APPENDIX-B5 CV06- Material Engineer APPENDIX B-5 ... Material Engineer Mohit Mohan Agrawal.pdf ·...
Transcript of APPENDIX-B5 CV06- Material Engineer APPENDIX B-5 ... Material Engineer Mohit Mohan Agrawal.pdf ·...
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
APPENDIX B-5: CURRICULUM VITAE (CV)
Proposed Position : Material Engineer
Name of Firm : Redecon (India) Pvt Ltd
Name of Staff : Mohit Mohan Agrawal
M.I.G. (Plot) No. 53
A.D.A. Colony, Near R.T.O.
Ramghat Road, Aligarh – 202 001 (U.P.)
Phone :- 0571 – 2740782, Cont.No.09896952240
Profession : Civil Engineering Date of Birth : 25 September, 1979 (Proof of age enclosed)
Years with Firm/Entity : Consent given to join Nationality : Indian
Membership of Professional Societies: - Member, Indian Roads Congress
Detailed Task Assigned :
He will be responsible for supervising all the tests to be done in different stages of construction, besides ensuring that specified tests are done as per codal stipulations and as per the specifications laid down in the contract for all the different stages of construction. He will be coordinating and controlling the support personnel placed with him and will report to the Resident Engineer and to the Team Leader/Employer’s representative as and when required. Summary of Qualification & Experience vis-à-vis the requirements as per TOR
S. No
Name of Employer
Post Held Project Name Period Assignment in the Project
Client of the Project
Remark
From To
1 SNC LAVALIN Infrastructure Pvt Ltd
Asst. Material Engineer.
Independent consultancy of Kundli Manesar Palwal (KMP) Expressway BOT Project. Total Length:- 135.6 Km
09th August 2008
Till date.
constant checking and monitoring of testing of material, Assists TL for approval of mix designs and trial mixes. Responsible for preparing of Design mixes of GSB, WMM, Dense Bituminous Macadam, Bituminous Concrete and different grades of Concrete Mixes Responsible to monitor the contractor’s implementation of his QA/QC plans as far as testing / materials quality
Haryana State Industrial Infrastructure Development Corporation (HSIIDC).
2 SMEC India Pvt Ltd
Asst. Material Engineer.
Strengthening & Four Lanning of Existing Two Lane Section between Km 307.500 to 321.100 Of Etawah By-Pass on NH-2 in the State of
Oct 2007
Aug 2008.
-do- NHAI
3 Intercontinental
Asst. Material
Advisory Consultancy
April 2006
Oct 2007.
Check the Detailed Project Reports
Uttar Pradesh
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
S. No
Name of Employer
Post Held Project Name Period Assignment in the Project
Client of the Project
Remark
From To
Consultants and Technocrats Pvt Ltd.
Engineer.(Manager)
Services for Quality and Quantity Assurance Contract Management, Independent Checking And Technical Audit of Major Road Works in the State Of Uttar Pradesh
(DPR), preparing a quality assurance program and quality management program
Public Works Department
4 CES INDIA Ltd
Material Engineer.
Design and
Construction of
Flyover at Rajkama&
Shyam to Jaystambh
Square and Flyover
at Panchavati
Square in Amravati
City in Maharashtra
June 2005
April 2006.
Checking for all materials, equipments, quality control Approving mix designs, source of materials etc.
Maharashtra State Road Development Corporation Ltd.
5 STUP Consultants Ltd
QA/QC Engineer.
Development of Adequate Road Connectivity to Major Ports in India. Jawaharlal Nehru Port Trust in Maharashtra
May 2002
May 2005.
Checking for all materials, equipments, quality control Approving mix designs, source of materials etc.
NHAI
6 STUP Consultants Ltd.
QA/QC Engineer.
Four Laning and Strengthening of (Ratanpur- Himmatnagar Section) NH-8 Golden uadrilateral in Gujarat
Nov 2001
May 2002
Checking for all materials, equipments, quality control Approving mix designs, source of materials etc.
NHAI
7 M/s. Agrawal Constructions.
Jr. Engineer.
