Application & Products - Pump Guide

STERLING FLUID SYSTEMS GROUPwww.sterlingfluidsystems.com

APPLICATIONS & PRODUCTS - PUMP GUIDE

FOCUSED ON- SERVING INDUSTRY

Sterling Fluid Systems aims to provideunrivalled customer service by being industry focused.

Primarily the industry segments are divided into the three divisions, which are Chemical, Industrial,Energy and Environmental. This is all underpinnedwith a strong emphasis on Service Support.

PROVEN PRODUCTS - SERVING INDUSTRY

Extensive application and material knowledgecombined with the respected and established productranges within Sterling Fluid Systems ensuresconfidence throughout a wide range of markets andmanufacturing processes.

RAPID RESPONSE - PRODUCT SELECTION

Rapid Access to Pump Information and Design is thevery latest electronic on-line product selection package.

Selections and supporting data across the entireSterling Fluid Systems pump product range can beprinted on the spot and made available to customersto ensure they have the most up-to-the minutetechnical data.

LOCAL SERVICE NETWORK- SUPPORTED GLOBALLY

Sterling Fluid Systems recognises the need toprovide the highest level of care and support for allits products and systems operating in the field.

Sterling Service Centres are established all aroundthe world ensuring the very best support is alwayswithin easy reach.

1 2

QUALITY ASSURANCETotal Quality Assurance is offered by all Sterling Fluid Systems

companies within the standards approved to ISO 9000.

Formal directives are also issued in-line with the European

Community ‘CE’ requirements.

All the Group’s manufacturing facilities around the world comply

with the required quality standards of the region as well as the

necessary health and safety requirements.

DESIGNIn this increasingly competitive world, we have the ability to

provide new innovative designs which are both cost effective

and provide high levels of reliability.

Utilising the most sophisticated Computer Aided Design

packages ensures that optimum mechanical and hydraulic

performances are achieved.

FOUNDRIESIn-house foundries specialise in the supply of precision

components and castings in high alloy steels and nickel

based alloys.

These modern, well equipped foundries respond rapidly to all

customer demands as well as serving the Sterling Fluid

Systems companies.

MANUFACTURINGManufacturing and assembly facilities worldwide operate as

individual units, all forming part of an integrated global

manufacturing operation.

These centres of engineering excellence design, manufacture

and develop products, systems and technologies utilising the

most modern DNC processes.

TESTINGExtensive testing facilities ensure performance levels of the

various products meet or exceed the specifications as laid

down by customers and inspection authorities.

COMMITTED TO ENGINEERING EXCELLENCE

PR

OD

UC

T S

UM

MA

RY

WORKING IN PARTNERSHIP Our understanding of your application and process requirements enables us

to provide the engineered solution that is right for your process.

3 4

MARKET FOCUSEDBASIC CHEMICALS Petrochemical processingHeat transfer industryPolymer processingFertiliser processingBasic chemical processing

FINE / DOWNSTREAMCHEMICALSPesticide processingPigments & paints processingResin & adhesive processingDetergents processingFibre processingActive pharmaceuticals

PHARMACEUTICALSActive pharmaceuticalsEnd products

CHEMICAL APPLICATIONS

PITOT TUBE,HYGIENIC,

GEAR

VOLUTE CASING SIDE CHANNEL MULTI-STAGE

MIX

ERS VACUUM PUMPS

ENGINEERED

SYSTEMS

VACUUM TECHNOLOGYLIQUID TECHNOLOGY

End

Suc

tion

End

Suc

tion

- cl

ose

coup

led

End

Suc

tion

- in

-line

, clo

se c

oupl

ed

End

Suc

tion

- se

wag

e, s

lurr

y

End

Suc

tion

- se

lf pr

imin

g

End

Suc

tion

- su

mp

pum

ps

Hor

izon

tal

Hor

izon

tal w

ith N

PSH

indu

cer

Vert

ical

Hor

izon

tal

Hor

izon

tal -

sel

f prim

ing

Vert

ical

Med

ium

flow

Dee

p w

ell

Hig

h flo

w

Pito

t tub

e

Hyg

ieni

c

Gea

r

Slu

dge

mix

ers

Liqu

id r

ing

vacu

um -

sin

gle

stag

e

Liqu

id r

ing

vacu

um -

two

stag

e

Roo

ts b

low

er

Gas

eje

ctor

Liqu

id r

ing

com

pres

sor

(sin

gle

stag

e)

