APPLICATION EXAMPLES LIBRARY · Poka Yoke controllers. Target torques: 20Nm, 80Nm, 180 Nm....
Transcript of APPLICATION EXAMPLES LIBRARY · Poka Yoke controllers. Target torques: 20Nm, 80Nm, 180 Nm....
Sizes
Y-56E-JQ, Y-140JQ and YX-3000J impulsetools. All controlled by YTC-3 Poka Yoke controllers.
Target torques:
20Nm, 80Nm, 180 Nm.
Tightening applications on:
Pre-tightening of anchor-bolts and final tightening of
anchor bolts.Three YTC-3 controllers built in
into one controller cabinet.
Advantages for this customer:
Both in pre-tightening stage as well as in final tightening, the customer needs to
have assurance that all bolts are tightened evenly. The YTC-3 Poka Yoke controller is counting every bolt as it is tightened to its
target torque.
Due to the low levels of reaction forces, the target torque of final tightening can be reached with handheld impulse wrenches. No additional supports are needed, which
keeps the workstation flexible.
Conclusions
• Zero Fault Production• Flexible and fast assembly
In use by:
Assembly site for manufacturing of wind-turbines, Germany
APPLICATION EXAMPLES LIBRARY
NEWSBULLETIN NR. 5 08 - 05 - 2009
T O R Q U E - C O N T R O L L E D I M P U L S E T O O L S