APG 2011 catalogue

37
Professional Sound Systems CATALOGUE 2011

description

APG catalogue

Transcript of APG 2011 catalogue

Page 1: APG 2011 catalogue

1

Professional

Sound

Systems

CATALOGUE 2011

Page 2: APG 2011 catalogue

INCREASING DEMAND ON SOUND QUALITY

" Due to major changes in the recording industry, live performance has once again taken a very important place in the music industry.

Today’s artists are often moving from studio to stage and back again far more frequently than in the past, and are expecting to find, in their live performance, if not the exact sound of their records, then certainly the wellbalanced, detailed sound of top quality studio reproduction.

Digital technologies have increased the performance quality of hi-fi installations at home and in the car, as well as of personal players, thus generating a demand for improved sound quality in concert halls.

Sound professionals are facing the challenge of satisfying clients on both sides of the stage: providing the artists with the best conditions for the expression of their talents as well as displaying the musical shading of a live show for the audience.

The new generation of APG products is the result of a thorough knowledge of performance in sound reproduction. Sonic quality is not a subjective notion when considering criteria such as phase, bandwidth, frequency response linearity, and all non distortion-related criteria.

These fundamental considerations have been taken into account and allow APG products to combine work with pleasure every time an APG sound system powers into action.

The demands of professional users are constantly evolving toward products that combine high sonic performance and sophisticated ergonomics that enable them to handle all the constraints imposed by the site with no compromise in performance or handling..

As has been the case for quite some years now, APG continues to provide answers and solutions to these issues, with passion and objectivity, and as always, with no compromise.

It is our ambition to contribute to the technical evolution of our industry, but always with the artistic side of our work in sight."

Grégory Dapsanse

3

Page 3: APG 2011 catalogue

SO

MM

AIR

E Increasing demand on sound quality 3

SOMMAIRE 4

PRESENTATION 5

A STORY OF SOUND… 6History and evolution of the product range 6

PHILOSOPHY 7Concept 7Innovation 7Support 7

TECHNOLOGY 8Coaxial Technology 8Isotop™ Technology 8The D'Appolito Baffle 9K-Horn Technology 9

PRODUCT RANGE 10The Speakers 10Le “processing” 11

Analogue loudspeaker processing 11Digital Processing 11

APPLICATIONS 13

LIVE SHOW 14

FIxED INSTALLATION 16

PUBLIC PLACES 18

PRIVATE PLACES 19

MATRIX ARRAY SERIES 21APG4000 22

APG6000 23

ISOLINE SERIES 25LINE ARRAY SYSTEM UNILINE

UL210 26

UL210D 27

UL115B 28

SET-UP OF A UNILINE SYSTEM 29

ERGONOMY AND MODULARITY 30

UNILINE CONFIGURATION 31

BEAM SERIES – SECTOR SERIES 333000C 34

SC25 35

DISPERSION SERIES 37DS8 38

Dx12 39

Dx15 40

DS15S 41

SMx15 42

SMx15 ET Dx : ERGONOMY 43

MICRO SERIES 45MC1 46

MC2 47

MICRO AXIAL SERIES 49Mx1 50

Mx2 51

Mx4N 52

SUB12Mx /N 53

SUBWOOFER 55SUB138P 56

SUB238S 57

TB115S 58

TB118S 59

TB215S 60

TB218S 61

PROCESSORS, TOOLS, OPTIONS & ACCESSORIES 63

PROCESSING 64"SP" type Static Processor 64"LP" type dynamic Loudspeaker Processor 64Digital processors DMS26 65Networking and distant control 65

TECHNICAL SUPPORT & APG TOOLS 66APG Project Guide 66EASE Simulation 66Uniline Aiming Tool 67Matrix Aiming Tool 67

OPTIONS 68Custom Design 68Special Options 68Custom products 69

ACCESSORIES 70

APG

A STORY OF SOUND…

PHILOSOPHY

TECHNOLOGY

PRODUCT RANGE

PR

ES

EN

TATI

ON

Catalogue 20114 5

Page 4: APG 2011 catalogue

7

A STORY OF SOUND…

From its beginnings in 1978, APG has forged itself a solid reputation in the industry of professional sound reinforcement systems. At the beginning, a handful of people, passionate about music and audio, launched a project of integrated and tailor-made sound systems.

The acoustic and electronic competences of the team and their fierce determination to build high quality, "no-compromise" products have quickly resulted in a range of professional speakers, fully adapted to the specific needs of users in the world of live sound, fixed installations, theatres, clubs, TV shows, sport venues and more..

The superlative sound quality of APG loudspeakers has quickly positioned the brand among the leaders in the market. The history of APG is full of innovative product developments that have marked generations of users.

History and evolution of the product range1982 : Mobile 2 (MB2)

First compact full range speaker.Market leader in France that started the "compact" trend.

1984 : Micro 2 (MC2)

First satellite speaker based on a 6.5" driver with Appolito's baffle.Unique size/power ratio. Leading product in TV studios in the 80's.

1991 : VS1R

First coaxial speaker with directivity control and integrated asymmetrical 60°x 40° horn.Multipurpose FOH/stage monitor speaker.

1992 : DS1R

Fisrt coaxial stage monitor dedicated to live vocal reproduction.All inclusive ergonomics offering two different angles in floor monitoring.First loudspeaker of the Dispersion Series.

1997 : APG9000

First long-throw collinear system with double directivity control.Creation of IsotopTM technology.First system of the Matrix Array Series.

2004 : APG6000

First line source matrix system.Collinear and IsotopTM technologies, dual directivity control.

2006 : TB218S

High power infra bass "touring" subwoofer.Complex acoustic load of double K-HORN.First "TB" type APG subwoofer.

2008 : SMx15

First high power multipurpose coaxial monitor.The only stage monitor in the world featuring 5 tilt angles in floor monitoring.Unique ergonomics with the innovative ATSTM system.

2009 : UNILINE

Highly modular compact line array system.Constant horizontal directivity and highly optimized full integrated ergonomics.

2010 : Dx12 / Dx15

Two compatible speakers using coaxial technology.Unique versatility thanks to an "all inclusive" ergonomy.

We hear what you say... the APG sound

PHILOSOPHY

APG’s ambition is to develop ultra-efficient products optimized to the smallest detail in every domain: electro-acoustic, ergonomics, size/weight/performance ratio, reliability, modularity, simplicity and design.

Today’s product range is the result of long experience and a rigorous scientific approach to the fields of acoustics, electronics and mechanics.

APG carries out a "no-compromise" R & D policy, which aims to provide the highest degree of reliability and sound quality, for every product.

ConceptAPG is extremely focused on everything that can make life easier for our users, and helps them to provide exceptional sound reinforcement for their customers day after day, year after year.

This becomes possible when you combine a high level of scientific and technical knowledge with a desire to listen to, respect and take into account the needs and constraints of those who, every day, load in, set-up, install, integrate, tune, and use our systems and must make them profitable.

Our technical collaborations are the practical realization of this approach: at each crucial step of the product development, APG consults recognized experts in their disciplines to participate in the optimization and validation of performance criteria.

InnovationInnovation is at the heart of APG’s history and what we do today.

The excellence toward which we strive requires knowledge "outside the box" when designing new products. The new generation products are no exception to this rule and are crammed with such innovations, especially in the field of ergonomics, ease of use and reliability.

SupportThe APG range offers a wide range of solutions that are exclusively dedicated to sound reinforcement professionals.

APG assists and supports users and operators by providing high levels of technical support and training on the full range of products. The objective is always the same: to provide all the tools to enable you to put on a production of a level of quality and performance that surpass all expectations - both of the customer and the public.

Catalogue 20116

Page 5: APG 2011 catalogue

Catalogue 20118

TECHNOLOGY

If the words "audiophile" and "high fidelity" were not so overused, they would perfectly describe the sonic experience delivered by APG speakers.

The APG range is developed around three technologies: Isotop™, coaxial, and d’Appolito and is organized in eight series of speakers whose common thread is sonic purity.

Coaxial TechnologyCoaxial technology consists of two loudspeakers on the same diffusion axis, thus resulting in linearity for both amplitude and phase curves and in a perfectly consistency acoustic field even in nearfiled listening.

The coaxial principle has become one of the technological foundations of APG since the launch of the VS1 (first coaxial speaker with integrated horn) in 1991. Since then, APG has developed a unique know-how in the optimisation of this technology which has been implemented directly in the coaxial speakers and indirectly in the development of the Isotop™ driver, APG’s proprietary compression driver.

Isotop™ TechnologyIsotop™ technology comprises a 6.5" cone driver / HF 1" driver which generates a real constant phase wavefront.

The Isotop™ driver provides a real continuous 300 Hz to 19 KHz bandwidth with highly superior SPL capability and much lower distortion than traditional compression drivers.

The Isotop™ technology equips all FOH systems in Matrix Array, Isoline, Beam Series & Sector Series.

9

The D'Appolito BaffleThe D’Appolito baffle enables directivity control without the use of a horn. The directivity is controlled lower down in the frequency range while limiting the distortion and the diffractions caused by a physical horn. Furthermore, the close coupling of the two transducers affords a significant gain in efficiency.

K-Horn Technology K-Horn technology is a complex acoustic load designed for subwoofers and low frequency speakers.

It consists of loading a double interactive chamber with a K-horn. This exclusive technology provides a significant increase in gain, between 4 and 6 dB, compared to the conventional bass reflex load and direct radiation.

This technology has been designed for the new generation "TB" subwoofer family.

COAxIAL TECHNOLOGY BENEFITS:

Conical acoustic opening:

Wider acoustic coverage•Phase linearity•Less diffraction and distortion than a horn•

acoustic source coherent in phase and frequency:

More natural sounding•Less feedback•Better sound quality•

ISOTOPTM TECHNOLOGY BENEFITS:

6,5" = real medium frequency transducer•HF 1" = real high frequency transducer•Higher power in comparison with conventional compression driver•Wider bandwidth (400 Hz - 19 KHz)•Less distortion & aggressivity•Linearity in power (same sound reproduction whatever the power)•

D'APPOLITO'S PRINCIPLE BENEFITS:

Directivity lobe = horn-like effect•Narrowing of directivity•+ 6 dB gain by vectorial acoustic coupling•

Example MC2 :•

- Longer throw than coaxial speakers - 100 dB @ 1W / 1m efficiency - Intelligibility in reverberating environments

K-HORN TECHNOLOGY BENEFITS:

Bandpass load: + 2 dB gain•K-Horn : + 2 dB gain (100 Hz)•Forced air cooling system: - 2 dB thermal compression•Total : 4 to 6 dB more on SPL Max (compared to direct radiation & •

bass reflex)

Page 6: APG 2011 catalogue

11Catalogue 201110

PRODUCT RANGE

"A complete set of high performance solutions"

Since its inception in 1978, our products and services have been aimed at providing solutions for rental companies, installers and professional users.

A real passion for sound combined with a strict scientific rigour, is the foundation for the extended range of products which has forged the reputation of the legendary "APG sound".

Achieving acoustical transparency, minimum distortion, reliable driver protection and performance consistency, impose a no-compromise choice of components. APG works closely with a select group of prestigious transducer manufacturers, who are capable of guaranteeing the strict manufacturing tolerances induced by the development criteria. Final tuning and proofing of the system is conducted by our beta-testers in real-world situations.

The APG range is entirely devoted to the professionals of the industry. Its diversity allows anyone to find the products and compose the system the most adapted to a specific application and working condition.

The APG product line comprises a comprehensive range of loudspeakers and dedicated processors designed to cover the whole range of professional sound requirements. For those who want to further explore the territories of specific applications, the APG R&D team offers its complete manufacturer’s knowledge to answer your specific requirements.

The SpeakersThe speaker range is built around three main technologies and arranged in eight series.

Coaxial technology equips the multi-purpose DISPERSION series and the MICRO AXIAL range of first class installation loudspeakers.

ISOTOP™ technology is used in the MATRIX ARRAY series, in the ISOLINE line array, in the "plug & play" BEAM series and the SECTOR line-source speakers.

The D’Appolito principle is used in the MICRO series and the Matrix Array technology.

A comprehensive line of SUBWOOFERS provides accurate low frequency reinforcement for the various types of sound and the required coverage in the given configurations.

Le “processing”

Scientific research based on mathematical analysis of all the loudspeaker operating parameters has provided guidance for the conception of specific loudspeaker processors, which guarantee flawless reliability of the systems.

Various types of analogue and digital processors allow a processing configuration to provide any required level and protection controls.

All cabinets for which the processor is optional are optimised for vocal reproduction and mid-power level applications. "SPM" processors deliver a bandwidth EQ for musical applications at mid-power level. DMS26 processor’s presets follow the "SPM" processors' functions. "LP" dynamic processors are required for high-power applications and live sound. The combination of DMS26 & "LP" processors offer maximum control.

Analogue loudspeaker processingScientific research based on mathematical analysis of all the operating parameters of loudspeakers has provided guidance for the design of specific processors, which guarantee flawless system reliability.

According to the expected environment and projected use of the system, APG offers two types of processors.

Static processors provide frequency response optimisation and sub-and-ultrasonic protection in applications where the system is not run at its maximum dynamic capacity.

