Aquanova Scorpio Power Traverse User Guide
-
Upload
abacus-healthcare -
Category
Documents
-
view
221 -
download
1
description
Transcript of Aquanova Scorpio Power Traverse User Guide
Aquanova Scorpio (Power Traverse)Product Care & User Operating Instructions
Abacus Healthcare Services Ltd, Unit 1 Millennium Way, High Carr Business Park, Newcastle-under-Lyme, ST5 7XETel: 01782 569330 Fax: 01782 569349 Sales: 0800 454810 www.abacushealthcare.co.uk e-mail: [email protected]
Minimum rim height 605mmLift range (combined) 400mmFill volume 220 LitresTime to fill 4.0 min at 2 bar pressureTotal weight (including 80kg patient) 280kgElectric/hydraulic motor 300 WattElectrical 24 Volt DC battery/transformerMinimum dimensions (W x H x L) 750 x 580 x 1700mmMaximum dimensions (W x H x L) 750 x 980 x 1700mmInternal dimensions (rim) (W x D x L) 550 x 400 x 1500mmInternal dimensions (base) (W x D x L) 520 x 400 x 1480mmSafe working load (bath) 150kg
Technical Product Specification
Dimensions
1700mm
1500mm
750mm
400mm
605mm
1700mm 750mm
955mm
550mm
2
Fig. 1
AAbbaaccuuss HHeeaalltthhccaarree SSeerrvviiccee LLiimmiitteedd
COMMISSIONING CERTIFICATE
This is to confirm that the
Aquanova Leo Bath
Serial No: __________
at
______________________________________________________________________________
____________
has been commissioned on the __/__/____
the Guarantee expires on the __/__/____
Signed by: _____________________
Date: ________________________
Abacus Healthcare Services Ltd, Unit 1, Millennium Way, High Carr Business ParkNewcastle under Lyme, Staffordshire, ST5 7XE
Tel: 0870 770 8693 Fax: 0870 770 8698
email: [email protected]
3
Warranty
Our bath products are guaranteed for a period of twelve months from the date of commissioning.
All parts are covered against defects that may arise as the result of faulty materials, inferior workmanshipor construction.
The baths are not covered for any problems that may arise from the installation or site planning unlesscarried out by engineers from Abacus Healthcare Services Ltd.
Any consequence arising from unskilled or incorrect handling of the product is not covered by thisguarantee.
The following items, when supplied by Abacus Healthcare Services Ltd are guaranteed for a periodof twelve months from the date of supply for the parts only (labour costs are not covered).
• Taps and mixers
• Shower hoses, shower heads and shower brackets.
• Flexible pipes including waste outlet, hot and cold supply.
Hot and cold taps and mixer taps are proprietary fittings and as such carry a standard manufacturer’swarranty.
Note: Thermostatic mixing valves must be adjusted for the appropriate discharge temperature bythe installer. These require regular maintenance for which Abacus engineers are available.
• Electrical
All electrical components fitted to Aquanova baths are CE marked and comply with current EuropeanStandards.
Electrical items must not be replaced with alternative components without the authorisation of AbacusHealthcare Services Ltd.
Failure to obtain such authorisation will exempt the Company from any liability for further failure.
4
Safety Instructions
Always ensure the equipment is operated by trained staff.
Regularly clean the bath using non-abrasive cleaners.
Always ensure the mains electricity is switched on.
Always have the equipment serviced regularly (see Service Level Agreement).
Always keep users hands away from moving parts.
Always ensure the shower head is returned to its holder when not in use.
Never use the bath for any purpose other than that it has been designed.
Never leave the bath with the platform in a raised position.
Never allow other equipment such as hoists to contact the bath forcibly as this may cause damage.
Never allow items such as the shower head to remain beneath the platform when raising the bath.
Whirlpool use and safety
Ensure you have a minimum of 50mm of water above the highest jet before switching on the whirlpool.
Check, especially after children have used the bath, that small toys or other objects have not been pushedinto the jets or suction fitting.
Check regularly that all debris is cleared from around the suction fitting.
Ensure that adequate access is left for maintenance and servicing.
Do not switch on your whirlpool without any water in the bath: this will damage the whirlpool pump.
Do not use large amounts of standard bubble bath in the water since this will fill the room with soapbubbles.
Do not run unmixed hot water directly on to the suction fitting.
