AP2 ULTRAPARTS

LIST

GBC IS AN ACCO BRANDS COMPANY

8.0 PARTS LISTParts which have been assigned GBC’s seven digit part numbers are keyed with an Index Number for reference. This Index Number corresponds to the Part Number, Part Name and Quantity in the respective parts lists. If you need a part which does not have a GBC seven part number assigned, you will need to call GBC National Service Technical Support Group to obtain the part information. The Visual Index below should assist the technician in locating the appropriate parts list by grouping the lists based on physical location on or within the AP-2. The next page has a table that lists the figure numbers and the descriptions.

8.0 PARTS LIST

FIGURE 8.0.0 VISUAL INDEX

FIGURE DESCRIPTION 8.0.0 VISUAL INDEX 8.1.0 COVERS 8.2.0 FRONT VIEW 8.2.1 FRONT PLATE ASSEMBLY 8.2.2 KEYBOARD ASSEMBLY & LCD RIBBON CABLE ASSEMBLY 8.2.3 OVERLOAD ARM ASSEMBLY 8.2.4 REDIRECT LEVER ASSEMBLY 8.3.0 RIGHT VIEW (1 OF 2) 8.3.1 RIGHT VIEW (2 OF 2) 8.3.2 PICKHEAD ASSEMBLY & WEDGE ASSEMBLY 8.3.3 LID & SKATE ASSEMBLY 8.3.4 PUNCH DECK DOOR ASSEMBLY & DRIVER BAR MOUNT ASSEMBLY 8.3.5 PUNCH JUSTIFY ASSEMBLY 8.3.6 BACKGUAGE ASSEMBLY 8.3.7 REDIRECT ASSEMBLY 8.3.8 STACKER ASSEMBLY (1 OF 3) 8.3.9 STACKER ASSEMBLY (2 OF 3) 8.3.10 STACKER ASSEMBLY (3 OF 3) 8.4.0 TOP VIEW 8.4.1 INPUT HOPPER ASSEMBLY 8.4.2 INPUT HOPPER WEIGHT ASSEMBLY 8.5.0 LEFT & INSIDE VIEW (1 OF 2) 8.5.1 LEFT & INSIDE VIEW (2 OF 2) 8.5.2 DIESET CLAMP ASSEMBLY 8.5.3 MAIN MOTOR ASSEMBLY 8.5.4 CLUTCH & FLYWHEEL ASSEMBLY 8.6.0 REAR PLATE ASSEMBLY (1 OF 4) 8.6.1 REAR PLATE ASSEMBLY (2 OF 4) 8.6.2 REAR PLATE ASSEMBLY (3 OF 4) 8.6.3 REAR PLATE ASSEMBLY (4 OF 4) 8.6.4 ELECTRICAL PANEL ASSEMBLY 8.7.0 BASE ASSEMBLY 8.8.0 CABLES & HARNESSES

pxlamant

Note

Backguage Assy. 1774837 Obsolete!!

pxlamant

Note

1774874 is obsolete

pxlamant

Note

9950183 Obsolete 1771403 Obsolete 1771405 Obsolete

pxlamant

Note

1771429 Obsolete 9950192 Obsolete 9950208 Obsolete 9950165 Obsolete

ptherntj

Note

Photo sensor right angle 90 degree cap for redirect Sensor P/N 1774906. NOTE: You can not use this 90 degree cap on new redirect sensor only on old style sensor.

Power Transformer #6207003 readings 120 VAC going in termianls 12& 11 should read 0 volts AC. Terminals 9 & 7 should read 33 volts AC

jxh0a8b

Note

Chip Tray Switch 6202029

dxh0a83

Text Box

0177491100 SCRAP DEFLECTOR