APXV86-909014-C
-
Upload
ahmad-dedi-affandi -
Category
Documents
-
view
246 -
download
0
description
Transcript of APXV86-909014-C
Product Data Sheet APXV86-909014-C
Optimizer® Dual Polarized Antenna, 790-960, 90deg, 15.3dBi, 2m, VET, 0-10deg
Allinformationcontainedinthepresentdatasheetissubjecttoconfirm
ationattim
eofordering
RFS The Clear Choice ® APXV86-909014-C Rev: C Print Date: 21.01.2015Please visit us on the internet at http://www.rfsworld.com/ Radio Frequency Systems
Product DescriptionDense urban for LTE800 (Digital Dividend), CDMA and GSM 900 network optimisation.Features/Benefits• One single Cross polarized antenna.• Quick and easy to adjust• Variable electrical downtilt – provides enhanced precision in controlling intercellinterference. The tilt is infield adjustable 0 – 10 deg.• Upgradable to remote electrical tilt• Reduction of visual impact by gathering 3 antennas in a cylindrical volume.• Reduction of site dimensions will ease site acceptance.•Slanted DP antenna allows air combining, thus 3dB saving in power budget.•Compatible with usual base stations with 35 dB typical isolation between ports.•Optimized suppression lobes ( Typically > 20dB ) allows strong mechanical tilt.•Effective polarisation diversity ensured by high cross polar discrimination..•Possible camouflage solution on demand.Technical SpecificationsElectrical SpecificationsFrequency Range, MHz 790-862 806-870 870-960Horizontal Beamwidth, deg 85 85 88Vertical Beamwidth, deg 10Electrical Downtilt Range, deg 0-10Gain, dBi (dBd) 14.9 (12.8) 15.1 (13.0) 15.3 (13.2)1st Upper Sidelobe Suppression, dB >18Upper Sidelobe Suppression, dB >18Front-To-Back Ratio, dB >23Polarization Dual pol +/-45°VSWR < 1.5:1Isolation between Ports, dB >303rd Order IMP @ 2 x 43 dBm, dBc >150Impedance, Ohms 50Maximum Power Input, W 500Lightning Protection Direct GroundConnector Type/Location (2) 7-16 Long Neck Female/Bottom
Mechanical SpecificationsDimensions - HxWxD, mm (in) 2080 x 328 x 128 (81.88 x 12.91 x 5.03)Weight w/o Mtg Hardware, kg (lb) 22.6 (49.7)Survival/Rated Wind Speed, km/h (mph) 200 (125) / 150 (93.2)Applied Wind Load Standard DIN 1055-4Wind Load @ Rated Wind, Front, N (lbf) 400 (90)Wind Load @ Rated Wind, Max., N (lbf) 443 (100)Wind Load @ Rated Wind, Side, N (lbf) 310 (70)Wind Load @ Rated Wind, Rear, N (lbf) 443 (100)Operation temperature, °C (°F) -40 to +60 (-40 to +140)Radome Material/Color Fiberglass/Light Grey RAL7035Mounting Hardware Material Diecasted AluminumRadiating Element Material BrassReflector Material AluminumPacking Dimensions, HxWxD, mm (in) 2320 x 375 x 220 (91.33 x 14.76 x 8.66)
Ordering InformationMounting Hardware APM40-2Mounting Pipe Diameter, mm (in) 60-120 (2.36-4.72)Mounting Hardware Weight, kg (lb) 3.4 (7.5)
Product Data Sheet APXV86-909014-C
Optimizer® Dual Polarized Antenna, 790-960, 90deg, 15.3dBi, 2m, VET, 0-10deg
Allinformationcontainedinthepresentdatasheetissubjecttoconfirm
ationattim
eofordering
RFS The Clear Choice ® APXV86-909014-C Rev: C Print Date: 21.01.2015Please visit us on the internet at http://www.rfsworld.com/ Radio Frequency Systems
Antenna End Plate Antenna Array Antenna Drawing
Vertical Pattern Horizontal PatternNotes•Available ConfigurationsAPXV86-909014-C – No ACU included – Weight 26 kg, 57.3 lbAPXV86-909014-C-A20 – (1) Pre-commissioned ACU included – Weight 26.5 kg, 58.4 lb•For additional mounting information please click "External Document Links" below.External Document LinksAPM40 Series DatasheetAPM40 Series Installation Instructions