Apriva BT200-TSmart Card ReaderCN4G, CN4eG, CK61G

User’s Guide

ii Apriva BT200-T Smart Card Reader User’s Guide

Intermec Technologies Corporation

Worldwide Headquarters6001 36th Ave.W.Everett, WA 98203U.S.A.

www.intermec.com

The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation.

Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation.

© 2009-2010 by Intermec Technologies Corporation. All rights reserved.

The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license), Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks or registered trademarks of Intermec Technologies Corporation.

There are U.S. and foreign patents as well as U.S. and foreign patents pending.

Document Change RecordThis page records changes to this document. The document was originally released as Revision 001.

Version Number Date Description of Change

004 9/2010 Updated procedures on how to connect the Apriva BT200-T to the CN4G and CN4eG.

003 9/2009 Updated procedures on how to install Odyssey Access Client and Fortress Security Client onto the CK61G.

002 7/2009 Updated procedures on how to connect the Apriva BT200-T to the CK61G.

Apriva BT200-T Smart Card Reader User’s Guide iii

iv Apriva BT200-T Smart Card Reader User’s Guide

Contents

ContentsLearning About the Apriva BT200-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Understanding the Power Button and LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Checking and Charging the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing and Pairing the SCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Loading the SCR Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Pairing the SCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Installing Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Installing the AprivaGuard Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Apriva BT200-T Smart Card Reader User’s Guide v

Contents

vi Apriva BT200-T Smart Card Reader User’s Guide

Learning About the Apriva BT200-TThe Apriva BT200-T Bluetooth Smart Card Reader (SCR) works with the CN4G, CN4eG, or CK61G Mobile Computer to enable data sensitive enterprises to have a high level of security for wireless communication. The SCR provides users with strong identification and authentication using hard token certificate and private key policies.

Understanding the Power Button and LEDsThe SCR has a Power button and two status LEDs to tell you the status of the smart card reader.

Apriva BT200-T Power Button and Status LEDs

Understanding the Status LEDs

Action LED Status Description

You power on the SCR.

Solid green for a few seconds

The SCR has a good charge.

Solid red You need to charge the battery.

No LED The battery is completely discharged.

You first insert a common access card (initial four seconds).

Solid green Battery is over 75% charged and is ready for operation.

Flashing green Battery has between 25% and 75% charged capacity.

Solid red Battery has less that 25% charge. You need to charge the battery.

Power button

Status LEDs

Apriva BT200-T Smart Card Reader User’s Guide 7

If the LED is not blinking after you press the Power button, you need to charge the SCR for 30 or more minutes. After 30 minutes, you need to check the status of the indicators by inserting a smart card.

Checking and Charging the BatteryThe SCR takes approximately 3 hours to charge its internal battery. You can use the wall charger or a USB cable to charge the SCR.

To check the status of the battery• Press the Power button and observe the status LEDs. For more

information on the status LEDs, see “Understanding the Power Button and LEDs” on page 7.

To charge the battery using the wall charger1 Attach the SCR to the wall charger.

2 Insert the wall charger into an electrical outlet.

3 The green LED turns on indicating that the SCR is charged.

Common access card has been inserted for more than four seconds.

Flashing green or red every one second.

Connection between the mobile computer and the SCR has been established, and the SCR is ready for operation.

You connect the USB cable.

Solid green SCR is being charged, and cannot be used.Note: You can use the SCR when you are charging with the wall charger, but you cannot use the SCR when a USB connection is the main power source.

You remove the Smart card or charge cable.

Green and red flash once

When you press the Power button, the LED flashes to provide a visual clue that the SCR has been powered off.

Understanding the Status LEDs (continued)

Action LED Status Description

8 Apriva BT200-T Smart Card Reader User’s Guide

To charge the battery using a USB cable

1 Connect the USB adapter to the USB cable, then connect the USB adapter to the SCR to the port labeled PC.

2 Connect the other end of the USB cable to your notebook or desktop PC. The green LED turns on indicating that the SCR is charged.

While charging using the USB cable, all smart card operations are disabled.

Installing and Pairing the SCRThere are five important steps to follow before you can use theSCR.

