Hilti. Outperform. Outlast.Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com • en español 1-800-879-5000

Hilti (Canada) Corporation 1-800-363-4458 • www.hilti.ca10

All Seasons Crack and Joint Insulating Foam (CF-AS CJP)

Seal. Fill. Insulate. All Seasons Crack and Joint Insulating Foam (CF-AS CJP)

Technical Data** CF-AS CJPFoam yield per can Approx 1.60 ft³

Approximate cure schedule (ASTM C1620) Tack free after ~ 12 minutes, Ready to cut after ~ 25 minutes

Temperature resistance of cured foam 41°F to 95°F (5°C to 35°C)

Application temperature 32°F to 95°F (0°C to 35°C)

Air infiltration (ASTM E283) 0.01 cfm/ft² @ 4.56 psf (75pa)

Surface burning characteristics UL 723 Flame Spread: 0, Smoke Development: 5

Shelf life from date of manufacture 12 months

R-Value (ASTM C518) 5.24

Sound transmission classification 60 (relates to specific construction)

Tested in accordance with UL-723, ULC-S102, ASTM C1620, ASTM E283, ASTM C518, ASTM E90, ASTM E84, ASTM E33, and ICC ES ESR 2179

Order InformationDescription Contents Item No. Contents Item No.

CF-AS CJP 1 can 02005479 6 cases (72 cans) + 1 dispenser 03486216

CF-AS CJP 1 case (12 cans) 03486072 9 cases (108 cans) + 2 dispensers 03486217

CF-AS CJP 3 cases (36 cans) 03486213 16 cases (192 cans) + 2 dispensers 03486218

CF-AS CJP 32 cases (384 cans) 03486214 32 cases (384 cans) + 4 dispensers 03486219

CF-AS CJP 3 cases (36 cans) + 1 dispenser

03486215 32 cases (384 cans) + 2 extra long dispensers

03486504

Applications*

• Pipe/cable/HVAC penetrations• Blank openings, gaps and cracks • Electrical junction boxes• Base plate cracks• Concrete formwork• Metal decking seams• General insulating

*For non fire-rated, non-structural uses

Outperform and Outlast

• Restricts air infiltration and creates water resistant seal

• Use as fireblock for Type V non fire-rated wood frame construction (refer to ESR-2179)

• Low temperature performance allows CF-AS CJP to be applied in extreme conditions ranging from 32°F to 95°F (0°C to 35°C)

• Identifiable orange color• Faster application than traditional

methods such as caulking and batt-insulation

• Premium Hilti CF-DS dispensers allow precision installation with minimal waste

• Provides excellent sound barrier• High-quality valve limits pressure

loss, prolongs shelf life and minimizes waste

• Contains no CFCs

AccessoriesCF-DS-1 Dispenser 00259768

CF-DS-L Extra Long Dispenser (with 27" barrel) 00403843

CF-DS Plastic Nozzle Tip 00311512

CFR-1 Cleaner – 17 oz. can 00024631

The new CF-AS CJP is a high-performance, high-yield foam for filling around penetrations and general gap and crack applications. The CF-AS CJP is an all-in-one solution that delivers superior performance in broad temperature ranges and is ideal for restricting air, sound, dirt, and water infiltration. When used with Hilti CF-DS dispensers you get outstanding dosing control and a safe, efficient way to address any insulating application.

** Test results based on laboratory testing under controlled conditions. Variations from this data are possible. All data measured at 73° F (23°C) and 55% relative humidity

ASTM G 21 UL 1715 EPA Method 24 ICC ES – ESR 2179

Base plate cracks Concrete formwork voids Metal decking seams General insulating

CF-AS CJP All Seasons Crack and Joint Insulating Filler Foam Product Description

CF-AS CJP All Seasons Crack and Joint Pro is a high performance, high yield polyurethane foam for filling around penetrations and general gap/crack applications in non fire-rated assemblies. This product is ideal for reducing air, sound, dirt, and water infiltration. CF-AS CJP complies with ASTM C 1620, the industry’s first specification on aerosol foam sealants. NOT FOR USE AS A FIRESTOP.