Do not let anything cover the suction fitting during use, especially you.
Do not try to put your finger in a jet whilst the whirlpool is working.
Do not leave children unattended in the bath with the whirlpool system switched on.
Do not wash your hair in a bath fitted with a whirlpool system when the system is operating.
Do not wash animals in a bath fitted with a whirlpool system.
Do not modify your whirlpool in any way. This could result in the system becoming dangerous and willinvalidate the guarantee.
Maintenance
After each use: Dissolve a sterilising tablet into the bath water prior to sending the water to waste.Clean the bath and fittings using a soft cloth and non abrasive cleaner with anti-bacterial agent.
Monthly: Whirlpool sanitisation using Abacus Healthcare approved cleaner.
Annually: Servicing by an approved company in accordance with the manufacturer’s instructions.
5
Operating Instructions
1. Close the pop up waste by rotating thechrome turn handle clockwise until the wasteplug locates in the outlet. (fig. 2).
2. Fill the bath with water to your required level.
3. Check the temperature of the water.
4. The bath may be used with a portable hoist ora ceiling track hoist in addition to the seat. Thebath may also be used as an ordinary variableheight bath with the seat outside the bath. (fig. 3).
A: Ambulant
B: Ceiling Track Hoist
C: Mobile/Portable Hoist
D: Wheelchair
5. Press and hold the button on the handset
to lower the bath to the lowest height (fig. 4).
6
Fig. 2
Fig. 4
A
B
C
D
Fig. 3
6. Raise the seat by pressing and holding thebutton on the handset, until the seat is at theappropriate height to transfer the bather.
7. Transfer the bather onto the seat (the armrestwill swivel up for easy access).
8. Raise the seat by pressing and holding the
button on the handset.
9. When the seat has reached the top of travel,release and re-press and hold the buttonagain and the
seat will traverse into the bathing position. (Youwill need to assist the bather to raise their legsabove the rim of the bath) (fig. 5).
10. When the seat has completed the traverse,
release and re-press and hold the button on
the handset and the seat and bather will lower
into the bath of water.
11. Press and hold the button on the
handset to raise the bath and seat to aconvenient working height for the Carer (fig. 6).
12. When bathing is completed press and holdthe button on the handset; the bath and seat
will lower to the lowest height (fig. 7).
13. When the bath and seat reach the lowestposition press and hold the button on the
handset. The seat will raise to its top height.
14. When the seat has reached the top height, release and re-press and hold the button onthe handset again. The seat will traverse to the position outside the bath.
15. When the seat has completed the traverserelease and re-press and hold the button onthe handset. Lower the seat to the height appropriate for the bather to transfer fromthe seat (fig. 8).
16. Assist the bather to transfer.
17. Empty the water from the bath and makeready for the next bath.
Operating Instructions (continued) Using Seat
7
Fig. 7
Fig. 6
Fig. 5
Fig. 8
Operating Instructions (continued) Without Seat
5b. Transfer the bather.
6b. Raise the bath, full of water, by pressing and
holding the icon on the handset controls.
7b. When bathing is completed lower the bath to
the position as in 4, for easy transfer (ambulant
or hoist) by pressing and holding the icon
on the handset controls on the bath rim (fig. 9).
8b. Allow/assist the bather to transfer out of thebath (see transfers - fig. 3).
9b. Assist to towel dry/dress the bather.
10b. Empty the bath using the pop up waste turning handle.
11b. Make the bath ready for the next bather (clean, disinfect etc).
8
Fig. 10
Fig. 9
9
Service Level Agreement
As the manufacturer of your bath we are able to offer a unique range of services, which, due to themodular construction of the bath will extend the working life of the bath and provide a cost effectivesolution to protect your investment by offering the prospect of upgrading your bath to the latestspecification.
Abacus Service Plans
There are three foundation plans, which may be added to or modified to personalise service cover to meetthe needs of the individual customer. All new equipment may take a four year contract from the warrantyexpiration date with a reduction in cost of ten percent provided continuity of cover is maintained.
Service contracts are established on an evergreen basis, renewed automatically to ensure thatmaintenance cover is always in place to comply with requirements. You will receive an invoice two monthsin advance of the renewal date. Written notice to terminate the contract is required one month prior to arenewal date.
Minimum CoverRecommended where: usage is relatively low and bathing facilities whilst important are not criticalon a daily basis.
