bag is designed to fit a complete recovery kit including, snatch strap, tree protector, winch strap, snatch block, damper, bow shackles & gloves
Snatch PackARB-ARB502A mult-purpose bag that will suit a variety of equipment.
Bag only, contents not included.
Bag only, contents not included.
Break Break Break
KIT CONTENTS• 1x P/No. ARB501 Recovery Bag Larg• 1x P/No. ARB705 17,500lb Snatch Strap• 1x P/No. ARB730 26,500lb x 10’ Tree Trunk Protector• 1x P/No. ARB720 9,900lb x 66’ Winch Extension Strap• 1x P/No. ARB220 Recovery Damper• 1x P/No. GLOVES Leather Recovery Gloves• 2x P/No. ARB207D 10,640lbs, 3/4” Pin, D-Shackle• 1x P/No. 10100020 Snatch Block 9000
Premium Recovery Kit
ARB-RK9
Part No. Style Break Strength (lbs) Length Width PackagingERI-08409 Axle Strap 10,000 24" 2" clamshellERI-59600 Recovery Strap 18,000 30' 2" bagERI-59800 Recovery Strap 27,000 30' 3" bagERI-59801 Recovery Strap 35,000 30' 4" bulkERI-09506 Tree Saver Strap 15,000 6' 4" bulk
GENUINE WHOLESALE LEGENDARY SERVICE®229
ORDER DESK/HOT LINE: 1-888-919-8866TELEPHONE: (604) 626-4100
OFF ROAD
OFF R
OA
D
An assortment of high quality vehicle recovery accessories, appropriately selected to suit your vehicle and environment, is essential to safe back country travel.
Winch Cable Damper ARB-ARB220
Snatch BlockARB-ARB209
Shackles
ARB’s Cable Damper is manufactured from heavy duty vinyl and features storage pockets which come in handy for carrying snatch blocks and shackles when walking from your 4WD to an anchor point.
WHILE WINCH STRAPS SOLD BY ARB ARE EXCEPTIONALLY STRONG, IT IS ESSENTIAL THAT SAFETY PRECAUTIONS ARE OBSERVED TO AVOID INJURY IN THE EVENT OF A FAILURE.
ARB-207B - SmallARB-207D - Large
• Specifications:• working load: 19,800lb• breaking strength: 38,500lb• side plate material: 1/5" cold
rolled steel• pulley material: specialized
polymer• pulley diameter: 4 1/3"• cable size: 1/3" - 1/2"• weight: 5.3lb
Snatch Block 9000ARB-10100020
• Specifications:• working load: 15,400lb• breaking strength: 31,900lb• side plate material: 3/16" cold
rolled steel• pulley material: solid billet steel• pulley diameter: 3 2/3"• cable size: 1/4" - 1/2"• weight: 7.7lb
GENUINE WHOLESALE LEGENDARY SERVICE 230®
TELEPHONE: (604) 626-4100 ORDER DESK/HOT LINE: 1-888-919-8866
OFF ROADO
FF RO
AD
®
Speedy Seal Repair KitARB-10000010
EZ Tire DeflatorARB-ARB505
X-Jack Exhaust Jack ARB-72X10
• Corrosion resistant brass/stainless deflator tool
• Quality bronze Bourdon Tube gauge design ensures accuracy is not affected by changes in temperature, humidity or altitude
• Fully geared, solid brass precision movement
• Protective rubber gauge guard
• Easy to read dial with 1 PSI increments
• Thoroughly designed and tested to ensure accuracy
• Includes protective canvas pouch and instruction sheet
Coming in a compact carry case, the Speedy Seal includes all the components necessary to repair tubeless radial or cross ply tires, without removing the tire from the vehicle or rim. This includes a quality pencil type tire gauge with dual pressure range and dual chuck, insertion and reamer tools, lubricant, additional valve accessories and 30 self vulcanizing repair cords for complete air sealing. Spare repair cords are also available in packs of 50 from ARB, so before you head out on your next 4x4 trip, make sure you’ve got all the necessary equipment for making emergency repairs
Crawling around under your vehicle to safely position your conventional jack can now be a thing of the past. With an ARB X-Jack, simply place the unit on the ground beneath the side of the vehicle to be raised and connect the hose to your tailpipe. When the engine is started, the jack inflates. With a lifting capacity of 8800 pounds, an exhaust jack is the fastest way to lift your vehicle up to 30 inches.
