Apariencia de Block Corto Reman
1
Pantalla anterior Bienvenido: r080hem Producto: TRUCK ENGINE Modelo: C15 TRUCK ENGINE NXS16736 Configuración: C15 On-Highway Truck NXS00001-UP Information Release Information Release Information Release Information Release Memo Memo Memo Memo APPEARANCE CHANGE APPEARANCE CHANGE APPEARANCE CHANGE APPEARANCE CHANGE ON REMAN SHORT BLOCKS ON REMAN SHORT BLOCKS ON REMAN SHORT BLOCKS ON REMAN SHORT BLOCKS Número de medio Número de medio Número de medio Número de medio -PELJ1289 PELJ1289 PELJ1289 PELJ1289-00 00 00 00 Fecha de Fecha de Fecha de Fecha de publicación publicación publicación publicación -07/01/2011 07/01/2011 07/01/2011 07/01/2011 Fecha de Fecha de Fecha de Fecha de actualización actualización actualización actualización -25/07/2011 25/07/2011 25/07/2011 25/07/2011 APPEARANCE CHANGE ON REMAN SHORT BLOCKS SMCS - 1100 JULY 2011 DEALER INTERNAL USE ONLY INFORMATION RELEASE MEMO CAT® Reman PELJ1289 ©2011 Caterpillar APPEARANCE CHANGE ON REMAN SHORT BLOCKS Announcement Reman will often employ advanced salvage technologies to mill a cylinder block deck to remove minor nicks, dents, or pitting. Where the deck height no longer meets print specs, the blocks may then have to be sprayed and remilled back to specification. These Reman blocks go out with an appearance like that seen in Figure 1. Figure 2 is a view of a block which has undergone advanced cleaning processes but did not require spraying and remilling to meet specifications. In this case, there may remain some evidence of prior use such as the staining that can be seen in Figure 2. This staining will not affect the performance of the block. The block assembly meets all of the reusability and salvage specifications as outlined in SEBF8076 Specifications to Salvage Contact Surfaces of Cylinder Blocks. To date, blocks with staining have been used in Reman Long Block and Engine products. Where needed to support Short Block requirements, the staining has been milled off often requiring spray processes to bring the surfaces back to specification. Effective with this notification, Cat Reman is announcing that customers in the future may begin to receive Short Blocks that have this staining. It is important they be made aware that the staining will not affect the performance, meets all the salvage and reuse guidelines and new part specifications, and that these short blocks are acceptable for use in any engine application. Reasons for Policy Change Cat Reman strives to provide cost effective repair options by converting used parts (cores) to good-as-new condition using a variety of advanced cleaning, advanced salvage, and strict process and quality controls. Reman parts deliver good-as -new quality, performance, and durability but won't necessarily look exactly the same as new. Cat Reman is committed to ensuring wear or damage in critical areas is addressed to return the part to print specifications but certain purely cosmetic issues should be viewed as an acceptable trade-off for the significant savings of the Reman product. Reman parts are not the solution for every customer in every situation. They are designed and manufactured to provide a comparable service life to an equivalent new part. Customers should be clear on what options are available and what the advantages / disadvantages of each are. They need to understand that Reman can be a cost effective repair solution and that it is the ability to salvage and reuse material in a cost effective manner that makes this option possible. Contact Information: Global Dealer Solutions Network Parts Technical Support Team Toll Free - North America: 1-877-228-2420 International: +1-309-266-4421 Email: [email protected] Copyright 1993 - 2014 Caterpillar Inc. Todos los derechos reservados. Red privada para licenciados del SIS. Fri Aug 1 16:29:20 EST 2014 r080hem Página 1 de 1 C15 On-Highway Truck NXS00001-UP(SEBP4186 - 66) - Sistemas y componentes 01/08/2014 https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage=/sisweb/sisweb/techdoc/techdoc_print_page.jsp
description