Dynamic processors control all the active filtering, equalisation and topology-related settings of the system. They also provide loudspeaker protection by the simulation of destructive parameters, allowing the maximum dynamic capacity of the speakers to be used, with the highest reproduction quality and optimum reliability.

Digital ProcessingAPG offers a complete digital processing solution, based on the DMS26 processor, either for main processing of systems constituted of several sub-systems (main system, delays, front-fills, distributed sound systems), or for dedicated processing based on speaker "presets", made by APG.

It is possible to control a complex assembly of several DMS26 via the BV Net network protocol.

DMS26

LP Processor

MX1 MX2 MX4 MC1 MC2 /C DS8 DX12 DX15 DS15S SMX15

VocalLow power

Optional Optional Optional Optional Optional Optional Optional Optional LPDS15S DMS26

MusiqueMedium power

SPMX1DMS26

SPMX2DMS26

SPMX4DMS26

SPMICRODMS26

SPMICRODMS26

SPM8DMS26

SPX12DMS26

SPX15DMS26

LPDS15S DMS26

Live musicHigh power

Ø LPMX2 LPMX4 Ø Ø LPDS8 LPDX12 LPDX15 LPDS15S DMS26

Stage monitoring Ø Ø Ø SPR SPR SPR SPWX SPWX LPDS15S DMS26

APG Product Line Type Technology Power Distance Range Markets / Applications

Matrix Array MatrixCollinear IsotopTM

Medium to high power

Medium to long rangeTouring / Installation All FOH type

Isoline Line array systemLine sourceIsotopTM

Medium to high power

Medium to long rangeTouring / Installation Live Music

Sector Speaker columnLine sourceIsotopTM

Medium to high power

Medium to long rangeInstallation / RentalVocal / mid-hi

Beam Plug & play systemHornIsotopTM Medium power Medium range

Installation / RentalLive Music

Dispersion Versatile speaker Coaxial Small to high power Close range ( < 15 m)FOH / Stage monitor Live / Vocal / Sound effects

Micro Compact speaker6,5" driver D'Appolito

Small Close to medium rangeFOH / Stage monitor Vocal / mid-hi

Micro AxialFixed installation speaker

Coaxial Small Close rangeFixed installation Live / Vocal / Sound effects

SubwooferLow frequency speaker

Double Chamber K-Horn

Small to high powerDepending on configuration

Low & infra low reinforcement

Page 7: APG 2011 catalogue

Live ShowConcerts and Touring

Corporate Events

TV Stages

Fixed installationTheatres / Auditoriums

Congress Center / Show Room

Public placesPlaces of Worship

Stadiums & Sports Venues

Private placesNight-clubs & Bars

Restaurants & Hotels

AP

PLI

CAT

ION

S

13Catalogue 201112

Page 8: APG 2011 catalogue

15Catalogue 201114

LIVE SHOWCORPORATE EVENTS

TV STAGES

CONCERTS AND TOURINGSOUND AND LIGHT SHOW

SHOW

Page 9: APG 2011 catalogue

17Catalogue 201116

FIXED INSTALLATIONCONGRESS CENTER

AUDITORIUMS

SHOW ROOMTHEATRES

Page 10: APG 2011 catalogue

19Catalogue 201118

PUBLIC PLACES PRIVATE PLACES

PLACES OF WORSHIP

STADIUMS & SPORTS VENUES

NIGHT-CLUBS & BARS

RESTAURANTS & HOTELS

Page 11: APG 2011 catalogue

MAT

RIX

AR

RAY

SE

RIE

S

MATRIX ARRAY SERIES

APG4000

Modular matrix system

APG6000

Line source matrix system

Catalogue 201120 21

Page 12: APG 2011 catalogue

Catalogue 201122 23

SE

RIE

S M

ATR

IX A

RR

AY

Modular matrix system2 speakers, 3-way active3 x 15", 1 x Isotop15TM driver

APG4000

The APG4000 belongs to APG’s family of Matrix Array technology. The collinear technology of the Matrix Array systems is the foundation of the Matrix sound design concept i.e. the ability to create perfectly homogeneous and coherent configurations thanks to the simultaneous control of horizontal and vertical coverage.

APG4000 comprises two individual speakers, 4000HI and 4000LO, which share the same external dimensions, for easy mechanical assembly. The modularity of the system enables all types of configuration ranging from a simple system with only 4000HI cabinet up to large clustered system in combination with APG6000 for very long throw high power applications.

The APG4000 system is exceptionally compact with very high quality, musical sound reproduction. It is designed for high power and precision coverage F.O.H applications indoors or outdoors.

The sophisticated ergonomics of the enclosures and the hanging and transportation systems are all fully optimised to facilitate system handling and setup in touring conditions. The directivity control and the modularity of the system make it possible to assure precise coverage throughout, regardless of the conditions.

The APG4000 and APG6000 systems are both compatible and complementary: they use the same internal components and technologies. They have in common the same horizontal dispersion angles, the same installation principles and the same connectors and flying systems.

A standard 4000 F.O.H set up is composed of 4 x 4000LO speakers and 4 x 4000HI speakers, 1 x 4000SP processor, 4 stereo amplifiers.

For very low frequency extension, the recommended subs are: TB118S, TB215S and TB218S.

BENEFITSExclusive Isotop• TM technology

High directivity control (60°H et 15°V)•

Flexibility : independent "Lo" & "Hi" speakers•

May be stacked or flown•

Quick setup and installation•

Compatible with APG6000•

APPLICATIONSMedium to high power•

Medium to long throw (40m outdoor)•

High precision coverage•

Fixed or temporary installation, touring•

Indoor or outdoor•

BENEFITSExclusive Isotop• TM technology

High directivity control (60°H et 5°V)•

Line source and matrix system•

Exceptional SPL•

Integrated flying system•

APPLICATIONSHigh precision reproduction•

Very long throw coverage•

Long-throw complement to APG4000•

Fixed or temporary installation, touring•

Indoor or outdoor•

APG6000Line source matrix system2 speakers, 3-way active3 x 15" Nd, 2 x Isotop5TM drivers

SE

RIE

S M

ATR

IX A

RR

AY

The APG6000 belongs to APG’s family of Matrix Array. The collinear technology of the Matrix Array technology is the foundation of the Matrix sound design concept i.e. the ability to create coherent configurations thanks to the simultaneous control of horizontal and vertical coverage.

The APG6000 comprises two individual speakers, 6000HI and 6000LO, which share the same external dimensions for easy mechanical assembly. It is designed for vertical line source coupling and long throw coverage. The dynamic capacity of the APG6000 and its impressive SPL-to-size ratio makes it one of the most powerful systems in the market. Based on a similar the same ergonomics as the APG4000 system, the APG6000 is the dedicated long-throw complement for APG4000.

It is ideal for high power F.O.H applications, either on tour or in fixed installations, and for both indoor and outdoor use. The complete ergonomics of the speakers, the hanging and transportation systems are all fully optimised to facilitate setup in touring conditions.

The APG4000 and APG6000 systems are both compatible and complementary. They use the same internal components and technologies. They have in common the same horizontal dispersion angles, the same installation principles and the same connectors and flying systems.

For very low frequency extension, the recommended subs are: TB118S, TB215S and TB218S.

23 * full range mode with processor

References 4000HI 4000LO

Acoustic way / ModeTransducer (Ø coil)

3 way / bi amp1x15" (4") 1xIsotop15TM

1 way / mono amp2x15" (4")

Bandwidth (+/- 3dB)Directivity @ -6dB

65Hz - 19kHz*60°H x 15°V

45Hz - 160Hz*

Nominal ImpedancePower AESMinimum amplification

mid : 8 Ohm hi : 8 Ohmmid : 1000W hi : 300W mid : 1000W hi : 300W

2 x 8 Ohm2 x 1000W2 x 1000W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

mid : 104 hi : 108134139

104136139

Dimensions (H,L,P)Weight

440 x 750 x 780 mm52 kg

440 x 750 x 780 mm40 kg

OPTIONS AND ACCESSORIES6TRUSS Hanging Truss for 4000 & 6000

4000PR Wheelboard for one 4000 speaker

6000PR Wheelboard for 4000 & 6000 speakers

PCM Mono connection patch (4 way) 2U

PCS Stereo connection patch (8 way) 2U

PROCESSOR4000SP Mandatory for all applications

* full range mode with processor ** ND = magnetic neodimuim compression driver

References 6000HI 6000LO

Acoustic way / ModeTransducer (Ø coil)

3 way / bi amp1x15"ND (4")** 2xIsotop5TM

1 way / mono amp2x15"ND (4")**

Bandwidth (+/- 3dB)Directivity @ -6dB

65Hz - 19kHz*60°H x 5°V

45Hz - 160Hz*

Nominal ImpedancePower AESMinimum amplification

mid : 8 Ohm hi : 16 Ohmmid : 1150W hi : 600W mid : 1150W hi : 600W

2 x 8 Ohm2 x 1150W2 x 1150W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

mid : 104 hi : 112139145

104137140

Dimensions (H,L,P)Weight

520 x 750 x 780 mm67 kg

520 x 750 x 780 mm53 kg

OPTIONS AND ACCESSORIES6TRUSS Hanging Truss for 4000 & 6000 systems

6000PR Wheelboard for 4000 & 6000 speakers

PCM Mono connection patch (4 way) 2U

PCS Stereo connection patch (8 way) 2U

PROCESSOR6000SP Mandatory for all applications

Page 13: APG 2011 catalogue

ISO

LIN

E S

ER

IES

LINE ARRAY SYSTEM UNILINE

UL210

Line array speaker – UNILINE system

UL210D

"Down fill" speaker – UNILINE system

UL115B

Bass speaker – UNILINE system

SET-UP OF A UNILINE SYSTEM

ERGONOMY AND MODULARITY

MODES D’UTILISATION

25Catalogue 201124

Page 14: APG 2011 catalogue

Catalogue 201126 27

ISO

LIN

E S

ER

IES

ISO

LIN

E S

ER

IES

* full range mode with processor ** ND = magnetic neodimuim compression driver

References UL210D

Acoustic way / ModeTransducer (Ø coil)

3 way / bi amp2x10"ND (2")** 1xIsotop10TM

Bandwidth (+/- 3dB)Directivity @ -6dB

80Hz - 19kHz*105°H x 10°V

Nominal ImpedancePower AESRecommanded amplification

lo : 8 Ohm mid/hi : 8 Ohmlo : 400W mid/hi : 300W lo : 300 to 800W mid/hi : 200 to 600W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

lo : 101 mid/hi : 105127133

Dimensions (H,L,P)Weight

264 x 700 x 584 mm34 kg

The UL210D speaker is the downfill speaker of the UNILINE system, to be used with the UL210 line array speaker and the UL115B dedicated bass speaker. With these three elements, the UNILINE system offers a very high level of modularity : acoustic and mechanical modularity . The very high number of possible combinations allows the adaptation to all kinds of venues and places and all kinds of sounds to be reproduced .

The UL210D speaker uses the same IsotopTM engine (450Hz – 19 kHz) than the UL210, in order to maintain a perfect sonic compatibility and a continuous acoustic line. The “line source” type coupling is therefore guaranteed.

The UL210D is designed and optimized for downfill use, as a complement to a UL210 main speaker cluster. Acoustically, the horizontal coverage of 105° is constant up to the extreme highs. Due to the wider pattern, the on-axis sensitivity is reduced, compared to the UL210. However, the resulting power/weight ratio is improved..

The rigging system is identical to the UL210 and the transport systems (dollies and flight cases) are also completely compatible. Therefore, the rigging and set-up protocols are exactly the same.

One to four UL210D can be installed at the bottom of a UL210 cluster, depending on the coverage that is needed in the coupling plane of the vertical line.

The modularity of the system enables all types of configurations, mixing UL210/UL210D/UL115B, flown or stacked.

A preset library is provided for the DMS26 digital processors.

OPTIONS AND ACCESSORIESUL210WB Dolly for UL210 (up to 6 speakers)

FCUL210H3 Flight Case Bell for 3 x UL210 on dolly

FCUL210V2 Flight Case for 2 x UL210 in vertical

ULTRUSS Truss for Uniline system (lifting and stacking)

ULRAIL Truss for fixed installation

ULTRUSSSP 4 steps for Stacking

FC2ULTRUSS Flight Case for 2 APG ULTRUSS

PROCESSORDMS26 Mandatory for all applications

BENEFITSWide acoustic coverage (105°)•

Same Isotop• TM engine as UL210

Very low distortion•

Light weight•

Integrated rigging system (same as UL210)•

Dedicated transport dollies and flight cases•

Mechanical modularity with UL210 and UL155B•

APPLICATIONSDownfill•

Short or medium throw•

Fixed or temporary installations•

Touring•

ACOUSTIC SIMULATION•UnilineAimingTool

•Ease4:speakerdata

•EaseFocus:.GLLfiles

"Down fill" speaker – UNILINE system2-way active, vented cabinet 2 x 10" Nd, 1 x Isotop10TM driver

UL210Line array speaker – UNILINE system2-way active, vented cabinet 2 x 10" Nd, 1 x Isotop10TM driver

The UL210 is the "line array" speaker of the UNILINE system which also comprises the dedicated UL115B bass speaker. UNILINE has been developed as a very high precision and highly modular system. From an acoustic point of view, APG’s Isotop™ technology generates an increasing vertical directivity index sound field in the mid-high range from 450 Hz to 19 kHz. This results in flawless line source coupling, which in turn makes UNILINE perfectly adapted to all applications from short to very long throw applications.