To install and pair the SCR1 For the CK61G, upgrade the operating system (OS) and

SmartSystems Platform Bundle (SSPB). For more information, see the CK61 Mobile Computer User’s Manual.

2 Load the SCR software onto the mobile computer.

3 Pair the SCR to the mobile computer.

4 Install security.

5 Install the AprivaGuard software.

Use the following sections to help you install and pair the SCR to your mobile computer.

Note: If the battery is discharged to the point where you cannot turn on the SCR, you need to charge, the SCR for 20 to 30 minutes. Once the SCR has been charged for that amount of time, turn the SCR off and on again to finish charging.

Apriva BT200-T Smart Card Reader User’s Guide 9

Loading the SCR Software Use this section to learn how to load the SCR software onto your mobile computer.

To load the SCR software1 Tap the iConnect icon. The iConnect menu appears.

2 If you are installing the SCR software onto the CK61G:

a Select Enable and make sure that Assured Radio Deactivation is not checked. The mobile computer restarts with Assured Radio Deactivation turned off.

b Tap OK on the Assured Radio Deactivation screen.

c Tap Start > Settings > the Connections tab > Bluetooth. The Bluetooth Settings screen appears.

d Select the Turn on Bluetooth check box to enable Bluetooth.

e Tap OK to exit the Bluetooth Settings screen.

10 Apriva BT200-T Smart Card Reader User’s Guide

If you are installing the SCR software onto the CN4G or CN4eG, continue to the next step.

3 Establish an ActiveSync connection between your mobile computer and your desktop PC by placing the mobile computer into communications dock. For more information, see the mobile computer user’s guide.

4 Once a connection has been established, the Microsoft ActiveSync screen appears on your PC. Click the Explore button and browse to the \My Documents folder.

5 Download the Apriva software from www.intermec.com/ait and extract all of the files into the \My Documents folder.

6 Remove the mobile computer from the communications dock and tap Programs > File Explorer on your mobile computer. The File Explorer screen appears.

Apriva BT200-T Smart Card Reader User’s Guide 11

7 Install the SCR software and pair the SCR with your mobile computer. For help, see the next section.

Pairing the SCR Use this section to learn how to pair the SCR with your mobile computer. For security purposes, you must pair the SCR using a USB cable. After the initial pairing, you do not need to pair the SCR with a USB cable again.

To pair the SCR1 Browse to the \My Documents folder and tap

AprivaSmartCardDriver.SWM5PPCxxxx.cab where xxxx is the version number. The .cab file is installed onto your mobile computer and cold boots your device.

2 Place the mobile computer into the communications dock.

12 Apriva BT200-T Smart Card Reader User’s Guide

3 Connect a USB cable to your communications dock and to the SCR using the USB adapter provided. Note that you have to connect it to the port labeled PDA.

The SCR Connected to the CK61G Communications Dock.

4 Turn the smart card reader on by pressing the Power button. The green LED on the card reader blinks once every second to indicate that there is a USB connection present.

Note: Use the cable that you connected to your PC. The cable that comes with the SCR is a charge only cable.

USB adapter

USB cable

Power button

Status LEDs

Apriva BT200-T Smart Card Reader User’s Guide 13

5 On the mobile computer, tap Start > Settings > System > Apriva Reader. The Apriva Reader screen appears.

6 Pair the SCR and the mobile computer by selecting the USB option and tapping the Pair button.

7 Tap Test Connection to verify that the mobile computer is communicating with the smart card reader.

8 Tap the Version tab. The Version screen appears.

9 Tap the Update button.

10 Select AprivaReaderxxxx.bin where xxxx is the version number. The smart card reader begins the firmware update process.

11 Tap the Details tab and the Verify Signatures button to verify the digital signatures of the firmware.

12 Tap the Connection tab, and select the Bluetooth option.

13 Remove the USB cable from the SCR, and turn the power to the SCR back on by pressing the Power button.

Note: If the green LED blinks once every four seconds, the SCR is powered on, but there is no USB connection. Repeat Step 3 to pair the SCR. For more information about the LED status see, “Understanding the Power Button and LEDs” on page 7.