Liqu

id r

ing

com

pres

sor

(mul

ti st

age)

Dry

run

ning

vac

uum

Vacu

um a

nd c

ompr

esso

r sy

stem

s

Mem

bran

e sy

stem

s

Liqu

id s

yste

ms

For detailed information please see page:- 9 9 9 10 10 10 11 11 11 12 12 12 13 13 13 14 14 14 17 15 15 15 16 16 16 17 18 18 18

Absorption • • • • • • • • • • • • • • • •Adsorption • • • • • • • • • • • • • • • •Central vacuum • • • • • •Centrifugal separation • • • • •Cooling water • • • • • • • •Crystallisation • • • •Distillation (reaction vessel) • • • • • • • • • • • • •Distillation (short path) • • • • • • • • • • • • • •Distillation (rectification) • • • • • • • • • • • •Drum or barrel offloading • • • •Effluent treatment • • • • • • • • •Evaporation (falling film) • • • • • • • • • • • • •Evaporation (thin film) • • • • • • • • • • • • • •Extraction • • • • • • • • • • • • • •Filling • • • • • • • • • • •Freeze drying • • • • • • • • • •Pressure filtration • • • • •Product transfer • • • • • • • • • • • • •Reaction gas-liquid • • • • • • • • • • • • • • • • •Reaction liquid-liquid • • • • • • • • • • • • • • • • •Reaction solid-liquid • • • • • • •Solvent recovery • • • • • • • • • • • • • • • • •Steam and power generation • • • • • • • •Tank farms / storage • • • • • • • • • • •Thermal control unit (hot oil, hot water) • • • •Thermal drying • • • •Vacuum drying • • • • • • • • • •Vacuum filtration • • • • • • • • •Water purification / demineralised water • • • • • •

5 6

MARKET FOCUSEDFOOD Drink & beverage industryEdible oil & fats industryFood industry

MACHINERY MANUFACTURING Health care industryIndustrial steam industryLPG / LNG productionLPG / LNG distributionRubber & plastic processing

GENERAL INDUSTRIAL AgricultureBuilding industryMarine industryMetal processingMining / mineral extractionFoundriesTextile processing

INDUSTRIAL APPLICATIONS


Central vacuum • • • • • •Cleaning • • • • • • •Component positioning • • •Cooling water • • • • • • • • •Degassing • • • • • •Demineralised water • • • • • • • • • • • • •Distillation • • • • • • • • • • • •Extraction • • • • • • • • • • • • • • • •Extrusion / Vacuum forming • • • • • • • • •Filling • • • • • • • • • • • • Freeze drying • • • • • • • • • • • • • •Gas compression • • • • •Heat transfer (hot oil) • • • •Heat transfer (hot water) • • •Irrigation • • • • •LPG • • • • •Mixing • • • • • • • •Packaging / Bottling • • • • • • •Product transfer • • • • •Refrigerant handling • • • • • • •Sterilising • • • • • • • • •Tank farms / Storage • • • • • • • • • • • •Thin film evaporation • • • • • • •Vacuum drying • • • • • • • •Washing • • • • • • • • • • • • • •


GEAR


MIX

ERS VACUUM PUMPS

ENGINEERED

SYSTEMS


End

Suc

tion

End

Suc

tion

- cl

ose

coup

led

End

Suc

tion

- in

-line

, clo

se c

oupl

ed

End

Suc

tion

- se

wag

e, s

lurr

y

End

Suc

tion

- se

lf pr

imin

g

End

Suc

tion

- su

mp

pum

ps

Hor

izon

tal

Hor

izon

tal w

ith N

PSH

indu

cer

Vert

ical

Hor

izon

tal

Hor

izon

tal -

sel

f prim

ing

Vert

ical

Med

ium

flow

Dee

p w

ell

Hig

h flo

w

Pito

t tub

e

Hyg

ieni

c

Gea

r

Slu

dge

mix

ers

Liqu

id r

ing

vacu

um -

sin

gle

stag

e

Liqu

id r

ing

vacu

um -

two

stag

e

Roo

ts b

low

er

Gas

eje

ctor

Liqu

id r

ing

com

pres

sor

(sin

gle

stag

e)