The UNILINE can be used in 3 modes. In "standalone" mode, UL210 is ideal for medium power broadband voice and music applications. In "extended" mode, UL210 is combined with UL115B or with a subwoofer for high power music applications. In "complete mode", UL210 is combined with UL115B and infra bass subwoofers for very high power and live music applications.

Handling and transport features are designed to reduce significantly rigging time with still providing maximum security.

UNILINE can be used with only three UL210 speakers for small venues. The rigging system is designed to fly up to twenty-four UL210 speakers to cover (with high power) large venues or outdoor spaces. A wide variety of UL210/UL115B configurations are possible thanks to the modularity of the system, either flown or stacked, which offers a virtually unlimited number of combinations for optimal coverage of just about any site.

A preset bank is available for the digital processors DMS26.

BENEFITSExclusive Isotop• TM technology

Real horizontal constant directivity•

Very low distortion•

Exceptional size-to-SPL ratio•

Integrated, intuitive, safe rigging system•

Transportation with multi-speaker dollies•

Exceptional modularity with UL115B speaker•

APPLICATIONSHigh power sound system•

High precision sound reproduction•

Wide and homogenous acoustic coverage•

Mid range to long throw (80m outdoor)•

Fixed or temporary installation, touring•

ACOUSTIC SIMULATION•UnilineAimingTool

•Ease4:speakerdata

•EaseFocus:.GLLfiles

UL210D

* full range mode with processor ** ND = magnetic neodimuim compression driver

References UL210

Acoustic way / ModeTransducer (Ø coil)

3 way / bi amp2x10"ND (3")** 1xIsotop10TM

Bandwidth (+/- 3dB)Directivity @ -6dB

65Hz - 19kHz*85°H x 10°V

Nominal ImpedancePower AESRecommanded amplification

lo : 16 Ohm mid/hi : 16 Ohmlo : 800W mid/hi : 300W lo : 500 to 1200W mid/hi : 200 to 450W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

lo : 101 mid/hi : 108129135

Dimensions (H,L,P)Weight

264 x 700 x 660 mm38 kg

OPTIONS AND ACCESSORIESUL210WB Dolly for UL210 (up to 6 speakers)

FCUL210H3 Flight Case Bell for 3 x UL210 on dolly

FCUL210V2 Flight Case for 2 x UL210 in vertical

ULTRUSS Truss for Uniline system (lifting and stacking)

ULRAIL Truss for fixed installation

ULTRUSSSP 4 steps for Stacking

FC2ULTRUSS Flight Case for 2 APG ULTRUSS

PROCESSORDMS26 Mandatory for all applications

Page 15: APG 2011 catalogue

Catalogue 201128 29

ISO

LIN

E S

ER

IES UL115B

BENEFITSComplex horn loaded band pass •

High SPL capacity•

Integrated rigging system•

Multi-speaker dolly transportation•

Cardioid configuration possible•

APPLICATIONSUNILINE configurations•

Flown low frequency system•

Cardioïd pattern control •

Touring•

ACOUSTIC SIMULATION•UnilineAimingTool

•Ease4:speakerdata

•EaseFocus:.GLLfiles

The UL115B is the dedicated bass speaker of the UNILINE system which also comprises the UL210/D "line array" speakers. It contains a single high power 15" neodymium driver mounted in a double chamber band-pass speaker enclosure. The front chamber opens onto a K-Horn design. This complex design provides an optimal efficiency gain as well as excellent control over the diaphragm displacement.

This combination results in a superior dynamic capacity and an SPL gain of over 6 dB compared to a traditional direct-radiating vented enclosure.

The UL115B subwoofer has been designed for low frequency reinforcement from 45 – 180 Hz. The frequency cross-over with UL210/D is tuned between 80 Hz and 110 Hz depending on configuration. It is possible to extend LF still further by using the TB118S or TB218S subwoofers.

In applications where the bass speakers do not need to be flown, the UL115B can be replaced by APG TB115S or TB215S subwoofers. In venues or sites where speakers must be flown, it is possible to replace a classical subwoofer by a UL115B bass speaker.

All speakers are K-Horn-loaded, thus ensuring perfect compatibility, whatever the combination.

The ergonomic 4-point rigging system makes it easy to fly or groundstack the UL115B. Cardioid configurations are also made possible thanks to this system, and a SpeakonTM connector on the front makes cabling quick and easy.

Bass speaker – UNILINE system1 x 15" Nd, single K-Horn load

SET-UP OF A UNILINE SYSTEM

The Uniline system is a technical solution that comprises 3 units: the UL210 line array speaker, the UL115B dedicated bass speaker and the UL210D downfill speaker. The rigging and transport system have been designed to make it very easy and quick to set-up.

Composition: The rigging system is integrated, quick, intuitive and secureIt comprises the ULTRUSS bumper to which the brackets and the shackle attached to the hanging cable are fixed.

Benefits of a 3-point rigging system:- Faster, easier set-up - Improved system security (the system is designed such that it is impossible to fly unless all three points are securely fixed)

The use of a single point at the back makes it very easy to adjust the angle between speakers whilst they are on the floor.

Advantages of a 4-point system for the UL115B:- To make possible arrangement in a cardioïd configuration- The UL210/D and UL115B speakers are fixed together or to the ULTRUSS bumper with pins attached to the speakers by unobtrusive cables.- the ULTRUSS bumper is used for all configurations: flying of UL115B, UL210 and UL210D, intermediate bumper between UL115B, UL210 and UL210D in stacked or flown configuration and as a stabilization unit for stacking configurations.

Transport: optimized transport and storageTo transport an APG Uniline system,, there are two dedicated dollies: one adapted to the UL210/D and one to the UL155B. These dollies are also designed to be compatible with a flight case cover (FCUL210H3 and FCUL115)

The UL210WB dolly accepts up to 6 UL210/D. The UL115BWB accepts up to 4 UL115B. These dollies include fittings for mounting a flight-case cover for protection of the speakers.

The ULTRUSS bumpers are stored and transported by 2 pair in a flight case FC2ULTRUSS.

Acoustic simulation : 3 tools

Shackle

UL115WB UL210WB

Brackets

Bumper

Quick release pin + cable

Quick release pin + cable

Shackle

EASE 4 : Speaker data for Ease 4 EASE FOCUS :.GLL file for freeware Ease Focus

UAT : Uniline Aiming Tool, the APG acoustic and mechanical

simulation tool

UN

ILIN

E S

YS

TEM

* full range mode with processor ** ND = magnetic neodimuim compression driver

References UL115B

Acoustic way / ModeTransducer (Ø coil)

1 way / mono amp1x15"ND (4")**

Bandwidth (+/- 3dB)Directivity @ -6dB

45Hz - 110Hz*

Nominal ImpedancePower AESRecommanded amplification

8 Ohm1150W 800 to 2500W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

102132138

Dimensions (H,L,P)Weight

397 x 700 x 755 mm45 kg

OPTIONS AND ACCESSORIESUL115BWB Dolly for UL115B (up to 4 speakers)

FCUL115BH2 Bell flight case for 2 x UL115B on dolly

ULTRUSS Truss for Uniline system (lifting and stacking)

ULTRUSSTP ULTRUSS option: 2 Transition Parts UL210/UL115B

ULTRUSSSP ULTRUSS option: 4 steps for stacking

FC2ULTRUSS Flight Case for 2 APG ULTRUSS

PROCESSORDMS26 Mandatory for all applications

Page 16: APG 2011 catalogue

30 31

UN

ILIN

E S

YS

TEM

UN

ILIN

E S

YS

TEMMECHANICAL MODULARITY: ALL KINDS OF INSTALLATIONS

For flown systems, the ULTRUSS bumper enables flying from one or two engine points:

- Simple speaker configurations: UL210/D or UL115B

- Mixed configurations of UL210/D and UL115B. In this case a second intermediate ULTRUSS is necessary.

The ULRAIL bumper is dedicated to fixed installations and enables flying of a limited number of speakers: max 6 x UL210/D or max 4 x UL115B.

The angle is set with a wormgear with one rigging point.

There are two options for ground-stacked configurations:

- The first option with subs utilizes an ULTRUSS equipped with the ULTRUSSTP accessory which mounts between the UL115B sub and the bumper, and then the UL210s are stacked on top.

- The second option without subs utilizes an ULTRUSS equipped with ULTRUSSP, comprised of four feet which screw into the bottom of the bumper, thus providing a stable platform for the UL210s

In ground-stacked mode, the maximum number of enclosures at the maximum angle is six UL210s

The UNILINE technology can be described as a big system that has been “cut in two”: one main medium/high speaker UL210, one bass speaker UL115B and UL210D for downfill use. These three speakers have been optimized to bring the best possible mechanical modularity.

ULTRUSS is the only bumper required, whether clusters are ground-stacked or flown.

ACOUSTIC MODULARITY : 3 KINDS OF CONFIGURATIONS

UNILINE CONFIGURATION

The UNILINE system is designed for applications that justify the use of a “line array” system: events and show venues from medium to large size, in touring and fixed installation.

The APG UNILINE system offers a great mechanical and acoustic modularity, and can be configured to be a compact low power system, for medium throw, or as a high power and long throw system. It fits perfectly in a 450-seats theatre with 3 boxes per side and in an open air festival for 10.000 people with 12 boxes per side.

Compact size system

•Exampleofconfiguration: - 3 x UL210 per side - 3 x UL115B in cardio

•Application:theaters,concertvenues

•Publiccapacity:upto500people

•Benefits: - no rigging - directivity control - 4 amp channels per side (2 standard racks)

Medium throw system

•Exampleofconfiguration: - 6 x UL210 per side - 1 x UL210D per side - 2 x TB218S per side

•Application:concertvenues,outdoorevents

•Publiccapacity:500to3000people

•Benefits: - Limited weight (250 kg) - medium throw (35 m outdoor) - 4 amp channels per side + sub amp (3 standard racks)

High power system

•Exampleofconfiguration: - 10 x UL210 per side - 2 x UL210D per side - 8 x UL115B per side - 2 x 4 x TB218S in arc sub line

•Application:concertvenues,outdoorevents

•Publiccapacity:+6000people

•Benefits: - comparable with 15” line array systems - long throw (80 m outdoor) - 8 channel amp rack per side + sub amps (6 standard racks)

Stacked

Full-range modeIn this mode, the system works in 2-way mode without bass speakers or subs. The system is then made of one or several clusters of UL210/D only.

Flying system

"Complete mode"This is a 4 way mode where all the components of the Uniline range are in use: UL210/D, UL115B and subs. This mode gives the largest dynamic range down to the lowest frequencies.

2 "extended mode" In the extended mode, we have two possibilities:- UL210/D enclosures coupled with UL115B- UL210/D with infra bass subs.

Catalogue 2011

Mixed UL210/D UL115B Simple UL210/D

Mixed UL210/D UL115B cardio

Simple UL210/D

Example1 x ULTRUSS + 6 x UL210

+ 2 x UL210D

2 x TB215S 3 x TB218S

Example1 x ULTRUSS + 5 x UL210

Example1 x ULTRUSS + 7 x UL210 + 2 x UL210D

Example2 x ULTRUSS + 4 x UL210+ 2 UL115B

Example1 x ULTRUSS + 6 UL115B

Mixed UL210/D UL115B

Page 17: APG 2011 catalogue

BE

AM

SE

RIE

S –

SE

CTO

R S

ER

IES

BEAM SERIES

3000C

Compact horn loaded speaker

SECTOR SERIES

SC25

Line source column speaker

Catalogue 201132 33

Page 18: APG 2011 catalogue

Catalogue 201134 35

SE

CTO

R S

ER

IES

BE

AM

SE

RIE

S 3000C

The 3000C is a compact wide band horn-loaded speaker. It has been the subject of intensive development on passive filtering in order to achieve the best sonic performance in a full range mono amplified system.

The 3000C is a 3-way system comprising an 18" cone driver loaded in bass reflex in a significant volume for an extended bandwidth in low frequencies; a 6.5" cone driver for a perfect reproduction of the full mid-range; and a 1" compression driver for clear and precise reproduction of high frequencies.

The 3000C model is ideal for high quality sound reinforcement in mid-size venues. Moreover, the directivity pattern of the asymmetric mid/high horn naturally concentrates the acoustic energy towards the front listening zone without having to incline the loudspeaker itself. Therefore the reverberated energy coming from ceilings is reduced, which increases the intelligibility in difficult acoustical environments.

Its ergonomics make it ideally suited for fixed installations. However, the 3000C can also be used as a mobile system, and has proved itself to be a highly versatile solution for medium power high precision applications. Using the APG IsotopTM technology it is fully compatible as complement (front fill or delay) for large configurations set up with MATRIX ARRAY or UNILINE systems.

