8/19/2019 Antena Andrew 16dBi-5250 MHz Flat Panel

1/2

16 dBi Flat Panel Array Antenna, single-polarized, 5.25–5.875 GHz, SMA female flange, UV protected plastic off -white radome,no flash, standard pack—flat panel

FPA5150-16PM-1

 

CHARACTERISTICS 

General Specif ications

Packing Standard pack

Radome Color Off -white

Radome Material UV Protected Plastic

Reflector Construction Flat panel reflector

Antenna Input SMA Female

Antenna Type Flat Panel Array, unpressuriz ed

Diameter, nominal 0.15 m | 0.5 ft

Flash Included NoPolarization Single

Electrical Specifications

Beamwidth, Horizontal 25.0 °

Beamwidth, Vertical 25.0 °

Front-to-Back Ratio 25 dB

Gain, Mid Band 16.0 dBi

Operating Frequen cy Band 5.250 – 5.875 GHz

Return Loss 14.0 dB

VSWR 1.50

Mechanical Specif ications

Net Weight 0 kg | 1 lb

Packed Dimens ions

Heig ht 154.9 mm | 6.1 in

Len gth 154.9 mm | 6.1 in

Wid th 25.4 mm | 1.0 in

Product Specifications

©2011 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.

All specifications are subject to change. See www.commscope.com for the most current information.

page 1 of

9/21/201

8/19/2019 Antena Andrew 16dBi-5250 MHz Flat Panel

2/2

 

Regulatory Compliance/Certi f icat ionsAgency   Classification

ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

* Foo tno tes

Front-to-Back Ratio Denotes highest radiatio n relative to the main beam, at 180° ±40°, across the band.Production antennas do not exceed rated values by more than 2 dB unless stated otherwise.

Gain, Mid Band For a given frequency band, gain is primarily a function of antenna size. The gain of Andrewantennas is determined by either gain by comparison or by computer integration of themeasured antenna patterns.

Operating Frequency Band Bands correspond with CCIR recommendations or common allocations used throughout theworld. Other ranges can be accommodated on special order.

Packing Andrew standard packing is suitable for export. Antennas are shipped as standard in totallyrecyclable cardboard or wire-bound crates (dependent on product). For your convenience,Andrew offers heavy duty export packing options.

Return Loss The figure that indicates the proportion of radio waves incident upon the antenna that are

rejected as a ratio of those that are accepted.

VSWR Maximum; is the guaranteed Peak Voltage-Standing-Wave-Ratio within the operating band.

Product SpecificationsFPA5150-16PM-1

©2011 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.

All specifications are subject to change. See www.commscope.com for the most current information.

page 2 of

9/21/201