Aqualung 2010
-
Upload
fuchsia-bucuresti -
Category
Documents
-
view
275 -
download
12
Transcript of Aqualung 2010
43.12 N 5.32 E
43.12 N 5.32 E
JO
UR
NE
Y
10
We make equipment for people to experience the fun and adventure of scuba diving.
AQUALUNG.COM
AQ
UA
LU
NG
2
010
EN
AL-CATA2010_couverture.indd 1 24/12/09 9:03:08
BY AQUA LUNGCOLORS
TRAVEL Compact and lightweight
equipment, without
sacrificing performance
and comfort
You will find products as:
• MIKRON
• ZUMA
• BALI
• MAHE
PHOTO Dedicated regulators,
help the shooting.
Freedom of the field of
vision.
You will find products as:
• KRONOS
• KRONOS SUPREME
• MISTRAL
CENTER Durable and easy to
service gears for intensive
use without relinquishing
performance or comfort
You will find products as:
• CALYPSO
• SAFAGA
• WAVE
You have special needs and requirements?
Aqua Lung has decided to help you on your choice. You will find on this new catalogue some colored logos,
they will help you to make an appropriated selection for your next diving gear.
AL-CATA2010_couverture.indd 2 24/12/09 9:03:10
We dive for the experience. From the planning and anticipation, to setting foot on the boat, to the first breath, to the beauty and discovery of the deep blue. It’s an experience we never stop thinking about. It’s our passion. It’s why we were the first to create diving equipment over sixty years ago. And it’s why we continue to be the world’s leading designer and manufacturer of dive gear – with unmatched innovation driven by the passion and love of diving.
JO
UR
NE
Y
10
GET ON BOARDTHE ADVENTURE STARTS WITH AQUA LUNG
1.0 REGULATORS
2.0 TANKS & VALVES
3.0 BOUYANCY COMPENSATORS
4.0 MASKS/SNORKELS/FINS
5.0 SUITS - BOOTS/GLOVES
6.0 BAGS
7.0 ACCESSORIES
8.0 SPECS
VENTURE HOW FAR WILL THE DIVE TAKE YOU?
JO
UR
NE
Y
09
4
PRODUCT GUIDE
LEGEND OCTOPUS
LEGEND GLACIA
LEGEND SUPREME
RE
GU
LA
TO
RS
1.0
The Legend Supreme is the cold water version of the Legend and can be identified by the “snowflake” laser-etched into the case. It is matched with the same Legend first stage as found on the other Legend models, and shares the same performance features as the Legend, plus the following:• Specifically adjusted to pass the
stringent European Standards for cold-water regulator performance.
• A mouthpiece lip shield for warmth in extreme cold.
• Built-in heat exchangers.
Designed for use under the most extreme conditions, the Legend Glacia offers greater resistance to freezing than any regulator Aqua Lung has ever produced. In addition, it boasts a breathing performance that is equivalent to that of a Legend Supreme.
The Legend Octopus is designed to keep your buddy safe and in luxury.• Pneumatically balanced second stage
provides consistent ease of inhalation at any tank pressure.
• Over-sized venturi lever is easy to reach and use during the dive, but is positioned to avoid entanglement.
• For Legend series.
1st stage: balanced diaphragm mechanism with dry chamber
Maximum service pressure: 300 bar DIN version - 232 bar yoke version
4 outlets MP 3/8 UNF
2 outlets HP 7/16 UNF
Medium Pressure LEGEND: 9.5 bar 6 0.5 bar
Medium Pressure LEGEND SUPREME: 8.5 bar 6 0.5 bar
Flow rate: 1500 l/min with HP = 200 bar
Body: made of brass with chrome
Protector: polyurethane
Removable crown, spring: stainless steel
Conical filter: bronze with nickel coating
O-ring: EPDM
2nd stage: Pneumatically balanced second stage
Cracking effort LEGEND: between 2.5 to 3.5 mbar
Cracking effort LEGEND SUPREME: between 3.3 to 4.3 mbar
Venturi effect tuning
Box bottom: made of A.B.S
Cover: Polyurethane
Mouthpiece, exhaust valve, seat, diaphragm: silicone
Adjustable crown: made of brass with chrome
MP hose: Length: 730 6 5 mm
Yoke Legend weight: 1285 g
DIN Legend weight: 1091 g
Yoke HP weight: 950 g
DIN HP weight: 756 g
2nd stage weight: 175 g
Certification: EN250 - 2000 regulator for cold water.
FEATURES
Breathing Performances:Work of breathing (average) W = 0, 74 J/litre at:RMV: 62.5 l/min, Depth: 50 m, HP = 50 bar.Work of breathing (average) W = 1,14 J/litre at:RMV: 62.5 l/min, Depth: 80 m, HP = 50 bar.
5
PRODUCT GUIDE
Our top performer. With simplified adjustments, the Legend™ regulator series incorporates a proprietary over-balanced diaphragm first stage design, coupled with a high performance balanced second stage.
The over-balanced first stage achieves unprecedented performance by compensating for the denser air at depth. The balanced adjustable second stage reduces breathing resistance to near zero with a lightweight balanced valve seat designed to respond instantaneously to the slightest inhalation.
The Legend regulator series is the best performing regulator Aqua Lung has ever offered.
LEGENDLEGEND
RE
GU
LA
TO
RS
1.0
ACD
Auto-Closure Device (ACD) seals the regulator’s inlet fitting, both Yoke and DIN, as soon as the regulator is removed from the cylinder valve.
• Keeps water and contaminants out of the regulator’s first stage. during rinsing and storage
• Allows the first stage to maintain peak performance over time.
• The first stage will retain its internal lubrication longer.
• Makes the first stage safer for nitrox use.
The new ACD feature coupled with the environmental dry chamber, results in a first stage that is completely sealed off from the environment.
ACD din
ACD yoke
6
PRODUCT GUIDE
RE
GU
LA
TO
RS
1.0
LEGEND LX SUPREMEThe Legend LX Supreme is the cold-water version of the Legend LX. It is designated by the “snowflake” which is laser-etched into the case, and by the silver accent ring on the front. It has all the same features as the Legend LX and the following cold water features:• Specifically adjusted to pass the
stringent European Standards for cold-water regulator performance.
• A mouthpiece lip shield for warmth in extreme cold.
• Built-in heat exchanger.
1st stage: balanced diaphragm mechanism with dry chamber
Maximum service pressure: 300 bar DIN version - 232 bar yoke version
4 outlets MP 3/8 UNF
2 outlets HP 7/16 UNF
Medium Pressure LEGEND LX: 9.5 bar 6 0.5 bar
Medium Pressure LEGEND LX SUPREME: 8.5 bar 6 0.5 bar
Flow rate: 1500 l/min with HP = 200 bar
Body: made of brass with chrome
Protector: polyurethane
Removable crown, spring: stainless steel
Conical filter: bronze with nickel coating
O-ring: EPDM
2nd stage: Pneumatically balanced second stage
Cracking effort LEGEND LX: between 2.5 to 3.5 mbar
Cracking effort LEGEND LX SUPREME: between 3.3 to 4.3 mbar
Venturi effect tuning
Box bottom: made of A.B.S
Cover: Polyurethane
Mouthpiece, exhaust valve, seat, diaphragm: silicone
Adjustable crown: made of brass with chrome
MP hose: Length: 730 6 5 mm
Yoke Legend weight: 1310 g
DIN Legend weight: 1116 g
Yoke HP weight: 950 g
DIN HP weight: 756 g
2nd stage weight: 200 g
Certification: EN250 - 2000 regulator for cold water.
FEATURES
Breathing Performances:Work of breathing (average) W = 0, 74 J/litre for:RMV: 62.5 l/min, Depth: 50 m, HP = 50 bar.Work of breathing (average) W = 1,14 J/litre for:RMV: 62.5 l/min, Depth: 80 m, HP = 50 bar.
7
PRODUCT GUIDE
RE
GU
LA
TO
RS
1.0
The Legend LX is our top of the line fully adjustable regulator complete with an Auto Closure Device (ACD) feature that seals the inlet fitting as soon as the regulator is removed from the cylinder valve.
• Environmental dry chamber creates a first stage that is completely sealed, keeping water and contaminants out of the regulator’s first stage.
• Pneumatically balanced second stage makes this a superior breather at all depths and conditions.
• User adjustment knob allows you to be in full control of breathing effort by adjusting for currents, depth or even surface swimming.
LEGEND LXLEGEND LX
8
PRODUCT GUIDE
RE
GU
LA
TO
RS
1.0
The Legend Glacia is the newest member of the Legend family of regulators. It has been designed for use under the most extreme conditions. The Legend Glacia offers a greater resistance to freezing than any regulator Aqua Lung has ever produced. In addition, it boasts a breathing performance that is equivalent to that of a Legend Supreme.
• The Legend Glacia is fitted with three heat exchangers:- The first completely surrounds the first
stage environmental dry chamber.- The second is fitted to the medium
pressure hose itself.- The third is in the traditional position
adjacent to the second stage casing.