For low and very low frequency extension, the recommended subs are SUB238S, TB115S, TB118S and TB215S.

BENEFITSExclusive Isotop• TM technology

Asymmetric vertical directivity +5° / -20°•

Mono amplification•

High performances in low frequencies•

High sound reproduction quality•

Low distortion•

APPLICATIONSCoverage of mid-size theatres•

Reverberant rooms•

Medium throw/power range•

Fixed installation or portable use•

"Front fill" or "Side fill"•

Compact horn loaded speaker3-way passive, vented cabinet1 x 18", 1 x Isotop25TM driver

The APG Sector Series is characterized by its outstanding performance in terms of directivity, and atypical acoustic beam generated in the mid/ high bandwidth.

The SC25 is the ideal alternative solution to small size line arrays commonly used in vocal applications.

The SC25 is a line source column speaker. From an acoustic point of view the SC25 loudspeaker features the same vertical arrangement that can be found in small line arrays. It is fitted 6 x ISOTOP™ drivers offering a fixed curvature radius resulting in a 25° vertical acoustic beam in the high frequency band. It is particularly efficient for high precision long throw applications or in difficult acoustic environments.

The application field of this speaker is very wide: vocal reproduction for stadiums, house of worship, cathedrals, large outdoor sites, high precision reproduction for indoor theatres, convention centres, opera houses, etc.

Since it uses the APG ISOTOPTM technology, this loudspeaker can be used as complement (side fill or delay) in FOH systems constituted of MATRIX ARRAY, UNILINE or BEAM speakers.

For low and very low frequency reinforcement, the following subs are recommended: SUB138P, SUB238S and TB115S.

BENEFITSHigh directivity control (60°H x 25°V)•

Very high efficiency•

Competitive alternative to mini "line array" •

Easy to install and set up•

Mono amplification•

APPLICATIONSLong range coverage pattern•

High intelligibility vocal reproduction•

Reverberant sites•

Mid/hi complement to main system•

Line source column speaker2 way passive, sealed cabinet6 x APG Isotop7TM drivers

SC25

* full range mode with processor

References 3000C

Acoustic way / ModeTransducer (Ø coil)

3 way / mono amp2x18" (3") 1xIsotop25TM

Bandwidth (+/- 3dB)Directivity @ -6dB

50Hz - 19kHz*60°H x (+5°, -20°)V

Nominal ImpedancePower AESRecommanded amplification

4 Ohm700W 500 to 1200W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

102128132

Dimensions (H,L,P)Weight

1000 x 660 x 720 mm52 kg

OPTIONS AND ACCESSORIESPL3000C Steel frame flying system

3000CPR Wheelboard with strap 1 x 3000C speaker

PROCESSORLP3000C Mandatory for all applications

* full range mode with processor

References SC25

Acoustic way / ModeTransducer (Ø coil)

2 way / mono amp6xIsotop7TM

Bandwidth (+/- 3dB)Directivity @ -6dB

250Hz - 19kHz*60°H x 25°V

Nominal ImpedancePower AESRecommanded amplification

6 Ohm1200W 1200W into 8 Ohm

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

112137141

Dimensions (H,L,P)Weight

1580 x 286 x 584 mm66 kg

OPTIONS AND ACCESSORIESETSC25 Lyre bracket for SC25

FCSC25 Flight case for SC25 + ETSC25

INOX03 Stainless steel screws and waterproof treatment cone driver

TROPIC04 Full treatment: wooden cabinet, screws and HP

REPEINT07 Special colour paint (RAL or PANTONE ref)

PROCESSORLPSC25 Mandatory for all applications

Page 19: APG 2011 catalogue

DIS

PE

RS

ION

SE

RIE

S

DISPERSION SERIES

DS8

Ultra compact multi purpose speaker

DX12

Multi purpose compact speaker

DX15

High performance multipurpose speaker

DS15S

High power speaker

SMX15

Multi purpose high performance monitor

SMX15 / DX : ERGONOMY

Catalogue 201136 37

Page 20: APG 2011 catalogue

Catalogue 201138 39

DIS

PE

RS

ION

SE

RIE

S

BENEFITSVersatility F.O.H./ stage monitoring•

"Studio monitor" sound reproduction•

Musicality and fidelity•

Very low distortion•

Size-to-SPL ratio•

APPLICATIONSCompact and discreet FOH•

Nearfield listening•

Additional sound reinforcement•

Distributed sound system•

The DS8 is a highly compact coaxial speaker. The coaxial driver alignment offers a perfectly coherent wide acoustic field even in nearfield listening. The result is a very homogeneous conical coverage and a limited feedback effect.

Thanks to its trapezoidal shape, the DS8 offers a total versatility between stage monitor and F.O.H applications, with or without subwoofers.

The DS8 is recommended for small to medium size areas and as a delay complement in large P.A. systems. Its exceptional compactness and sound clarity make it the perfect loudspeaker for applications where unobtrusiveness and high quality sound reproduction are required.

The DS8 can be installed in many ways; wall or ceiling-mounted with its steel bracket, pole-mounted or simply put on a shelf.

In wideband mode the DS8 is highly recommended for speech and vocals. With a processor, it offers fantastic performance for background music. It is also a very discreet and efficient stage monitor for theatre, radio or TV stage. With the addition of subwoofers, it is capable of high level performance in indoor mid-sized venues like clubs, music bar, or in corporate events like congress, trade shows or fashion shows.

For low frequency extension, the recommended subs are: SUB138P, SUB238S and TB115S.

Ultra compact multi purpose speaker2-way passive, vented cabinet1 x 8", 1 x tweeter

DS8

DIS

PE

RS

ION

SE

RIE

S

BENEFITSClarity and sound precision•

Musicality•

Frequency and phase linearity•

Very low distortion•

Compatibility with DX15•

Sophisticated ergonomics•

APPLICATIONSNearfield and mid-range listening•

Main FOH or additional reinforcement•

High precision stage monitoring•

"Touring" and mobile installations•

The DX12 is a compact, versatile, coaxial monitor speaker. The coaxial driver alignment offers a perfectly coherent wide acoustic field even in near field listening. The result is a very homogeneous conical coverage and a limited feedback. susceptibility. The DX12 speaker combines high acoustic performance with sophisticated ergonomics. The 12"/ 1" complement confers to the DX12 a very high sonic definition and an excellent power/size ratio. The DX12 uses the same 1" driver as the DX15, in order to make the two products compatible and complementary, respecting the same criteria of linearity in frequency, phase and power.

The asymmetric cabinet design enables two different angles as a floor monitor (30° for near-field and 45° for far-field applications), or it may be pole-mounted or flown for use as a FOH, delay or in-fill system. The DX12 meets professional requirements in terms of versatility, compactness, light weight, and handling. It offers a low profile as a stage monitor, simple flying system, ultra-fast setup, and fully protected cables and plugs etc. In full range use, the DX12 is perfectly suited to vocal applications and stage monitoring, distributed systems or as a FOH complement (delay or front fill). Because of the size of its transducers, the DX12 is also ideal for high precision stage monitoring in jazz and acoustic music. When combined with subwoofers, the DX12 becomes a powerful, compact and easily transportable system ideal for medium-throw FOH applications.

For low and very low frequency reinforcement, the following subs are recommended: SUB238P, TB115S, TB118S, and TB215S.

Multi purpose compact speaker2-way passive, vented cabinet1 x 12" Nd, 1 x HF 1" Nd

DX12

* full range mode with processor

References DS8

Acoustic way / ModeTransducer (Ø coil)

2 way / mono amp1x8" (1,75") 1xDome Tweeter

Bandwidth (+/- 3dB)Directivity @ -6dB

65Hz - 20kHz*110° conical

Nominal ImpedancePower AESRecommanded amplification

8 Ohm150W 75 to 300W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

96116122

Dimensions (H,L,P)Weight

400 x 280 x 280 mm12 kg

OPTIONS AND ACCESSORIESETDS8 Lyre bracket for DS8

FCDS8 Flight Case for 2 x DS8

INOX01 Stainless style screws and waterproof treatment on driver

TROPIC02 Complete waterproofing treatment

REPEINT03 Special colour paint (RAL or PANTONE ref)

PROCESSORWithout Vocal reinforcement, background music

SPM8 medium power music playback

LPDS8 high power and live music

DMS26 medium power, distributed sound

* full range mode with processor

References DX12

Acoustic way / ModeTransducer (Ø coil)

2 way / mono amp1x12" (3") 1xHF 1" (1,75")

Bandwidth (+/- 3dB)Directivity @ -6dB

55Hz - 19kHz*90° conical

Nominal ImpedancePower AESRecommanded amplification

8 Ohm400W 300 to 800W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

98124130

Dimensions (H,L,P)Weight

520 x 495 x 265 mm19 kg

OPTIONS AND ACCESSORIESETDX12 Quick rigging lyre bracket for DX12

QFS4 4 Quick Flying System pieces for DX12 and DX15

12ATP90 Angle Tuning Plate (0°-90°) for ETDX12

FC2DX12 Flight Case for 2 x DX12

FC4DX12 Flight Case for 4 x DX12

PROCESSORWithout Voice, background music

SPX12 mid range power music

SPWX stage monitoring

LPDX12 high power music and live

DMS26 mid range power, distributed sound

Page 21: APG 2011 catalogue

Catalogue 201140 41

DIS

PE

RS

ION

SE

RIE

S

BENEFITSStudio monitoring sound quality•

Sonic transparency•

Frequency and phase linearity•

Very limited distortion•

Highly sophisticated ergonomics•

Compatible with DX12•

APPLICATIONSNearfield and mid-range listening•

Main FOH, delay speaker or front fill•

High precision stage monitoring•

Touring and mobile installations•

The DX15 is a high power, 2-way, compact monitor speaker that benefits from coaxial technology. The coaxial driver alignment offers a perfectly coherent wide acoustic field even in nearfield listening.

The DX15 speaker combines high acoustic performance with highly functional ergonomics. Thanks to the 15" / 1" couple, the DX15 delivers "studio monitoring" – type performance with extended bandwidth, high precision and ultra-low distortion. The linearity of frequency and phase responses also ensures minimum feedback.

The asymmetric cabinet design enables two different angles as a floor monitor (30° for near-field and 45° for far-field applications), or it may be pole-mounted or flown for use as a FOH, delay or in-fill system.

The DX15 meets professional requirements in terms of versatility, compactness, light weight, and handling. It offers a low profile as a stage monitor, simple flying system, ultra-fast setup, and recesses connector.

It is the ideal solution for PA companies thanks to its multipurpose feature set and adaptability, both for corporate events and live sound.

In full range speaker use, the DX15 is perfectly suited to vocal applications and stage monitoring, distributed systems or as a F.O.H. complement (delay or front fill). When combined with subwoofers, the DX15 becomes a powerful, compact and easily transportable system ideal for medium-throw FOH applications.

For low and very low frequency reinforcement, the following subs are recommended: SUB238P, TB115S, TB118S, and TB215S.

High performance multipurpose speaker2-way passive, vented cabinet 1 x 15" Nd, 1 x HF 1" Nd

DX15

BENEFITS15 : 1000 W AES (4" moving coil)•

Mono amplification •

Exceptional Max SPL •

APPLICATIONSVery high power applications•

Main FOH•

Additional sound reinforcement•

Big size distributed sound system•

Live musique concert venues•

Discotheque•

Stadium•

Indoor or outdoor fixed installation•

The DS15S is a very high power coaxial speaker. The coaxial driver alignment offers a perfectly coherent conical acoustic field providing wide homogenous coverage even in nearfield.

The DS15S offers great flexibility between stage monitor and F.O.H applications, with or without subwoofers. It is characterised by its high efficiency and high dynamic capacity that creates an unrivalled acoustic pressure/size ratio.

The DS15S is recommended for large size areas and as a delay complement in large P.A. systems. The peculiarities of the passive filtering of this enclosure can significantly reduce the amount of distortion and aggressiveness of the compression driver compared to with most competitive products when driven hard.

The ergonomics and optional accessories of DS15S make it simple and fast to implement: it may be wall or ceiling-mounted with its steel bracket, pole-mounted or simply put on a shelf. With additional of subwoofers, it offers of very high SPLs in large venues. The LPDS15S processor is required for all applications and will manage a FOH stereo + subwoofer system.

The DS15S system is designed for high power applications in fixed installations indoors or outdoors such as concert venues, discotheques, stadiums, TV stage monitoring etc.

For low and very low frequency reinforcement, the following subs are recommended: SUB238S, TB118S, TB215S or TB218S.