Strengthening, Repairing & Maintenance of State Highways & Village Roads.
July 2000
Nov 2001.
Responsible for the Supervision, Patch repairs, Potholes filling and Quality of work (Testing of Aggregate and Bitumen).
UPPWD
Education: (Proof of qualification enclosed)
• Bachelor in Civil Engineering in 2000 from Nagpur University
• Diploma in Civil Engineering in 1997 from Aligarh Muslim University
Workshop, Trainings and Seminars Attended:-
• One Day Workshop on “Concrete Roads for Urban Areas” Organized by Indian Concrete Institute, The
Institution of Engineers and Builders Association of India on 2nd August 2003.
• One Day Seminar on “Why Roads Don’t Like Manson” Organized by Maharashtra Economic Development
Council and Maharashtra State Road Development Corporation on 16th September 2003.
• One Day Seminar on “What Ails Asphalt Roads” Organized by The Institution of Engineers (India) on 13th
December 2003.
• Two Days Workshop on “Concrete Mix Design and Testing” Organized by Ambuja Cement Ltd on 2nd & 3rd
September 2004.
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
• Two Days Workshop on “Advance Concrete Mix Design and Testing” Organized by Ambuja Cement Ltd on
28th & 29th October 2004.
Key Qualifications:
Graduate in Civil Engineering with above 14 years of professional experience in Roads and other Civil Engineering
projects i.e. Bridges. Responsible for formulation of Quality Assurance System (QAS), which included Technical
Specifications, acceptance criteria, frequency of tests, etc. for each project and ensured its implementation.
Responsible for identification of borrow areas and quarries, testing of soil, fly ash, aggregates and construction materials,
analysis of their results and their interpretation for suitability for construction of embankments, sub-grade, granular sub-
base, wet mix macadam, bituminous macadam, dance bituminous macadam, semi dance bituminous concrete,
bituminous concrete and maintenance of test data and results in a systematic manner. Also a good experience in
establishment of materials laboratory, calibration of its equipment, imparting training to staff in testing of
materials, quality control techniques, etc. Also responsible for design of flexible road pavements, bituminous,
concrete and other mixes, preparation of Job Mix Formula (JMF).
Undertook various highway’s and bridge projects including externally funded projects. In various capacities, was
responsible for supervising contractor’s laboratories and ensuring that the same were fully equipped with latest testing
equipments, carried out calibration of their equipments, plants and ensured that qualified and experienced staff employed
in the laboratory and they carried out their duties as per the requirements of their projects. Also carried out field testing
of materials, quality control of materials and works at various stages of their execution using modern pavement
construction technology, analysis and interpretation of test results, geotechnical investigations for foundation of bridges
and embankments, etc. carried out independent tests of materials and completed works and was responsible for their
acceptance or rejection. Also has good experience of Rigid Pavement.
EMPLOYMENT RECORD:
Employer: SNC LAVALIN Infrastructure Pvt Ltd
Position held: Asst.Material Engineer.
Period: 09th August 2008 to Till date.
Project: Independent consultancy of Kundli Manesar Palwal (KMP) Expressway BOT Project.
Total Length:- 135.6 Km.
Client: Haryana State Industrial Infrastructure Development Corporation (HSIIDC).
Concessionaire :- KMP Expressways.
EPC Contractor :- DS Constructions.
Cost of Project :- 2000 crores
Duties performed: Responsible to Team Leader, some of the responsibilities are as under: Responsible for constant checking and monitoring that the required frequency of testing is being done by the contractor. Responsible for carrying out periodic testing, as a check on contractor’s work. Responsible for ensuring that test methods are followed correctly by the contractor as set out in the various specifications for testing of materials in use on the project. Responsible for ensuring all equipments are in good working condition and is calibrated at the required intervals and that the contractor abides by his contractual obligations in this regard. Responsible for drawing to TL attention any matters of concern concerning materials/ testing and to draft letters/ site instruction for issue by TL. Responsible for ensuring that the contractor maintains orderly registers, laboratory records, reports, work sheets etc. Assists TL for approval of mix designs and trial mixes. Responsible for checking that manufactured materials (pipes, cement, bitumen, steel, Fly ash etc.) delivered to site are approved (periodic independent checks/ tests). Responsible for preparing of Design mixes of GSB, WMM, Dense Bituminous Macadam, Bituminous Concrete and different grades of Concrete Mixes Responsible to monitor the contractor’s implementation of his QA/QC plans as far as testing / materials quality is concerned. Employer: SMEC India Pvt Ltd. An ISO 9001-2000 Company.
