API 580 Risk Based Inspection 6 Days Training - · PDF file6Days Training Participants should...

6
6 Days Training Class Participants Participants who wish to apply for the API Exam should have at least 3 years of experience at a petro-, chemical- or industrial facility and have at least 1 year of inspectionexperience. However, participants who do not meet this requirement are also welcomed to attend this Training to further their knowledge in the related areas. E-03-07, Block E, Jalan Prima 5/3, Persiaran Prima Utama, Taman Puchong Prima, 47100 Puchong, Selangor Darul Ehsan. Tel: 03-8061-4606 Fax: 03-8061-4506 API Exam Application The scheduled dates for API 580 Certification Examination is as below: Examination Dates: _____________ Submissions to API: _____________ API 580 Risk Based Inspection Date: ______________ Venue: Kuala Lumpur Training Description The training is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The training first explains feasible means and alternatives for achieving a successful RBI program without undue complications. This training deals with RBI framework and methodology in a simple straight forward manner to establish and implement a risk- based inspection program best suited for the company objectives. Its utility is based on the premise that a few vital equipments in a process plant contribute a majority of the risk. Consequently, if these few equipments can be identified, then testing and inspection can be focused on them rather than several low-risk items. RBI helps to prioritize their equipment for inspection, optimize inspection methods and frequencies, and develop effective inspection plan commensurate with the risk contributionand equipmentcondition. TrainingObjectives Introduction to the basic concept of Risk-Based Inspection and the basis for the API 580 RBI programand methodology. Understand the purpose, scope, and examination of the critical steps in the RBI process. Overview of deterioration mechanisms and failure modes affecting the plant equipment Introduction to the risk-based inspection priority matrix and the means to utilize its results in determining inspection priorities. Introduction to the ISO-risk plot and its use, especially in combination with the risk-based inspectionsprioritymatrix Discussion of risk-based inspection documentation and record-keepingneeds. Understanding of the basic concepts of risk acceptance, risk assessment, risk perception, risk mitigationandmanagingresidualrisk . Event tree analysis, fault tree analysis, qualitative and quantitative assessment and evolution of inspectionapproaches. Understand reassessments and means for updating RBI. WhoShouldJoin Individuals who are responsible for implementing risk- based inspection programs within their own company or plant facility. Mechanical integrity, equipment reliability, and inspection personnel who are responsible for maintaining the serviceability of process plant equipment based on a cost-effectiveinspection program. MinimumRequirements Current certification as either API 510, API 570, or API653inspector. Successful completion of the supplemental inspection certification examination by at least 70%, based on fixedpass point. The objective of this optional Supplemental Inspection Certification program is to provide documented evidence of advanced (above the basic core API 510, 570, 653 examinations) knowledge and expertise in the area of Risk Based Inspection (RBI) based on the information contained inAPIRP580.

Transcript of API 580 Risk Based Inspection 6 Days Training - · PDF file6Days Training Participants should...

Page 1: API 580 Risk Based Inspection 6 Days Training - · PDF file6Days Training Participants should bring to class: a calculator, a straight edge (or triangle), pencils, highlighters, lots

6 Days Training

Class ParticipantsParticipants who wish to

apply for the API Exam should

have at least 3 years of

experience at a petro-,

chemical- or industrial facility

and have at least 1 year of

inspection experience.

However, participants who

do not meet this requirement

are also welcomed to attend

this Training to further their

knowledge in the related

areas.

E-03-07, Block E, Jalan Prima 5/3, Persiaran Prima Utama, Taman Puchong Prima,

47100 Puchong, Selangor Darul Ehsan. Tel: 03-8061-4606 Fax: 03-8061-4506

API Exam ApplicationThe scheduled dates for API 580 Certification Examination is

as below:

Examination Dates: _____________

Submissions to API: _____________

API 580 Risk Based Inspection

Date: ______________ Venue: Kuala Lumpur

Training DescriptionThe training is based on API RP 580 Risk-Based

Inspection and API Publication 581, Base Resource

Document. The training first explains feasible means

and alternatives for achieving a successful RBI program

without undue complications. This training deals with

RBI framework and methodology in a simple straight

forward manner to establish and implement a risk-

based inspection program best suited for the company

objectives. Its utility is based on the premise that a few

vital equipments in a process plant contribute a majority

of the risk. Consequently, if these few equipments can

be identified, then testing and inspection can be

focused on them rather than several low-risk items. RBI

helps to prioritize their equipment for inspection,

optimize inspection methods and frequencies, and

develop effective inspection plan commensurate with

the risk contribution and equipment condition.

