application electrical Signage · panel over the message panel to protect lettering. •Exterior...
3
Signage LAS Single-Face LED Signage application • LED back-lit single-face LED sign. LED light source provides virtually maintenance-free operation. Black, red or green letters on a white (or black) background, or in a “disappearing” version where the illuminated red letters remain hidden when the sign is off. construction/finish • 3" deep extruded aluminum housing with mitered corners. • Back plate is formed from 0.050" aluminum and adds 0.25" to the overall depth of the sign. lamps • LED light source provides low energy consumption. • Message panel is back-lit with solid state LED panel with integral driver. • Low 9W operating cost. mounting • Four (4) mounting holes on the back plate. • Optional mounting accessories available. • 7/8" knockout for electrical connection. • Body of the sign hooks onto the back plate and is locked into place with two screws. electrical •Available for 120 and 277 volt applications. • The sign draws 9 watts and 0.42 Amps (120V). • UL and CUL listed for wet locations. faceplate • Message panels are 0.125" thick, translucent acrylic with stencil cut applied vinyl graphics. • Additional 0.125" thick, clear acrylic exterior face panel over the message panel to protect lettering. • Exterior panel for “disappearing” version tinted to hide the message when the sign is off. • All panels securely captured within the sign frame. • Twenty-six (26) standard messages with additional custom messages available upon request. warranty • All luminaire components are warranted for 5 years from original date of shipment. Project Type Model No. Comments Specifier’s Reference LAS Sample Model No.: LAS - 120 - RW - TO EXIT - CMB – – – – LAS – Single-face LED sign BW – Black letters on a white background RW – Red letters on a white background GW – Green letters on a white background DS 1 – Disappearing sign, red letters on a black background Series Sign Panel Color 120 – 120V 277 – 277V ALERT BEAM ON CAUTION X-RAY DANGER LASER IN USE DARK ROOM IN USE DO NOT ENTER DRY ROOM IN USE ELEVATORS EXAM ROOM IN USE FIRE DO NOT ENTER IN USE LADIES LASER IN USE LASER ON MEN OCCUPIED RADIATION ON READY RECORDING RESTROOMS ROOM IN USE SYSTEM READY TELEPHONE TO EXIT WOMEN X-RAY IN USE RFR – Recessed frame CMB – Ceiling mount bracket SMB – Side mount bracket PMB – Pendant mount bracket FLASH – Message flashing (60 times/min.) Voltage Message Options 1 Message is only visible when sign is illuminated. The sign panel appears black in off condition. Footnotes:
Transcript of application electrical Signage · panel over the message panel to protect lettering. •Exterior...
Signage LAS
Single-Face LED Signage
application•LED back-lit single-face LED sign. LED light source
provides virtually maintenance-free operation. Black, red or green letters on a white (or black) background, or in a “disappearing” version where the illuminated red letters remain hidden when the sign is off.
construction/finish•3" deep extruded aluminum housing with mitered
corners.
•Back plate is formed from 0.050" aluminum and adds 0.25" to the overall depth of the sign.
lamps•LED light source provides low energy consumption.
•Message panel is back-lit with solid state LED panel with integral driver.
•Low 9W operating cost.
mounting•Four (4) mounting holes on the back plate.
•Optional mounting accessories available.
•7/8" knockout for electrical connection.
•Body of the sign hooks onto the back plate and is locked into place with two screws.
electrical•Available for 120 and 277 volt applications.
•The sign draws 9 watts and 0.42 Amps (120V).
•UL and CUL listed for wet locations.
faceplate•Message panels are 0.125" thick, translucent acrylic
with stencil cut applied vinyl graphics.
•Additional 0.125" thick, clear acrylic exterior face panel over the message panel to protect lettering.
•Exterior panel for “disappearing” version tinted to hide the message when the sign is off.
•All panels securely captured within the sign frame.
•Twenty-six (26) standard messages with additional custom messages available upon request.
warranty•All luminaire components are warranted for
5 years from original date of shipment.
Project
Type
Model No.