Liqu

id r

ing

com

pres

sor

(mul

ti st

age)

Dry

run

ning

vac

uum

Vacu

um a

nd c

ompr

esso

r sy

stem

s

Mem

bran

e sy

stem

s

Liqu

id s

yste

ms

7 8

MARKET FOCUSEDENERGYSteel mill industryOil & gas extractionOil refining (API)Power generation

MUNICIPAL WATERWater supplyWater treatment

HEAVY MACHINERYMining / mineral extractionWaste incinerationPulp & paper industry

ENERGY & ENVIRONMENTAL APPLICATIONS


Boiler feed • Cleaning • Cooling water • • Condensate •Descaling • Drainage • Heat transfer (hot water) •Irrigation • • • Mixing • Pressure generation • •Product transfer • • • •Reverse osmosis • • • • Tank farms / storage • •Vacuum drying • •Washing • •


GEAR


MIX

ERS VACUUM PUMPS

ENGINEERED

SYSTEMS


End

Suc

tion

End

Suc

tion

- cl

ose

coup

led

End

Suc

tion

- in

-line

, clo

se c

oupl

ed

End

Suc

tion

- se

wag

e, s

lurr

y

End

Suc

tion

- se

lf pr

imin

g

End

Suc

tion

- su

mp

pum

ps

Hor

izon

tal

Hor

izon

tal w

ith N

PSH

indu

cer

Vert

ical

Hor

izon

tal

Hor

izon

tal -

sel

f prim

ing

Vert

ical

Med

ium

flow

Dee

p w

ell

Hig

h flo

w

Pito

t tub

e

Hyg

ieni

c

Gea

r

Slu

dge

mix

ers

Liqu

id r

ing

vacu

um -

sin

gle

stag

e

Liqu

id r

ing

vacu

um -

two

stag

e

Roo

ts b

low

er

Gas

eje

ctor

Liqu

id r

ing

com

pres

sor

(sin

gle

stag

e)

Liqu

id r

ing

com

pres

sor

(mul

ti st

age)

Dry

run

ning

vac

uum

Vacu

um a

nd c

ompr

esso

r sy

stem

s

Mem

bran

e sy

stem

s

Liqu

id s

yste

ms

VOLUTE CASING VOLUTE CASING

END-SUCTION

Product ranges

SIHI LaBOUR

Maximum performanceFlow rate: 4800 m3/h 21,000 USgpmHead: 240 m 790 ftTemperature: 400 ºC 750 ºFPressure: 40 bar 580 psiSpeed: 3600 rpm

Features & design optionsl Standards to: DIN 24255, ISO 5199,

ISO 2858, EN 22858, EN 733,ANSI/ASME B73.1M

l Closed or semi-open impellerl Mixed flow impellerl Low flow impellerl Single or double mechanical seall Gas seall Magnetic couplingl Canned motorl Heating jacketsl Monitoring systemsl Triple volute casingsl High temperature designsl Modular designl Standard and special materialsl Centre line design for RBS, MBK, MRS

HALBERG

END-SUCTION SEWAGE, SLURRY

Maximum performanceFlow rate: 1350 m3/h 5940 USgpmHead: 90 m 295 ftTemperature: 80 ºC 176 ºFPressure: 16 bar 232 psiSpeed: 1800 rpm

Features & design optionsl Horizontall Vertical direct-mountedl Vertical open shaftl Spiral vane impeller & free flow impellerl Soft packingl Mechanical seal

Product ranges

SIHI

DBS DES SPLSZ

END-SUCTION CLOSE COUPLED

Product ranges

SIHI

SuperNovaZLK ZTKISOchemCBBD CBED CBCD

ISOlinedCLM CLE GLM CLS GLB GLK ALMA


Features & design optionsl Standards to: ISO 5199, ISO 2858,

EN 22858, EN 733l Closed or semi-open impellerl Mixed flow impellerl Single or double mechanical seall Magnetic couplingl Canned motorl Heating jacketsl Monitoring systemsl High temperature designsl Modular designl Non-metallic materiall PTFE linedl Standard and special materials

END-SUCTION IN-LINE, CLOSE COUPLED

Product ranges

SIHI

SuperNovaZLI ZTI


Features & design optionsl Standards to EN 733l Close coupled designl Single mechanical seall Magnetic couplingl Monitoring systemsl High temperature designsl Modular designl Standard and special materials