asksjncljasbijiadsbcvñjsdbljcbaslhbcljasbcljasbcjhbasljchbasjhcbhjasbchjasbcassc
Transcript of Apariencia de Block Corto Reman
-
Pantalla anterior
Bienvenido: r080hem
Producto: TRUCK ENGINE
Modelo: C15 TRUCK ENGINE NXS16736
Configuracin: C15 On-Highway Truck NXS00001-UP
Information ReleaseInformation ReleaseInformation ReleaseInformation Release MemoMemoMemoMemo APPEARANCE CHANGEAPPEARANCE CHANGEAPPEARANCE CHANGEAPPEARANCE CHANGE ON REMAN SHORT BLOCKS ON REMAN SHORT BLOCKS ON REMAN SHORT BLOCKS ON REMAN SHORT BLOCKS
Nmero de medioNmero de medioNmero de medioNmero de medio ----PELJ1289PELJ1289PELJ1289PELJ1289----00 00 00 00 Fecha deFecha deFecha deFecha de publicacin publicacin publicacin publicacin ----07/01/2011 07/01/2011 07/01/2011 07/01/2011 Fecha deFecha deFecha deFecha de actualizacin actualizacin actualizacin actualizacin ----25/07/201125/07/201125/07/201125/07/2011
APPEARANCE CHANGE ON REMAN SHORT BLOCKS SMCS - 1100
JULY 2011 DEALER INTERNAL USE ONLY
INFORMATION RELEASE MEMO
CAT Reman
PELJ1289 2011 Caterpillar
APPEARANCE CHANGE ON REMAN SHORT BLOCKS Announcement
Reman will often employ advanced salvage technologies to mill a cylinder block deck to remove minor nicks, dents, or pitting. Where the deck height no longer meets print specs, the blocks may then have to be sprayed and remilled back to specification. These Reman blocks go out with an appearance like that seen in Figure 1.
Figure 2 is a view of a block which has undergone advanced cleaning processes but did not require spraying and remilling to meet specifications. In this case, there may remain some evidence of prior use such as the staining that can be seen in Figure 2. This staining will not affect the performance of the block. The block assembly meets all of the reusability and salvage specifications as outlined in SEBF8076 Specifications to Salvage Contact Surfaces of Cylinder Blocks. To date, blocks with staining have been used in Reman Long Block and Engine products. Where needed to support Short Block requirements, the staining has been milled off often requiring spray processes to bring the surfaces back to specification.
Effective with this notification, Cat Reman is announcing that customers in the future may begin to receive Short Blocks that have this staining. It is important they be made aware that the
staining will not affect the performance, meets all the salvage and reuse guidelines and new part specifications, and that these short blocks are acceptable for use in any engine application.
Reasons for Policy Change
Cat Reman strives to provide cost effective repair options by converting used parts (cores) to good-as-new condition using a variety of advanced cleaning, advanced salvage, and strict process and quality controls. Reman parts deliver good-as-new quality, performance, and durability but won't necessarily look exactly the same as new. Cat Reman is committed to ensuring wear or damage in critical areas is addressed to return the part to print specifications but certain purely cosmetic issues should be viewed as an acceptable trade-off for the significant savings of the Reman product.
Reman parts are not the solution for every customer in every situation. They are designed and manufactured to provide a comparable service life to an equivalent new part. Customers should be clear on what options are available and what the advantages / disadvantages of each are. They need to understand that Reman can be a cost effective repair solution and that it is the ability to salvage and reuse material in a cost effective manner that makes this option possible.
Contact Information:
Global Dealer Solutions Network Parts Technical Support Team Toll Free - North America: 1-877-228-2420 International: +1-309-266-4421 Email: [email protected]
Copyright 1993 - 2014 Caterpillar Inc.
Todos los derechos reservados.
Red privada para licenciados del SIS.
Fri Aug 1 16:29:20 EST 2014
r080hem
Pgina 1 de 1C15 On-Highway Truck NXS00001-UP(SEBP4186 - 66) - Sistemas y componentes
01/08/2014https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage=/sisweb/sisweb/techdoc/techdoc_print_page.jsp