LEGEND GLACIALEGEND GLACIA
9
PRODUCT GUIDE
RE
GU
LA
TO
RS
1.0
G
LACIA
GOES WITH:
INTRUDER p 75
BLIZZARD PRO p 75
WRECK REELS p 89
1st stage: balanced diaphragm mechanism with dry chamber
Maximum service pressure: 300 bar DIN version - 232 bar yoke version
4 outlets MP 3/8 UNF
2 outlets HP 7/16 UNF
Medium Pressure: 8.5 bar 6 0.5 bar
Flow rate: 1500 l/min with HP = 200 bar
Body made of brass with satin chrome
Protector: polyurethane
Removable crown, spring: stainless steel
Conical filter: bronze with nickel coating
O-ring: EPDM
2nd stage: Pneumatically balanced second stage
Cracking effort: between 3.3 to 4.3 mbar
Venturi effect tuning
Box bottom: made of A.B.S
Cover: Anodized Aluminium
Mouthpiece, exhaust valve, seat, diaphragm: silicone
Adjustable crown: made of brass with chrome
MP hose with thermal exchanger: Length: 730 6 5 mm
Yoke Legend Glacia weight: 1411 g
DIN Legend Glacia weight: 1217 g
Yoke HP weight: 955 g
DIN HP weight: 761 g
2nd stage weight: 236 g
Certification: EN250 - 2000 regulator for cold water.
FEATURES
Breathing Performances:Work of breathing (average)W = 0.94 J/litre for: RMV: 62.5 l/min, depth: 50 m, HP = 50 bar.
10
PRODUCT GUIDE
This beautifully redesigned Titan LX, while picking up exciting new features like Aqua Lung’s Auto-Closure Device (ACD), is actually lighter weight, making it travel friendly. The ease of breathing is rated superior on the ANSTI breathing machine. All this, along with an attractive mid-range price, makes the Titan LX a sure value.
The Supreme cold water version is resistant to freezing when diving in waters colder than 50°F / 10°C.
TITAN LXTITAN LX
RE
GU
LA
TO
RS
1.0
TITAN LX SUPREME
11
PRODUCT GUIDE
RE
GU
LA
TO
RS
1.0
TIT
AN LX GOES WITH:
PRO LT p 28
BALANCE COMFORT p 72
EXPRESS p 59
ICELAND COMFORT p 75
1st stage: In-line balanced diaphragm mechanism
Maximum service pressure: 300 bar DIN version - 232 bar yoke version
4 outlets MP 3/8 UNF
1 outlet HP 7/16 UNF
Medium Pressure Titan LX: 9.5 bar 6 0.5 bar
Medium Pressure Titan LX Supreme: 8.5 bar 6 0.5 bar
Flow rate: 1400 l/min with HP = 200 bar
Body made of brass with satin chrome
Removable crown, spring: stainless steel
Conical filter: bronze with nickel coating
O-ring: EPDM
2nd stage: pneumatically balanced second stage
Cracking effort Titan LX: between 2 to 4 mbar
Cracking effort Titan LX Supreme: between 3.3 to 4.3 mbar
Venturi effect tuning
Box bottom: made of A.B.S
Cover: Polyurethane
Mouthpiece, exhaust valve, seat, diaphragm: silicone
Adjustable crown: made of brass with chrome
MP hose: Length: 730 6 5 mm
Yoke Titan LX weight: 1105 g - Yoke Titan LX Supreme weight: 1191 g
DIN Titan LX weight: 965 g - DIN Titan LX Supreme weight: 1035 g
Yoke HP weight: 770 g - Yoke HP Supreme weight: 856 g
DIN HP weight: 630 g - DIN HP Supreme weight: 700 g
2nd stage weight: 175 g
Certification: EN250 - 2000 regulator for cold water.
FEATURES
Breathing Performances:Work of breathing (average) W = 0,74 J/litre at: RMV: 62.5 l/min, Depth: 50 m, HP = 50 bar. Work of breathing (average) W = 1,41 J/litre at: RMV: 62.5 l/min, Depth: 80 m, HP = 50 bar.
12
PRODUCT GUIDE
This third generation benefits from more than 10 years of experience. The new Titan is lighter, more compact and out performs it predecessors. In addition to offering a quick and easy MP hose connection, it allows for right or left hand configuration.
TITANTITAN
RE
GU
LA
TO
RS
1.0
10NEW FOR
TITAN SUPREME 10NEW FOR
13
PRODUCT GUIDE
1st stage: In-line balanced diaphragm mechanism
Maximum service pressure: 300 bar DIN version - 232 bar yoke version
4 outlets MP 3/8 UNF
1 outlet HP 7/16 UNF
Medium Pressure Titan: 9.5 bar 6 0.5 bar
Medium Pressure Titan Supreme: 9.5 bar 6 0.5 bar
Flow rate: 1400 l/min with HP = 200 bar
Body made of brass with satin chrome
Removable crown, spring: stainless steel
Conical filter: bronze with nickel coating
O-ring: EPDM
2nd stage: Downstream demand valve
Cracking effort Titan: between 2.5 to 4 mbar
Cracking effort Titan Supreme: between 2.5 to 4 mbar
Venturi effect tuning
No tool required to reach the internal second stage
Box bottom: made of A.B.S
Cover: Polyurethane
Mouthpiece, exhaust valve, seat, diaphragm: silicone
Adjustable crown: Technopolymer
MP hose: Length: 730 6 5 mm
Yoke Titan weight: 1109 g
DIN Titan weight: 969 g
Yoke HP weight: 770 g
DIN HP weight: 630 g
2nd stage weight: 179 g
Certification: EN250 - 2000 regulator for cold water
FEATURES
Breathing Performances:Work of breathing (average) W = 0,78 J/litre with:RMV: 62.5 l/min, Depth: 50 m, HP = 50 bar.Work of breathing (average) W = 1,41 J/litre with:RMV: 62.5 l/min, Depth: 80 m, HP = 50 bar.
RE
GU
LA
TO
RS
1.0
PRO LT p 28
BALANCE COMFORT p 72
SLINGSHOT p 57
LOOK 2 p 33
TIT
AN GOES WITH:
PHOTOGRAPHERSSHOOT THE SEA
15
PRODUCT GUIDE
MISTRAL
KRONOS
Designed with the photographer in mind, Kronos offers innovative solutions to common frustrations found with traditional regulators. The asymmetric Side-X exhaust system gets the bubbles out of your field of view, while fine-tuning is simplified by combining the venturi control with the breathing resistance knob into one Dual Cam controller.
This regulator, while offering a nostalgic appeal, incorporates all the developments and refinements of a modern regulator and allows today’s diving in complete safety. With its multiple MP and HP ports, the diver can connect the full range of peripheral elements: octopus, submersible pressure gauge, BC and dry suit inflators.The Mistral first stage can be supplied with either a 232 bar yoke fitting, a DIN 300 bar fitting or with Nitrox/O2 M26x2 to allow the full range of configuration.The Mistral, based on a well-known tried and tested Titan design, and will be easy to maintain in complete safety.
The Kronos Supreme is the coldwater version of the Kronos regulator above. It is ideally suited for water below 50°F / 10°C.
KRONOS SUPREME
RE
GU
LA
TO
RS
1.0
16
PRODUCT GUIDE
Travel light. Pack performance. The smallest and lightest weight regulator on the market today.
• Weighs in at just 26 oz. (din) and 31 oz. (yoke) for light-weight travel packing.
• Performance is not sacrificed by the regulator’s extreme compactness.
• Balanced first and second stages produce exceptional breathing performance.
• Compact size also makes the Mikron ideal for women and young adults.
MIKRONMIKRON
RE
GU
LA
TO
RS
1.0
MIKRON LADY
17
PRODUCT GUIDE
RE
GU
LA
TO
RS
1.0
M
IKRON GOES WITH: 1st Stage: Balanced diaphragm regulator
Working pressure: 300 bar DIN version - 232 bar yoke version
4 outlets MP 3/8 UNF
1 outlet HP 7/16 UNF
Medium Pressure: 9.5 bar 6 0.5 bar
Flow: 1450 l/min with HP = 200 bar
Body: Brass electroless nickel + chrome plating
Removal crown, spring: stainless steel
Flat filter: sintered bronze
O-ring: EPDM
2nd Stage: balanced demand valve
Cracking effort: 2.5 to 4 mbar
Cracking effort adjustment
Clipsable exhaust tee
Case, exhaust tee, adjustment knob: A.B.S
Front cover: Polyurethane
Mouthpiece, exhaust valve, diaphragm: silicon
Adjustable crown: Technopolymer
MP Hose: Length: 730 6 5 mm
Mikron yoke weight: 890 g
Mikron Din weight: 740 g
Yoke HP weight: 617 g
DIN HP weight: 467 g
2nd stage weight: 138 g
Certification: EN250 approved, water temperature > 10°C
Breathing Performances:Average Work of Breathing WoB = 1,1 J/litre, with a breathing rate equals to 62.5 l/min, at 50m deep and working pres-sure equals to 50 bars.
BALI & MAHE p 65 FEATURES
ZUMA p 36
PEARL p 35
BALANCE COMFORTp 73
18
PRODUCT GUIDE
CALYPSO NITROX
PARTNER The new Partenr second stage is lighter, more compact and so successful than these predecessors.It offers you in addition a simple and fast connection of the MP hose but also the possibility of using it right or left hand.Excellent choice for equipping redundant pony bottles or safety stop cylinders.
The Calypso O2 regulator has all the same features and benefits of the popular Calypso regulator, with the added bonus of being designed and built for use with breathing gasses containing oxygen percentages between 40 - 100%. The Calypso O2 is an excellent choice for technical divers in need of a shallow-water regulator capable of operating with a high O2 percentage.Assembled in a dedicated clean room to ensure suitability for higher oxygen percentage applications.