14 Apriva BT200-T Smart Card Reader User’s Guide

14 Tap Test Connection to verify that the SCR is communicating with the mobile computer.

15 Tap OK to close the Apriva Reader application.

16 Browse to the \My Documents folder and tap Semtek Innovative Solutions CAC Reader.cab. The .cab file is installed onto your mobile computer.

17 Go to File Explorer, browse to the \My Documents folder, and tap AprivaCSPware.SWM5PPC.cab. The .cab file is installed and your mobile computer reboots.

18 (Optional) If you need access to the Department of Defense web site, go to File Explorer, browse to the \My Documents folder, and tap InstallRoot_WinMobile6_313.cab. The .cab file is installed onto your mobile computer.

19 If you are installing the SCR software onto the CK61G, you need to install the following files in the \My Documents folder:

• Intermec Funk_AprivaConfig.cab

• SR08100900_RTC_CK3WM61_ALL.cab

• SR10052500_FUNK_WM61_ALL.cab

20 Install security. For help, see the next section.

Note: Pairing the smart card reader only needs to be performed once. To select a connection, tap the USB or Bluetooth option when the SCR and the mobile computer are connected to the communications dock.

Apriva BT200-T Smart Card Reader User’s Guide 15

Installing SecurityYou can choose to install two types of security onto the mobile computer:

• Odyssey Access Client

• Fortress Secure Client

The Odyssey Access Client and Fortress Secure Client both provide a high level of security over your WLAN. These clients protects the authentication and connection of the WLAN users and devices, ensuring that only authorized users connect, that login credentials are not compromised, and that both network and data privacy will be maintained over the wireless link.

For help on selecting a client, contact your local Intermec representative.

To install Fortress Secure Client1 Go to File Explorer, browse to the \My Documents folder, and tap

WZeroConfigEnable.cab. Microsoft Zero Config is installed.

2 Make sure that the mobile computer can successfully associate with an access point by tapping the iConnect icon > Status > Wireless > the Advanced button. The ISpyWiFi utility appears and shows whether you can associate your mobile computer with an access point.

3 Use the iConnect application to configure the IP address, network mask, and SSID.

4 Download the Fortress Secure Client Installation Guide from the Intermec AIT web site, and follow the directions to install and configure the Fortress Secure Client.

5 Install the AprivaGuard software. For help, see “Installing the AprivaGuard Software” on page 17.

The CN4G and CN4eG comes with Odyssey Access Client already loaded. To use the client on your CN4G and CN4eG, you must purchase a user license, and activate it. For help on activating the client, see the CN4G and CN4eG Odyssey Access Client Installation Instructions.

16 Apriva BT200-T Smart Card Reader User’s Guide

To install Odyssey Access Client for the CK611 Go to File Explorer and browse to the \My Documents folder,

and tap Intermec Funk_Apriva.cab file. The .cab file is installed on your mobile computer.

2 Tap WZeroConfigEnable.cab. Microsoft Zero Config is installed on your mobile computer.

3 Purchase and download the Odyssey Access Client. For more information, go to www.juniper.net.

4 Download the Odyssey Access Client Installation Guide from the Intermec AIT web site, and follow the directions to install and configure the Odyssey Access Client.

5 Install the AprivaGuard software. For help, see “Installing the AprivaGuard Software” on page 17.

Installing the AprivaGuard SoftwareInstall the AprivaGuard software license onto your mobile computer to enable PKI authentication and validation for the mobile computer and a given application.

To install the AprivaGuard software• Browse to the \My Documents folder, and tap

AprivaGuard.WM5PPC.cab file. AprivaGuard installs onto your mobile computer.

Note: Set the correct date and time, and install any other software applications you have before installing AprivaGuard. Once AprivaGuard is installed, you cannot make any changes to your mobile computers.

Apriva BT200-T Smart Card Reader User’s Guide 17

18 Apriva BT200-T Smart Card Reader User’s Guide

Worldwide Headquarters6001 36th Avenue WestEverett, Washington 98203U.S.A.tel 425.348.2600fax 425.355.9551www.intermec.com

© 2010 Intermec Technologies Corporation. All rights reserved.

Apriva BT200-T Smart Card Reader User’s Guide

*931-059-004*P/N 931-059-004