ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL...
Transcript of ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL...
![Page 1: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/1.jpg)
Brent JohnsonTraction Auditing LLC
ANSI NFSI B101.0 Walkway Auditing Standard
![Page 3: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/3.jpg)
Slip and Fall Standards, Codes & Regulations
how they affect you, your clients… and your bottom line!
![Page 4: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/4.jpg)
Appearance is Everything…Right?
But what about safety?
![Page 5: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/5.jpg)
You Just Have to Start Looking at Things From a New Perspective
![Page 6: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/6.jpg)
How do you answer this objection…
It is so shiny so it must really be slippery!
![Page 7: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/7.jpg)
How do you answer this accusation…
We have had several customers slip and fall, this shiny floor you
installed is slippery, therefore you are being named in the suit as well!
![Page 9: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/9.jpg)
Standards Organizations
International - (ISO, ANSI, DIN)
National - (ANSI, ASTM)
Independent - (UL, NFSI)
![Page 10: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/10.jpg)
International Standards
International Standards Organization (ISO)
No Standard related to slips and falls
European Union (EU)
developing numerous methods from various European nations
Deutsches Institut für Normung e.V. (DIN; in English, the German Institute for Standardization)
DIN 51130 is related to slips and falls
![Page 11: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/11.jpg)
National Standards
American Society for Testing and Materials (ASTM)
4- industry specific Committees to address product slip resistance
D-21 - Floor Polishes - standard D-2047
C-21 - Ceramic tile - standard C-1028 withdrawn 02/2014
F-13 - Traction and Footwear - standard F-1637, F-2508 Tribometer Testing
F-06 - Resilient Floor Coverings - no standard
![Page 12: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/12.jpg)
National Standards
American National Standards Institute (ANSI)
ANSI/ASSE A1264
ANSI/NFSI B101
ANSI/TCNA A 137.1
Is the ISO member body for the USA
![Page 13: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/13.jpg)
![Page 14: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/14.jpg)
ASTM D-2047
Dry (leather) SCOF Test Method
Applies to Polish-coated flooring surfaces only
Derived from UL-410
SCOF Values of 0.5> are defined as having “adequate Slip Resistance”
James Machine Test Only
![Page 15: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/15.jpg)
ASTM C-1028 ceramic tile (withdrawn)
Wet/Dry (Neolite)SCOF Test Method
Applies to Ceramic tile and “Like Surfaces”
Does not establish any SCOF values
Horizontal Pull Meter
![Page 16: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/16.jpg)
ASTM F-13 Footwear & Traction
F-1637-”Practice for Safe Walking Surfaces” (Condensed version of A1264)
F-1677-96 (English XL) Withdrawn in 2006
F-1679-96 (Brungraber MK II) Withdrawn in 2006
F-2508-2011 "Standard Practice for Validation and Calibration of Walkway Tribometers using Reference Surfaces”
![Page 17: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/17.jpg)
ASTM F-06 Resilient Flooring
No Slip resistance standards
![Page 18: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/18.jpg)
![Page 19: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/19.jpg)
ANSI/ASSE A1264.2-2013
Applies only to workplaces and not the general public
Suggests that floors meet a minimum dry SCOF of 0.5
Addresses 4-areas
Floor Surface Characteristics
Footwear Traction Properties
Environmental Factors (Contaminants)
Human Factors (gait, Human Activity)
![Page 20: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/20.jpg)
ANSI/TCNA A137.1-2012
Wet DCOF test that applies to ceramic tile
Per the scope and purpose this standard applies as a Quality Control standard for uninstalled tile
Does not apply to installed tile in the field
Not applicable for testing polished concrete or other surfaces
![Page 21: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/21.jpg)
Your FloorsLook Like aMillion Bucks ...To the next victim of a slip-and-fall
![Page 22: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/22.jpg)
ANSI/NFSI B101.1-2009Test Method for Measuring Wet SCOF of Common Hard-Surface
Floor Materials
ANSI/NFSI B101.3-2012Test Method for Measuring Wet DCOF of Common Hard-Surface
Floor Materials
ANSI/NFSI B101.0-2012Walkway Surface Auditing Procedure for the Measurement of
Walkway Slip Resistance
National Floor Safety Institute P.O. Box 92607 Southlake, TX 76092 (817) 749-1700 [email protected]
![Page 23: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/23.jpg)
ANSI/NFSI B101.1-2009ANSI/NFSI B101.3-2012
Applies to ALL hard surface walkway surfaces (first ever uniform test method)
Can be used in both the laboratory and the field
Defines 3-wet COF Ranges or “Traction Levels”
High-Traction (0.60+SCOF - 0.42+ DCOF)
Moderate Traction (0.40-0.60 SCOF – 0.30-0.42 DCOF)
Low Traction (<0.40 SCOF - <0.30 DCOF )
![Page 24: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/24.jpg)
ANSI/NFSI B101.0-2012
Applies to ALL hard surface walkway surfaces (first ever uniform test method)
Defines procedures for walkway auditing
Defines walkway surfaces into three risk classes
Risk Class A: Mostly dry
Risk Class B: Mostly dry but sometimes wet
Risk Class C: Mostly wet
![Page 25: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/25.jpg)
Federal Regulations
Occupational Safety and Health Administration (OSHA)
Americans with Disabilities Act (ADA)
rely upon and reference ANSI and ASTM standards
![Page 26: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/26.jpg)
OSHA Regulations
Department of labor CFR 1910.22 describes keeping floors “clean, orderly and in a sanitary condition”
Currently does not require that walkways met any specific COF value
Currently does not specify any test method, standard, or test instrument
Proposed new rule calls for walkways to be inspected by a “qualified person”
OSHA seeking to incorporate language consistent with ANSI standards
![Page 27: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/27.jpg)
ADA
ADA (ADAAG) appendix required that walkways maintain a COF of 0.6 and 0.8 for ramps but did not specify the test method, standard, testing instrument, or condition (wet vs. dry)
Incorrectly referenced OSHA as having a 0.5 COF requirement which was withdrawn via a bulletin announcement in 2005
![Page 28: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/28.jpg)
Building Codes
International Code Council (ICC) “The Building Code”, Does not specify COF values but does reference ANSI A137.1-2008 which specifies ASTM C1028 (withdrawn) testing of uninstalled ceramic tile, however, it has no slip resistance standards.
Some local codes call for walkways to be slip resistant, however, they do not specify how to test (i.e. Los Angles, California).
![Page 29: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/29.jpg)
Look For The NFSI Label
![Page 30: ANSI NFSI B101.0 Walkway Auditing StandardANSI/NFSI B101.1-2009 ANSI/NFSI B101.3-2012 Applies to ALL hard surface walkway surfaces (first ever uniform test method) Can be used in](https://reader034.fdocuments.net/reader034/viewer/2022042908/5f38753c5800ec081178e5e8/html5/thumbnails/30.jpg)
How Standards Compliance Testing Benefits Your Company
1. Creates An Evidentiary Trail of Due Diligence and Reasonable Care
2. Establishes the creation and use of a well organized floor safety program which may prevent slip and fall accidents.
3. Provides a definite and responsible evidentiary trail which will defend against claims of improper installation and irresponsibility.