1st stage: unbalanced piston regulator
Maximum service pressure: 232 bar yoke version or Din version
4 outlets MP 3/8 UNF
1 outlet HP 7/16 UNF
Medium Pressure: 9.5 bar ± 0.5 bar with HP = 200bar
Flow rate: 1300 l/min with HP = 200 bar
Body made of brass with satin chrome
Removable crown, spring: Stainless steel
Conical filter: bronze with nickel coating
O-rings: EPDM
2nd stage: Downstream demand valve
Cracking effort: between 2,5 to 4 mbar
Venturi effect tuning
No tool required to reach the internal second stage
Box bottom: made of A.B.S
Cover: Polyurethane
Mouthpiece, Exhaust valve, seat, diaphragm: silicone
Adjustable crown: Technopolymer
MP hose: Length: 730 6 5 mm
Yoke Calypso weight: 970 g
Din Calypso weight: 739 g
Yoke first stage: 628 g
Din first stage: 397 g
2nd stage weight: 179 g
Nitrox Compatibility: 40 % O2 max. with yoke or Din version, 100 % O2 with EN 144-3 version
Certification: EN 250:2000 Regulator for cold water
FEATURES
Breathing Performances:Work of breathing (average) W = 1.2 J/litre for:RMV: 62.5 l/min, Depth: 50 m, HP = 50 bar.
RE
GU
LA
TO
RS
1.0
19
PRODUCT GUIDE
• In-line, high-flow piston design.• High-performance, mid-size 2nd stage.• Vane Adjustment Switch (VAS) controls
venturi assist to reduce sensitivity to freeflow on surface and provide maximum air flow at deeper depths.
• Enlarged oral breathing channel with Comfo-Bite™ mouthpiece.
• Now meets the CE requirements for cold water diving (<50º F).
• New bright chrome finish.
CALYPSOCALYPSO
RE
GU
LA
TO
RS
1.0
10NEW FOR
20
PRODUCT GUIDE
RE
GU
LA
TO
RS
1.0
MIKRON OCTOPUS
All the features of the regulator Mikron in an octopus. • Balanced octopus.• Light.• Yellow second stage. • NEW: AQUAFLEX hose.
OCTOPUS LX
Type: Balanced demand valve.• Mechanism: Down stream poppet.• Material: Silicone for mouthpiece,
diaphragm and exhaust valve – ABS for box bottom – Polyurethane for purge cover.
• Cold water: Yes.• Sensitivity adjustment: No.• Venturi adjustment: Yes.• Cracking effort: between 3,3 to
4,3.
ABS
Innovative, low profile design minimizes drag.• Unique 120˚ angle between hose
and mouthpiece is ideal for sharing air with your buddy.
• Includes high-visibility yellow, 39” hose.
• Custom, quick release mounting clip included.
• Single units come in display-ready clamshell packaging.
Mid-size octopus.• Vane Adjustment Switch (VAS)
controls venturi’s sensitivity to free flow on surface and provide maximum air flow at deeper depths.
• Enlarged oral breathing channel.
CALYPSO/TITAN OCTOPUS
10NEW FOR
21
PRODUCT GUIDE
RE
GU
LA
TO
RS
1.0
KRONOS OCTOPUS
The Kronos octopus is the perfect match for the Kronos regulator.• New asymmetrical Side-X exhaust system (pat. pend.) routes bubbles out of your viewing
area.• Exhaled breath passes over the second stage valve effectively warming it, thereby making it
resistant to freezing.• The venturi control and breathing resistance knob have been integrated into one Dual Cam
controller (pat. pend.). Divers can now achieve ideal settings with less to think about.• This pneumatically-balanced octopus is ideally suited for all high performance regulators
including over-balanced first stage.
LEGEND OCTOPUS
Mid-size octopus to complete Legend LX, Legend & Titan LX regulators.• This pneumatically balanced octopus is ideally suited for an over-balanced
Legend first stage.• The diver has full control of the venturi by means of a lever so as to prevent
accidental freeflow when the octopus is not being used.• The excellent cold water performance of this octopus is due to the highly
efficient heat exchanger on the second stage.• High visibility 39” yellow hose and high visibility yellow cover.
LEGEND GLACIA OCTOPUS
If your extreme cold diving requires the Legend Glacia regulator, then this is the complimentary octopus that you need.• Fitted with an aluminum cover machined from solid metal. The metal cover, apart from
assisting the heat exchange, accommodates a purge button with flow control.• Heat exchangers surrounding the valve and in the middle of the hose provide excellent freezing
resistance.• Heat exchanger fitted in middle of 39” yellow hose.• NEW: A user adjustment knob allows you to be in full control of breathing effort. You can
adjust for currents, depth or even surface swimming.
23
PRODUCT GUIDE
TA
NK
S &
VA
LV
ES
2.0
NITROX TANK
• Specially prepared in Aqua Lung’s workshops.
• In accordance with the project of the EN 144-3.
• Available in 6l 200 bar with Z valve, 10l 200 bar with Z valve and 12l 230 bar with T.A.G valve.
PRESSURE TEST GAUGE
• To check the pressure in the cylinder.
• Supplied with a screw purge.• Available with M26 x 2 ISO 300
bar (Nitrox/O2) connections.
VALVES
Z 230 bar Nitrox/O2 ValveAll the features of a Z valve but with a M26 x 2 ISO connection (In accordance with the project of the EN 144-3).
T.A.G. 230 bar 02/Nitrox valveAll the features of a TAG valve but with a M26 x 2 ISO connection (In accordance with the project of the EN 144-3).
24
PRODUCT GUIDE
TA
NK
S &
VA
LV
ES
2.0
AIR TANK
Aqua Lung tanks meet the EN250 standard as well as the new PED regulations that require manufacturers to certify a “tank-regulator” set. Tanks sold in France are required to meet this regulation.
VALVES
Z Valve: One outlet valve 230 bar• Progressive opening action conserves the HP
seat.• Soft handwheel absorbs shocks if the cylinder
falls over.• Hexagonal body makes removal for inspection
easier.• Z valve is available with M25x2 ISO or 3/4 NPSM
(with or without burst disc) thread. The 3/4 NPSM model is not available in France.
T.A.G. Valve: Patended 2 outlets • Assymetric heads for a perfect regulator
positioning.• Simple and easy hose management.• Progressive opening action for the HP seat to
last longer.• Soft handwheel absorbs shocks if the cylinder
falls over.• Hexagonal body makes removal for inspection
easier.
27
PRODUCT GUIDE
INS
TR
UM
EN
TS
2.0
MANO AL 50
TANK TESTING PRESSURE GAUGE
• HP pressure gauge AL50.• Luminous, easy-to-read
analog dials.• Reliable and accurate open
bourdon tube mechanism.
• The cylinder test pressure gauge. • Quick, easy way to check cylinder pressure.• Rubber protective cover.• Manual bleed screw.• Available in yoke, DIN and M26 Nitrox
connection for EEC.
ANALOG COMBO
A complete range of combo gauges2 elements in line:• 300 bars pressure gauge +
Depth gauge.• Rubber protective cover.• Available metric & imperial. 2 elements in line + 1 on back:• 300 bars pressure gauge +
Depth gauge.• Compass.• Rubber protective cover.• Available metric and imperial. •1 element in line + 1 on back:• 300 bars pressure gauge.• Compass.• Rubber protective cover.• Available metric and imperial.
RE
GU
LA
TO
RS
1.0
28
PRODUCT GUIDE
PRO LT
PRO QD i3
PRO QD The popular Pro QD BC, long considered the mainstay of the industry, acquired a new look and was updated with all the latest features including the patented SureLock™ II weight system.
This latest revision now represents the best collection of features on the market for a mid-range BC. Not only does it provide value but it also offers unsurpassed comfort and durability.
The Pro QD was the first BC to incorporate i3 technology. For years, the Pro QD has been extremely popular for novice and exert diver alike.
Now, with the addition of the i3 technology and a new fresh look, its popularity is sure to soar.
A new member of the “Pro” family for 2010 with a new backpack, additional features and upgraded cosmetics.It is a weight-integrated, jacket style.
Those that dive with Pro LT will benefit from the quality and knowledge that Aqua Lung has developed in BC design and construction over the last four decades.
The intuitive i3™ will change the way you dive forever. With this innovative technology, a lever helps you control your buoyancy. It’s that simple.It’s diving made easier — take control of yourself.
The Sea Quest i3™ is an innovative, new inflation system found exclusively in Sea Quest BCs.Its greatest asset is its simplicity and how intuitive it is to use. Move the lever up to inflate; down to deflate your jacket. What could be easier? What’s more, when dumping air from the BC, the i3 (patent pending) opens all of the Flat E-Valves at once. Gone are the days of deciding which valve to reach for based upon your orientation in the water.
SAFE: The i3 (patent pending) allows you to take control of your diving. Mastering buoyancy control is one of the most difficult skills to learn. The i3 not only makes the skill easier but eliminates potential out-of-control-ascents caused by a diver reaching for the wrong dump valve. The i3 also allows for rapid location and activation of the inflator to establish buoyancy at the surface in case of an emergency.
EASY: The i3 is simple and intuitive. Move the lever up to inflate; down to deflate your jacket.
