ANSYS APDL ´» ¾‚€¾µ½¸ - ssau.ru...

download ANSYS APDL ´» ¾‚€¾µ½¸ - ssau.ru ?»ƒ³¸½ .“...¾»Œ·¾²°½¸µ ansys apdl

of 68

  • date post

    12-Feb-2018
  • Category

    Documents

  • view

    242
  • download

    11

Embed Size (px)

Transcript of ANSYS APDL ´» ¾‚€¾µ½¸ - ssau.ru...

  • 1

    ..

    ( )

    ANSYS APDL

    2010

  • 2

    :

    , ,

    ,

    .

    ,

    ANSYS,

    .

    ANSYS

    (,

    )

    (,

    ,

    LS Dyna)

    .

    , 2010

  • 3

    1

    1.1. , ,

    1.2. .

    .

    1.3. ANSYS

    1.3.1. ( )

    ANSYS Product Launcher ( 1.1).

    1.1 ANSYS Product Launcher

    1.3.2. :

    License: ANSYS LS-DYNA

    1.3.3. ,

    Browse .

    1.3.4. ANSYS, Run.

    ANSYS LS_DYNA Utility Menu,

    ( 1.2).

    1.3.1

  • 4

    1.2 ANSYS LS_DYNA Utility Menu

    2.

    2.1

    2.1.1 rocessor (rr) Modeling

    Create ints (s) In Active CS,

    1.3.

    1.3

  • 5

    2.1.2 :

    N = 1;

    = 1;

    = 0;

    z = 0.

    2.1.3 1.

    .

    2.1.4 ,

    1:

    N = 2; = 2; = 1; z = 0;

    1.

    N = 3; = 3; = -1; z = 0, .

    2.2

    2.2.1. PrPr Create Lines

    Straight line.

    2.2.2.

    1 2, 2 3.

    2.2.3. Create Straight line.

    2.3

    2.3.1 Utility Menu (UM) lot ints.

    2.3.2 UM lotCtrls Numbering.

    2.3.3 ints numbers Line

    numbers ( 1.4).

    2.3.4 .

  • 6

    1.4 -

    2.4

    UM Plot Lines.

    2.5

    MM PrPr Delete Line and Below.

    2.5.2 ick all.

    2.6

    2.6.1. ( MM

    PrPr Create KPs In Active CS).

    2.6.2 :

    2.3.2

  • 7

    x y Z

    1 0 0 0

    2 0.3 0.1 0

    3 0.7 0.3 0

    4 1.0 0.4 0

    5 1.5 0.3 0

    6 2 1 0

    2.6.3 :

    UM Plot Ctrls Pan, Zoom, Rotate Fit ( 1.5).

    1.5

  • 8

    2.6.4 : MM Create Lines

    Splines Spline through KPs.

    2.6.5 (

    ).

    2.6.6 OK.

    2.7

    2.7.1 PrPr Delete Line only.

    2.7.2 .

    2.7.3 .

    2.7.4 PrPr Delete Keypoints.

    2.7.5 Pick All.

    2.8

    2.8.1 :

    X y Z

    1 0.35 0.4 0.0

    2 0.8 0.5 0.0

    3 1.3 0.15 0.0

    2.8.2 PrPr Create Lines Arcs through 3 KPs.

    2.8.3 ( 1 3),

    , ( 2)

    ( 1.6).

  • 9

    1.6

    2.8.4 OK.

    2.8.5 :

    A. MM PrPr Delete Line only;

    B. ;

    C. OK.

    2.8.6 PrPr Create Lines Arcs through 3 KPs.

    2.8.7 KP1 KP2, - KP3 (

    1.7).

    2.8.8 OK.

    2.8.5. 2.8.5.

  • 10

    1.7

    2.8.9 , .

    2.9

    2.9.1 PrPr Create Lines Arcs By End KPs & Rad

    2.9.2 ( KP1 KP2).

    2.9.3 OK.

    2.9.4 ( KP 3),

    , .

    2.9.5 OK.

    2.9.6 RAD =0.5 ( 1.8).

    2.8.6

    2.8.7

  • 11

    1.8

    2.9.7 OK.

    2.9.8 .

