araihelmet - northern.co.nzcreate an Arai shell. Each shell can take up to 27 steps and to build one...
1
Important Notice: Arai reserves the right to change models, specifications, colours, designs and sizes without prior notice. No rights may be obtained from this brochure. Please note that printed colours are never completely true to actual colours. Helmet colours shown are as accurate as possible, and are subject to limitations of the printing process. No part of this brochure may be produced without written permission from the publisher. Copyright ® Arai Helmet (Europe) BV 2015. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Five times inspected Each Arai helmet goes through five separate quality-control departments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05. Organic shape The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape for improved comfort, fit and to help minimize wind turbulence. Stronger outer shell, softer inner shell Arai uses a stronger outer shell to spread impact forces and a softer inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. Penetration tested All Arai helmets are penetration tested, (except Freeway-2, Penta, Astro-Light and VX-Pro Jr) although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Different outer shells Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for. Rounder, smoother, stronger shell The outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Handm Hand It can take u Washa ontrol Double Double Th flat d although not tratio test ether with st Penetr All Arai helm All Arai helm (except Free ired b Organ ni The organic c an Arai oute e a more natu u seals better l s and a ty tiple-densit S Strong Strong o outer s A Arai uses a s s softer inner shell hout our helmet Arai In This Arai hel ze outer ut her with Diff f fere Unlike e many e e shell for eac rials and ly fitted first Each Arai helmet goes through five separate quality-con departments: after the shell is made, after painting and completion, after assembly and two in-process inspectio ontrol d graphic ons. ons. the finest liner materials and the extensive ventilation And thanks to the perfect balance and weight distributi helmet, you hardly notice you are wearing an Arai. system. ion of the unnecessary resistance. You don’t want to decelerate yo more than necessary. That’s why all Arai vents and duc designed to break off during an impact. our helm cts are Important Notice: Arai reserves the right to change models, specifica colours. Helmet colours shown are as accurate as possible, and are subjec workmanship, and are serviceable only for the properly user for 5 years from date of first use, but no more tha from date of manufacture. s, specifica ly fitted fi an 7 year able interior m quality interior of any Arai helmet can be place, with mild soap and lukewarm water e easily Washa premium aned, in p aned, in p W The clea c clea European helmet standards. The Arai penet d with a 3kg test cone that strikes from a he helmet. tration te eight of uired by erformed on the h on the h e requ is pe 3m 3m shell to absorb remaining energy. The mult hell is made using a unique technology of co hell is made using a unique technology of co e densities in various areas as a single comp tiple-dens ombining ombining ponent. ter inner S inner sh S inner sh ee to five ponent. ee to five s soft EPS EPS thre met thre designs and sizes without prior notice. No rights may be obtained fr of the printing process. No part of t his brochure may be produced wi ch two-helmet sizes for most models. Togeth aped outer shells for different models it is a not to find the fit you are looking for. obtained fr her with almost designs an ll for eac erent sha possible n ct to limitations ations, colours, d first rs shel diffe imp up to five years for our experts to earn the right to rai shell. Each shell can take up to 27 steps and to build lmet will take about 18 man-hours. an take u ate an Ar e Arai hel e Arai hel It ca crea one one D-shaped rings fit smooth against the chin. No moving rrosion problems and just pulling the tab is enough to astener. e flat and rts, no cor sen the fa sen the fa The par loos est loos and conforms more ’s natural shape for improved and to help minimize wind turbulence. and to help minimize wind turbulence als better the head’ ’ s mfort, fit a a mfort, fit a seal to t com ty sit com re. Please note that printed colours are never completely true to actual ermission from the publisher. Copyright ® t t Arai Helmet (Europe) BV 2015. ® lmet is designed to meet the stringent Arai In-house quirements, in addition to mandatory standards such 5. re. Please s Arai hel ndard req ECE 22-05 ithout written pe rom this brochur This stan as E araihelmet.eu
Transcript of araihelmet - northern.co.nzcreate an Arai shell. Each shell can take up to 27 steps and to build one...
-
Important Notice: Arai reserves the right to change models, specifications, colours, designs and sizes without prior notice. No rights may be obtained from this brochure. Please note that printed colours are never completely true to actual
colours. Helmet colours shown are as accurate as possible, and are subject to limitations of the printing process. No part of this brochure may be produced without written permission from the publisher. Copyright® Arai Helmet (Europe) BV 2015.