CONVENIENT: Unlike a traditional inflator at the end of a floppy hose, the i3 never moves. It is stationary at the same location where your left hand normally rests. It is always in the right place at the right time.
RELIABLE: The i3 does not utilize pneumatics or hydraulics to activate the Flat E-Valves. Therefore, there is no possibility of failure due to leaks. Using push-rod technology, as found in aircraft, the design remains simple and robust.
FUN: The i3 is just plain fun to use.
FEATURES i3 TECHNOLOGY
BC
’s
3.0
Two large lobe pockets are secured with #10 zippers. These are larger and stronger than previous #5 zippers. Zipper pulls are easy to grasp with gloves
Features 6 stainless steeld-rings to attach accessories. The two upper d-rings are angled making them easy to attach items to
Includes attachment grommets for knife. Has a pass-thru grommet for a retractor
Adjustable waistband – new!
Depth compensation on waistband - compresses at depth along with your wetsuit
Lobe retaining D-rings allow you to hold lobe stationary with opposite hand while weight pockets are inserted
Large pull bobs on dump valves
Octo-pocket (patent pending) inside the right lobe
Traction Pad over-molded on to the pack cradle prevents tank slippage
Positioning strap allows you to set the Pro QD at the perfect height each time
FEATURES PRO QD
RE
GU
LA
TO
RS
1.0
29
PRODUCT GUIDE
Our highly acclaimed best seller. This full featured mid-range BC continues our tradition of quality and innovation, with an attention to detail that makes it the choice of serious divers.
• SureLock II™ integrated weight system.
• Swivel buckle system for unsurpassed fit.
• Outer bladder construction of Armorshield™ Cordura® for increased wear and fade resistance.
PRO QDPRO QD
SureLock II™ Weight System
The best mechanical weight release system just got better! You used to have to insert a tab into the slot engage, which could be challenging while wearing a mask and gloves. Now the pocket aligns itself using a rail system. Just insert pocket until it clicks. You don’t even have to look! The male portion of the mechanism auto-finds the female portion. Now with improved single pull release. Simple and secure.
BC
’s
3.0
30
PRODUCT GUIDE
This weight-integrated, jacket style BC is the latest addition to the highly successful family of “Pro” BCs.
Those that dive with Pro LT will benefit from the quality and knowledge that Aqua Lung and Sea Quest have developed in BC design and construction over the last four decades. It packs features, style and durability into an affordable package.
PRO LTPRO LT10NEW FOR
BC
’s
3.0
31
PRODUCT GUIDE
P
RO LT GOES WITH: Weight integration features the SureLock™II (patented) mechanical lock and release
mechanism. The weight pockets align themselves. Just insert the pocket until it “clicks”. A simple, single-pull release is all that is needed to jettison the weights in an emergency
A new, proprietary backpack has a built in traction pad to reduce tank slippage as well as a built in carrying handle
Two large lobe pockets are secured with heavy-duty zippers complete with zipper pull tabs
A scooped octo-pocket on the top front of the right lobe makes it easy to stow and deploy an octopus. The octopus remains visible and accessible throughout the dive
Some divers may find it useful to run their instruments behind the left lobe pocket and out the
scooped instrument pocket on the top front of the left lobe
Features 4 stainless steel flat d-rings to attach accessories.
Includes attachment grommets for knife
The Pro LT has an adjustable waistband to accommodate varying waistlines
Positioning strap allows you to set the Pro LT at the perfect height each time
Right shoulder pull dump
Lower right dump for head down orientation
Chest strap for added security
2 non-ditchable weight pockets on tank band
Optional accessories include the Airsource, Squeeze lock knife and reflector kit
Type of BC: ADV style, weight-integrated, wrap-around jacket
Type of Fabrics: Outer bladder is fade resistant 500D Armor™ Cordura®. Inner bladder is 420D urethane coated nylon assorted fade resistant polyesters and mesh
Ditchable Weight: XS – ML hold up to 20 lbs. (9kg) - L & XL hold up to 32 lbs. (14.5 kg)
Non-ditchable Trim Weight: All sizes hold up to 10 lbs. / 4.5 kg of weight in two pockets on rear tank band
Lift Capacity (Lbs/N): XS-24/100, SM-27/120, MD-29/120, ML-33/140, LG-44/190, XL-55/240
Colors: Black / Charcoal / Red
FEATURES
TITAN p 12
BALANCE COMFORTp 72
EXPRESS p 59
LOOK 2 p 55
BC
’s
3.0
New backpack Pocket Octo-pocket
32
PRODUCT GUIDE
Top-of-the-line and with the latest technology, the Pro QD i3™ will change the way you dive forever. Its innovative design includes a one-touch lever that helps you simply and safely control your buoyancy.
• Upper and lower Flat E-Valves keep the BC streamlined while offering effective and responsive air dumping.
• SureLock™ II mechanical weight release system (patented) offers unsurpassed ease of loading, ditching and security of weight pouches.
BC
’s
3.0
PRO QD i3PRO QD i3
33
PRODUCT GUIDE
BC
’s
3.0
PRO
Q
D & i3
GOES WITH:Integrated i3 (patent pending) technology for safer and easier control of inflation and deflation
One upper and one lower Flat E-Valve keeps the BC streamlined while offering effective and responsive air dumping
One-way valves prevent water from back flushing into the BC, greatly reducing captured water
The oral inflator is easy to deploy and use. It can easily be removed to provide a access port should you ever need to rinse the inside of your BC
SURELOCK™ mechanical weight release system (patented) offers unsurpassed ease of loading, ditching and security of weight pouches
Two lobe-retaining D-rings that can be held to steady the lobe for easy weight pouch insertion
Two 10lb weight pockets on sizes XS – ML. Two 16lb weight pockets on sizes L - XXL
Two, side-release non-ditch pockets (except size extra small) increase overall weight carrying capacity as well as provide proper trim in the water
A new, integrated Octo-pocket (patent pending), is a convenient way to secure your octopus
A three-dimensional expanding gusset around the backpackTM provides increased lift capacity
Outer bladder constructed of Armorshield™ Cordura® for increase wear and fade resistance
Sculpted shoulders using the exlcusive Sea Quest swivel buckle systemTM provides unsurpassed fit and comfort
Traction pad (patented) built into the proprietary contour back pack prevents cylinder slippage
Over-molded carrying handle makes carrying the BC a breeze. Standard on all sizes
Upper, right-hand, shoulder pull dump as an alternative dumping method
Six stainless steel D-rings to attach all of your accessories
Two large zipper utility pockets with pull cord are easy to open / close
Knife grommets on left lobe accommodate any one of the fine Deep See knives
Depth compensating waistband with 11/2 inch buckle and lobe strap
FEATURES PRO QD i3
TITAN LX p 10 BALANCE COMFORTp 72
EXPRESS p 59
LOOK 2 p 55
Intuitive design makes buoyancy control safer and easier
Opens upper and lower dump valves simultaneously. No more thinking about which dump valve to reach for
Over-molded lever prevents gloves from slipping off while using
Increased flow rate over traditional inflators. Allows you to fill your BC faster
Attached dust cap prevents contaminants from entering mechanism when not in use
The i3 uses fewer parts and is easier to service compared to
standard inflators
Using the new LP hose grip, the LP hose can be attached or removed while wearing the BC. This will satisfy instructional
agency requirements to disconnect and reattach LP hose while training
i3 TECHNOLOGY
34
PRODUCT GUIDE
PEARL i3
PEARL
Our mid-level women’s BC is for real divers. The Pearl offers an adjustable waist band and a wide adjusting shoulder strap that allows you to fine-tune the fit to your body. It incorporates a plush back lining and Aqua Lung’s customary sports bra for added comfort and stability.
• Features the new patented SureLock™ II mechanical weight release system.
• Hybrid air cell combining the best features of a jacket style and a back inflation unit.
• Sleek, low profile lobes with scalloped lower edges to rise above the hips.
• Flat E-Valves reduce drag and keep the BC streamlined while one-way valves designed to keep water out.
The Pearl i3 is best ladies BC ever built by Aqua Lung. It features an all new air cell powered by Aqua Lung’s revolutionary i3 technology.
The hybrid air cell combines a jacket style with a back inflation unit that completely surrounds the backpack.
The front lobes are sleeker and low profile. The Pearl i3 retains Aqua Lung’s most notable BC features such as the integrated sports bra and SureLock™ II weight system.
BC
’s
3.0
35
PRODUCT GUIDE
BC
’s
3.0
The Wave and Wave Jr. BCs have been completely redesigned for 2010. While they still retain their rugged, fade resistant materials, they have been refreshed with exciting new cosmetics and additional features.
10NEW FOR WAVEWAVE
36
PRODUCT GUIDE
BC
’s
3.0
Here’s the BC that you have been waiting for. The fun, travel-friendly ZUMA will find favor with those divers who are tired of paying excess baggage fees.
This ultra-light, weight-integrated, back inflation BC has everything you need, yet lacks weight and bulk.
Once you lift it, you’ll feel for yourself that a size ML/LG weighs less than 2 kg (4.4 lbs), with the airway and weight pockets included!