Training ObjectivesIntroduction to the basic concept of Risk-Based

Inspection and the basis for the API 580 RBI

program and methodology .

Understand the purpose, scope, and examination of

the critical steps in the RBI process.

Overview of deterioration mechanisms and failure

modes affecting the plant equipment Introduction

to the risk-based inspection priority matrix and the

means to utilize its results in determining inspection

priorities.

Introduction to the ISO-risk plot and its use,

especially in combination with the risk-based

inspections priority matrix

Discussion of risk-based inspection documentation

and record-keeping needs.

Understanding of the basic concepts of risk

acceptance, risk assessment, risk perception, risk

mitigation and managing residual risk .

Event tree analysis, fault tree analysis, qualitative

and quantitative assessment and evolution of

inspection approaches.

Understand reassessments and means for updating

RBI.

Who Should JoinIndividuals who are responsible for implementing risk-

based inspection programs within their own company or

plant facility. Mechanical integrity, equipment reliability,

and inspection personnel who are responsible for

maintaining the serviceability of process plant equipment

based on a cost-effective inspection program.

Minimum RequirementsCurrent certification as either API 510, API 570, or

API653 inspector.

Successful completion of the supplemental inspection

certification examination by at least 70%, based on

fixed pass point.

The objective of this optional Supplemental Inspection

Certification program is to provide documented evidence

of advanced (above the basic core API 510, 570, 653

examinations) knowledge and expertise in the area of Risk

Based Inspection (RBI) based on the information contained

in API RP 580.

Page 2: API 580 Risk Based Inspection 6 Days Training - · PDF file6Days Training Participants should bring to class: a calculator, a straight edge (or triangle), pencils, highlighters, lots

6 Days Training

Participants should bring to class: a calculator, a straight edge (or triangle), pencils, highlighters, lots of questions, and a

“CAN-DO” attitude.

Date: ______________ Venue: Kuala Lumpur

Training Outline

Module 1

Introduction, what is RBI, scope of RBI, purpose & utility of RBI

Common definition RBI

Definition of risk, relative risk v/s absolute risk

Relationship between inspection & risk

Types of RBI assessments

Qualitative , quantitative and semi- quantitative approaches

Module 2

Planning RBI assessment

Selecting type of RBI assessment

Identifying deterioration mechanisms

Introduction to qualitative analysis

Likelihood category, consequence category

Step-by step method for qualitative analysis

Understanding the damage factors

Determine likelihood category

Determine consequence category and risk category

Preparation of risk matrix, analysis and conclusion

Module 3

Introduction to quantitative analysis

Flammable effects, Toxic effects

Business interruption effects

Estimation of release rate and post leak response

Risk evaluation, risk-weighted consequences

API 580 Risk Based Inspection

Module 4

Introduction to semi quantitative approach

Likelihood analysis, consequence analysis

Risk management post RBI analysis

Inspection strategies post RBI analysis

Module 5

Inspection effectiveness

Optimizing inspection methods and

frequencies

Risk mitigation and follow-up

Re-assessment and updating RBI

Final Quiz

Feedback and concluding Session

Codes For SaleCode books are available at Techstreet , www.techstreet.com or

Global Eng Docs , www.global.ihs.com

E-03-07, Block E, Jalan Prima 5/3, Persiaran Prima Utama, Taman Puchong Prima,

47100 Puchong, Selangor Darul Ehsan. Tel: 03-8061-4606 Fax: 03-8061-4506

Page 3: API 580 Risk Based Inspection 6 Days Training - · PDF file6Days Training Participants should bring to class: a calculator, a straight edge (or triangle), pencils, highlighters, lots

6 Days Training

Instructor

� Corrosion Assessment, Protection & Material Selection

� Condition Assessment of Structures and Components

� Welding Consultancy/Inspection/Witnessing

� Non-destructive Testing (MT, PT, UT, RT,& ET)

� Fiberscopic Inspection

� Calibration & Mechanical Testing

Ho Bee Leong

Limited Attendees

The training has limited seats up to 25 participants to ensure maximum learning and experience for all participants.

