A NNEXURE -V

Compliance for Specifications of CCTV Surveillance System at Bhopal

SECTION: A

1) (A) Outdoor Heavy duty, Pan/Tilt, Day and Night vision camera with External IR Illuminators & IP connectivity (with accessories):

S/No. Attributes Specifications details Compliance(Yes/No)

Remarks (in case of deviation)

1 Size and type of sensor

1/3” or better, Progressive Scan CCD /CMOS (with IR cut filter)

2 Optical Zoom 20 x (HD) or greater3 Digital Zoom 10 X or better4 Resolution 1920 X 1080 pixels5 Focus Automatic6 Minimum

IlluminationColour 0.5lux (1/25 sec), BW 0.1 lux(1/25 sec) with 30 IRE

7 Pan & Tilt 360 deg Pan and 180 degree or better tilt8 Preset Speed Min 300 deg per sec or better for pan9 Day / Night

FunctionsDay / Night, Automatic switch over from Colour to B/W

10 Network Interface

10/100 baseTX, RJ 45

11 Mechanical IR cut filter

Yes

12 Preset Atleast 100 preset positions minimum with control queue and on screen directional indicator

13 Video Compression

M-JPEG and H.264 ( or better)

14 Video streaming Multi-stream with variable/ configurable frame rate / bit rate for preview and recording H.264 & MJPEG Video

15 Image Settings Wide dynamic range (WDR), white Balance, backlight compensation, at least 4 privacy mask zone.

16 Supported protocols

IPv4/v6, HTTP, FTP, SMTP, UPnP, SNMP, RTP,TCP, UDP, IGMP, ICMP, DHCP, HTTPS

17 Users 5 or more simultaneous Users/Unlimited users in multicast mode

18 Power 240 V AC, suitable power adapter to be provided for conversion from 230V AC +/- 5%, 50 Hz supply.

19 Mount Facility of Pole Mount should be available and all accessories for its support to be provided.

20 Casing IP66 or above- rated casing + Nema 4X with

| P a g e1

sunshield OR IK-10 rated Vandal proof housing.

21 Certifications UL/CE, FCC,EN22 Operating

Temperature0°C to +50°C or better

23 Compatible standard and Protocol

ONVIF Profile S Support

1) (B) External IR Illuminator for outdoor CCTV camera ( Qty:6)

S.No Attributes Specification Details Compliance(Yes/No)

Remarks (in case of deviation)

1 Illuminator External IR Illuminator, Seamless full scene illumination

2 Wavelength 850 nm3 Distance coverage 100 m or better4 Optics SMT LED5 Angle 180 deg coverage6 Casing Vandal Resistant, IP667 Power 100-240VAC or with suitable power

adapters8 Operating Temperature 0 to +50 deg C or better9 Mounting Wall/Pole Mounting bracket to be

provided

2) IP based Indoor PTZ dome camera with mounting accessories :

S.No. Attributes Specification details Compliance(Yes/No)

Remarks (in case of deviation)

1 Image sensor Min 1/3 " or better , CCD / CMOS/MOS

2 Optical & Digital Zoom 20 X or better Optical Zoom and 12 X or better digital zoom

3 Resolution 1920 X 1080 pixels4 Focus Auto5 Pan 360 degrees endless6 Tilt Min 180 degrees

7 Preset Pan/Tilt Speed Pan :200 deg /sec or better Tilt: 90 deg/sec or better

8 Min illumination Camera should provide usable high resolution in extreme low light level

9 Day/Night function Day / Night automatic changeover from colour to black & white

10 Network Interface 10/100-BaseTX, RJ-45

| P a g e2

11 IR Cut Filter Yes12 Preset Atleast 100 preset position or better13 Video Compression H.264 or better14 Video Streaming Multi stream with variable or

configurable frame rate & bit rate for H.264 video

15 Intelligence Video Motion detection16 Image settings Wide Dynamic Range

White balanceBacklight CompensationPrivacy Mask

17 Security Password Protection18 Supported Protocol IPv4/v6, HTTP, QoS, FTP, SMTP,

UpnP, SNMP, TCP, UDP ,ICMP, DHCP, HTTPS

19 Power 240 Volts AC, suitable power adapter to be provided for conversion from 230V AC +/- 5%, 50 Hz supply. Must support PoE.