5-year limited warrantyAll Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture.
All-day comfortAll-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai.
Washable interiorThe premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water
Double-D ring deviceThe flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener.
Five times inspectedEach Arai helmet goes through five separate quality-control departments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections.
HandmadeIt can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours.
Arai In-house testThis Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05.
Organic shapeThe organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape for improved comfort, fit and to help minimize wind turbulence.
Stronger
outer shell, softer inner shellArai uses a stronger outer shell to spread impact forces and a softer inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component.
Penetration testedAll Arai helmets are penetration tested, (except Freeway-2, Penta, Astro-Light and VX-Pro Jr) although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet.
Different outer shellsUnlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for.
Rounder, smoother, stronger shellThe outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact.
HandmaHandIt can take upWashabontrol
DoubleDoubleTh flat d
although not tratio test
gether with st
PenetrAll Arai helmeAll Arai helme(except Free
ired b
OrganiniThe organic c shan Arai outetea more natururseals betterer a
les and a
ity tiple-densit
StStrongStrong
ououter shArArai uses a stsosofter inner s
shellhout
your helmet
Arai In-This Arai helm
ze outer uther with
DifffffferenUnlikeke many kekeshell for each
rials and ly fitted first
Each Arai helmet goes through five separate quality-condepartments: after the shell is made, after painting andcompletion, after assembly and two in-process inspection
ontrol nd graphic ons.ons.
the finest liner materials and the extensive ventilation And thanks to the perfect balance and weight distributiohelmet, you hardly notice you are wearing an Arai.
system. ion of the
unnecessary resistance. You don’t want to decelerate youmore than necessary. That’s why all Arai vents and ductsdesigned to break off during an impact.
your helmet ucts are
Important Notice: Arai reserves the right to change models, specifica
colours. Helmet colours shown are as accurate as possible, and are subject
workmanship, and are serviceable only for the properlyuser for 5 years from date of first use, but no more thanfrom date of manufacture.
ls, specifica
ly fitted first an 7 years
able interiorm quality interior of any Arai helmet can beplace, with mild soap and lukewarm water
be easily Washab
e premium eaned, in pleaned, in pl
WaThe cleane
ic cleane
European helmet standards. The Arai penetred with a 3kg test cone that strikes from a hehelmet.
tration test height of
quired by performed
3m on the he3m on the hehe
requis per3m3m
shell to absorb remaining energy. The multishell is made using a unique technology of comshell is made using a unique technology of comve densities in various areas as a single compo
tiple-densitombining ombining
omponent.
fter inner sS inner shS inner shree to five omponent.ree to five
sosofterEPS EPS thre
lmet
thre
designs and sizes without prior notice. No rights may be obtained fr
of the printing process. No part of this brochure may be produced with
ch two-helmet sizes for most models. Togetheaped outer shells for different models it is a
not to find the fit you are looking for.
obtained fr
her with almost
designs and
ell for eachfferent shappossible n
fications, colours, de
bject to limitations of
fications, colours, de
first rs
sheldifferimpo
up to five years for our experts to earn the right to Arai shell. Each shell can take up to 27 steps and to build elmet will take about 18 man-hours.
an take upeate an Araie Arai helmee Arai helme
It cancreaone one
D-shaped rings fit smooth against the chin. No moving rrosion problems and just pulling the tab is enough to astener.
e flat and rts, no corr
osen the fasosen the fas
The partloos
test
loos
and conforms more d’s natural shape for improved
and to help minimize wind turbulence.and to help minimize wind turbulence
als betterer a the head’d’s mfort, fit ant anmfort, fit an
sealto thecomf
ity nsit
comf
hure. Please note that printed colours are never completely true to actual
permission from the publisher. Copyright®tt Arai Helmet (Europe) BV 2015.®
lmet is designed to meet the stringent Arai In-house equirements, in addition to mandatory standards such 05.
hure. Please n
is Arai helmandard req ECE 22-05
from this brochur
d without written per
from this brochur
Thisstanas E
� � � � � � � � � � � � � � araihelmet.eu