GENUINE WHOLESALE LEGENDARY SERVICE®231
ORDER DESK/HOT LINE: 1-888-919-8866TELEPHONE: (604) 626-4100
OFF ROAD
OFF R
OA
D
T-MAX WINCH DISPLAYWES-55448
WINCH DISPLAY INCLUDES:• T-MAX Display Tower• Graphic Header• T-MAX Off-Road (Demo) Winch• T-MAX Outback (Demo) Winch
EWI-1200012000Lbs
• Rated Line Pull -12000Lbs (5440kg) Single Line• Motor -6.6hp Series Wound• Control - Wireless Multi-control• Solenoid Style - Integrated Solenoid Module (ISM)• Gear train - 3 Stage Planetary• Gear ratio 265:1• Clutch - Sliding Ring Gear• Braking- Automatic In-the-Drum• Drum size - Diameter 2.52”(64mm)• Wire Rope - 100’ Length(30m) 3/8” Diameter(9.5mm)• Fairlead- 4way roller Fairlead• Remote Control- Included• Recommended Battery - 650CCA minimum for winching• Battery Leads - 2 guage 72” (1.83m)
OUT BACK6.6 HP
Wireless controller included
WES-47-1795
WES-47-1612
®
EWI-95009500Lbs
• Rated Line Pull -9500Lbs (4300kgs) Single Line• Motor -6.6hp 12V Series Wound• Control - Wireless Multi-control• Solenoid style - Integrated Solenoid Module (ISM)• Gear train - 3 Stage Planetary• Gear ratio 218:1• Clutch - Sliding Ring Gear• Braking- Automatic In-the-Drum• Drum size - Diameter 2.52"(64mm).Length 8.82"(224mm)• Cable- 100' Length (30m) 21/64"Diameter(8.2mm)• Fairlead- 4way roller Fairlead• Remote Control - Included• Recommended Battery - 650CCA minimum for winching• Battery Leads - 2 guage 72" (1.8m)
OUT BACK6.6 HP
Wireless controller included
FOURWHEELER Magazine “Multi Winch” Shootout
July 2011
CALL YOUR SALES REP. FOR
MORE INFO
GENUINE WHOLESALE LEGENDARY SERVICE 232®
TELEPHONE: (604) 626-4100 ORDER DESK/HOT LINE: 1-888-919-8866
OFF ROADO
FF RO
AD
EW-11000
PRO-4500WES-47-1245
PRO-3500WES-47-1235
EW-85008500Lbs
• Rated Line Pull -8500Lbs (3850kgs) Single Line• Motor -5.5hp 12V Series Wound• Control - Corded hand-held control included,12’ lead(3.7m)• Gear train - 3 Stage Planetary• Gear ratio 172.8:1• Clutch - Shift Pin Ring Gear• Brake- Automatic In-the-Drum• Drum size - Diameter 2.52”(63.5mm).Length 8.75”(222mm)• Rope- Galvanized Aircraft Cable with replaceable Clovis hook.