20 Casing IP 66 or better rating + NEMA 4X with sunshield OR IK-10 rated metal vandal proof housing

21 Mount Facility of Ceiling / Wall mount should be available and all accessories for its support to be provided.

22 Certifications UL/CE, FCC, EN23 Compatible standard ONVIF Compliant24 Operating Temperature 0 degrees to +50 degrees or better

3) IP based Fixed Indoor dome camera with mounting accessories:

S/No. Attributes Specification details Compliance(Yes/No)

Remarks (in case of deviation)

1 Image Sensor Minimum 1/3” Progressive Scan CCD/CMOS/MOS with Day/Night Function (IR corrected)

2 Resolution 1920x1080 pixels3 Frame rate H.264 / Up to 25 fps selectable4 Focus Varifocal with remote focus and

zoom5 Minimum Illumination Camera should provide usable high

resolution video in extremely low light level

6 Day / Night Functions Day / Night, Automatic switch over from Colour to B/W at 0.1 lux

7 Network Interface 10/100 base TX ,RJ- 45

| P a g e3

8 Video Compression H.264 and M-JPEG9 Video streaming Multi-stream with variable/

configurable frame rate / bit rate for preview and recording H.264 /MJPEG Video

10 Alarm inputs/ outputs Minimum one configurable input and output.

11 Intelligence Motion detection, Audio detection12 Image settings Wide dynamic range (WDR), colour,

brightness, sharpness, white balance, exposure control

13 Security Password protection14 Supported protocols IPv4/v6, HTTP, FTP, SMTP, UPnP,

SNMP, RTP,TCP, UDP, IGMP, ICMP, DHCP, HTTPS

15 Users 5 or more simultaneous Users/Unlimited users in multicast mode.

16 Power Must support PoE along with standard power supply with suitable power adapter

17 Casing IP66 rating + IK 10 rated Vandal resistant or Nema 4x-rated casing

18 Certifications UL/CE, FCC, EN19 Operating Temperature 0 Degrees to + 50 degrees or better.20 Compatible standard and

ProtocolONVIF profile S support

21 Local storage SD/SDHC/SDXC, support to be available upto 32 GB. 32 GB memory card to be provided with each camera.

22 Mount Facility of Ceiling / Wall mount should be available and all accessories for its support to be provided.

4) Video Management Software for recording, management & operation supporting up to 36 cameras or more with license for server & clients:

Features

S/No Specification details Compliance(Yes/No)

Remarks (in case of deviation)

1 The surveillance system should provide a highly scalable and reliable platform to enable customized, network-based surveillance applications

2 Capable of handling multi-vendor products and open standard .The system should support seamless integration of all ONVIF compliant cameras

| P a g e4

3 Permanent license to handle/manage/add multiple cameras based on scalability.

4 Video compression: H.264 (MPEG-4 Part 10/AVC) or better5 The system should support digital pan-tilt-zoom on live or

archived video6 The surveillance viewing system should be in thick client for

local viewing and thin client through http browser for remote viewing single or multiple live and archive cameras and control PTZ camera.

7 The system should be able to trace the end to end video traffic and should be able to pinpoint the problematic nodes on the network that will affect the quality of video being streamed from the camera to servers

8 The Video display should be intelligent that can automatically change view based on the event such as motion started/stopped, video analytic, camera digital input contact closed/opened

9 Optional feature: The system should support the Redundancy / Fail-over feature. In case of failure of NVR/Camera server the relevant cameras should automatically switch over to the redundant NVR/Camera Server

10 The system should have a centralized server that will be installed at Central Control Room for all configuration and access management. The system should have the capability and facility of distributed architecture in the future.

11 The area under surveillance should be monitored and controlled through workstations and Video display Monitors

12 The system must provide a built-in facility capable of embedding digital signature for irreversibly embedding information to the video to ensure tamper-proof recording.

13 The system software should support flexible 1/2/4/16 Windows split screen display mode or scroll mode on the PC monitor or on Video preview monitor as per site requirement.

14 Storage and bandwidth calculation should be provided along with bid.

15 It should support protocols such as IPv4/v6, HTTP, QoS, FTP, SMTP, UpnP, SNMP, TCP, UDP ,ICMP, DHCP, HTTPS.

1. Preview:S/No Specification details Compliance

(Yes/No)Remarks (in case of deviation)

1 Support for different frame rate on preview and recording.2 Live view of minimum 16 cameras or better simultaneously,

User definable split without jitter3 Web client for remote viewing, playback & search4 Create snapshot images on-the-fly and as an event index for

search later on5 Zoom in/out on live view and playback Audio6 Full duplex real time audio support and mute function

| P a g e5

7 Control of PTZ cameras and preset positions using mouse & joystick

8 Display map with all camera health status9 Device states shown by icons, including network connection

loss, video loss, Image Enhancement Feature, motion detector, etc.