END-SUCTION SELF PRIMING


Features & design optionsl Standards to EN 733l Soft packingl Single or double mechanical seall Magnetic couplingl Non-metallic materialsl Suction lifts 8.0m (26 ft)l Vertically mountedl Special materials

Product ranges

SIHI

ULN UEAUEH

UHLM UPLM BGMX

LaBOUR

END-SUCTIONSUMP PUMPS

Maximum performance

Flow rate: 2800 m3/h 12,320 USgpmHead: 140 m 460 ftTemperature: 160 ºC 320 ºFPressure: 16 bar 232 psiSpeed: 3600 rpm

Features & design optionsl Vertical design for tank, vessel or sumpl ISO or ANSI flangesl Round plate (API 610) optionall Flexible couplingl Closed and semi open impellerl Free flow impellerl Intermediate column bearingl Special materialsl Mechanical seall Electric motor

Product ranges

SIHI

ZLNV CBSVDBSVSPLVNOP

HALBERG

9 10

SuperNovaZLN, ZEN, ZDN, ZHN, ZTNISOchemCBSD, CBMDISOlinedCLS, CLM

PC, EO, LV, DZTM, LVA, SZ

CBTA, CBH, CBK, SPL,RBS, MBK, MRS

HORIZONTAL

Maximum performanceFlow rate: 35 m3/h 154 USgpmHead: 325 m 1066 ftTemperature: 180 ºC 356 ºF

Pressure: 100 bar 1450 psi

Speed: 3000 rpm

Features & design optionsl In-line designl Self primingl Gas handlingl Standard to EN 734l Soft packingl Single mechanical seall Magnetic couplingl Barrel designl Close coupled version

Product ranges

SIHI

AOL AKL AOPALMAOH AKH AEH ADH ASH

SIDE CHANNEL

HORIZONTAL WITH NPSH INDUCER


Features & design optionsl Low NPSH inducerl Self primingl Gas handlingl Standard to EN 734l Soft packingl Single mechanical seal l Magnetic couplingl Barrel designl Close coupled version

Product ranges

SIHI

CEH CDH

VERTICAL


Features & design optionsl Self primingl Gas handlingl Soft packingl Single mechanical seall Magnetic couplingl Close coupled versionl Vertical electric motor

Product ranges

SIHI

DRV AKV

VERTICAL

Maximum performanceFlow rate: 72,000 m3/h 316,800 USgpmHead: 2100 m 6900 ftTemperature: 232 ºC 450 ºFPressure: 40 bar 580 psiSpeed: 3600 rpm

Features & design optionsl Vertical multi-stage pump with

closed impellerl Wet installationsl Axial thrust is absorbed by an

adequately sized, deep grooveball bearing or by balancing of the impellers

l Motor stool for mounting standard flanged motors

l Renewable diffusers, case wearrings and shaft sleeves

l Standard materials

Product ranges

SIHI

MSV MIR CBS-VR DBS-VR

11

MULTI-STAGE


Features & design optionsl Horizontal multi-stage pump with

closed impellerl Renewable diffusers, case wear rings

and shaft sleevel Hydraulic balance of axial thrustl Standard and special materials

HORIZONTAL

Product ranges

SIHI HALBERG

MultiMSL MSN MSH MSM

ZEA HESHOHDVHM

HORIZONTAL SELF PRIMING


Features & design optionsl Horizontal multi-stage pump with

NPSH inducer stagel Axial thrust is compensated by a

single balance disc and counter discl Soft packingl Mechanical seall Magnetic couplingl Standard materials

Product ranges

SIHI

TKHTLHUEAUEH

12

MULTI-STAGE

Maximum performanceFlow rate: 2270 m3/h 10,000 USgpmHead: 760 m 2500 ftTemperature: 82 ºC 180 ºFPressure: To fit the applicationSpeed: 3600 rpm

Features & design optionsl Vertical line-shaftl Deep welll Wet pitl Closed impellerl Radial impellerl Mixed flow impellerl Vertical electric motorl Diesel engine with right angle gearboxl Soft packingl Mechanical seall Standard and special materials