Period: 08th October 2007 to 08th August 2008.
Project: Balance Work of Strengthening & Four Lanning of Existing Two Lane Section between Km 307.500
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
to 321.100 Of Etawah By-Pass on NH-2 in the State of
Uttar Pradesh.
Total Length :- 13.90 Km.
Client: National Highways Authority of India (NHAI), (NHAI Funded).
Contractor :- PNC- Constructions Co Limited.
Cost of Project 145 crores.
Position held: Asst.Material Engineer.
Duties performed: Responsible to Material Engineer (ME). Acts in ME’s position if ME is absent. Assists in all of the
ME’s duties/ responsibilities as required, as directed, some of the responsibilities are as under:
To liaise, coordinate and cooperate with Resident Engineer (RE) and Material Engineer (ME) on materials/ testing
matters. Responsible for constant checking and monitoring that the required frequency of testing is being done by the
contractor. Responsible for carrying out periodic testing, using own staff, as a check on contractor’s testing. Responsible
for ensuring that test methods are followed correctly by the contractor/ own staff as set out in the various specifications
for testing of materials in use on the project. Responsible for the Laboratory Technicians/ Lab Assts under direct control,
Assign tasks, that includes filing, sampling/ testing. Responsible for ensuring all equipments are in good working
condition and is calibrated at the required intervals and that the contractor abides by his contractual obligations in this
regard. Responsible for drawing to TL’s, RE’s/ ME attention any matters of concern concerning materials/ testing and to
draft letters/ site instruction for issue by TL’s, RE’s/ ME. Responsible for ensuring that the contractor maintains orderly
registers, laboratory records, reports, work sheets etc. Assists ME for approval of mix designs and trial mixes after
discussion with TL and RE’s. Responsible for checking that manufactured materials (pipes, cement, bitumen, steel etc.)
delivered to site are approved (periodic independent checks/ tests). Responsible to monitor the contractor’s
implementation of his QA/QC plans as far as testing / materials quality is concerned.
Employer: Intercontinental Consultants and Technocrats Pvt Ltd. (ICT).An ISO 9001-2000 Company.
Position held: Asst.Material Engineer.(Manager)
Period: 17th April 2006 to 07th October, 2007.
Project: Advisory Consultancy Services for Quality and Quantity Assurance Contract Management,
Independent Checking And Technical Audit of Major Road Works in the State Of Uttar Pradesh.
Total Length :- 188.50 Km.
Client: Uttar Pradesh Public Works Department, World Bank Funded
Contractor:- Unitech Limited, KNR Infrastructure Ltd.
Cost of Project :- 200 crores.
Duties performed: Responsible for the following:
Check the Detailed Project Reports (DPR) prepared by the UPPWD for each road. Check the UPPWD/ Contractor’s
Laboratories and equipment for adequacy for the required testing. Assist UPPWD in preparing a quality assurance
program and quality management program to ensure work is carried out to the prescribed standards and specifications.
Formulate guidelines of the quality assurance system. Monitoring the quality of works and providing advisory services to
UPPWD when required. Assist in approval of materials and quarries. Monitor the works carried out as per specifications
and standards and to suggest remedial measures as and when required. Checking of job mix design for various items of
works when required by UPPWD. Checking the calibration of contractors test equipment and also to ensure contractor
lab is fully equipped with required test equipment and staff is qualified and experienced to carry out the work. Carryout
test to check the tolerance limit for each item of activities as per scope of the services. To carryout part check of the
measurement of the works as per scope of the services. Assist in checking the bills submitted by the contractors and in
checking quantities of estimates. Prepare Inception Report, Monthly Progress Reports, Quarterly Reports, Quality
Verification Reports, and Inspection Reports etc. Prepare Monthly Invoices.