DIS

PE

RS

ION

SE

RIE

S

High power speaker2-way passive, vented cabinet 1 x 15", 1 x HF 2"

DS15S

* full range mode with processor

References DX15

Acoustic way / ModeTransducer (Ø coil)

2 way / mono amp1x15" (3") 1xHF 1" (1,75")

Bandwidth (+/- 3dB)Directivity @ -6dB

55Hz - 19kHz*80° conical

Nominal ImpedancePower AESRecommanded amplification

8 Ohm600W 400 to 1200W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

100127133

Dimensions (H,L,P)Weight

580 x 575 x 340 mm23 kg

OPTIONS AND ACCESSORIESETDX15 Quick rigging lyre bracket for DX15

QFS4 4 Quick Flying System pieces for DX12 and DX15

15ATP90 Angle Tuning Plate (0°-90°) for ETDX15

FCDX15 Flight Case for 2 x DX15

PROCESSORWithout Voice, background music

SPX15 mid range power music

SPWX stage monitoring

LPDX15 high power music and live

DMS26 mid range power, distributed sound

* full range mode with processor

References DS15S

Acoustic way / ModeTransducer (Ø coil)

2 way / mono amp1x15" (4") 1xHF 2" (2,5")

Bandwidth (+/- 3dB)Directivity @ -6dB

55Hz - 18kHz*85° conical

Nominal ImpedancePower AESRecommanded amplification

8 Ohm1000W 600 to 1400W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

102130136

Dimensions (H,L,P)Weight

640 x 470 x 380 mm31 kg

OPTIONS AND ACCESSORIESFAERO4 4 Aeroquip™ flying rings

ETDS15 Fixed installation lyre bracket for DS15S

INOX02 Stainless steel screws and waterproof treatment cone driver

TROPIC02 Full treatment: wooden cabinet, screws and HP

REPEINT04 Special colour paint (RAL or PANTONE ref)

PROCESSORLPDS15S Mandatory for all applications

Page 22: APG 2011 catalogue

Catalogue 201142 43

DIS

PE

RS

ION

SE

RIE

S

BENEFITSSonic transparency•

Very high SPL•

Minimal distortion•

Very wide bandwidth•

Sonic versatility•

3 different handles•

Strong grill and front face•

ATS• TM (Aiming Tuning System)

5 angles in floor monitoring: 15°, 30°, 45°, 60° • and 90°

Sophisticated "touring" ergonomics•

APPLICATIONSVery high fidelity reproduction•

High quality stage monitoring•

High performance FOH•

TV stage monitoring•

The SMX15 is a versatile speaker that benefits from coaxial technology which offers a perfectly coherent wide acoustic field even in nearfield listening. The SMX15 has been designed for applications requiring both high acoustic performance and professional ergonomics. It is defined by a sound accuracy rivalling studio monitors whilst producing a sound pressure level down to very low up to very high frequencies.

The frequency and phase response are perfectly linear resulting in exceptional feedback reduction.

The unique ergonomics of the SMX15 which includes APG’s unique Aiming Tuning System (AST), enable the speaker to be tilted at five different angles (15°, 30°, 45°, 60°, 90°).

The SMX15 meets all professional requirements in terms of versatility, compactness, ease of handling and setup, with multiple handles, multiple recesses cabling connectors, strong front grill, etc.

As a result of its exceptional acoustic performances, it offers a different approach to stage monitoring - it is truly compatible with ear-monitors but also because it extends the response of the "in-ears" in the low frequencies which considerably enhances the experience for the artist.

Used as FOH system, the SMX15 is perfect for all types of live entertainment or music playback. Combined with subs, it becomes a high power nearfield or midfield FOH system.

For low frequency reinforcement, the recommended subs are: TB118S, TB215S and TB218S.

Multi purpose high performance monitor2-way active, vented cabinet1 x 15" Nd, 1 x HF 1,4" Nd

SMX15D

ISP

ER

SIO

N S

ER

IES

MULTI PURPOSE MONITOR

The SMX15 is a high sonic performance multi-purpose loudspeaker combining high performance with sophisticated ergonomics to answer the needs of professional users. The SMX15 relies on coaxial technology to offer a perfectly coherent conical acoustic field of 85°. Designed for applications requiring a combination of accurate sonic precision and very high SPL down to low frequencies, the SMX15 delivers an audio quality and accuracy to rival the best studio monitors as well as exceptional dynamic capability with very low distortion.

The unique ergonomics of the SMX15 makes it a highly versatile product adapted to many different types of application, and in particular as monitor wedge thanks to its ATSTM System (Aiming Tuning System).

ATS technology: 5 anglesThe ATSTM technology enables the speaker to be tilted at five different angles: 15°/30°/45°/60°/90°. It is made possible thanks to magnetic block that is fixed onto the speaker with a discrete cable.

DX : "ALL INCLUSIVE" ERGONOMY

DX12 and DX15 are designed for monitoring and FOH applications. These two coaxial speakers offer a lot of new and sophisticated ergonomic functions that meet the specific needs of the most demanding professionals. These speakers have been optimized to provide with the highest level of versatility and the best comfort in use for the rental companies, for live applications, corporate events or TV stages. Their innovative low profile design is highly appreciated in theatres and show venues both for monitoring and FOH applications.

2 angles on the floor

2 rigging systems

All ergonomic funtions integrated in side panels

TV under-stage Nearfield monitoring Farfield monitoring Side Fill system Drum Fill system

* full range mode with processor ** ND = magnetic neodimuim compression driver

References SMX15

Acoustic way / ModeTransducer (Ø coil)

2 way / bi amp1x15"ND (3")** 1xHF 1,4" (3")

Bandwidth (+/- 3dB)Directivity @ -6dB

50Hz - 20kHz*85° conical

Nominal ImpedancePower AESRecommanded amplification

8 Ohmlo : 800W hi : 125W lo : 600 to 1300W hi : 70 to 200W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

lo : 100 hi : 110132136

Dimensions (H,L,P)Weight

460 x 730 x 367 mm29 kg

OPTIONS AND ACCESSORIESETSMX15 Lyre bracket for SMX15 in fixed installation

FCSMX15 Flight Case for 2 x SMX15

PROCESSORDMS26 Mandatory for all applications

45° for far-field listening

30° for near-field listening

Concealed rigging point

Side connectors concealed and protected

DX speaker on stand

Multiple handles

Lyre bracket

Protection pads

Page 23: APG 2011 catalogue

MIC

RO

SE

RIE

SMICRO SERIES

MC1

Satellite Speaker

MC2

Compact satellite Speaker

Catalogue 201144 45

Page 24: APG 2011 catalogue

Catalogue 201146 47

MIC

RO

SE

RIE

S

BENEFITSSound clarity & high precision reproduction•

Very low distortion•

Total flexibility F.O.H / monitor•

Very compact size•

APPLICATIONSHighly intelligible vocal reproduction•

Nearfield applications•

Distributed sound•

TV & Radio stage monitor•

Fixed installation or portable system•

The MC1 is a very compact satellite speaker fitted with a 6.5" driver and a compression tweeter. The MICRO series has been developed using 6.5" transducers for no-compromise reproduction of the mid frequency range and especially the human voice, offering maximum clarity and intelligibility.

MC1 offers total flexibility between stage monitoring and F.O.H applications, with or without subwoofers. MC1 is recommended for small to medium size areas and as a delay complement in large P.A. systems.

Its compactness and sound clarity make it the perfect loudspeaker for applications where unobtrusiveness and high quality sound reproduction are a priority.

The MC1 can be installed in many ways: wall or ceiling-mounted with its steel bracket, pole-mounted or simply put on a shelf. The MC1 can be fitted with an optional 70V-100V line transformer for distributed sound design when a large number of loudspeakers is required: houses of worship, congress and conference halls, small sport sites.

When used in full range mode, the MC1 is ideal for vocal reinforcement applications such as conferences or conventions. In radio and TV studios, the MC1 has become an industry standard.

Combined with APG subwoofers, the MC1 enables the setup of very discreet FOH systems that are perfect for small clubs, bar, lounge, classrooms, meeting rooms and multimedia applications.

For low frequency reinforcement, the recommended subs are: SUB138P or TB115S.

MC1Satellite speaker2-way passive, vented cabinet1 x 6,5", 1 compression tweeter

MIC

RO

SE

RIE

S

MC2 speakers are compact satellite speakers using the D’Appolito baffle optimised for two 6.5" transducers.

Thanks to the D'Appolito's baffle, the directivity is controlled in the mid-range and makes the MC2 a perfect loudspeaker for high intelligibility vocal reproduction up to 25 meters outdoors.

MC2 is available in two different shape: standard MC2 model in multi purpose for rental market and MC2C in column shape model for fixed installation. Several impedance versions are proposed: MC24 and MC2C4 models in 4 Ohm, MC216 and MC2C16 models en 16 Ohm. MC2 speakers can be fitted with an optional 70V-100V line transformer for distributed sound design: houses of worship, convention centres and conference halls, small sport sites.

Thanks to its ergonomics, standard MC2 model offers total flexibility between stage monitor and F.O.H applications.

When used in full range mode, the MC2 ideally suited to vocal reproduction such as conferences, events, theatre. The MC2C is optimised and only designed for fixed installation with its lyre bracket.

MC2 is a perfect solution as an additional sound system such as delay line speakers or front fill. Combined with subwoofers, the MC2 enables the setup of very discreet FOH systems that are perfect for small clubs, bar, lounge, classrooms, meeting rooms and multimedia applications.

For low frequency reinforcement, the recommended subs are: SUB138P, SUB238S or TB115S.

BENEFITSExceptional SPL Max•

Sonic clarity & sound definition•

FOH/stage monitor application•

2 versions : 4 • Ω, 16 Ω

APPLICATIONSHighly intelligible vocal reproduction•

Difficult acoustic environments•

Mid-throw coverage•

Distributed sound systems•

Fixed or mobile•

Indoor or outdoor•

Compact satellite speaker2-way passive, vented cabinet2 x 6,5", 1 compression tweeter

MC2

MC2C

* full range mode with processor

References MC1

Acoustic way / ModeTransducer (Ø coil)

2 way / mono amp1x6,5" (1,45") 1x Tweeter (1")

Bandwidth (+/- 3dB)Directivity @ -6dB

65Hz - 20kHz*70° conical

Nominal ImpedancePower AESRecommanded amplification

8 Ohm100W 75 to 250W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

95116122

Dimensions (H,L,P)Weight

400 x 260 x 260 mm9 kg

OPTIONS AND ACCESSORIESETMC1 Lyre bracket for MC1

T50 Line transformer 70V / 100V, 50W

T100 Line transformer 70V / 100V, 100W

INOX01 Stainless steel screws and waterproof treatment cone driver

TROPIC01 Full treatment: wooden cabinet, screws and HP

REPEINT03 Special colour paint (RAL or PANTONE ref)

PROCESSORWithout Voice, background music

SPMICRO small and mid range power music

DMS26 mid range power, distributed sound

* full range mode with processor

OPTIONS AND ACCESSORIESETMC2 Lyre bracket for MC2 speaker

ETMC2C Lyre bracket for MC2C speaker

T100 Line transformer 70 / 100V, 100W

T200 Line transformer 70 / 100V, 200W

INOX01 Stainless steel screws and waterproof treatment cone driver

TROPIC01 Full treatment: wooden cabinet, screws and HP

REPEINT03 Special colour paint (RAL or PANTONE ref)

PROCESSORWithout Voice, background music

SPMICRO small and mid range power music

DMS26 mid range power, distributed sound

References MC2 MC2C

Acoustic way / ModeTransducer (Ø coil)

2 way / mono amp2x6,5" (1,45") 1x Tweeter (1")

2 way / mono amp2x6,5" (1,45") 1x Tweeter (1")

Bandwidth (+/- 3dB)Directivity @ -6dB

60Hz - 20kHz*90°H x 60°V

60Hz - 20kHz*90°H x 60°V

Nominal ImpedancePower AESRecommanded amplification

4 or 16 Ohm200W 100 to 300W

4 or 16 Ohm200W 100 to 300W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

100122128

100122128

Dimensions (H,L,P)Weight

480 x 340 x 335 mm14 kg

640 x 337 x 232 mm14,5 kg

Page 25: APG 2011 catalogue

MIC

RO

AX

IAL

SE

RIE

S

MICRO AXIAL SERIES

MX1

Coaxial satellite speaker

MX2

Indoor fixed installation coaxial speaker

MX4N

Installation high power coaxial speaker

SUB12MX / SUB12MXN

Indoor fixed installation low frequency speaker

Catalogue 201148 49

Page 26: APG 2011 catalogue

Catalogue 201150 51

MIC

RO

AX

IAL

SE

RIE

S

BENEFITSSmall size•

Very high sonic precision •

Very wide acoustic opening (> 120°)•

Linear phase and frequency response•

APPLICATIONSNearfield listening•

Additional sound reinforcement•

Conference and A/V market •

Theatres and surround system•

Fixed installation or touring•

"Hifi" and "Home Theatre"•

The MX1 is a very compact speaker fitted with a coaxial 6.5"/0.6" tweeter device. In this case, the coaxial technology is optimized to the maximum, since the high and low frequency transducers are physically aligned with each other, resulting in perfectly linear phase and frequency response. From an acoustic point of view, the 6,5" driver enables a perfect mid-range and vocal reproduction while the tweeter offers the precision of the best studio monitor or Hi Fi speakers. This exclusive coaxial assembly produces a perfectly coherent and consistent sound field across a wide 120° conical dispersion over 10 KHz.

The MX1 is available in four different versions: MX1 in natural varnished wood (beech); MX1PN with a black paint finish; MX1GN in black paint finish with grill; or MX1GB in white paint finish with grill.