Certificate of Attendance

Every participants will receive a Certificate of Attendance bearing the signatures of the Trainer upon successful

completion of the training. This certificate is proof of the participants’ continuing professional development.

Interactive Training

The training program is designed to be interactive to ensure deeper and wider knowledge and experiences are shared

among participants and trainer. This will enhance the understanding and appreciation towards the subject matter.

Quality Training Materials

Training material will be provided based on the trainer’s notes. This material will be used throughout the training and it

will be invaluable source of reference for future use.

The personnel developing and conducting this training is Mr Ho Bee

Leong. He works in the Oil and Gas industries with related

disciplines for more than 15 years and also has more than 9 years

of experience in developing and conducting API ICP training.

Countries in which these trainings were held include Singapore,

Philippines, Indonesia and China.

He is qualified for ICP 510, 570, 580 and 653 with certificate

numbers: ICP 510 – 29563; ICP 570 – 24410 and ICP 653 – 31253.

� Asset Integrity and Risk Management Services (ARMS)

� Plant Maintenance and Engineering

� Materials Selection

� Risk-based Inspection (RBI)

� Failure Analysis

� Six Sigma (Green Belt)

� Metallurgy and Chemical Analysis

Summary of Professional Experiences:

Date: ______________ Venue: Kuala Lumpur

E-03-07, Block E, Jalan Prima 5/3, Persiaran Prima Utama, Taman Puchong Prima,

47100 Puchong, Selangor Darul Ehsan. Tel: 03-8061-4606 Fax: 03-8061-4506

API 580 Risk Based Inspection

Page 4: API 580 Risk Based Inspection 6 Days Training - · PDF file6Days Training Participants should bring to class: a calculator, a straight edge (or triangle), pencils, highlighters, lots
Page 5: API 580 Risk Based Inspection 6 Days Training - · PDF file6Days Training Participants should bring to class: a calculator, a straight edge (or triangle), pencils, highlighters, lots
Page 6: API 580 Risk Based Inspection 6 Days Training - · PDF file6Days Training Participants should bring to class: a calculator, a straight edge (or triangle), pencils, highlighters, lots

Training Package Price (RM)

Standard Price 4,950.00

Early Bird Offer 4,750.00

Team Discount for 3 or more participants 4,550.00

I agree to SPEKTRA’s payment terms and cancellation policy.

Signature: Date:

Please tick if participant require:

Hotel accommodation

REGISTRATION

Note:

To enjoy the offer, full payment shall be made before the deadline.

Prices cover 2 tea breaks and buffet lunch, training materials and copies of the required CODES.

Important: Please note that registration without payment will incur a RM200 administration fee

Participant Details

Name: Mr Mrs Ms Dr

Contact Number: Email:

Job Title: Dept:

Head of Dept:

Invoice Details

Attention Invoice to:

Contact Number: Fax No:

Company: Industry:

Address:

Email:

Finance Department Contact Details

Name:

Contact Number:

Email:

Job Title:

Payment Methods

By Cheque/Bank Draft: Made payable to SPEKTRA NIAGA SDN BHD

By Direct Transfer: Please quote invoice number(s) on remittance advice.

Account details: MAYBANK 512-772-301-575 SPEKTRA NIAGA SDN BHD

Note:

All bank charges to be borne by payer. Please ensure that SPEKTRA NIAGA SDN BHD receives the

invoiced amount.

To register,

fill in the

form and fax

to us

TODAY!

Program Director

Name: Zulkiflee Ngah

Email: [email protected]

Tel: 03-8061-4606 Fax: 03-8061-4506

Cancellation Policy

Participant may substitute delegates at

any time as long as reasonable advance

notice is given to SPEKTRA. For any

cancellation received in writing not less

than fourteen (14) working days prior to

the training, participant will receive a

full refund less a RM 200 administration

fee and any related bank or credit card

charges. Participant who cancel less

than fourteen (14) working days of the

training, or who do not attend the

training, are liable to pay the full

training fee and no refunds will be

granted.

Disclaimer

Please note that trainers and topics

were confirmed at the time of

publishing; however, SPEKTRA may

necessitate substitutions, alterations or

cancellations of the trainers or topics. As

such, SPEKTRA reserves the right to

change or cancel any part of its

published program due to unforeseen

circumstances. Any substitutions or

alterations will be updated on our

webpage as soon as possible.

API 510 API 570 AP1 653 API 580 QUTE

Training Date:

______________