2. Search:S/No Specification details Compliance

(Yes/No)Remarks (in case of deviation)

1 Should search video clips in servers, storage systems with date, time, Channel,etc

2 To display snapshots in thumbnail view; user should browse the snapshots then Click to start playback video clip at that time stamp

3. Playback:S/No Specification details Compliance

(Yes/No)Remarks (in case of deviation)

1 Should play back recorded video/audio from servers, Storage unit & media library Play, Pause, Stop Fast Forward, Fast rewind, etc

2 To export a period of video clips into various formats3 The system should support the user map capability in formats

such as JPEG, GIF, PNG, BMP, TIFF. etc

4. Recording:S/No Specification details Compliance

(Yes/No)Remarks (in case of deviation)

1 Simultaneous digital multi-channel video/audio unlimited recording on servers, Storage unit

2 The system should provide the facility of viewing, recording and replay simultaneously and should be capable of frame by frame analysis.

3 The offered system should have the facility to export the desired portion of clipping on CD/ DVD

4 To record video with user-defined schedule and time period. Recording can be scheduled per camera with required frame rate and quality settings

5 Recordings can be moved daily to remote storage ( NAS)6 Tamper proof recording with password protection

5) 16 channel NVR (Network Video Recorder):

S/No. Attributes Specification details Compliance(Yes/No)

Remarks (in case of deviation)

1 System Type Standalone Box Type NVR or PC based NVR system with all the

| P a g e6

required softwares.Compression H.264 or better

2 Video IP Camera Input

16 channels @ D1(704 x 480) Resolution

IP camera Support

Must Support Multi-Brand IP cameras

Industry Standard

Compliance to ONVIF

 Video Interface

1 HDMI, 1 VGA

3 Audio Input & Output

Yes

4 Display Multi-Screen Display

Multi Screen Display Option to be provided & Selectable

Display Resolution

VGA ( 1024 x 768 / 1280 x 1024), HDMI ( 720p / 1080p)

Display In English On Screen5 Recording Recording

ResolutionAt D1 (704 x 480) and other higher and lower resolution should be selectable as per camera inputs

Recording Speed

Upto to 240 FPS @ D1(704 x 480) and other than this should be selectable

Recording Quality

Must be selectable

Recording Mode

Must have different recording modes like Manual, Continuous , Motion Detection , Camera Blank etc.

6 Playback Playback Channel

All 16 Channel simultaneously Playback @ D1(704 x 480) resolution

Playback Mode

Play, Pause, Stop, Rewind, Fast Play, Slow Play etc

Search Mode Time / Date, Alarm, Motion Detection

7 Network Network Function

Must support standard network protocol like HTTP, TCP/IP etc

Remote Users Minimum 4 Users simultaneously login

Security Multiple user access levels with password

Remote Access

Internet Explorer on windows 8.1 operating system (OS) or higher

Remote Operation

Monitor, Playback, System Setting, File Download etc and

| P a g e7

PTZ control if applicable8 Storage HardDisk Should be supplied with 3 TB

capacity of Internal/ External Hard Disk

External Backup

Provision for CD-DVD, Flash Drive, USB Hard disk, Network Download

9 Interface Ethernet RJ-45 Port ( 10/100/1000-Base T)

USB Interface

Min 2 ports

Keyboard & Mouse

Suitable provision must be provided

10 Preferably the system to be supplied with IR remote control (if hardware based)

11 Power Supply AC 100 ~ 240 V , 50 Hz12 Operating Temperature 0 Deg to 50 Deg C

6) Full HD 55” LED Display with HDMI interface:

S.No Attributes Specification Details Compliance(Yes/No)

Remarks (in case of deviation)

1 Feature 200 Hz, Smart energy saver, Backlight control

2 Display Technology

Backlight LED Scanning: Progressive

3 Picture Control TV System: PAL Aspect Ratio: 16:9 or 4: 3 selectable Resolution 1920(H) X 1080(V) or above

4 Brightness 450 cd/m2

5 Response time 8 millisecond or better6 Display Screen Aspect Ratio (16:9/4:3) : Selectable

'Viewing Angle (H/V) : 178/1787 Sound Control Volume Leveler (AVL) : Auto, 'Sound

Output: 10W x 2 with built in speaker, 'Line output : Stereo (AV Stereo)/Mono

8 Screen Size 55”9 Connector Input Rear : AV, component PC analogy (15

pin), HDMI ( Ver 1.3), Input Side : Composite AV, USB 2.0

10 Remote Full function Remote Controller

11 Accessories Wall Mounting kit, cables and Indian standard power cord

12 HDMI cable Interfaces

5 m length, HDMI, 3G/HD/SD-SDI

13 Power Supply 230V-240 V AC, 50 Hz

| P a g e8

14 The Display Systems should be operational on a 24 x 7 basis and are proposed to be kept inside controlled environment

7) 32” LED TV:S.No Attributes Specification Details Compliance

(Yes/No)Remarks (in case of deviation)