ZUMAZUMA10NEW FOR
37
PRODUCT GUIDE
BC
’s
3.0
ZUMA GOES WITH: Extremely lightweight
Size ML/LG weighs less than 2 kg (4.4 lbs)
Great packability – flat or rolled
Weight integration features the SureLock™II (patented) mechanical lock and release mechanism. The weight pockets align themselves. Just insert the pocket until it “clicks”. A simple, single-pull
release is all that is needed to jettison the weights in an emergency.
Innovative tank support system eliminates the need for a hard pack
Lower tank band aligns with waist band
A valve strap pulls the top of the cylinder in towards your center of gravity. This relieves the shoulders and transfers the load to the hips
Only 4 sizes are all that’s needed to cover from XXS to XXL
Adjustable chest strap
The two buckles ride on a rail system allowing the strap to be raised or lowered.
Proprietary flat e-valves mean less bulk
Fold-down, easy-access pocket
Features 4 D-rings to attach accessories.
Includes attachment grommets for knife
Right shoulder pull dump
Lower right pull dump
Sculpted padded shoulders
Padded spine and lumbar support
Optional non-ditch weight pockets that mount on the tank band
Other options include the Airsource, Squeeze lock knife and reflector kit
Type of BC: Light weight, weight-integrated, back-inflation unit
Type of Fabrics: Air cell is made of 200D nylon.
Ditchable Weight: All sizes hold up to 20 lbs. (9kg)
Non-ditchable Trim Weight: Each pocket holds up to 5 lbs. / 2.25 kg of weight
Lift Capacity (Lbs/N): XXS/XS – 22/90, SM/MD-22/90, ML/LG-34/150, XL/XXL-34/150
BALI & MAHE p 65 FEATURES
MIKRON p 16
BALI & MAHE p 65
ZUMA BLUE
E-valve Pocket SureLock II
39
PRODUCT GUIDE
BALANCE
BLACK DIAMOND
Our technical do-it-all back inflation BC is designed for the serious diver. This rugged BC will take you over the edge while providing comfort for daily diving.
• Constructed of rugged 840 denier nylon.
• 5 large stainless steel D-ring attachment points (4 on size small).
• Vertical adjustment chest strap to compensate for drysuit valves.
(Shown with optional Air Source)
Experience the unrestricted freedom of back inflation with the Balance BC.
• Revolutionary triangular load distribution system in the shoulder strap, • offering exceptional comfort both underwater and on land.
• Rear bladder with patented harness system for exceptional support • and load distribution.
• Also available in Libra – designed specifically for women.
(Shown with optional Air Source)
BC
’s
3.0
EQUIPPEDEXPLORE WITH CONFIDENCE
43
PRODUCT GUIDE
MA
SK
S
4.0
LOOK - LOOK 2TEKNIKA
FAVOLAMICROMASK
See the world clearly with the new Look 2 mask.
• Easy pop-and-swap optical lens system.
• Available in two sizes for a custom fit.
• Great visibility.
This solid, robust mask was created with technical divers in mind.
• Outer frame made of shock absorbent techno-polymer.
• Folds down flat to fit into BC pockets.
With lenses that are positioned at an incline, this mask provides a wide angle of view upwards and downwards to make for an incredible field of vision.
• Cardanic joint buckles (double joint buckles) rotate both up-and-down and in-and-out to provide maximum adaptability and comfort for any head shape.
The Micromask is a revolution in mask design. Its innovative structure allows the lenses to fit seamlessly into your field of vision, while its patented cardanic double joint buckles rotate both up-and-down and in-and-out to provide maximum adaptability and comfort.
Lightweight single lens mask. • Wide field of vision.• Fast and simple strap adjustment
system.• Hypoallergenic silicone skirt.• Tempered glass.
This 4-window close-to-the-eye frame design produces a mask with a low profile and an excellent view upwards and downwards.
• Side lens is made of an optical quality polymer and offers brighter vision.
• Cardanic joint buckles (double joint buckles) rotate both up-and-down and in-and-out to provide maximum adaptability and comfort for any head shape.
• Quick counterposed push button activation is easy to use even when wearing gloves.
VENTURAINFINITY
44
PRODUCT GUIDE
CARAVELLE
Cost-conscience lightweight full-foot pocket fin that packs a lot of power.Made from thermoplastic material and provides extraordinary elasticity.The adjustable version is an excellent entry level and all around fin.
• Flexible, lightweight blade provides an easy kick with ample power.
• Anatomically shaped foot pockets enhance comfort and performance.
• Extended heel pocket for additional support and power transmission.
BLADES 2 FLEX
This time-proven blade design features a unique blend of materials for increased flexibility and performance.
• Anatomically shaped foot pocket enhances comfort and performance.
• Extended heel pocket for additional support and power transmission.
SLINGSHOT
Introducing the fin of the future. The innovative Slingshot has been engineered for effortless power and speed with unmatched comfort. • Mid-Foot Flex Joint: transfers the power from your entire leg to the
blade relieving pressure from your toes and ankles.• Power Bands: releases energy with each stroke, adding power and
momentum to your kick with less effort.• Three-Speed Gear Shift: customizes your speed-to-effort ratio to fit your
specific dive conditions.
FIN
S
4.0
45
PRODUCT GUIDE
FIN
S
4.0
STRATOS
Our classic full foot fin is excellent for snorkeling and scuba in warm water where booties are not needed.
• Combination of polymer plastic for stability and rubber for flexibility.
• Produces maximum thrust and lateral stability.
EXPRESS
Using Slingshot technology, the elastic rubberized zone at the toe allows the fin’s blade to bend to the optimum angle and obtain positive thrust from the complete surface of the blade.
• Once loaded with energy on the power stroke, it will release the energy prior to the upstroke to provide an added boost of power.
• Innovation that makes diving more comfortable, efficient and fun.
47
PRODUCT GUIDE
IMPULSE 3
The reference in snorkel design.
• Innovative two-valve system.
• Upper annular valve directs most of the water out before it even reaches the mouthpiece.
• Patented and replacable Comfo-bite • mouthpieces eliminate jaw fatigue.
MIX JUNIOR
For the kids
• Color: blue.
AIR PURGE DRY
Large bore curved snorkel• Vent system over the tube reduces
water splash-in.• Lower reservoir with two purge
valves.• Flexothane tube is supple yet
resistant.• Quick and simple mask keeper.• Comfo-bite silicone mouthpiece.
Innovative structure, completely in silicone! • The single-piece silicone body
rotates at the hose joint, allowing positioning to be optimised.
• Fitted with a “Comfo Bite” orthondontic mouthpiece.
• Double exhaust valve for an easy discharge
BURAN
SN
OR
KE
LS
4.0
DISCOVERSOMETHING DEEPER
51
PRODUCT GUIDE
BALI & MAHEBALI & MAHE10NEW FOR
3.5mm One-piece without hood• New V Lycra collar for more comfort.• Back zip.• Velcro zip tab.• Wrist seals in “glideskin” neoprene for easier dressing.• Twin needle flat stitch.
3.5mm Shorty
SU
ITS
5.0
SU
ITS
6.0
SKIN SUIT
Undersuit in 1mm neoprene• Interior in Glideskin Titanium.
SHARM
5.5mm 1 piece suit• Ankle zips.• Knee protectors.
KIDS
FLIPPER
5.5mm 2 piece suit• Ankle zips.• Knee protectors.
52
PRODUCT GUIDE
SU
ITS
5.0
55
PRODUCT GUIDE
HUDSON
BERING
One-piece 6.5mm suit with hood• Ultrastrech neoprene.• Ergonomic easy neck closure has 3 Velcro fasteners for more
comfortable head movement.• Comfort panels at joints in ultra-stretch 5.5mm neoprene.• Self-purging hood.• Ankles, cuffs and face in “glideskin” limit water entry, tear-resistant.• Personalised knee protectors.• “G lock” closure limits water entry.• Can be used with Balance Comfort 5.5mm over-vest.
2-piece 7mm suit• Jacket with integral zip. • Plush comfort red interior. • Ergonomic easy neck closure for more
comfortable head movement. • Longjohn upper part in 5.5mm
neoprene.• Comfort panels at joints in ultra-stretch
3mm neoprene.• Cuffs in “glideskin” limit water entry,
tear-resistant.• Knee protectors. • Pre-shaped hood
SU
ITS
5.0
56
PRODUCT GUIDE
SU
ITS
5.0
BORA BORA
JACKET SAFAGA
SHARM FULL SUIT
A 5.5mm over vest with hood.• Pressure resistant type L
neoprene • Wear and UV resistance jersey
polyester • Front zip• Cuffs in “Glideskin”, limit entry
water
4mm Shorty• Completely reversible suit –
End of the drag to put the right way round.
• Front zip with a reversible slider.
• Twin needle flat stitch.
A 6mm one piece suit with 100% high density neoprene suit.• Pressure resistant type L
neoprene • Wear and UV resistance jersey
polyester • Front zip• Cuffs in “Glideskin”, limit entry
water
SA
GAGA GOES WITH:
CALYPSO p 19
WAVE p 32
LOOK 2 p 55
57
PRODUCT GUIDE
SU
ITS
5.0
Modular suit comprising a 5.5mm, 6.5mm (SHARM II) or 7mm one-piece, an over vest (5.5mm) with hood and a Bora Bora shorty (used as an over vest with a sepa-rate hood).
ONE PIECE SUITS:• 5.5 or 7mm one pieces suit without hood.• Back zip.• Cuffs in “glideskin” limit water entry.• Clip for attaching hood pre and post-dive
on right thigh.