The MX1 is designed for nearfield listening, small and medium size sound systems as well as for additional distributed sound in large sites. Taking advantage of its compactness and its wide acoustical dispersion, the MX1 enables homogenous acoustic coverage with a limited quantity of speakers whilst remaining visually unobtrusive. When used in full range mode, the MX1 is ideal for conference applications, background music or as additional sound for large P.A. system as delay or front fill speaker. Combined with a subwoofer the MX1 constitutes a high quality surround system ideal for lounge bars and small private clubs. It is also suitable for "Home Theatre" applications or for background music in high class hotels and restaurants.

For low frequency reinforcement, the recommended subs are SUB12MX/N, SUB138P, SUB238S and TB115S.

Coaxial satellite speaker2-way passive, vented cabinet1 x 6,5", 1 annular tweeter

MX1

BENEFITSVersatility F.O.H./ stage monitoring•

"Studio monitor" sound reproduction•

Very low distortion•

Wide acoustic coverage pattern•

Perfect linear phase response•

APPLICATIONSHigh class sound system•

Distributed sound system•

Additional sound reinforcement•

Conference rooms & A/V market•

Theatre and surround system•

Hotels, restaurants, bars•

Monitoring & home theatre•

Fixed installation•

The MX2 is fixed installation mid range power speaker equipped with coaxial technology. Here, the coaxial technology is optimized to the maximum, since the high and low frequency transducers are physically aligned with each other, resulting in perfectly linear phase response. From an acoustic point of view, the 8" driver allows a very smooth reproduction in low frequencies while the tweeter offers the precision of the best studio monitor or Hi-Fi speakers. This exclusive coaxial assembly produces a consistent sound field across a wide 110° conical dispersion beyond 10 KHz.

The MX2 is available in two different versions: MX2 in natural beech wood finish or MX2N in black ash veneer finish. The MX2 can be installed in many ways: wall-, ceiling- or truss-mounted via its specific rotating lyre bracket (option ETMX2), or simply put on a shelf.

The MX2 is intended for small and medium size indoor sound systems as well as for additional distributed sound in large installations.

When used in full range mode, the MX2 is ideal for conference applications, background music or as additional satellites for a large P.A. system. Combined with subwoofers, the MX2 constitute a high quality surround system ideal for music applications in high class restaurants, cabarets or private clubs. It is also suitable for live music bars and small theatres.

For low frequency reinforcement, the recommended subs are SUB12MX/N, SUB138P, SUB238S and TB115S.

Indoor fixed installation coaxial speaker2-way passive, vented cabinet1 x 8", 1 annular tweeter

MX2

MIC

RO

AX

IAL

SE

RIE

S

MX2MX1GN MX1GB MX1PN

MX2N

* full range mode with processor

References MX1

Acoustic way / ModeTransducer (Ø coil)

2 way / mono amp1x6,5" (1,45") 1x Tweeter (0,6")

Bandwidth (+/- 3dB)Directivity @ -6dB

75Hz - 24kHz*120° conical

Nominal ImpedancePower AESRecommanded amplification

8 Ohm100W 50 to 200W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

94114120

Dimensions (H,L,P)Weight

200 x 200 x 212 mm5 kg

OPTIONS AND ACCESSORIESETMX1 Lyre bracket for MX1 and MX1N speaker

T50 Line transformer 70V / 100V, 50W

T100 Line transformer 70V / 100V, 100W

INOX0 Stainless steel screws and waterproof treatment cone driver

TROPIC0 Full treatment: wooden cabinet, screws and HP

REPEINT02 Special colour paint (RAL or PANTONE ref)

PROCESSORWithout Voice, background music

SPMX1 small and mid range power music

DMS26 mid range power, distributed sound

* full range mode with processor

References MX2

Acoustic way / ModeTransducer (Ø coil)

2 way / mono amp1x8" (1,75") 1x Tweeter (1")

Bandwidth (+/- 3dB)Directivity @ -6dB

65Hz - 24kHz*110° conical

Nominal ImpedancePower AESRecommanded amplification

8 Ohm150W 75 to 300W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

95116122

Dimensions (H,L,P)Weight

360 x 240 x 220 mm9 kg

OPTIONS AND ACCESSORIESETMX2 Lyre bracket for MX2 and MX2N speakers

T50 Line transformer 70V / 100V, 50W

T100 Line transformer 70V / 100V, 100W

PROCESSORWithout Voice, background music

SPMX2 mid range power music

LPMX2 high power music and live

DMS26 mid range power, distributed sound

Page 27: APG 2011 catalogue

Catalogue 201152 53

MIC

RO

AX

IAL

SE

RIE

S

The MX4N is a fixed installation speaker equipped with coaxial technology. The coaxial alignment of loudspeakers offers a perfectly coherent wide acoustic field. It results a very homogeneous conical coverage even in nearfield applications.

The MX4N is an extremely versatile product suited to a number of different FOH applications, with or without subwoofer. The ergonomics and the multiple optional accessories make it easy to work with architectural constraints: it can simply be put on the floor, suspended alone or in pairs, or fixed to the wall or the ceiling; it can receive special treatment for tropical environments or special colour coatings.

This loudspeaker is characterized by a very advantageous size/power ratio and its high reliability during extreme operation.

As a main speaker system, it is designed for medium range high precision indoor or outdoor applications. Used alone, the MX4 offers high intelligibility and clarity in vocal bandwidths, which is useful in theatres, house of worship or sporting venues. For music applications in full range mode, the use of a dedicated processor is mandatory in order to enhance the musical reproduction. Combined with subwoofers, the MX4N can be used to build a compact front of house system, well suited to clubs, cabarets and mid size concert halls.

For low frequency reinforcement, the recommended subs are: SUB238S, TB115S, TB118S or TB215S.

BENEFITSFull range performance•

Sonic clarity•

Size to SPL ratio•

High reliability•

Fixed installation accessories•

APPLICATIONSF.O.H application•

Additional system•

Theatres and multipurpose rooms•

Clubs & discotheques•

Fixed Installation•

Installation high power coaxial speaker2-way passive, vented cabinet 1 x 12", 1 x HF 1"

MX4N

BENEFITSVery compact size•

Sonic comfort•

Natural or Black varnish wood finish•

APPLICATIONSBass extension for MX1 and MX2•

Distributed sound system•

Home theatre•

Conference room and AV applications•

Indoor fixed installation•

The SUB12MX is a compact, portable low frequency speaker loaded with a dual interactive chamber. This exclusive acoustic load considerably reduces the air load volume, which increases the efficiency on the bandwidth and gives perfect control of diaphragm displacement.

SUB12MX has been developed as a low frequency complement for the MX1 or MX2. With its classic "Hi-Fi" finish style, it is dedicated to high standard indoors installations where design must be taken into consideration.

Two models are available: the SUB12MX in natural beech wood finish and the SUB12MXN in black ash veneer finish.

Thanks to its compactness it can easily be blended into any architectural environment. Sound systems created with MX1, MX2 and SUB12MX are specifically designed for conference rooms, small ballrooms, theatres, bars etc.

SPMX1 and SPMX2 processors provide system alignment, crossover, infrasonic and ultrasonic protection and distribution of signals for a two way stereo system with SUB12MX.

Indoor fixed installation low frequency speakerDual interactive chamber load1 x 12" (2,5" coil)

SUB12MX /N

MIC

RO

AX

IAL

SE

RIE

S

SUB12MX

* full range mode with processor

References MX4N

Acoustic way / ModeTransducer (Ø coil)

2 way / mono amp1x8" (2,5") 1x HF 1" (1,75")

Bandwidth (+/- 3dB)Directivity @ -6dB

55Hz - 19kHz*100° conical

Nominal ImpedancePower AESRecommanded amplification

8 Ohm350W 250 to 700W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

98124130

Dimensions (H,L,P)Weight

620 x 420 x 347 mm24 kg

OPTIONS AND ACCESSORIESFAERO4 4 Aeroquip™ flying rings

ETMX4 Lyre bracket for MX4N

T200 Line transformer 70V / 100V, 200W

INOX01 Stainless steel screws and waterproof treatment cone driver

TROPIC02 Full treatment: wooden cabinet, screws and HP

REPEINT04 Special colour paint (RAL or PANTONE ref)

PROCESSORWithout Voice, background music

SPMX4 mid range power music

LPMX4 high power music and live

DMS26 mid range power, distributed sound

References SUB12MX /N

Acoustic way / ModeTransducer (Ø coil)

1 way / mono amp1x12" (2,5")

Bandwidth (+/- 3dB)Directivity @ -6dB

40Hz - 100HzOmnidirectional

Nominal ImpedancePower AESRecommanded amplification

8 Ohm300W 200 to 600W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

98120126

Dimensions (H,L,P)Weight

350 x 430 x 480 mm19 kg

OPTIONS AND ACCESSORIESFAERO4 4 Aeroquip™ flying rings

PROCESSORMandatory for all applications

Page 28: APG 2011 catalogue

SU

BW

OO

FERSUBWOOFER

SUB138P

Compact low frequency speaker

SUB238S

High power compact low frequency speaker

TB115S

High power compact low frequency speaker

TB118S

High power compact very low frequency speaker

TB215S

Very high power low frequency speaker

TB218S

Very high power very low frequency speaker

55Catalogue 201154

Page 29: APG 2011 catalogue

Catalogue 201156 57

SU

BW

OO

FER

BENEFITSHigh precision bass reproduction•

Small size•

Ease of handling•

APPLICATIONSFixed installation •

High precision bass reinforcement•

Distributed sound system•

Compact mobile system•

The APG SUB138P is a compact, portable low frequency speaker loaded with a dual interactive chamber. This exclusive acoustic load considerably reduces the air load volume, which increases the efficiency on the bandwidth and gives perfect control of diaphragm displacement.

The SUB138P is designed for low frequency reinforcement of small to large systems when floor space is at a premium.

In fixed installations, the reduced dimensions of the cabinet enable it to be easily integrated into the room design, for example below seats, below a small stage or flown from the ceiling. It is ideal for theatres, conference room, sound reinforcement and multi-media applications.

The SUB138P is an ideal element in efficient and compact FOH systems for bars, small clubs or mobile sound systems. This subwoofer is perfect for distributed sound in large scale installations.

Its compactness offers very discreet low frequency reinforcement for "drum fill" applications. The SUB138P reproduces frequency bandwidth from 45 Hz allowing very precise low frequency reproduction even in difficult acoustic environments.

The SUB138P must be used with processors and the speakers for which it is recommended.

Compact low frequency speakerDual interactive chamber load1 x 15" (3" coil)

SUB138P SUB238SHigh power compact low frequency speakerDual interactive chamber load2 x 15" (4" coil)

BENEFITSHigh max SPL•

Size/power ratio•

Sonic impact and precision•

APPLICATIONSFixed Installations•

High power bass reinforcement•

Single use or coupling stack•

The SUB238S is a high power compact subwoofer loaded with a dual interactive chamber. The double interactive load provides excellent control of transducer displacement, which significantly increases mechanical reliability.

The SUB238S is designed for high power low frequency reinforcement and offers great flexibility in a variety of applications.

The SUB238S is characterized by its extreme compactness that offers an unquestionable advantage in acoustically difficult environments where infra low frequencies can very often create an acoustic masking effect on the rest of the spectrum and therefore impair the whole intelligibility.

The SUB238S provides a very dynamic and punchy sound for the effects that are commonly found in electronic music where the whole dynamic capacity of systems is used. The sound reproduction of the SUB238S is defined by a very dynamic and precise low frequency reproduction which is ideally suited to today’s club-style music. Therefore the SUB238S is a flexible subwoofer for any type of application, either indoor or outdoor.

The SUB238S must be used with processors and the speakers for which it is recommended.

SU

BW

OO

FER

References SUB138P

Acoustic way / ModeTransducer (Ø coil)

1 way / mono amp1x15" (3")

Bandwidth (+/- 3dB)Directivity @ -6dB

45 - 300Hz*Omnidirectional

Nominal ImpedancePower AESRecommanded amplification

8 Ohm500W 300 to 1000W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

100125130

Dimensions (H,L,P)Weight

360 x 490 x 540 mm27 kg

OPTIONS AND ACCESSORIESFAERO4 4 Aeroquip™ flying rings

INOX02 Stainless steel screws and waterproof treatment cone driver

TROPIC02 Full treatment: wooden cabinet, screws and cone driver

REPEINT04 Special colour paint (RAL or PANTONE ref)

PROCESSORMandatory for all applications

References SUB238S

Acoustic way / ModeTransducer (Ø coil)

1 way / mono amp2x15" (4")

Bandwidth (+/- 3dB)Directivity @ -6dB

40 - 500Hz*Omnidirectional

Nominal ImpedancePower AESRecommanded amplification

4 Ohm2000W 1500 to 4000W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

103134138

Dimensions (H,L,P)Weight

440 x 950 x 587 mm54,5 kg

OPTIONS AND ACCESSORIESFAERO4 4 Aeroquip™ flying rings

INOX03 Stainless steel screws and waterproof treatment cone driver

TROPIC04 Full treatment: wooden cabinet, screws and HP

REPEINT06 Special colour paint (RAL or PANTONE ref)

PROCESSORMandatory for all applications

* without processeur * without processeur

Page 30: APG 2011 catalogue

Catalogue 201158 59

SU

BW

OO

FER

BENEFITSSonic impact and precision•

Very low distortion•

Compactness & ease of handling•

Optional touring accessories•

APPLICATIONSHigh precision bass reinforcement•

F.O.H or stage monitor systems•

Mobile system•

"Cardioid" arrangement•

The TB115S is equipped with a convection cooled neodymium 15" woofer and loaded with a low pass type double interactive chamber. This type of load enables a 3 dB gain on the bandwidth. The front chamber opens onto a K-horn™ design giving it an additional 3 dB gain. Associated with the convection cooled technology used with the neodymium woofer, thermal compression is reduced by nearly 2 dB. All these optimizations naturally lead to a very impressive dynamic and an important max SPL.