Comprises:
• One full service visit each year which will include one LOLER weight test if appropriate.
• A further LOLER examination if appropriate at a six month interval from the service visit.
• All labour costs for the pre-planned service visit.
• All consumable parts costs for the pre-planned service visit.
• All travel to and from site for service visit.
• Discount of 10% on the list price of Engineer Call Out, Labour and Parts.
• Supply of a Certificate of Maintenance.
• Supply of LOLER Certificate where appropriate.
• Priority response to Contract Customers.
• Cover is availability: Monday – Friday 09:00 to 17:00 hours.
10
Minimum Plus Labour CoverRecommended where: usage is regular and may be significant to the daily bathing process.
Comprises:
• One full service visit each year which will include one LOLER weight test if appropriate.
• A further LOLER examination if appropriate at a six month interval from the service visit.
• All labour costs for the pre planned service visit.
• All consumable parts cost for the pre planned service visit.
• Unlimited breakdown cover for labour for service/repair visits.
• All travel to and from site for service visit.
• Discount of 10% on the list price of Engineer Call Out and Parts.
• Supply of a Certificate of Maintenance.
• Supply of LOLER Certificate where appropriate.
• Priority response to Contract Customers.
• Cover availability: Monday – Friday 09:00 to 17:00 hours.
Comprehensive CoverRecommended: Where the bath has regular multiple daily usage. Although it may not be the onlybathing facility its loss could compromise client or patient care.
Comprises:
• One full service visit each year which will include one LOLER weight test if appropriate.
• A further LOLER examination if appropriate at a six month interval from the service visit.
• All labour costs for the pre-planned service visit.
• All consumable parts costs for the pre-planned service visit.
• Unlimited breakdown cover for labour for service/repair visits.
• Unlimited breakdown cover for parts.
• Engineer call out.
• All travel to and from site for service visit.
• Supply of a Certificate of Maintenance.
• Supply of LOLER Certificate where appropriate.
• Priority response to Contract Customers.
• Cover availability: Friday 09:00 to 17:00 hours.
Note: Comprehensive Cover is available initially for new baths and baths in the guarantee period.Comprehensive Cover will be available for baths up to five years old Application for baths more than one year old will be subject to a service inspection prior toacceptance.Application for baths not installed by Abacus will be subject to a service inspection prior toacceptance.
14
Fault FindingS
ympt
om
The
bath
will
noto
pera
te
The
cont
rolb
utto
nsdo
notw
ork
The
seat
isst
uck
atth
eto
p
The
reis
aw
ater
leak
The
reis
ahy
drau
licoi
llea
k
Wat
erte
mpe
ratu
reva
riabl
e
*Tel
eph
on
e08
7077
086
93-
Ser
vice
Dep
artm
ent
The
bath
shel
lwill
notg
odo
wn
The
supp
lyto
the
batte
rych
arge
rha
sbe
enin
terr
upte
dC
heck
that
the
batte
rych
arge
rha
sno
tbee
nsw
itche
dof
f
Che
ckth
atth
eba
ttery
char
ger
has
notb
een
switc
hed
off
Che
ckth
atth
eba
ttery
char
ger
has
notb
een
switc
hed
off