OVER-VEST:• 5.5mm shorty over-vest with hood or the
Bora Bora over vest without hood.• 5.5mm Separate hood.
SAFAGASAFAGA10NEW FOR
SEPARATE 5.5 HO
OD
58
PRODUCT GUIDE
SU
ITS
5.0
JACKET WITH HOOD
JACKET WITHOUT HOOD
FULL SUIT
Over vest:5.5mm over vest without hood in Ultrastrech neoprene.
Over vest:• 5.5mm Shorty without hood
or 5mm shorty with attached hood.
• Ultra-soft 3mm neoprene crotch comfort panel.
Separate 5.5mm hood:With smooth bib and face seal and comfort panel on the neck.
One piece suit:5.5 or 7mm one pieces suit with-out hood, back “Glock” closure .
Double seals on wrists and ankles, composed with a 2,5 mm ultra-strech “glideskin” and a 3,5mm (5.5 mm one piece suit) or 4.5 mm (7 mm one piece suit) with a zip closure.
Ultra-soft 5mm neoprene flex panels at the arms.
BALANCEBALANCEPRO LT p 28
TITAN p 72
SLINGSHOT p 57
LOOK 2 p 33
BA
LA
NC
E C
OM
FORT GOES WITH:
LOOK 2 p 33
MIKRON p 16
EXPRESS p 59
PEARL i3 p 35
59
PRODUCT GUIDE
SU
ITS
5.0
Modular suit comprising a 5.5 mm or 7 mm one-piece, an over vest (7mm) with or without hood and a separate hood. All in Ultrastrech Neoprene.
One piece suit:5.5 or 7mm one pieces suit without hood, back “G lock” closure.
Double seals on wrists and ankles, composed with a 2,5 mm ultra-strech “glideskin” and a 3.5mm (5.5 mm one piece suit) or 4.5 mm (7 mm one piece suit) with a zip closure.
Ultra-soft 5mm neoprene flex panels at the arms.
SEPARATE 5.5 HO
OD
COMFORTCOMFORT
60
PRODUCT GUIDE
BLIZZARD
BLIZZARD PROINTRUDER
7mm neoprene, includes separate hood.SPORTS DIVING DRY SUIT.
• Swivel inflator, manual and automatic purge on the left arm.
• 4mm ultra soft boots with soles in reinforced with vulcanised rubber.
• Double smoothkskin cuffs 4mm “glideskin” neoprene.
• Clip for attaching hood pre and postdive.• Waterproof metal YKK zip, protected by
a cover.• Supplied with carrying bag.
Yamamoto compressed 4mm neoprene, includes separate hood• Swivel inflator, manual and automatic
purge on the left arm.• Reinforced boots.• Sleeves fitted with latex cuffs, protected
by a neoprene cuff. • Latex neck seal, protected by a neoprene
collar.• Technical knee protectors.• Clip for attaching hood pre and postdive.• Supplied with carrying bag.• Waterproof metal YKK zip.• Internal straps facilitating wearing of the
suit before the dive.
• Front zip• Compressed 3 mm neoprene.• Internal straps facilitating wearing of
the suit before the dive.• High resistance kevlar knee pad.• Multiple pockets. • Separated hood.• Latex neck seal.• Automatic low profile purge.
SU
ITS
5.0
61
PRODUCT GUIDE
Semi-dry 7mm suit, separated hood
• Plush comfort red interior.• Comfort panels at joints in ultra-stretch 7mm neoprene.• Self-purging hood with smooth-skin around the face.• Ankles, cuffs and face in 5mm “glideskin” limit water
entry, tear-resistant.• Pocket on right leg with clip for attaching hood pre and
post-dive.• Waterproof plastic Tizip zip, protected by a cover.
ICELAND
Semy-dry 7mm suit with attached hood
• Plush comfort red interior• Comfort panels at joints in ultra-stretch
7mm neoprene• Self-purging hood.• Ankles, cuffs and face in 5mm “glideskin”
limit water entry, and is tear-resistant.• Pocket on right leg.• Waterproof metal YKK zip, protected by
a cover.
SU
ITS
5.0
ICELAND COMFORT
63
PRODUCT GUIDE
SU
ITS
5.0
RASHGUARDS
Remember the fun not the burn. • 50+ UPF (SPF) rating.• Lycra blend of 80% nylon / 20% spandex.• All available in long or short sleeve.
UNDER-SUITS ARCTIC 100 & 300
• 60% nylon - 40% polyester.• Padding: 3M Thinsulate.• Lining: 100% nylon.• Made from Thinsulate to avoid heat loss.• Lined interior.• Ventilation grilles at armholes.• Front zip.• Elastic arms and legs.• Unisex.• Ideal for wearing under a high volume dry suit.
TITANIUM
Shorty in 2mm neoprene • Inside lined with
Titanium glideskin. • Used with a dry or wet
suit. • Unisex suit.
65
PRODUCT GUIDE
BO
OT
S &
GLO
VE
S
5.0
Available in 5mm or 6.5mm.
• Flexible vulcanised rubber sole with 8mm inside for comfort.
• Flexible rubber toe & heel caps guard against abrasion.
• Plush linning.
• Built in strap stop.
POLAR
THERMOCLINEPOLYSUEDE KAI
An ergonomically designed glove that has pre-curved fingers that help minimize hand fatigue.
• Available in 3 or 5mm standard neoprene.
• Rubberized coating on palm for durability & added grip.
• Adjustable cinch closure at wrist for a secure fit.
2mm ultra stretch neoprene for exceptional comfort.
• Reinforced polysuede palm.
• Molded pull-on entry tab.
BOOTS
3mm boots.
DRY COMFORT
Dry gloves 4mm.
66
PRODUCT GUIDE
BA
GS
6.0
10NEW FOR
TRAVELER DRY
• Bag made with tarpolin.• Dim.: 85 cm x 35 cm x 45 cm.• Volume: 130 litres.• 2 handles and shoulder strap.• 2 screwed valves.• U-shape for the opening.
CLASSIC BAG
• PVC coated 1200 Decitex Nylon.• Measurements: 78 cm x 40 cm x 35 cm.• Weight: 2 kg.• Volume: 95 litres.• Two carrying handles and shoulder
strap.• One exterior pocket.• One fin pocket.
TRAVELER 70-REGULATOR BAG
• Dimensions: 35 cm x 25 cm x 10 cm.• Capacity: 9 liters. • Total Weight: 0.2 kg.• 840D & 600D nylon and foam padding.• Padded carry handle.• Interior mesh O-ring/tool pocket.• 2 Velcro loops for securing instruments
in place.
67
PRODUCT GUIDE
BA
GS
6.0
TRAVELER 1600 TRAVELER 1550 TRAVELER 850
• Dimensions: 48 cm x 78 cm x 40 cm.• Capacity: 147 liters.• Total Weight: 4.7 kg.• 840D & 600D nylon. • Lightweight corrugated board construction.• Lightweight aluminum extendable handle. • Smooth rolling ball-bearing wheels.• Zippered pocket for hide-away padded
backpack straps.• Padded top and side carry handles.• Molded plastic bottom handle.• Internal fin pockets.• External ID pocket.• Custom molded zipper pulls. • Internal compression straps.• Removable accessory bag strap.
• Dimensions: 48 cm x 78 cm x 30 cm.• Capacity: 116 liters.• Total Weight: 4.4 kg.• Meets max. checked luggage size for most airlines.• 840D & 600D nylon. • Lightweight corrugated board construction.• Lightweight aluminum extendable handle.• Smooth rolling ball-bearing wheelsy.• Zippered pocket for hide-away padded
backpack straps.• Padded top and side carry handles.• Molded plastic bottom handle.• Internal fin pockets.• Removable accessory bag strap. • External ID pocket.• Internal compression straps.• Custom molded zipper pulls.
• Dimensions: 35 cm x 78 cm x 35 cm.• Capacity: 100 liters.• Total Weight: 3.7 kg.• 840D & 600D nylon. • Lightweight corrugated board
construction.• Smooth rolling ball-bearing wheels.• Velcro closure duffle handle.• Molded plastic bottom handle.• Internal fin pockets.• External ID pocket.• Custom molded zipper pulls.• Lightweight aluminum extendable
handle.
10NEW FOR 10NEW FOR 10NEW FOR
69
PRODUCT GUIDE
BA
GS
6.0
10NEW FOR
TRAVELER 250
• Dimensions: 36 cm x 71 cm x 38 cm.• Capacity: 81 liters.• Total Weight: 0.5 kg.• 840D & 600D nylon and PVC-free nylon mesh. • Ergonomic adjustable padded backpack straps with
integrated top carry handle.• Full length side zipper entry.• Internal zippered accessory pocket.• External zippered bellows pocket.• Dual cinch closure top with a top flap.• Mesh/nylon hybrid bottom for drainage away from clothing.
TRAVELER 450
• Dimensions: 33 cm x 76 cm x 30 cm.• Capacity: 77 liters.• Total Weight: 1.0 kg. • 840D & 600D nylon.• Adjustable padded backpack straps.• Velcro closure duffle handle.• Internal compression straps for fins.• D-rings for optional shoulder strap (sold separately). • Dive gear check list.• Zippered external accessory pocket.• Padded end carry handles.• Zippered end pocket with mesh vents that fits the Traveler 70
Regulator Bag.• Padded bottom with drain grommets.