Employer: CES INDIA Ltd. An ISO 9001-2000 Company.
Position held: Material Engineer.
Period: 01th June 2005 to 16th April 2006.
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
Project: Design and Construction of Flyover at Rajkamal &
Shyam to Jaystambh Square and Flyover at Panchavati
Square in Amravati City in Maharashtra State. Total Length :- 1st Flyover is 3.0 Km and 2nd
Flyover is 1.5 Km.
Client: Maharashtra State Road Development Corporation Ltd.
Contractor:- Gammon India Ltd.
Cost of Project:- 35 crores.
Duties performed: Responsible for all quality and testing related to work.
• Aggregates – Gradation, Water absorption, Specific gravity, Aggregate impact value, Loss Angels abrasion value
test, Elongation & Flakiness index.
• Sand – Gradation of Sand, Zoning of Sand, Fines modulus, Silt content, Specific gravity, Water absorption.
• Concrete – Compressive Strength of Cubes, Slump cone test, Steel testing, Mix Design of concrete, Cement
testing, Water testing, Admixture testing, Supervision of Concreting at site.
• Design Mixes – Design of Concrete mixes i.e. M15, M20, M25, M30, M35, and M40
• Calibration – Calibration of Cement concrete plant.
• Calibration of U.T.M Approvals –
• Giving approvals to the mix designs, approving the source, approving the materials i.e.cement, aggregates, sand,
admixtures & steel. Giving quality certificate in the Measurement Book.
• Above all Tests, Sampling, Designing, Calibration done as per M.O.R.T.H. Specification, I. R. C. and I .S. Codes.
• Above all this coordination with SRE & MSRDC peoples.
Employer: STUP Consultants Ltd. An ISO 9001-2000 Company.
Position held: QA/QC Engineer.
Period: 24th May 2002 to 31ST May 2005.
Project: Development of Adequate Road Connectivity to Major Ports in India. Jawaharlal Nehru Port Trust
in Maharashtra State of NH-4B and NH-4.
Total Length :- 30 Km
Client: National Highway Authority of India (NHAI) (ADB Loan Assistance)
Contractor:- Thakur-Mhatre-Unity (JV)
Cost of Project:- 155 crores.
Duties performed: Responsible for all testing work related to Highways.
• Earthwork - Grain Size analysis, Liquid limit & Plastic limit, Free Swelling Index, Proctor test (Standard / Modified)
with light & heavy compaction, Field Dry Density test, Lab California Bearing Ratio Indian & American method,
Calibration of sand, Supervision of Earth Work at Site.
• Aggregates – Gradation, Water absorption, Specific gravity, Aggregate impact value, Loss Angels abrasion value
test, Elongation & Flakiness index.
• Sand – Gradation of Sand, Zoning of Sand, Fines modulus, Silt content, Specific gravity, Water absorption.
• Concrete – Compressive Strength of Cubes, Slump cone test, Steel testing, Mix Design of concrete, Cement
testing, Water testing, Supervision of Concreting at site.
• Bitumen – Penetration test, Ductility, Softening point test, Specific Gravity, Stripping test.
• Asphalting work – Laying of Prime Coat & Tack Coat, Lab & Field Density of BM, DBM, BC, and Mastic Asphalt.
• Sampling – Sampling of all materials from Site & Borrow area.
• Design Mixes – Design of Granular Sub Base (Upper & Lower G. S. B.).
• Design of Wet Mix Macadam,
• Design of Bituminous Macadam as per Asphalt Institute Manual MS-2,
• Design of Dense Bituminous Macadam as per Asphalt Institute Manual MS-2,
• Design of Bituminous Concrete as per Asphalt Institute Manual MS-2.
• Design of Mastic Asphalt.
• Design of Concrete mixes i.e. M15, M20, M25, M30, M35, M40, M45, PQC & DLC
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
• Calibration of Plant – Calibration of W. M. M. plant,
• Calibration of Hot mix plant,
• Calibration of Cement concrete plant.