Comments
Specifier’s Reference
LAS
Sample Model No.: LAS - 120 - RW - TO EXIT - CMB
– – – –
LAS – Single-face LED sign BW – Black letters on a white background
RW – Red letters on a white background
GW – Green letters on a white background
DS1 – Disappearing sign, red letters on a black background
Series Sign Panel Color
120 – 120V 277 – 277V
ALERTBEAM ONCAUTION X-RAYDANGER LASER IN USEDARK ROOM IN USEDO NOT ENTERDRY ROOM IN USEELEVATORSEXAM ROOM IN USEFIRE DO NOT ENTERIN USELADIESLASER IN USE
LASER ONMENOCCUPIEDRADIATION ONREADYRECORDINGRESTROOMSROOM IN USESYSTEM READYTELEPHONETO EXITWOMENX-RAY IN USE
RFR – Recessed frameCMB – Ceiling mount bracketSMB – Side mount bracketPMB – Pendant mount bracketFLASH – Message flashing (60 times/min.)
Voltage Message Options
1 Message is only visible when sign is illuminated. The sign panel appears black in off condition.
Footnotes:
dimensions
message options
LAS Single-Face LED Signage
Contact Factory for Additional Configurations.Specifications are subject to change without notice.
Some luminaires use fluorescent or high intensity discharge (HID) lamps that contain small amounts of mercury. Such lamps are labeled, “Contain Mercury” and/or the symbol “HG”. Lamps that contain mercury must be disposed of in accordance with local requirements. Information regarding lamp recycling and disposal can be found at www.lamprecycle.org
©2012 Philips VistaAll rights reserved.Rev. 01/12
11500 Melrose Avenue Franklin Park, IL 60131p.800.576.2135•f.800.576.2136www.vistalighting.com
Front View Side View
RW - Red Letters on White Sign Panel
GW - Green Letters on White Sign Panel
DS - Disappearing Signage, Red Letters on Black Panel
BW - Black Letters on White Sign Panel
Back View
LASERON
BEAMON
TOEXIT
CAUTIONX-RAY
X-RAYIN USE
RADIATIONON
DO NOTENTER
LASERIN USE
ROOMIN USE
SYSTEMREADY
DRYROOMIN USE
DANGERLASERIN USE
EXAMROOMIN USE
FIREDO NOTENTER
ALERT
IN USE LADIES
MEN
WOMEN
READY
ELEVATORS
OCCUPIED RECORDING RESTROOMS
DARKROOMIN USE
TELEPHONE
Note: Dimensional data for all of the mounting options can be found on theextendedspecificationsheetonlineatwww.vistalighting.com
8"(203.2mm)
11"(279.4mm)
1-1/4"(31.8mm)
5-1/2"(139.7mm)
4"(101.6mm)
1-1/2"(38.1mm)
3"(76.2mm)
1/4"(6.4mm)
1-1/4"(31.8mm)
7/8" (typ.)
7/16" (typ.)X-RAYIN USE
dimensions
LAS Single-Face LED Signage
Contact Factory for Additional Configurations.Specifications are subject to change without notice.
Some luminaires use fluorescent or high intensity discharge (HID) lamps that contain small amounts of mercury. Such lamps are labeled, “Contain Mercury” and/or the symbol “HG”. Lamps that contain mercury must be disposed of in accordance with local requirements. Information regarding lamp recycling and disposal can be found at www.lamprecycle.org
©2012 Philips VistaAll rights reserved.Rev. 01/12
11500 Melrose Avenue Franklin Park, IL 60131p.800.576.2135•f.800.576.2136www.vistalighting.com
7-3/4"(196.9mm)
2"(50.8mm)
4"(101.6mm)
11"(279.4mm)
14"(355.6mm)
4-1/2"(114.3mm)
3"(76.2m
m)
2-1/4"(57.2mm)
6"(152.4mm)
40" max. (1016mm)(Can be field cut to length)
4-1/2"(114.3mm)
6"(152.4mm)
1/2" (typ.)
3/4" (typ.)
8"(203.2mm)
7-3/4"(196.9mm)
2"(50.8mm)
11/16"(17.5mm)
4"(101.6mm)
1-1/2"(38.1mm)
1-7/8"(47.6mm)
1-1/8"(28.6mm)
1-1/16"(27mm)
A B C D
A
A
A
A
A
A
B
C
C
C
C
D
D
7/16" (typ.)
B
B
RFR - Recessed Frame
PMB - Pendant Mount Bracket
CMB - Ceiling Mount Bracket SMB - Side Mount Bracket
![IS 6472 (1971): General Requirements for Tinted Ophthalmic ... · IS 6472 (1971): General Requirements for Tinted Ophthalmic Glass [MHD 5: Ophthalmic Instruments and Appliances] Title:](https://static.fdocuments.net/doc/165x107/5f5befe83083e95c2d145594/is-6472-1971-general-requirements-for-tinted-ophthalmic-is-6472-1971-general.jpg)