TRAVELER 350
• Dimensions: 33 cm x 66 cm x 33 cm.• Capacity: 72 liters.• Total Weight: 0.4 kg.• 840D & 600D nylon and PVC-free nylon mesh.• D-rings for optional shoulder strap (sold separately).• External zippered accessory pocket.• Velcro closure duffle handle.
TRAVELER 100
• Dimensions: 31 cm x 43 cm x 16 cm.• Capacity: 23 liters.• Total Weight: 0.6 kg.• 840D & 600D nylon.• Zippered plush lined sunglass/mp3 player pocket.• Internal laptop pocket with Velcro securing strap.• Internal document pocket.• Ergonomic adjustable padded backpack straps
with integrated top carry handle.• Mesh water bottle pocket.• External zippered accessory pocket.• Breathable mesh back panel.
10NEW FOR
10NEW FOR
10NEW FOR
ALULIGHT 20
ALULIGHT 35
• Rechargeable dive light in aluminium housing.
• Standard 20 watt bulb gives 30 minutes burn time.
• Retractable 2-position handle with Elastomer grip.
• Length 180mm, diameter 70mm.• Double O-ring for improved
watertightness.
• 35 minutes burn time at full power 6V.
• Recharges completely in 5 hours.• Very compact: diam. 70 mm,
length 170 mm.• The ON/OFF switch and power
control are on the handle.
Without a doubt the most unique dive torch available at the moment: adjustable power 100%, 50% and strobe mode. • It runs on only two C-Alkaline cells. • Ø = 50mm L = 220mm • Aluminim head. • LED 3W/25W at 6° - 6500 kelvin.
MULTI-LIGHT
10NEW FOR
71
PRODUCT GUIDE
TO
RC
HE
S
7.0
LUMEN X4 & LUMEN X6
LUMEN LED
QUARTZ
COMBIFLASH
• Simple and ergonomic.• 4 and 6 cell models.• Compact lamp providing 6
hours of optimum illumination.• Thumb-operated switch.• Beam adjusted by turning front
cap.
• Body: Material Partially rubberrized Thermoplastic.
• Batteries: 6 C size elements.• Power: Comparable to more than 50 watts.• Colour temperature: More than 6000 K.• Duration: More than 6 hours.• Dimensions: 60 x 235 mm.• Operational depth: 120 m.• Switch: Mecanical sliding. • Safety: Lock Yes.
• Magnetic switch.• Uses 4 or 8 AA cells.• Tempered glass lens.• Faceted reflector.• Halogen bulb (3300°K).
• Back-up and signal lamp at one end.• Powerful strobe signal light at the
other.• Supplied with adjustable lanyard.• Optional Velcro strap available.
• Rechargeable dive light in aluminium housing with NiMH battery pack.
• Two power selection possibility.• Standard 50 watt bulb gives 50 minutes
burn time.• Switch with “Warning” position.• Electronic circuit, checks and monitors the
functioning of each element.• Retractable 2-position handle with
Elastomer grip.• Length 220 mm, diameter 80 mm.
ALULIGHT 50
72
PRODUCT GUIDE
KN
IVE
S
7.0
DIABLO
SQUEEZE
ZAK ALPHAZAK
• 2 different blade designs.• Made from marine grade stainless steel.• Easy grip 2 layer handle.• Simple non-mechanical sheath locking
system.• Sheath straps have quick-release
buckles.• Small compact knife.• Released from sheath by
squeezing the handle.• Can be screwed on BC or worn
with standard straps.
• Small knive.• 1 cutting edge and 1 saw edge.• Designed as a dedicated BC knife.• Supplied for leg, BC or hose mounting.
• Mid size knife.• 1 cutting edge and 1 saw edge.• Rubber strap with quick
release buckle.
• 2 sizes of blade.• 1 cutting edge and 1 saw edge.• Metallic butt.
AQUA LUNG CISORS
73
PRODUCT GUIDE
AC
CE
SS
OR
IES
7.0
TECH DECO STOP BUOY
• Made in Polyurethane.• Includes a inverted ducksbill valve.• Weighted lower opening.• Fitted with 12m of line and carried in
a pocket retained by a snap hook.
DELAYED SURFACE MARKER BUOY
• Carried by diver and released for deco stops.
• Height 1.2m, volume 16 litres.• Weighted lower opening.• Fitted with 12m of line and carried in a
pocket retained by a snap hook.
SURFACE MARKER BUOY
• Marks diver’s position at the surface.• Round or torpedo shaped.• Orange colour.
APEKS WRECK REELS
• Aluminum body and hard anodiza-tion with yellow nylon rope.
• Adjustable brake with Stopper.• 2 length of rope 85m et 45m.
APEKS WRIST SLATES
• Old by velcro and elastic.• 3 pages.• Supply with a pencil. BELTS
Aqua Lung belt• Nylon webbing.• Kam buckle for
easy belt length adjustment.
Soft belt• Pocket belt.• Easily accepts
shot pouches or standard weights.
• Available in 4 sizes.
2010REGULATORS
LEGEND GLACIA LEGEND LX SUPREME LEGEND LX LEGEND SUPREME LEGEND KRONOS SUPREME KRONOSMIKRON(ALSO IN WOMENS)
FIRST STAGE
Over-balanced diaphragm for superior performance
Balanced diaphragm
High flow in-line piston
Automatic Closure Device (ACD) seals out water from the first stage inlet
Integrated “Air Turbo System” to boost breathing performance
# of Medium Pressure / High Pressure ports
Din connector available
Nitrox compatible up to 40% out of the box. Out of Europe only.
l
l
l
4 / 2
300
l
l
l
l
4 / 2
300
l
l
l
l
4 / 2
300
l
l
l
l
4 / 2
300
l
l
l
l
4 / 2
300
l
l
l
l
4 / 2
300
l
l
l
l
4 / 2
300
l
l
Optional
l
4 / 1
300
l
COLDWATER FEATURES
SECOND STAGE
Pneumatically balanced for effortless inhalation
Inhalation adjustment feature to control breathing effort
Venturi Adjustment Switch to control air flow
Comfo Bite mouthpiece eliminates jaw fatigue
Environmentally sealed to reduce freezing and keep mechanism clean and dry
Heat exchanger
Lip shield for added warmth
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
74
l
l
l
4 / 1
300
l
l
l
l
4 / 1
300
l
l
Optional
l
4 / 1
300
l
l
Optional
l
4 / 1
300
l
l
4 / 1
200
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
75
TITAN LX SUPREME TITAN LX TITANTITAN SUPREME CALYPSONEW
2010OCTOPUS
LEGEND OCTOPUS
LEGEND GLACIA OCTOPUS
MIKRON OCTOPUS
KRONOS OCTOPUS
TITAN LX OCTOPUS
ABS OCTOPUS
CALYPSO/TITAN OCTOPUS
SP
EC
S
8.0
NEW NEW
NEW
2010BUOYANCYCOMPENSATORS
BC Type
Releasable Weight
Non-releasable Weight
Waistband
Pockets
Octo-pockets
D-rings
Dump Valves
Sizes/Lift Capacity/Volume(lbs/Liters)
Colors
Jacket Style
Two SureLock pockets Size XS-ML - 4.5 kg Size L - XXL - 7 kg
XS = noneS = 3.5 kgM - L = 4.5 kg
Non-adjustable Depth compensating
2 zippered pockets
1 (right)
5 stainless (2 of them are angled)
2 flat e-valves
Size | lbs | LitersXS 27 12SM 30 13MD 35 15ML 38 17LG 47 21XL 61 27XXL 61 27
Black / Red
Jacket Style
Two SureLock pocketsSize XS-ML - 4.5 kgSize L - XXL - 7 kg
XS = noneS = 3.5 kgM - L = 4.5 kg
Non-adjustable Depth compensating
2 zippered pockets
2 new style of Octo-pocket
4 stainless
2 std valves
Size | lbs | Liters XS 24 10SM 27 12MD 29 13ML 33 15LG 44 20
Black / Red
Jacket Style
Two SureLock pockets Size XS-ML - 4.5 kgSize L - XXL - 7 kg
XS = noneS = 3.5 kgM - L = 4.5 kg
Non-adjustable Depthcompensating
2 zippered pockets
0
6 stainless (2 of them are angled)
2 std valves
Size | lbs | Liters XS 27 12SM 30 13MD 35 15ML 38 17LG 47 21XL 61 27XXL 61 27
Black / Silver / Blue
Jacket Style
Not weight integrated except size XXS which holds a total of 5.5 kg with hook and loop closures
None
Adjustable
2 large, hook & loop pockets
1 (right)
2 stainless
1 std valve + 1 lower valve
Size | lbs | LitersXXS 18 8XS 26 11SM 29 13MD 37 16ML 37 16LG 41 18XL 49 22
Black
Back Inflation
Two SureLock pockets4.5 kg each
All sizes = 4.5 kg
Adjustable
Fold down, easy-access pocket
0
4 plastic
2 flat e-valve
Size | lbs | LitersXXS 22 10XS 22 10SM 22 10MD 22 10ML 34 15LG 34 15XL/XXL34 15
Green Grey / Blue Grey
76
PRO QDi3The best of the Pro QD family. This model sports integrated i3 inflation technology along with low profile flat e-valves.
PRO LTThis weight-integrated, jacket style BC is the latest addition to the highly successful family of “Pro” BCs.