• Above all Tests, Sampling, Designing, Calibration done as per M.O.R.T.H. Specification, I. R. C. and I .S. Codes.
Employer: STUP Consultants Ltd. An ISO 9001-2000 Company.
Position held: QA/QC Engineer.
Period: 27th Nov 2001 to 23rd May 2002
Project: Four Laning and Strengthening of (Ratanpur-
Himmatnagar Section) NH-8 Golden Quadrilateral in Gujarat State.
Total Length :- 55 Km
Client: National Highway Authority of India (ADB Funded)
Contractor:- MCB - IRB ( JV )
Cost of Project:- 150 crores.
Duties performed: Responsible for all testing work related to Highways.
• Earth work - Grain Size analysis, Liquid limit & Plastic limit, Free Swelling Index, Proctor test (Standard / Modified)
with light & heavy compaction, Field Dry Density test, Lab California Bearing Ratio, Calibration of sand, Supervision
of Earth Work at Site.
• Aggregates – Gradation, Water absorption, Specific gravity, Aggregate impact value, Loss Angels abrasion value
test, Elongation & Flakiness index.
• Sand – Gradation of Sand, Zoning of Sand, Fines modulus, Silt content, Specific gravity, Water absorption.
• Concrete – Compressive Strength of Cubes, Slump cone test, Steel testing, Mix Design of concrete, Cement
testing, Water testing.
• Sampling – Sampling of all materials from Site & Borrow area.
• Design Mixes – Design of Granular Sub Base (Upper & Lower G. S. B.)
• Design of Cement Treated Aggregate Base,
• Design of Wet Mix Macadam,
• Design of Concrete mixes i.e. M15, M20, M25, M30, and M35
• Calibration of Plant – Calibration of W. M. M. plant,
• Calibration of C. T. A. B. plant,
• Calibration of Cement concrete plant.
• Above all Tests, Sampling, Designing, Calibration done as per M.O.R.T.H. Specification,
• R. C. and I .S. Codes.
Employer: M/s. Agrawal Constructions.
Position held: Jr. Engineer.
Period: 04th July 2000 to 25th Nov 2001.
Project: Strengthening, Repairing & Maintenance of State
Highways & Village Roads.
Client: U.P. P.W.D.
Duties performed: Responsible for the Supervision, Patch repairs, Potholes filling and Quality of work (Testing of
Aggregate and Bitumen).
Languages:
Read Write Speak
English Excellent Excellent Excellent
Hindi Excellent Excellent Excellent
Urdu Excellent Excellent Excellent
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
Summary of Qualification & Experience vis-à-vis the requirements as per TOR
Requirements as per TOR (Enclosure-B)
Possessed by the Staff Member
Break-up of experience
Brief Description of project Man-months
provided
(1) Essential Qualifications. (a) Graduate in Civil Engineering from a recognized University. (b) Professional Experience of 12 years in construction of Highways / Roads / Airfield Runways (c) Experience of 5 years in similar capacity in Construction / Construction Supervision of Highway projects. (d) Experience as Material / Geotechnical Engineer in Construction/Construction Supervision of at least 2 Highway projects. (e) Must be familiar with material property of road construction material, technical specifications and procedures of material tests and testing equipment’s. (f) Not more than 65 years of age. (2) Preferential Qualifications. (a) Post Graduate Degree in Geo-Technical Engineering/Soil Mechanics and Foundation Engineering. (b) Abroad experience as Material Engineer in Highway Construction projects.
(.a) Bachelor in Civil Engineering from Nagpur University (.b) above 14 years in construction of highways (.c) above 8 years as Asst. Material Engineer in construction supervision (d) experience in similar capacity in construction of Highway/Expressway projects, listed along side. (f) Familiar with construction of road materials, as worked in highway projects, listed alongside (.f) 35 years old.