    2.10

    2.10.1 :

    x y Z

    1 0 0 0

    2 1 0 0.1

    3 1 1 -0.1

    4 0 2 0.3

    2.10.2 MM PrPr Create Areas Arbitrary through KPs.

    2.10.3

    ( 1.9).

    2.10.4 OK.

    2.9.6

  • 12

    1.9

    2.11

    2.11.1 UM PlotCtrls Pan-Zoom- Rotate.

    2.11.2 Dynamic

    Mode.

    2.11.3 , ,

    .

    2.11.4 , ,

    .

    2.11.5

    :

    Top ( ) Bot ( )

    Left ( ) Right ( )

    Front ( ) Back( )

    ISO (

    )

    2.10.2

  • 13

    2.11.6 :

    . Zoom;

    .

    ;

    .

    .

    2.11.7 Fit.

    2.11.8 ()

    () ( Rate).

    2.11.9 , ,

    , (

    ).

    2.11.10 (

    Rate).

    2.11.11

    Reset.

    2.12

    2.12.1 MM PrPr Delete Areas only.

    2.12.2 .

    2.12.3 OK.

    2.13

    2.13.1 UM Plot Lines.

    2.13.2 MM PrPr Create Areas Arbitrarys By lines.

    2.13.3 , .

    2.13.4 OK.

    2.14

    2.14.1 UM Files Clear & Start New OK

    2.15 ,

    2.15.1 :

  • 14

    x y z

    1 -2.0 0.0 0.0

    2 -1.0 0.5 0.0

    3 0.0 0.8 0.0

    4 1.0 0.4 0.0

    5 2.0 0.0 0.0

    1.10

    2.15.2 :

    MM Create Splines Spline through KPs ( 1.10).

    2.15.2

  • 15

    2.15.3 :

    x y z

    1 -2.0 -0.2 2.0

    2 -1.0 0.6 2.0

    3 0.0 0.8 2.0

    4 1.0 0.5 2.0

    5 2.0 -0.1 2.0

    1.11

    2.15.4

  • 16

    2.15.4 ( 1.11).

    2.15.5 :

    x y z

    1 -2.0 0.1 3.0

    2 -1.0 0.5 3.0

    3 0.0 0.7 3.0

    4 1.0 0.3 3.0

    5 2.0 0.1 3.0

    2.15.6 .

    1.12

    2.15.6

  • 17

    2.15.7 MM Create Areas Arbitrary By Skinning.

    2.15.8 .

    2.15.9 OK( 1.13).

    1.13

    2.15.10 .

    2.15.11 .

    2.16

    2.16.1 :

    2.15.7

  • 18

    x y Z

    1 0.0 0.0 0.0

    2 0.0 0.1 0.0

    3 0.06 0.1 0.0

    4 0.06 0.09 0.0

    5 0.05 0.09 0.0

    6 0.05 0.01 0.0

    7 0.04 0.01 0.0

    8 0.04 0.0 0.0

    2.16.2 KP1KP2,

    KP2KP3, KP3KP4, KP4KP5, KP5KP6, KP1KP8.

    2.16.3 KP6, KP7 KP8.

    2.16.4 ( 1.14):

    . UM PlotCtrls Numbering LINE ON OK;

    . UMPlot LINE.

  • 19

    1.14

    2.16.5 ( 1.15):

    . PrPr Operate Extrude/sweep Lines About Axis.

    . Pick All.

    . KP1 KP2, .

    D. OK.

    E. ARC=360.

    F. OK.

  • 20

    1.15

    2.16.6 .

    2.17

    2.17.1 PrPr Create Circle Partial Annulus.

    2.17.2 : wpx = 1; wpy = 1.

    2.17.3 Rad - 1 = 1(

    Rad-1=0).

    2.17.4 , x ,

    : Theta-1=45.

    2.17.5 : Rad-2 =2.

    2.17.6 , x ,

    : Theta-2=180.

    2.16.5.

    2.16.5.F

  • 21

    2.17.7 .

    2.17.8 .

    2.18

    2.18.1 PrPr Create Circle Annulus.

    2.18.2 : wpx=1; wpy=1.

    2.18.3 Rad -1=0.

    2.18.4 Rad -2 = 2.

    2.18.5. .

    2.18.6. .