Fol
low
proc
edur
efo
rch
ecki
ngth
eke
ypad
oper
atio
nab
ove
Fol
low
proc
edur
efo
rch
ecki
ngth
eke
ypad
oper
atio
nab
ove
Fol
low
proc
edur
efo
rch
ecki
ngth
eke
ypad
oper
atio
nab
ove
Fol
low
proc
edur
efo
rch
ecki
ngth
eke
ypad
oper
atio
nab
ove
Con
tact
Aba
cus
Hea
lthca
reS
ervi
ces
Ltd*
Con
tact
Aba
cus
Hea
lthca
reS
ervi
ces
Ltd*
Con
tact
Aba
cus
Hea
lthca
reS
ervi
ces
Ltd*
Con
tact
Aba
cus
Hea
lthca
reS
ervi
ces
Ltd*
Con
tact
Aba
cus
Hea
lthca
reS
ervi
ces
Ltd*
Con
tact
Aba
cus
Hea
lthca
reS
ervi
ces
Ltd*
Con
tact
Aba
cus
Hea
lthca
reS
ervi
ces
Ltd*
Con
tact
Aba
cus
Hea
lthca
reS
ervi
ces
Ltd*
Con
tact
Aba
cus
Hea
lthca
reS
ervi
ces
Ltd*
Che
ckw
ater
tem
pera
ture
byus
ing
ath
erm
omet
er
Che
ckth
esu
pply
flow
and
wat
erte
mpe
ratu
reus
ing
ath
erm
omet
er
Con
tact
Aba
cus
Hea
lthca
reS
ervi
ces
Ltd*
Con
tact
Aba
cus
Hea
lthca
reS
ervi
ces
Ltd*
Insp
ectt
heba
thsh
ellf
orda
mag
e-
ifth
eba
thha
sa
show
eran
dpl
atfo
rmlo
okfo
rsi
gns
oftr
appi
ng
Che
ckth
eor
igin
ofth
ew
ater
and
posi
tion
rela
tive
toth
eba
th
Che
ckth
esh
ower
dive
rtor
onth
eta
pan
dth
eco
nnec
tions
ofth
esh
ower
hose
/sho
wer
head
Con
tact
Aba
cus
Hea
lthca
reS
ervi
ces
Ltd*
Che
ckth
atth
eba
ttery
char
ger
has
notb
een
switc
hed
off
Che
ckth
atth
eke
ypad
has
notb
een
lock
edby
pres
sing
the
two
lock
ing
keys
sim
ulta
neou
sly
toun
lock
the
bath
-se
e
Pag
e5,
Fig
4.Tr
yto
rais
eth
eba
thag
ain
bypr
essi
ngth
eba
thra
isin
gic
on-
see
Pag
e7,
Poi
nt6
Fig
9.If
this
fails
repe
atth
ispr
oced
ure
once
mor
e.
The
batte
rych
arge
rha
sfa
iled
The
batte
ries
have
lost
thei
rch
arge
orha
vefa
iled
The
cont
rolb
oxha
sfa
iled
Par
toft
helif
ting
mec
hani
smha
sfa
iled
The
reis
abr
oken
elec
tric
alco
nnec
tion
inth
esy
stem
The
reis
abr
oken
mec
hani
calc
ompo
nent
inth
esy
stem
The
keyp
ad/a
irsw
itch/
pend
antc
ontr
olha
sfa
iled
The
keyp
ad/a
irsw
itch/
pend
antc
ontr
olha
sfa
iled
The
ram
/pum
pset
has
faile
d(s
eals
/loss
ofhy
drau
licflu
id)
The
pum
pm
otor
has
faile
d(b
urne
dou
t/con
tam
inat
ed
with
oil)
The
wat
ersu
pply
toth
eba
thha
sfa
iled
(dam
aged
brok
enpi
peor
conn
ectio
n)
Att
hesh
ower
this
may
beth
edi
vert
oror
conn
ectio
ns
hose
/han
dset
The
reis
ada
mag
ed/b
roke
npi
peor
conn
ectio
nin
the
hydr
aulic
syst
em
The
tem
pera
ture
cont
rolh
asfa
iled
(req
uire
dad
just
ing
/cle
anin
g/re
plac
ing)
The
keyp
ad/a
irsw
itch/
pend
antc
ontr
olha
sfa
iled
The
bath
shel
lmay
have
beco
me
deta
ched
from
the
uppe
rfr
ame
The
bath
isfit
ted
with
sing
leac
ting
scis
sor
liftr
ams
The
oils
eals
onth
ese
atra
mha
vebe
com
eda
mag
ed
The
reis
dam
age
onth
esc
isso
rlif
tram
s
The
hot/c
old
supp
lyha
sbe
enin
terr
upte
d
The
bath
shel
lis
dam
aged
The
liftin
gm
echa
nism
may
have
over
ridde
nth
elim
it
switc
hes
Pos
sibl
eC
ause
Fau
ltF
indi
ngP
roce
dure
Aries 1700 Aries 1800 Pisces
Gemini Leo Leo Plus
Scorpio Scorpio Plus Scorpio Fixed Height
Diana Ceiling Hoist Portable Hoist
Wash Hand BasinBalena Changing Bench
Abacus Healthcare Services Ltd, Unit 1 Millennium Way, High Carr Business Park, Newcastle-under-Lyme, ST5 7XETel: 01782 569330 Fax: 01782 569349 Sales: 0800 454810 www.abacushealthcare.co.uk e-mail: [email protected]
SBAQ25 Issue 02 - 28.03.11