DEEP WELLMEDIUM FLOW

Maximum performanceFlow rate: 100 m3/h 440 USgpmHead: 171 m 562 ftTemperature: 60 ºC 140 ºFPressure: PN25Speed: 3000 rpm

Features & design optionsl Vertical single stage and multi-stagel Closed impellerl Axial impellerl Vertical electric motorl Variable speed drivel Magnetic couplingl Standard and special materials

Product ranges Product ranges

SIHI

CEB ZEB

HIGH FLOW

Maximum performanceFlow rate: 100,000 m3/h 440,000 USgpmHead: 100 m 328 ftTemperature: 80 ºC 176 ºFPressure: To fit the application

Speed: 1500 rpm

Features & design optionsl Vertical single stage and multi-stagel Wet pitl Closed or semi-open radial or

mixed flow impellerl Axial impellerl Vertical electric motorl Variable speed drivel Variable pitchl Soft packingl Mechanical seall Standard and special materials

Product ranges

HALBERG

RTRARK

HALBERG

MIR

13

PITOT TUBE PUMPS


Features & design optionsl Single stage pitot tube pumpl Low flow, high pressurel Pulsation-free flow with stable

NPSHR curvel Exchangable stationary wing-shaped

pitot tube, single or double, placed inside the rotor

l Conforms to API 610 (oil lubricated version)

Product ranges

SIHI

CombitubeCWHC 1 (Grease)CWHC 2 (Oil)

HYGIENIC PUMPS

Maximum performanceFlow rate: max. 200 m3/hHead: max. 85 mTemperature: 130 ºC or 90 ºCPressure: PN16Speed: max. 3000 rpm or 1500 rpm

Features & design optionsl Hygienic volute casingl Stainless steel casingl Quick release clamp ringl Sanitary grade O-ring seall All processes wetted - parts to AISI316Ll Self priming side channel optionl Food grade standards / 3A1l Surface roughness Ra≤ 3.2 µm

Product ranges

SIHI

NHKSHK

PITOT TUBE, HYGIENIC, GEAR PUMPS

VOLUMETRIC GEAR PUMPS

Product ranges

SIHI

GearPlusRRNRLN

Maximum performance

Capacity: max. 70 m3/hDifferential pressure: max. 16 barSpeed: max. 1750 rpmSuction lift:

- priming max. 0.5 bar vacuum- pumping max. 0.8 bar vacuum

Temperature: max. 250 ºCVelocity: max. 75,000 mm2/s

Features & design optionsl Horizontal gear pumpsl Internal idler gear in mesh with main rotorl Provides favourable flow conditionsl Superior self priming capabilityl Pumps high viscous liquidsl Modular designl Can be provided with a relief valve to

prevent build-up of excess pressure

14

GAS EJECTORSTWO STAGE

Product ranges Product rangesProduct rangesSIHI

LPH-X ExtruvacLPH LEMELEM LEL LEH LOH SL

SIHI

LPH-X SterivacLPH LEMSLOH LEH

SIHI

GPV GOV GEV

LIQUID RING VACUUM LIQUID RING VACUUM COMPRESSORS

MULTI STAGESINGLE STAGEROOTS BLOWER(LOBULAR BOOSTER)

Product ranges Product rangesProduct ranges

SIHI

WNM

SIHI

LOH LPH-XLPH KPH

SIHI

KPH KSH KLH

15 16

Maximum performanceSuction capacity: ≤ 7500 m3/h

≤ 4400 acfmOperating pressure: ≥ 4 mbar

≥ 3 torr

Features & design optionsl Operates efficiently with liquid ring

vacuum pumpsl Utilises pumped gasesl Standard and special materials

Maximum performanceSuction capacity: ≤ 10,000 m3/h


≥ 25 torr

Features & design optionsl Evacuation of gases and vapoursl Ability to handle entrained liquidl Soft packingl Mechanical seal (single or double)l Magnetic couplingl Protection against cavitationl Material optionsl Central drainl ANSI or ISO specificationsl Standard and special materialsl Special applications



≥ 25 torr

Features & design optionsl Evacuation of gases and vapoursl Ability to handle entrained liquidl Mechanical seal (single or double)l Soft packingl Magnetic couplingl Protection against cavitationl Central drainl ANSI or ISO specificationsl Standard and special materialsl Close coupled versionsl Special applications