    2.19.

    2.19.1. :

    x y Z

    1 0 0 0

    2 0 0.1 0

    3 0.1 0.1 0

    4 0.1 0 0

    5 0 0 0.1

    6 0 0.1 0.1

    7 0.1 0.1 0.1

    8 0.1 0 0.1

    2.19.2. PrPr Create Volumes Arbitrary through KPs.

    2.19.3. 1, 2, , 4, 5,

    6, 7 8 ( 1.16).

  • 22

    1.16

    2.19.4. .

    2.19.5. .

    2.20.

    2.20.1. , =3, =4,

    2.

    2.20.2. PrPr Operate Extrude Areas By XYZ offset.

    2.20.3. .

    2.20.4. .

    2.20.5. DX=2; DY=2; DZ=2 ( 1.17).

    2.20.6. 1.

  • 23

    1.17 -

    2.20.7. 1.

    2.20.8. .

    2.20.9. = -2; = -2; 2= -2.

    2.20.10. (Scale) : RX =0.5;

    RY =0.9; RZ =1 ( 1.18).

    2.20.11. .

    2.20.5

    2.20.6

  • 24

    1.18 -

    2.20.12. UM PlotCtrls Pan Rotate ISO.

    2.20.13. .

    2.21.

    2.21.1. PrPr Create Volumes Prism By Side length.

    2.21.2. Z1=0; Z2=4; NSIDES = 4; LSIDE = 3.

    2.21.3. .

    2.21.4. PrPr Copy Volumes.

    2.21.5. .

    2.21.6. .

    2.20.10

    2.20.11

  • 25

    2.21.7. : ITIME ( , ) = 3; DX=5; DY=5;

    DZ=5 (

    ) ( 1.19).

    2.21.8. .

    1.19 -

    2.22.

    2.22.1. PrPr Create Volumes Cone By Dimensions.

    2.22.2. : RBOT=2; RTOP=1; Z1=1; Z2=3; THETA1=0; THETA2=180

    ( 1.20).

    2.22.3. .

    2.22.4. UM PlotCtrls Pan Zoom Rotate ISO.

    2.21.7

    2.21.8

  • 26

    2.22.5. PrPr Reflect Volumes.

    2.22.6. .

    2.22.7. .

    2.22.8. OXZ (X-Z lane).

    2.22.9. .

    1.20 -

    2.22.10.

    2.23.

    2.23.1. :

  • 27

    x y Z

    1 -0.95 0.1 0

    2 -0.65 0.35 0

    3 -0.2 0.45 0

    4 0.3 0.4 0

    5 0.8 0.2 0

    6 1.25 -0.1 0

    7 1.65 -0.45 0

    2.23.2. .

    2.23.3. :

    1. PrPr Copy lines;

    2. ;

    3. ;

    4. : ITIME= 2; DX= 0; DY= -0.2; DZ= 0;

    5. .

    2.23.4. 1 8, 7 9

    .

    2.23.5. L1, L2, L3 L4 :

    1. PrPr Copy lines;

    2. L1, L2, L3 L4;

    3. ;

    4. : ITIME=2; DX=0; DY=0; DZ=2;

    5. .

    2.23.6. L1, L2, L3 L4

    L5, L6, L7 L8.

  • 28

    1.21 -

    2.23.7. .

    2.23.8. By Skinning

    L7 L, L8 L4, L6 L2, L5 L1.

    2.23.9. .

    2.23.10. 1...6 ( 21):

    1. PrPr Volumes Arbitrary By Areas;

    2. ( Pick All) ,

    ;

    3. .

    2.24 .

    2.24.1 PrPr Create Volumes Block By 2 corners & Z.

  • 29

    2.24.2 : wpx=0; wpy=0; Width=2; Height=2; Depth= -1.

    2.24.3 .

    2.24.4 PrPr Create Volumes Cylinder Solid Cylinder.

    2.24.5 : wpx=1.6; wpy=0.4; Radius=0.2; Depth=0.4.

    2.24.6 .

    2.24.7 UM Plot Ctrls Pan Zoom Rotate ISO.

    2.24.8 UM List Volumes(,

    ).

    2.24.9 UM Plot Lines.

    2.24.10 PrPr