The TB115S subwoofer offers both high quality ergonomics and high level sonic performance. It provides an extremely advantageous power/size ratio. Its sound pressure capacity associated to its high quality sound reproduction generates a strong physical kick. The acoustic load provides excellent control over the diaphragm displacement increasing the mechanical reliability while diminishing the harmonic distortion.

The cabinet is specifically designed to enable one person to handle it on his own.

Taking advantage of its asymmetric shape, the TB115S is suitable for various configurations: network line, cardioid source, "sub arc" design, etc.

APG supplies presets and parameters for all these configurations.

High power compact low frequency speakerComplex horn loaded band pass load1 x ventilated 15" Nd (4" coil)

TB115S

BENEFITSSonic comfort and impact•

Very low distortion•

Compactness & ease of handling•

Optional touring accessories•

APPLICATIONSHigh precision infra bass reinforcement•

F.O.H or stage systems•

Cardioid arrangement•

Fixed installation and mobile use•

The TB118S subwoofer is equipped with a convection-cooled neodymium 18" woofer loaded by a low pass type double interactive chamber. This helps distribute and limit load volume in order to obtain excellent size/acoustic power ratio. This unique load combination (double chamber & K-horn) results in an additional 4 dB gain in the usable bandwidth compared to conventional direct radiation subwoofers.

The TB118S combines high acoustic performance with highly user-orientated ergonomics. It is characterized by its capacity to produce extraordinarily high sound pressure levels with accurate sound reproduction, precision and warmth. The dual interactive load offers an excellent control over the diaphragm displacement which increases the mechanical reliability and reduces the harmonic distortion, compared to conventional direct radiating subwoofers.

Its clever design enables all type of handling by only one person. The compactness of the TB118S makes it suitable for fixed installations where space is at a premium, while the ease of handling will be appreciated by touring companies.

The TB118S subwoofer is mainly to offer exceptional energy and musicality in the low frequency bandwidth. The format of the TB118S is perfectly suited to creating network sources and managing low frequency directivity such as cardioid configurations, line source configurations, arc configurations, etc.

APG supplies presets and parameters for all afore-mentioned configurations.

High power compact very low frequency speakerComplex horn loaded band pass load1 x ventilated 18" Nd (4" coil)

TB118S

SU

BW

OO

FER

59* without processeur ** ND = magnetic neodimuim compression driver

References TB115S

Acoustic way / ModeTransducer (Ø coil)

1 way / mono amp1x15"ND (4")**

Bandwidth (+/- 3dB)Directivity @ -6dB

45 - 200Hz*270°

Nominal ImpedancePower AESRecommanded amplification

8 Ohm1150W 800 to 2300W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

102132138

Dimensions (H,L,P)Weight

530 x 600 x 600 mm36 kg

OPTIONS AND ACCESSORIESKR80 80 mm rotating wheels (x 4)

SCTB115S Soft cover for TB115S

FAERO4 4 Aeroquip hooks

INOX03 Stainless steel screws & cone driver waterproof treatment

TROPIC03 Full treatment: cabinet, screws & cone driver waterproof treatment

REPEINT06 Special colour paint (RAL or PANTONE ref)

PROCESSORMandatory for all applications

* without processeur ** ND = magnetic neodimuim compression driver

References TB118S

Acoustic way / ModeTransducer (Ø coil)

1 way / mono amp1x18"ND (4")**

Bandwidth (+/- 3dB)Directivity @ -6dB

40 - 140Hz*270°

Nominal ImpedancePower AESRecommanded amplification

8 Ohm1300W 800 to 2600W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

102133139

Dimensions (H,L,P)Weight

530 x 810 x 600 mm43 kg

OPTIONS AND ACCESSORIESKR100 100 mm rotating wheels (4 pieces)

KR125 125 mm rotating wheels (4 pieces)

SCTB118S Soft cover for TB118S

FAERO4 4 Aeroquip™ flying rings

INOX03 Stainless steel screws and waterproof treatment cone driver

TROPIC03 Full treatment: wooden cabinet, screws and HP

REPEINT06 Special colour paint (RAL or PANTONE ref)

PROCESSORMandatory for all applications

Page 31: APG 2011 catalogue

Catalogue 201160 61

SU

BW

OO

FER TB215S

Very high power low frequency speakerComplex horn loaded band pass load2 x ventilated 15" Nd (4" coil)

The TB215S is equipped with two convection-cooled neodymium 15" woofers, mounted in a complex dual interactive K-Horn chamber. This exclusive load makes it possible to limit the enclosure volumes of the loudspeakers. K-Horn technology allows creating an active horn, allowing a gain of 4 dB on the selected bandwidth. The dual chamber provides excellent control of transducer displacement increasing their mechanical reliability. Convection-cooling technology used with the neodymium transducers reduces thermal compression which gives the TB215S an exceptional acoustic pressure capacity.

The TB215S is characterized by a very high {efficiency X bandwidth} product conferring acoustic performance equivalent to that of a great number of subwoofers featuring 18" cone drivers.

The TB215S is a high performance subwoofer combining acoustic innovation and new design developed according to the requirement criteria of operators. It is characterized by an exceptional acoustic pressure capacity and a sound reproduction with impressive impact.

The choice of 15" woofers provides a real acoustic versatility between FOH applications for which crossover is between 60 Hz & 80 Hz and stage monitor applications for which crossover can be set up to 160Hz. This flexibility is also applicable with main systems based on 15" or 12" drivers.

The TB215S subwoofer is designed for low frequency reinforcement in high power long throw configurations or for indoor or outdoor applications with medium size power systems. It offers a very high musical quality, thanks to its frequency response, and a very low level of distortion even at extremely high power.

BENEFITSVery high SPL capacity•

Sonic impact and physical sensation•

Light weight•

Compactness & ease of handling•

Optional touring accessories•

APPLICATIONSBass and low-mid sound reinforcement•

Very high power bass reproduction•

FOH & stage versatility•

Single use or coupling stack•

Cardioid arrangement•

Fixed installation and mobile use•

BENEFITSExceptional max SPL & efficiency•

Sound pressure•

"Touring" Ergonomics•

APPLICATIONS

Very high power infra bass reinforcement•

Single use or coupling stack•

Cardioid arrangements•

Large coupling stack•

The APG TB218S is fitted with two convection-cooled neodymium 18" cone speakers, mounted in a complex dual interactive K-horn™ chamber. This exclusive acoustic load reduces load volume and creates a horn effect that increases efficiency by 4 dB and enables diaphragm displacement control. Convection-cooling technology used with the neodymium transducers reduces thermal compression which gives the TB215S an exceptional acoustic pressure capacity.

The TB218S boasts a very high {efficiency X bandwidth} product, making it one of the most efficient subs on the market.

The TB218S is a very high-power subwoofer, combining the latest technological breakthroughs with user-oriented ergonomic design. It is capable of producing exceptionally high sound pressure levels, whilst offering punch, warmth and precision.

The structural design of the cabinet, in conjunction with the use of neodymium magnets account for a significant weight reduction in comparison with traditional designs, to the point where all handling and shifting, except straight lifting, can be done by just one person.

The TB218S is ideal for applications requiring high SPL at very low frequencies. The frequency response, low distortion level and reduced thermal compression meet and indeed exceed the demands of today’s audio professionals..

Taking advantage of its sonic flexibility, the TB218S is the complement of choice for Matrix Array systems, for Isoline Series, for Beam Series and large-scale systems based on 15" Dispersion series speakers.

Very high power very low frequency speakerComplex horn loaded band pass load2 x ventilated 18" Nd (4" coil)

TB218S

SU

BW

OO

FER

* without processeur ** ND = magnetic neodimuim compression driver

OPTIONS AND ACCESSORIESKR100 100 mm rotating casters (4 pieces)

KR125 125 mm rotating casters (4 pieces)

SCTB215S Soft cover for TB215S

FAERO4 4 Aeroquip™ flying rings

INOX03 Stainless steel screws and waterproof treatment cone driver

TROPIC04 Full treatment: wooden cabinet, screws and HP

REPEINT07 Special colour paint (RAL or PANTONE ref)

PROCESSORMandatory for all applications

References TB215S

Acoustic way / ModeTransducer (Ø coil)

1 way / mono amp2x15"ND (4")**

Bandwidth (+/- 3dB)Directivity @ -6dB

40 - 300Hz*270°

Nominal ImpedancePower AESRecommanded amplification

4 Ohm2300W 1800 to 3600W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

104137143

Dimensions (H,L,P)Weight

600 x 960 x 600 mm55 kg

* without processeur ** ND = magnetic neodimuim compression driver

References TB218S

Acoustic way / ModeTransducer (Ø coil)

1 way / mono amp2x18"ND (4")**

Bandwidth (+/- 3dB)Directivity @ -6dB

35 - 250Hz*270°

Nominal ImpedancePower AESRecommanded amplification

4 Ohm2600W 1800 to 3600W

Efficiency dB SPL @1W/1mContinuous dB SPL level @1mdB SPL max level @1m

105138144

Dimensions (H,L,P)Weight

716 x 1160 x 716 mm74 kg

OPTIONS AND ACCESSORIESKR100 100 mm rotating wheels (4 pieces)

KR125 125 mm rotating wheels (4 pieces)

SCTB218S Soft cover for TB218S

FAERO4 4 Aeroquip™ flying rings

INOX03 Stainless steel screws and waterproof treatment cone driver

TROPIC04 Full treatment: wooden cabinet, screws and HP

REPEINT07 Special colour paint (RAL or PANTONE ref)

PROCESSORMandatory for all applications

Page 32: APG 2011 catalogue

Catalogue 201162

PROCESSORSAPG PROCESSING : ADAPTABILITY & VERSATILITY

"SP" type static processor

"LP" type dynamic loudspeaker processor

Digital processor DMS26

Networking & distant control

TOOLSTECHNICAL SUPPORT & APG TOOLS

APG Project Guide

EASE Simulation

Uniline Aiming Tool

Matrix Aiming Tool

OPTIONSCustom Design

Special options

Custom products

ACCESSORIES

PR

OC

ES

SO

RS

, TO

OLS

,O

PTI

ON

S &

AC

CE

SS

OR

IES

63

Page 33: APG 2011 catalogue

Catalogue 201164 65

PR

OC

ES

SO

RS APG PROCESSING: ADAPTABILITY & VERSATILITY

Scientific research based on mathematical analysis of all the operating parameters of loudspeakers has provided guidance for the design of specific processors, which guarantee flawless system reliability.

In accordance to the expected level of control and reliability, APG produces many types of analog processors and one digital processor.

"SP" type Static ProcessorStatic processors are usable for application where the system is not run at its maximum dynamic capacity.

For any passive speaker models of small and medium power APG offers a first level of signal treatment with the "SP" type processors.

These models are designed for optimizing frequency response and providing sub and ultra-sonic protection. They include filters, crossovers, EQs for full range mode and stereo + sub mono mode

The SPWX processor is designed to optimize the operation of the DX12 and DX15 speakers in stage monitoring applications.

"LP" type dynamic Loudspeaker ProcessorDynamic processors are required for high-power applications and live sound.

The active processors include a real time protection system where an analogue calculator permanently monitors the operational parameters of speakers. They provide loudspeaker protection by the simulation of destructive parameters (displacement of cone, temperature of coil, distortion (clip) of amplifiers) allowing the maximum power capacity of the speakers to be used, with the highest sonic performance and reliability.

They control all the active filtering, equalisation and topology-related settings of the system in 4 using mode: nearfield (stage monitoring) or far field (FOH) either with or without subwoofer.

It is possible to feed the sub channel from an external source provided by a mixing console or a digital processor. Additional EQ function allows the adjustment of clarity of the system.

A selection switch bank allows adapting the subwoofer to the main speakers. Functions allow the phase alignment and optimization of satellite/sub matching, taking the physical distance between speakers into consideration.

PR

OC

ES

SO

RS

Digital processors DMS26

Together with the development of dedicated loudspeaker processors, APG also offers a digital processor useful in two applications:•themanagementsystemfor"Touring"or"FixedInstallation",i.e.roomEQ,levelcontrols,andtimealignmentofcomplex sound systems.•thespeakerprocessingofmultiwayormultipurposemodularsystemslikeSMX15orUNILINE.