Applications For Use

Pipe / cable penetrations Blank opening gaps / cracks HVAC ducts Electrical junction boxes

Testing / Approvals

UL 723 ASTM C 1620 ASTM E 90 ASTM E 283

Technical Data

Foam Yield per Can: Approx 1.60ft3 Approximate Cure Schedule: Tack free after approx 12 minutes (ASTM C 1620) Ready to cut after approx 25 minutes

Application Temperature: 32oF to 95oF (0oC to 35oC) Air Infiltration: < 0.01 cfm/ft2 @ 1.56 psf (75Pa) (ASTM E 283) Water Infiltration: No Leakage after 15 minute exposure (ASTM E 331) (@ 2.9 psf)

Sound Transmission Classification: 60 (as tested per ASTM E 90) Dimensional Stability: +/- 4% (AAMA 812)

Tensile Strength: > 6 N/cm2 (HTC Method 2106)

R-Value: 5.24 (ASTM C 518)

Surface Burning Characteristics: Flame Spread: 0 (UL 723) Smoke Developed: 5

Shelf Life from Date of Manufacture: 12 months

(when stored at 68oF)

Installation Instructions

Mount dispenser on can with the can on a flat surface. Do not over tighten. Shake can vigorously after attaching the dispenser.

Open valve to allow foam to fill dispenser. Unlock the safety on the trigger to allow foam dispensing. Point away and pull trigger to dispense foam.

Caution:

Read MSDS, product data sheet, and label on can prior to use. Wear protective gloves and eyewear. Shut off all pilot lights and other sources of ignition. Do not smoke when using this product.

Ordering Information

Foam Item No. Description Qty. 2005479 CF-AS-CJP Foam (24 oz can) 1 3486072 CF-AS CJP Foam (case of 12 cans) 12 Dispensers Item No. Description Qty. 259768 CF-DS1 Dispenser 1 403843 CF-DS-L Extra Long Dispenser (with 27” barrel) 1 311512 Plastic Nozzle Tip 20 Cleaner Item No. Description Qty. 24631 CF-R1 Cleaner (17 oz can) 1

C E R T I F I C A T E O F C O M P L I A N C E

Certificate Number 20120330-R13081 Report Reference R13081-2011 June 14

Issue Date 2012-March-30

William R. Carney, Director, North American Certification Programs UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at www.ul.com/contactus

Page 1 of 1

Issued to: Hilti Inc.

5400 S 122nd East Ave Tulsa, OK 74146

This is to certify that

representative samples of

Caulking and Sealants

Have been investigated by UL in accordance with the Standard(s) indicated on

this Certificate.

Standard(s) for Safety: ANSI/UL 723, "Test for Surface Burning Characteristics of Building Materials." Edition 10 – Revision Date 2010/09/13 CAN/ULC-S102M, "Standard Method of Test For Surface Burning Characteristics of Building Materials and Assemblies." Edition 7 – Issued Date 2010/07/01

Additional Information: See the UL Online Certifications Directory at www.ul.com/database for additional information

Only those products bearing the UL Classification Mark should be considered as being covered by UL’s Classification and Follow-Up Service.

The UL Classification Mark includes: UL in a circle: with the word “CLASSIFIED” (as shown); a control number (may be alphanumeric) assigned by UL; a statement to indicate the extent of UL’s evaluation of the product; and the product category name (product identity) as indicated in the appropriate UL Directory. Look for the UL Classification Mark on the product.

PRODUCT COVERED: The product covered by this Section of the Procedure is a prepackaged, pressurized, one-component expanding foam sealant designated by the manufacturer as “CF-AS CJP All Seasons Crack and Joint Insulation Foam and Fireblock” or “CF-AS CJP”.