PRO QDOur most popular all-roung jacket style BC. The perfect blend of function and durability.
WAVE A rugged, fade-resistant, jacket-style, entry-level BC. If you like to wear your weight on a belt, then this is a good choice for you.
ZUMA This ultra-light, weight-integrated, back inflation BC has everything you need, yet lacks weight and bulk.
Jacket / Back Inflation Hybrid
Two SureLock pockets 4.5 kg each
XS = noneS = 3 kgM - L = 4.5 kg
Adjustable using Multiset™
2 zippered pockets
2
4 stainless
2 flat e-valves
Size | lbs | LitersXS 22 10M 22 10SM 29.5 13MD 33 15ML 38.5 17LG 43 19
Black / Pink
Jacket / Back Inflation Hybrid
Two SureLock pockets 4.5 kg each
XS = noneS = 3 kgM - L = 4.5 kg
Adjustable
2 zippered pockets
2
4 plastic
2 flat e-valves
Size | lbs | LitersXS 24 11M 24 11SM 28 12MD 33 15ML 37 16LG 44 20
Black / Pink
Back Inflation
Two SureLock pockets 7 kg each
All sizes = 4.5 kg
Adjustable
2 zippered, 1 fold-down
0
5 large, angled stainless (4 on size small)
3 std valves
Size | lbs | LitersSM 50 22MD 50 22ML 50 22LG 50 22XL 50 22
Black
Back Inflation
Two SureLock pockets 4.5 kg each
XS = noneS = 3 kgM - L = 4.5 kg
Adjustable Depth Compensating
2 zippered pockets
0
3 angled stainless
2 std valves
Size | lbs | LitersSM 30 13MD 36 16ML 36 16LG 40 18XL 50 22
Red / Silver
Back Inflation
Two SureLock pockets 4.5 kg each
XS = noneS = 3 kgM - L = 4.5 kg
Adjustable Depth Compensating
2 zippered pockets
0
2 angled stainless
2 std valves
Size | lbs | LitersS 30 13M 30 13MD 36 16ML 36 16LG 40 18XL 50 22
Black / Silver
77
PEARL i3 A feature-rich ladies BC using integrated i3 inflation. Comfort, function, looks - this BC has it all.
PEARLA ladies BC that combines superior fit, comfort and cosmetics with a traditional inflation system.
BLACK DIAMONDThis rugged back-inflation BC bridges the gap between recre-ational and technical diving. It offers plenty of pockets and D-rings.
BALANCEThe most popular back-inflation BC in our lineup. The patented harness innovations provide maximum comfort.
LIBRAA specially patterned ladies version of the Balance BC. Pressure points have been removed for maximum comfort.
SP
EC
S
8.0
2010WETSUITS
78
5.5mm 1 piece suit
5.5mm 2 pieces suit
5.5mm shorty 5.5mm 1 piece suit
4mm shorty 7mm 2 pieces suit
5.5 or 7mm 1 piece suit
5.5 mm jacket without hood
5.5 mm jacket with hood
6.5mm 1 piece suit with hood
SHARM FLIPPER MAHE BALI BORA BORA HUDSON BALANCE COMFORT BERING
USUAL SIZES
AQUA LUNG SIZES
PARTS TO MEASURE
HEIGHT
WEIGHT (kg)
HIP CIRCUMFERENCE
WAIST CIRCUMFERENCE
CHEST CIRCUMFERENCE
(B) NECK TO WRIST
WRIST CIRCUMFERENCE
ANKLE CIRCUMFERENCE
CALF CIRCUMFERENCE
(F) CROTCH TO ANKLE
(B) NECK TO ANKLE
BICEP CIRCUMFERENCE
HEAD CIRCUMFERENCE
FOREHEAD TO NAPE
46
XS
1
155-166
47-63
85
76
86
72
16
21
32
65
128
27
53
45
48
S
2
163-169
54-70
92
81
90
75
17
22
33
68
134
29
55
45
50
M
3
166-175
61-79
96
86
95
78
18
22
33
71
139
30
57
46
52
ML
4
172-181
70-89
101
89
97
80
19
24
34
73
143
32
59
47
54
L
5
178-187
80-97
107
96
102
85
20
26
35
75
148
34
61
48
56
XL
6
184-190
88-107
120
101
110
88
22
28
38
78
155
37
63
49
58
XXL
7
190…
96.…
125
106
115
92
23
29
40
80
160
40
64
50
Min tolerance
+ 4-
+ 3-
+ 5-
+ 5-
+ 5-
+ 2-
+ 1-
+ 1-
+ 1-
+ 1.5-
+ 3-
+ 1-
+ 2-
+ 2-
MEN’S S IZ E S
79
5.5mm 1 piece suit
7mm 1 piece suit
6.5mm 1 piece suit with hood
5.5mm jacket with hood
6.5mm 1 piece suit with hood
7mm 1 piece suit with hood
7mm 1 piece suit with hood
4mm 1 piece suit neoprene
3mm 1 piece suit neoprene
SAFAGA - SHARM
USUAL SIZES
AQUA LUNG SIZES
PARTS TO MEASURE
HEIGHT
WEIGHT (kg)
HIP CIRCUMFERENCE
WAIST CIRCUMFERENCE
CHEST CIRCUMFERENCE
(B) NECK TO WRIST
WRIST CIRCUMFERENCE
ANKLE CIRCUMFERENCE
CALF CIRCUMFERENCE
(F) CROTCH TO ANKLE
(B) NECK TO ANKLE
BICEP CIRCUMFERENCE
HEAD CIRCUMFERENCE
FOREHEAD TO NAPE
38
XS
1
150-160
47-50
76
62
72
67
15
20
30
67
124
25
50
45
40
S
2
160-163
50-54
80
65
74
68
16
21
31
69
129
26
53
46
42
M
3
163-166
54-61
82
68
77
70
17
22
32
71
132
28
56
46
44
ML
4
166-170
61-65
87
73
82
73
18
23
33
73
139
29
59
47
46
L
5
169-172
65-72
91
77
88
76
19
24
35
77
145
30
62
48
48
XL
6
175…
73…
95
81
92
79
20
25
36
80
150
31
63
49
Min tolerance
+ 4-
+ 3-
+ 5-
+ 5-
+ 5-
+ 2-
+ 1-
+ 1-
+ 1-
+ 1.5-
+ 3-
+ 1-
+ 2-
+ 2-
WOMEN’S S IZES
SIZE PARTS
HEIGHT
WEIGHT (kg)
CHEST
WAIST
FOREARM
WRIST
CROTCH TO ANKLE
CALF
8
135-139
31-33
67-72
61-66
23-24
15-16
51-55
29-31
10
139-143
34-36
70-75
65-70
24-25
15-16
53-57
30-32
12
144-148
38-40
73-78
67-73
25-26
16-17
55-59
31-33
14
148-152
41-43
76-81
71-76
26-27
16-17
57-61
32-34
16
152-156
45-57
79-84
79-84
27-28
17-18
59-63
33-35
C HILD R E N ’ S S IZ E S
SP
EC
S
8.0
ICELAND ICELANDCOMFORT
BLIZZARD BLIZZARD PRO INTRUDER
Photos: PPO2maxTeam. JJ. L’Héritier
©Aqua Lung International 2009-2010 Aqua Lung®, Apeks®, Sea Quest® names, logos and their respective trademarks are registered trademarks of Aqua Lung International. Suunto® and the Suunto logo are registered trademarks of Suunto Oy. Printed in France - FO-design.Products, technical details and specifications in this catalog are subject to change without notice.
PARTNERS
NEMO 33 www.nemo33.com
OCEANICA PROD www.oceanica-prod.com
POISSON LUNE PRODUCTION www.poissonlune.fr
NAUSICAA www.nausicaa.fr
CNRS www.cnrs.fr
DRASSM www.adramar.fr
MARENOSTRUM www.aquariummarenostrum.fr
HEMISPHERESUB www.hemispheresub.fr
CINÉAQUA - PARIS www.cineaqua.com
TARA OCEAN oceans.taraexpeditions.org
Réseau Océan Mondial www.worldoceannetwork.org
Earth & Sea Images Under the Pole underthepole.com
Laurent Ballesta, L’Oeil d’Andromède
Erwan Amice, CNRS
BY AQUA LUNGCOLORS
TRAVEL Compact and lightweight
equipment, without
sacrificing performance
and comfort
You will find products as:
• MIKRON
• ZUMA
• BALI
• MAHE
PHOTO Dedicated regulators,
help the shooting.
Freedom of the field of
vision.
You will find products as:
• KRONOS
• KRONOS SUPREME
• MISTRAL
CENTER Durable and easy to
service gears for intensive
use without relinquishing
performance or comfort
You will find products as:
• CALYPSO
• SAFAGA
• WAVE
You have special needs and requirements?
Aqua Lung has decided to help you on your choice. You will find on this new catalogue some colored logos,
they will help you to make an appropriated selection for your next diving gear.
AL-CATA2010_couverture.indd 2 24/12/09 9:03:10
43.12 N 5.32 E
43.12 N 5.32 E
JO
UR
NE
Y
10
We make equipment for people to experience the fun and adventure of scuba diving.
AQUALUNG.COM
AQ
UA
LU
NG
2
010
EN
AL-CATA2010_couverture.indd 1 24/12/09 9:03:08