≤ 17,600 USgpmOperating pressure: ≥ 1 mbar abs

≥ 1.45-2 psia

Features & design optionsl Ability to handle large gas and

vapour flows l Low suction pressures in the medium -

high and low course vacuuml Ability to operate as the final stage with

liquid vacuum pump setsl Leakage rate below 10-3 mbar ·I·s -1


≤ 5900 scfmOperating pressure: ≤ 1.5 bar

≤ 22 psig

Features & design optionsl Compression of gases and vapoursl Soft packingl Mechanical seal (single or double)l Magnetic couplingl ANSI or ISO specificationsl Standard and special materials


≤ 850 scfmOperating pressure: ≤ 15 bar

≤ 218 psig

Features & design optionsl Compression of gases and vapoursl Soft packingl Mechanical seal (single or double)l ANSI or ISO specificationsl Standard and special materials

SINGLE STAGE

DRY RUNNING VACUUM MIXERS

DRY-RUNNINGVACUUM (H SERIES)

DRY-RUNNINGVACUUM (M SERIES)

Product ranges Product ranges

SIHI

DryM160

SIHI

DryH250 H400H750 H1000

Maximum performanceSuction volume: ≤ 180 m3/h

≤ 107 acfmOperating pressure: ≥ 0.1 mbar abs

≥ 1.45-3 psiaEnd pressure <0.5 mbarPower comsumption at end pressure ≤ 5.0 kWSound level - DIN 63 dB(A)

Features & design optionsl Totally dry - No consumption or

disposal of operating and lubricating fluids

l Up to 20,000 hours operationwithout pump maintenance

l Easily and quickly maintained l Fail-safe operation under

upset conditionsl No mechanical shaft seals requiredl Variable speed driverl Real time operating control

and monitoringl Self diagnosing controll Suitable for areas with explosion

hazardsl T3 temperature limitl Compact, integrated construction


≤ 594 acfmOperating pressure: ≥ 0.001 mbar abs

≥ 1.45-5 psiaEnd pressure <0.01 mbarPower consumption at end pressure ≤ 19.0 kWSound level - DIN 70 dB(A)

Features & design optionsl Totally dry - No consumption or

disposal of operating and lubricating fluids

l Up to 20,000 hours operationwithout pump maintenance

l Easily and quickly maintained l Fail-safe operation under

upset conditionsl No mechanical shaft seals requiredl Variable speed driverl Real time operating control

and monitoringl Self diagnosing controll T3 or T4 temperature limitl Suitable for areas with explosion

hazardsl Customised designl Electronic monitoring

ENGINEERED SYSTEMS

SLUDGE MIXERS

Product ranges

HALBERG

MFS

Maximum performanceFlow rate: 7200 m3/h

31,680 USgpmDigester tank vol.: 20,000 m3

5.3 Mio. US gal.

Temperature: 60 ºC 140 ºF

Speed: 1500 rpmRotation: CW & CCW

Features & design optionsl Verticall Screw type impellerl Non-cloggingl Gas tight lip seal systeml Automatic grease pumpl Combined thrust and guide bearingl Splash diskl Ductile cast iron

LIQUID SYSTEMS

MEMBRANESYSTEMS

VACUUM AND COMPRESSOR SYSTEMS

Product ranges Product rangesProduct ranges

SIHI

ModularPLN PK PLGPN PL

SIHI

PLM PKM PKLMPM

SIHI

UNIP

Maximum performance

Capacity: on request

Discharge pressure: on request

Features & design optionsPre-assembled packages including:l Collectorsl Condensation vessels suction sidel Pressurised and/or heated vesselsl (Ex) instrumentation for control of

temperature, pressure, level, …l Filter systemsl Dosing systemsl pH regulation systeml Pneumatic systemsl Heat exchangersl Junction boxesl Control panell Common base plate for easy connection

to the process and utilitiesl Engineering standards comply with

local requirements

Maximum performanceSuction capacity: on requestRecovery rate: >99%Outlet concentrations: Acc. European

clean air regulations

Features & design optionsl Purification and recovery of VOC

from exhaust gasl Gas dryingl Monomer recovery


≤ 8800 acfmSuction pressure: ≥ 0.1 mbar

≥ 1.45-3 psia≥ 0.075 torr

Discharge pressure: ≤ 9 bar≤ 96 psig

Features & design optionsl Standard packagesl Hybrid packagesl Liquid ring vacuum packagesl Liquid ring compressor packagesl Multi-stage packages including:

- Liquid ring vacuum pumps- Gas ejectors- Steam ejectors- Mechanical boosters- SIHIdry

l Single source supplyl ANSI, ISO, DIN and nuclear standardsl Increased performance range available

through hybrid engineered systemsl Completely assembled with

- Vessel, filter and heat exchanger- Valves, instrumentation and piping- Junction box, electric panel,

PLC Suction

17 18

www.sterlingfluidsystems.com

Europewww.sterlingfluidsystems.com/europe

Americaswww.sterlingfluidsystems.com/americas

Asiawww.sterlingfluidsystems.com/asia

28

Sterling Fluid Systems (Austria)Wien

Telephone: +43 (0)1 680 050Fax: +43 (0)1 680 0521

E-Mail: [email protected]

Sterling Fluid Systems (France)Trappes

Telephone: +33 (0)1 34 82 39 00Fax: +33 (0)1 34 82 39 61


Sterling Fluid Systems (Greece)Athens

Telephone: +30 (0) 210 957 07 83Fax: +30 (0) 210 956 81 21


Sterling Fluid Systems (Netherlands)Beverwijk

Telephone: +31 (0)251 263 232Fax: +31 (0)251 226 309


Sterling Fluid Systems (Schweiz)Schaffhausen

Telephone: +41 (0)52 6440606Fax: +41 (0)52 6440616


Sterling Fluid Systems (Belgium)Groot-Bijgaarden

Telephone: +32 (0)2 481 7711Fax: +32 (0)2 481 7737


Sterling SIHI (Germany)Itzehoe

Telephone: +49 (0)4821 77101Fax: +49 (0)4821 771274


Sterling Fluid Systems (Hungary)Veszprém

Telephone: +36 (0)88 40 66 33Fax: +36 (0)88 40 66 35


Sterling Fluid Systems (Polska)Warszawa

Telephone: +48 (0) 22 335 24 80/81Fax: +48 (0) 22 335 24 82


Sterling Fluid Systems (Spain)Madrid

Telephone: +34 91 709 1310Fax: +34 91 715 9700


Sterling Fluid Systems (Czech Republic)Olomouc

Telephone: +420 68 551 6651Fax: +420 68 551 66 53


Sterling SAT (Germany)Dägeling/Holstein

Telelphone: +49 (0) 4821 9000-0Fax: +49 (0) 4821 9000-501E-Mail: [email protected]

Sterling Fluid Systems (Italy)Monza, Milan

Telephone.:+39 (0) 39 28 241Fax: +39 (0) 39 2824 220


Sterling Fluid Systems (Romania)Bucuresti

Telephone: +40 (0) 21 610 7188Fax: +40 (0) 21 210 8287


Sterling Fluid Systems (UK)Altrincham/Cheshire

Telephone: +44 (0)161 9286371Fax: +44 (0)161 9252129


SIHI Pumps (USA)Grand Island

Telephone: (1) 716 773 6450Fax: (1) 716 773 2330E-Mail:[email protected]

Sterling PCU (USA)Dayton

Telephone: (1) 937 299 5594Fax: (1) 937 299 3843


SIHI Pumps (Canada)Guelph

Telephone: (1) 519 824 4600Fax: (1) 519 824 7250E-Mail: [email protected]

Sterling Fluid Systems (Singapore)Singapore

Telephone: (65) 6562 8300Fax: (65) 6562 8308


Sterling Fluid Systems (Malaysia)Selangor Darul Ehsan,

Telephone: (60) 3 5885 0331Fax: (60) 3 5885 0337

E-Mail:[email protected]

SIHI (Australia)Bayswater

Telephone: (61) 3 9720 1500Fax: (61) 3 9720 4076


Sterling Fluid Systems (Thailand)Bangkok

Telephone: (66-2) 319 2567Fax: (66-2) 319 2573/4


Sterling Fluid Systems (China)Shanghai

Telephone: (8621) 6218 8068Fax: (8621) 6217 8086


Sterling Fluid Systems (Taiwan) Taipei

Telephone: (886) 2 8631 2138Fax: (886) 2 8631 2184


Application & Products - Pump Guide

Documents

Transcript of Application & Products - Pump Guide