The DMS26 is based on a high level electronic design guaranteeing high quality sound reproduction in line with the philosophy of APG speakers. The PWAPG software allows total control over a DMS26 via a computer. Upon request, APG can provide users with speaker presets and standard or tailor made configurations.

The PWAPG software allows total control over a DMS26 via a computer. Upon request, APG can provide users with speaker presets and standard or custom configurations.

Networking and distant controlTwo solutions of distant control of the DMS26 are available : •bytheintegratedRS232port(onlyoneDMS26) •throughtheoptionalBvNetnetworksystem(upto119DMS26)

Optional BVNETADAPT interface (USB and serial port RS232 connexion) Optional BVNETCARD card

SP type processor

LP type processor

DMS26

MX1 MX2 MX4 MC1 MC2 /C DS8 DX12 DX15 DS15S SMX15

VocalLow power

Optional Optional Optional Optional Optional Optional Optional Optional LPDS15S DMS26

MusiqueMedium power

SPMX1DMS26

SPMX2DMS26

SPMX4DMS26

SPMICRODMS26

SPMICRODMS26

SPM8DMS26

SPX12DMS26

SPX15DMS26

LPDS15S DMS26

Live musicHigh power

Ø LPMX2 LPMX4 Ø Ø LPDS8 LPDX12 LPDX15 LPDS15S DMS26

Stage monitoring Ø Ø Ø SPR SPR SPR SPWX SPWX LPDS15S DMS26

Page 34: APG 2011 catalogue

Catalogue 201166 67

TOO

LS

EASE SimulationFor complete acoustic studies APG provides Speaker Data for EASE 3, EASE 4 and EASE Focus.

TECHNICAL SUPPORT & APG TOOLS

Whatever the performance specifications of a system, the final quality of an installation is mainly dependent on the acoustic source choice, its positioning and configuration as well as final tuning. APG offers a wide choice of measurement, calculation & prediction tools which allows sound professionals to reach an unprecedented level of results in terms of performances.

Bearing in mind the competence of their clients, APG R&D engineers permanently ensure an advanced level of technical support, so that any solutions are optimally adapted to all the technical and economic criteria of the projects.

APG has developed two different "project validation" tools to have your sound installation project validated by our R&D department. These tools are the "APG Project file" and "APG Project guide" software.

APG Project GuideThe APG Project Guide is a dedicated acoustic simulator.

It provides sound coverage evaluation of an APG based system in a given venue. It is usable as technical sales support as well as a design tool for a touring engineer. Since different types of venues are preloaded, only a restricted number of parameters must be entered in order to get the simulation going. Thanks to a tutorial approach and perfectly intuitive interface, simulating a system is only a matter of minutes, giving access to the requisite information including direct/total level, direct-to-reverb ratio and intelligibility.

TOO

LS

Uniline Aiming ToolThe UNILINE Aiming-Tool TM is dedicated to calculate and determine with precision all the mechanical adjustments of the UNILINE clusters according to the simulated acoustic characteristics. It is possible to edit the dimensions of the site, the geometry and inclination of the listening planes (floors and raked seating) and also the place of 3 virtual listening or measurement points (mix, mic1 and mic2)

The software enables to link the geometry and acoustics of the system and predict the angulations and mechanical variables (position of brackets on the bumper).

After editing the model of the site (a pit, raked seating, and two balconies is the maximum configuration that can be simulated), the software gives the visualization of the coverage predicted of a Uniline cluster and the visualization of the simulated acoustic levels per octave band.

Three curves at different frequencies are displayed simultaneously. The algorithms are based on real acoustic measurements to take into account the properties of the waveguides that are used.

The mechanical simulation enables to print out a full report, including a mechanical certification for the structure, together with the geometrical characteristics (position of different moving parts, rigging motor points, size of the system etc.)

Matrix Aiming ToolAPG Matrix Array Systems provide excellent ergonomics and a control of directivity, making it possible to vary both the length of throw and the horizontal dispersion. The purpose of the Matrix Aiming Tool calculator is to study and optimize the acoustic and mechanical aspects of the "cluster" configuration needed to provide the required coverage. It has been shown to halve installation time. The system engineer will be able to print out the configuration, showing the number of columns and lines of enclosures, the type of each enclosure, horizontal and vertical coupling angles etc, and will obtain a full report intended for the technical teams in charge of the rigging.

EASE 4EASE 3 EASE FOCUS

Page 35: APG 2011 catalogue

69

OP

TIO

NS

OPTIONS

Custom DesignBeyond APG’s standard range of products, the R&D department dedicates its manufacturer’s expertise to product customisation (finishing, painting, rigging) or product developments that will provide solutions for integration and operation in very specific markets and for adaption to acoustic or weather environment constraints.

Special OptionsAPG loudspeakers can be adapted to your projects’ special requirements, offering a number of different options. Two levels of "waterproof treatment" can be applied to the speakers to provide protection and an increase in mechanical reliability after exposure to the elements. The speakers can also be supplied in various colours or with specific finishes. For configuration in distributed sound systems, most of the speakers can be fitted with 70V or 100V transformers with a suitable power value

SIMPLE WATERPROOF PROTECTION: STAINLESS STEEL SCREWS & LOUDSPEAKER TREATMENT

INOX01 Stainless steel screws and waterproof treatment cone driver Category 1 : Micro Series & Dispersion Series

INOX02 Stainless steel screws and waterproof treatment cone driver Category 2 : SUB138P, TB115S

INOX03 Stainless steel screws and waterproof treatment cone driver Category 3 : SUB238S, TB118S, SC25

FULL WATERPROOF PROTECTION: SIMPLE PROTECTION + POLYESTER COATING

TROPIC0 Full treatment: wooden cabinet, screws and HP Category 0 : MX1/N, MX2/N, SUB12MX/N

TROPIC01 Full treatment: wooden cabinet, screws and HP Category 1 : MC1, MC2, MC2C, DS8

TROPIC02 Full treatment: wooden cabinet, screws and HP Category 2 : MX4, DS15S, SUB138P

TROPIC03 Full treatment: wooden cabinet, screws and HP Category 3 : TB115S

TROPIC04 Full treatment: wooden cabinet, screws and HP Category 4 : SUB238S, TB115S, SC25

PAINTING OPTION WITH RAL OR PANTONE REF

PREPEINT Paint set up regardeless of quantity or colour

REPEINT01 Special colour paint (RAL or PANTONE ref) Category 1 : Brackets for Micro Series & Dispersion Series

REPEINT02 Special colour paint (RAL or PANTONE ref) Category 2 : MX1

REPEINT03 Special colour paint (RAL or PANTONE ref) Category 3 : MX2, MC1, MC2, MC2C, DS8, SUBMX

REPEINT04 Special colour paint (RAL or PANTONE ref) Category 4 : DS12S, DS15/S, SUB138P

REPEINT05 Special colour paint (RAL or PANTONE ref) Category 5 : DS15R

REPEINT06 Special colour paint (RAL or PANTONE ref) Category 6 : SUB238S, TB115S, TB118S

REPEINT07 Special colour paint (RAL or PANTONE ref) Category 7 : 4000HI, 4000LO, SC25

OP

TIO

NS

Custom productsAPG has a long tradition of taking into account the needs of the operators and the requirements of the industry. That’s how the APG range has been expanded by the addition of specific products, edicated to particular applications or venues. Product definition for a custom product is based on a requirement and a set of desired specifications. Research and development are then conducted in collaboration between the R&D team and the customer.

A few examples are :

•DS1RstagemonitorforthecompanyDispatch.•SpecificinstallationMC2CspeakerforthecompanyAudiomaster.•DS15SRhighpowerstagemonitorfortherentalcompanySlade.•MC1RVultralowprofileTVstagemonitorfortherentalcompanyLocson.•MX1RhighprecisionTVstagemonitorforthepubliccompanySFP(SociétéFrançaise de Production).

Catalogue 201168

MC2CDS15SR MC1RV MX1R

TB215S SMX15

Page 36: APG 2011 catalogue

Catalogue 201170 71

AC

CE

SS

OR

IES

FIXING AND RIGGING SYSTEMS

FLIGHT CASES AND SOFT COVERS

LINE TRANSFORMERS AND GAIN TRANSLATORS

CONNECTING PATCH

AC

CE

SS

OR

IES ACCESSORIES

A comprehensive range of accessories is available for optimisation of installation and operation of the APG systems.

MATRIX ARRAY SYSTEM ACCESSORIES

UNILINE SYSTEM ACCESSORIES

TRANSPORTATION OPTIONS

71

QFS4

ETMC1

KCH2 + RAIA

ULTRCH2

SCTB215S

T50 et T100

PCM

ULTRUSSTP

FCUL210H3

UL210WB

KR100 KR125

3RC

ETDX12

PFM + RAIA

4000PR Transportation trolley for Matrix 40006000PR Transportation trolley for Matrix 3x6000 / 4x4000

6TRUSS Lifting truss for touring application for Matrix Array configuration

4RCAV Front vertical coupling piece for APG40004RCAR Rear vertical coupling piece for APG4000

6LB Lift bar + 2 shackles for 2 columns of Matrix Array

6RCAV Front vertical rigging piece for Matrix 6000 speakers6RCAR Rear vertical rigging piece for Matrix 4000 and 6000 speakers6RAAV Front horizontal coupling piece for 6TRUSS6RAAR Rear horizontal coupling piece for 6TRUSS

QRP23EL Quick Release Pin L=23mm with sling (4000 and 6000 backside)QRP43 Quick Release Pin L=43mm (front 4000 )QRP43EL Quick Release Pin L=43mm with sling (front 6000)

ELQRP Sling for Quick Release Pin QRP23 & QRP43

UL210WB Wheel Board Dolly for UL210 (up to 6 speakers)UL115BWB Dolly for UL115B (up to 4 speakers)

ULTRUSS Truss for Uniline system (lifting and stacking)ULTRUSSSP ULTRUSS option: 4 steps for stacking

FCUL210H3 Flight Case Bell for 3 x UL210 on wheelboardFCUL115H2 Flight Case Bell for 2 x UL115B on wheelboardFCUL210V2 Flight Case for 2 x UL210 in verticalFC2ULTRUSS Flight Case for 2 APG ULTRUSS

3000CPR Wheel board with strap 1 x 3000C speaker

KR80 80 mm rotating wheels (x 4)KR100 100 mm rotating wheels (4 pieces)KR125 125 mm rotating wheels (4 pieces)

FAERO4 4 Aeroquip™ flying rings

QFS4 4 Quick Flying System pieces for DX12 and DX15 12ATP90 Angle Tuning Plate (0°-90°) for ETDX1215ATP90 Angle Tuning Plate (0°-90°) for ETDX15

ETMX1 Lyre bracket for MX1 MX1 /MX1PN / MX1GB /MX1GNETMX2 Lyre bracket for MX2 / MX2NETMX4 Lyre bracket for MX4NETMC1 Lyre bracket for MC1 ETMC2 Lyre bracket for MC2 speakerETMC2C Fixed installation lyre bracket for MC2CETDS8 Lyre bracket for DS8ETDS12S Lyre bracket for DS12SETDS15 Lyre bracket for DS15ETDS15S Lyre bracket for DS15S ETDX12 Lyre bracket with angle index for DX12ETDX15 Lyre bracket with angle index for DX15ETSMX15 Lyre bracket for SMX15 in fixed installationETSC25 Lyre bracket for SC25

KCH2 Horizontal coupling kit for 2 x MX4RAIA Rigging rail with angle adjustment for MX4

PFM L shape mount for wall installation

PL3000C Steel frame flying system3RC Lifting plate kit for 3000C (4 / speaker)

FCMX1 Flight Case for 2 x MX1FCDS8 Flight Case for 2 x DS8FCDX12 Flight Case for 2 x DX12FCDX15 Flight Case for 2 x DX15FCSMX15 Flight Case for 2 x SMX15FCSC25 Flight Case for SC25 + ETSC25

SCTB115S Soft cover for TB115SSCTB118S Soft cover for TB118SSCTB215S Soft cover for B215SSCTB218S Soft cover for TB218S

T50 Line transformer 70/100V, 50W (pour MX1, MX2, MC1)T100 Line transformer 70/100V, 100W (pour MX1, MX2, MC1, MC2/C, DS8)T200 Line transformer 70/100V, 200W (pour MC2/C, MX4, DS12S)

TG32 Gain Transformer, for amplifier 32 dB gain (-6dB)TG29 Gain Transformer, for amplifier 29 dB gain (-3dB)

PCM Mono connection patch (4 way input/link), 2U 4 in XLR, 4 out SPK4, 2 out SPK8PCS Stereo connection patch (8 way inputs), 2U 8 in XLR, 4 out SPK4, 2 out SPK8

15ATP90

6TRUSS

4RCAV

QRP43 et QRP23EL

6RCAV

4RCAR

6RCAAR

Page 37: APG 2011 catalogue

APGFRANCE-19bisruedesécoles-SiteValnor/ZIHaute-95500LeThillayTél:+33(0)130189270•Fax:+33(0)130189271•[email protected]•www.apg-audio.com