Length 94’(28m) of 5/16” (8.2mm) Diameter• Fairlead- 4way roller Fairlead• Remote Control - Included• Recommended Battery - 650CCA minimum for winching
OFF ROAD5.5 HP
• Rated Line Pull -11000Lbs (4985kgs) Single Line• Motor -5.5hp 12V Series Wound• Control - Corded Hand-held Control Included 12” lead (3.7m)l• Solenoid style - Integrated Solenoid Module (ISM)• Gear train - 3 Stage Planetary• Gear ratio 265:1• Clutch - Sliding Ring Gear• Braking- Automatic In-the-Drum• Drum size - Diameter 2.52”(64mm).Length 8.82”(224mm)• Rope Galvanized Aircraft Cable with replaceable Clovis hook-
94’(28m of 5/16”(8.2mm)diameter• Fairlead- 4-way roller Fairlead• Remote Control - Included• Recommended Battery - 650CCA minimum for winching• Battery Leads - 2 guage 72” (1.83m)
OFF ROAD5.5 HP
• Rated Line Pull -4500Lbs (2040Kgs) Single Line• Motor -12V DC 1.3hp (Permanent Magnet• Control - Corded Hand-held Control Included• Gear Train - 3 Stage Planetary• Gear ratio 189:1• Clutch - Turn 90° by Handwheel• Braking- Eccentric Block Type EBT• Wire Rope- Galvanized Aircraft Cable Length 50', of1/4" DIameter• Fairlead- Aluminum Fairlead• Drum size - 2.0"Diameter x 4.7" Length (520x119mm)• Recommended Battery - 650CCA minimum for winchin
• Rated Line Pull -3500Lbs (1587kgs) Rated Single Line• Motor -12V DC 1.1HP Permanent Magnet• Control -Handlebar Mounted Switch Included• Gear ratio 153:1• Clutch - Turn 90° by Handwheel• Brake- Eccentric Block Type (EBT)• Drum size - (Diameter x Length) 2.0"x2.9"(52mmx74mm)• Wire Rope- Galvanized Aircraft Cable, Length 31' of 1/4"
Diameter• Fairlead- 4-way roller Fairlead• Recommended Battery - 650CCA minimum for winching
ATV & TRAILER SERIES
ATV & TRAILER SERIES
Cordedcontroller included
WES-47-1411
WES-47-1486
Cordedcontroller included
GENUINE WHOLESALE LEGENDARY SERVICE®233
ORDER DESK/HOT LINE: 1-888-919-8866TELEPHONE: (604) 626-4100
OFF ROAD
OFF R
OA
D
VIA- 40043
400P AIR COMPRESSOR
• 12-volt• Permanent Magnetic Motor• Duty Cycle: 33% @ 100PSI• Max. Working Pressure: 150 PSI• Max. Amp Draw: 26 Amps• Min. Ambient Temp: -40˚F• Max. Ambient Temp: 158˚F• Weight: 10.93 lbs.
VIA- 30033
300P POWERSPORT SERIES AIR COMPRESSOR
90P AIR COMPRESSOR VIA- 00093
VIA- 40045
400P AUTOMATICAIR COMPRESSOR
FOR UP TO
TALL TIRES35”
FOR UP TO
TALL TIRES33”
FOR UP TO
TALL TIRES35”
Technical Specs:
400P is a larger portable compressor kit that can inflate up to a 35-inch tire from 0 to30 PSI in less than 5 minutes. Used and approved of by off road enthusiasts worldwide, the 400P can save you when you’re miles from home.
Viair 300P compressor (VIA 30033) is a larger portable compressor kit that is capable of inflating up to 33-inch tires easily by simply clamping the power leads to your battery, connecting the tire chuck to valve stem and turning the unit on. The tire pressure can be monitored using the 5-in-1 inflator/deflator inline pressure gauge.
The VIAIR 90P Portable Air Compressor comes in handy for other uses as well. It inflates water toys at the river, blows up air mattresses on camping trips, and even fills your bicycle's tires. With its 15% duty cycle and 120 psi maximum working pressure, this portable compressor has the strength for light- and medium-duty jobs
85P is a small portable compressor with a built-in LED work light, capable of inflating up to 31-inch tires by simply plugging into your cigarette lighter power port (14.5 amps max.). Connect the screw-on tire chuck to a tire valve stem before turning the unit on. Tire pressure can be monitored using the gauge incorporated into the top of the unit.
400P-Automatic is VIAIR’s first Automatic shut-off function portable compressor. This 33% duty cycle unit is capable of pressures up to 150 PSI and can be operated for up to 40 minutes at a time before needing to be rested. The 400P-Automatic comes with a close-ended gas station-style air gun for added convenience.