Independent consultancy of Kundli Manesar Palwal (KMP) Expressway BOT Project
6 years
Balance Work of Strengthening & Four Lanning of Existing Two Lane Section between Km 307.500 to 321.100 Of Etawah By-Pass on NH-2
0.92 years
Advisory Consultancy Services for Quality and Quantity Assurance Contract Management, Independent Checking And Technical Audit of Major Road Works in Uttar Pradesh.
1.58 years
Design and Construction of Flyover at Rajkamal & Shyam to Jaystambh Square and Flyover at Panchavati Square in Amravati City in Maharashtra
0.92 years
Development of Adequate Road Connectivity to Major Ports in India. Jawaharlal Nehru Port Trust in Maharashtra State of NH-4B &NH-4.
3.08 years
Four Laning and Strengthening of (Ratanpur- Himmatnagar Section) NH-8 Golden Quadrilateral in Gujarat
0.5 years
Certification by the Candidate I, the undersigned, Mohit Mohan Agrawal, undertake that this CV correctly describes myself, my qualifications and
my experience and Employer would be at liberty to debar me if any information given in the CV, in particular the
Summary of Qualification & Experience vis-à-vis the requirements as per TOR is found incorrect. I further undertake
that I have neither been debarred by NHAI or any other central/stage government organization nor left
any assignment with the consultants engaged by Employer / contracting firm (Redecon (India) Pvt Ltd) for any
continuing work of Employer without completing my assignment. I will be available for the entire duration of the
current project “Consultancy services for Authority’s Engineer for Supervision of Improvement & Augmentation
of Karaikudi - Ramanathapuram section to 2 laning with Paved Shoulders from Km 94.000 to Km 174.000
(Existing Chainage from Km 94.000 to Km 174.000 of NH 210 including 500m on SH 35 – Madurai Road (near
Devakottai Rasta Railway Station) (Total Design Length 80.000 Km) on Engineering Procurement and
Construction (EPC) Mode under NHDP Phase-III in the State of Tamil Nadu”. If I leave this assignment in the
middle of the work, Employer would be at liberty to debar me from taking any assignment in any of the Employer
works for an appropriate period of time to be decided by the Employer. I have no objection if my services are
extended by the Employer for this work in future.
I further undertake that my CV is being proposed for this project by Redecon (India) Pvt Ltd and I have not given
consent to any other consultant(s) to propose my CV for any position for this project.
I further undertake that if due to my inability to work on this project due to unavoidable circumstances, due to which
consultant’s firm is forced to seek replacement. In such unavoidable circumstances, I shall not undertake any
employment in Employer projects during the period of assignment of this project and Employer shall consider my CV
invalid till such time.
I undertake that I have no objection in uploading/hosting of my credentials by Employer in public domain.
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
I further certify that I am associated with the following assignments as on date (as on 7 days prior to due date for
submission of proposal) including those for which LOA has been received by the firm and the inputs in these
assignments shall not affect the work of the current assignment.
Name of Assignment Client Date of LOA Likely start (Month / Year)
Likely end (Month /Year)
Total input of the Person (man-months)
N/A NA
………………………………………………………….. Date…………………………
(Signature of Key Personnel) (Day/Month/Year)
Certification by the firm
The undersigned on behalf of M/s Redecon (I) Pvt. Ltd. H-54, Kalkaji, New Delhi-110019 Ph.: 011-41605602 certify
that the qualification and experience details of Er. Mohit Mohan Agrawal as described in the CV has been checked
and found to be correct. It is also certified that Er. Mohit Mohan Agrawal to the best of our knowledge has neither
been debarred by NHAI or any other Central/State Government organization nor left his assignment with any other
consulting firm engaged by the Employer / Contracting firm (firm to be supervised now) for the ongoing projects.
We understand that if the information about leaving the past assignment is known to the Employer, Employer
would be at liberty to remove the personnel from the present assignment and debar him for an appropriate period to
be decided by the Employer.
…………………………………………………… Date : ……………… [Signature of authorised representative of the Firm] (Day/Month/Year)
*******
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd
APPENDIX-B5 CV06- Material Engineer
Authority’s Engineer of NH-210 under NHDP-II in the state of Tamil Nadu Redecon (India) Pvt Ltd