88P is a newly-designed, portable compressor, capable of inflating up to 33-inch tires. Attach the heavy duty battery clamps to your vehicle’s battery, and start the engine. Connect to a tire valve stem and turn the unit on. Tire pressure can easily be checked using the gauge incorporated into the top of the unit.
FOR UP TO
TALL TIRES31”
FOR UP TO
TALL TIRES31”FOR UP TO
TALL TIRES33”
85P AIR COMPRESSOR VIA- 00085
88P AIR COMPRESSOR VIA- 00088
GENUINE WHOLESALE LEGENDARY SERVICE 234®
TELEPHONE: (604) 626-4100 ORDER DESK/HOT LINE: 1-888-919-8866
OFF ROADO
FF RO
AD
VIA- 90058 – 0-15 PSIVIA- 90056 – 0-35 PSIVIA- 90072 – 0-100 PSI
VIA- 10008
SUPER DUTYONBOARD AIRSYSTEM
ONBOARD AIRSYSTEMS
AIR ACCESSORIESTIRE GAUGE 2”
VIA- 00032VIA- 90057 0-35 PSIVIA- 90059 0-15 PSI
VIA- 90073 0-100 PSI
TIRE GAUGE 2.5” 3-IN-1 AIR DOWN GAUGE
TIRE INFLATE GUN VIA- 00041
AIR SOURCERELOCATION KIT
TIRE INFLATION GUN
VIA- 90007
The Super Duty Onboard Air System comes complete with a two 325C, 33% Duty Cycle compressors at its heart that will fill the supplied 2.0 gallon tank from 110-150 PSI in approximately 24 seconds. Unlike our other systems, the Super Duty Onboard Air System includes a regulator and can run air tools. Included is everything you'll need to add a reliable air source to your vehicle as well as inflate tires with the included tire inflation gun. (For vehicles with up to 35-inch tires)
PARTS INCLUDED:(1) 2.0 Gallon Viair Air Tank(2) 325C VIAIR Compressors(1) 30ft. Coil Hose(1) Tire Inflation Gun with 200 PSI Gauge(1) 0-150 PSI Pressure Regulator(1) Blow Gun(1) 1/4" NPT Quick Connect Coupler (F)(1) Dash Panel Gauge with ON/OFF Switch(1) Pressure Switch with Relay (110 PSI on, 150 PSI off)(2) 40-amp Relays(1) Inline Fuse Holder w/ Fuse(1) 1/4" NPT 175 PSI Safety Valve(1) 1/4" Drain Cock(2) 1/8" BSP to 1/4" NPT (Air Locker Use)(5) 1/4" NPT Compression Fittings(1) 4-inch Strip of Continuous Grommet Material(1) 20ft. 12 Gauge Wire with Inline Fuse Holder(2) T-Fitting (1/4"(M) x 1/4"(F) x 1/8"(F))(1) Electrical Connections
VIA- 10007 PARTS INCLUDED:2.5 Gallon Viair Air Tank450C model Viair Air Compressor35ft. Coil Hose1/4" Quick Connect Stud (F)1/4" NPT Quick Connect Coupler (F)Dash Panel Gauge with ON/OFF SwitchPressure Switch with Relay (110 PSI on, 150 PSI off)Reducer (1/8" NPT F to 1/4" NPT M)1/4" NPT 175 PSI Safety Valve1/4" Drain Cock1/4" NPT Compression Fittings (3)4-inch Strip of Continuous Grommet Material20ft. 12 Gauge Wire with Inline Fuse HolderThis kit will air a 35x12.5 tire from 15 to 30psi in 3.5 minutes!
FOR UP TO
TALL TIRES35”
Air Tool Usage Clean Debris Tire Inflation
Air Tool Usage Clean Debris Tire Inflation
Rapid hands-free air down adjustment with easy fine tuning c/w 15’ feet of air line
Features a normally-closed air chuck that can be opened by pressing the lever on the inflation gun.
THE SPRINTERVIA- 10005This 2.54 CFM, 33% Duty Cycle, 400 CC compressor will fill a 35” tire from flat in a blazing 4 min. 50 seconds. The VIA-10005 comes with everything the VIA-10007 comes with for attachments but is built for speed, not work load.
THE MARATHONERVIA- 10007The Constant Duty Onboard Air System comes complete with a long-running 450C, 100% Duty Cycle compressor at its heart that will fill the supplied 2.5 gallon tank from 110-150 PSI in approximately one minute. Unlike our other systems, the Constant Duty Onboard Air System can operate for longer periods of time without needing to rest. 37-inch tires)
FOR UP TO
TALL TIRES37”
THE WORKER
FOR UP TO
TALL TIRES35”
BLOW GUN VIA- 00045
NEW DIGI-GAUGEThe gauge offers precise readings that are accurate to within one psi. Using the same button, units of measure can be toggled between PSI / BAR & kPa, ON & OFF
VIA- 90052
GENUINE WHOLESALE LEGENDARY SERVICE®235
ORDER DESK/HOT LINE: 1-888-919-8866TELEPHONE: (604) 626-4100
OFF ROAD
OFF R
OA
D
TOP WINCH-CONNECTORCLAMPFitted as standard with every HI-LIFT Jack.
POWDER COATED FINISH High quality, durable finish with zinc-plated hardware
SAFE USE INFORMATION Including rated load details and operating instructions
TWO-PIECE HANDLE & SOCKET Proven to be the most reliable and durable design
OFFROAD WINCHING
Don’t Settle for an Imitation.......The Difference is Quality!
The Hi-Lift Jack is a rugged, highly versatile jack that puts you in command of situations requiring lifting, pushing, pulling, winching, and clamping. Although light in weight and easy to maneuver, the Hi-Lift Jack offers a rated lifting capacity of 2 1/3 tons (2114.74kg).
HIL-LR-200LOC-RAC conveniently mounts and locks your Hi-Lift Jack.(includes lock)
HIL-4X4004XRAC mounting system for the serious off-roader.
HIL-FK-1FIX-IT-KIT contains all the key components for servicing all Hi-Lift models.
HIL-BL-250BUMPER LIFT designed to fit curved steel bumpers.
HIL-ORBOFF-ROAD-BASE alleviates jack sinkage on soft surfaces.
CAST & STEEL JACK
Available in 2 sizes and 2 types:
Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile & carbon .69 to .82
HIL-HK-B (black) HIL-HK-R (red) HANDLE KEEPER designed to slip over the Hi-Lift handle and the “I” beam to keep them both parallel and secured together when not in use.
HIL-LM-100LIFT MATE designed to provide a lift point from most wheels for quick and easy lifting
HI-LIFTPRODUCTLITERATURE
WIRELITERATUREHOLDER
GRAPHICSHEADERBOARD
P.O.P. DISPLAY
• Charcoal Metallic Powder-Coat Finish
• Gold Zinc-Coat Hardware
• Unique Winch-Clamp- Spreader Attachment
HI-LIFTEXTREME
HIL-TM700 HIL-TM750TUBE MOUNT Mount your Hi-Lift Jack to tube bumpers, bull bars etc.
HIL-NJCNEOPRENE JACK COVER Keep your Hi-Lift Jack’s lifting assembly protected from mud, dirt and road grime.
HIL-JP350JACK PROTECTOR Protect your Hi-Lift Jack from the elements with this weather-resistant soft case.
HI-LIFTCAST STEEL
48” HIL-HL48460” HIL-HL604
48” HIL-XT48560” HIL-XT605
WIRE DISPLAYSTANDHIL-JD-2
GENUINE WHOLESALE LEGENDARY SERVICE 236®
TELEPHONE: (604) 626-4100 ORDER DESK/HOT LINE: 1-888-919-8866
OFF ROADO
FF RO
AD
DON’T LEAVE HOME WITHOUT IT!
HANDLE-ALL
Includes:- a spade shovel,- a 5 pound sledge,- an axe- a pickaxe.
HIL-HA-500
The handle collapses and everything stores in a high visibility ballistic nylon bag.