1 Display 32” Full HD Flat Screen LED TV (1920WX 1080H)

2 Aspect ratio 16:93 Interface HDMI, USB4 Sound Output 2 X10 W, 2 built in speakers.5 Power Rating 100-240 V AC, 50/60 Hz.6 Accessories System to be provided with all standard

accessories for pedestal mount and wall mount + standard IR remote control with batteries

SECTION: B

8) Server with 24” LED Monitor:

S/No Attributes Specifications detailsCompliance(Yes/No)

Remarks (in case of deviation)

1 Form factor chassis1U or 2U Rack mountable with Mounting Rails

2

Processor

Intel Xeon processor E5 2600 v4 product family , 4 core or better , 10 MB L3 cache or better , 3.5 GHz or better

3 OSMicrosoft Windows Server 2012 R2 or latest

4 Memory 32 GB DDR4 or better.

5 HDD6 x 1 TB or better, Hot Pluggable , SAS or SATA , 7200 RPM or better

6 Storage Storage controller supporting RAID 1 and RAID 5.

7 Network Controller 4 x 1Gb, 2 x 10Gb or more ports8 Monitor 24 Inch LED monitor9 Keyboard USB Keyboard10 Mouse USB , Optical Scroll Mouse11 Bus Slots PCI-Express and PCIe 3.0 slots 12 Graphics Graphics controller 2 GB or better

13 Power Supply2 * Hotplug Power supply (230 V @ 50 Hz) unit

14Warranty 3 years

15 Note Catalog/data sheet to be provided

| P a g e9

along with quotation, Make and Model to be mentioned by vendor.

16Note

During Warranty period the faulty Hard disk will not be returned to the vendor after replacement.

9) Client workstation with High end Graphics with 24” LED monitor:

S/No Attributes Specification DetailsCompliance(Yes/No)

Remarks (in case of deviation)

1 Chassis Tower / Mini Tower

2 Processor Intel Xeon processor , Quad core , 3 Ghz or better.

3 Interface ports USB 3.0 (min 2 Nos), USB 2.0 (min 4 Nos)

4 Audio Onboard support5 Memory (RAM) 8GB DDR4 or better

6 Hard disc 1 TB HDD (7200 RPM) ( SATA) or better .

7 Graphics Card One PCI Express HD Graphics card8 Optical Drive DVD RW

9 Ethernet Gigabit Ethernet Port. (10/100/1000 Mbps)

10   

Monitor    

24 inch Diagonal ,Anti GlareAspect Ratio - 16:9VGA and DVI interface.Resolution : 1920x1080x60Hz or better

11 Keyboard Full Height , Windows Keyboard.(USB)12 Mouse USB optical mouse13 Power supply 230Votls AC, 50Hz

14 Software Windows 10 Professional -Pre-Installed with license.

15 Warranty 3 Years

16 NoteCatalog/data sheet to be provided along with quotation, Make and Model to be mentioned by vendor.

17Note

During Warranty period the faulty Hard disk will not be returned to the vendor after replacement.

SECTION: C

10) Network switch Layer 3:

S/No Attributes Specification Details Compliance Remarks

| P a g e10

(Yes/No) (in case of deviation)

1 No of Ports 24 1G Combo ports and 4 10G SFP+ ports, 2QSFP+ equipped with internal redundant power supplies, 4 10G SFP+ ports should also support 1G SFP based on network requirement.

2 System Capacity Should support active-active clustering technology for higher availability of Layer 2 and Layer 3 (RIP, OSPF, BGP, PIM) including video applications for hitless failover with active-active clustering bandwidth of 80Gbps per switch with no single point of failure. Vendors should offer required cables/modules from day-1

3 Switching Fabric Speed

High back plane speed minimum 280 Gbps or more, forwarding rate – 214.3 Mpps 9K Jumbo frames

4 Power Characteristics

AC Voltage: 100 to 240V (+/-10% auto ranging). Redundant and hot-swappable power supplies

5 VLAN, L2 Features and Layer 3 features

Should support Static routing, RIP, RIPng, OSPF, OSPFv3, BGP4, BPG4+, PIM v4 SM, DM and SSM, IEEE 802.3az

6 Security ACL, DHCP( server, relay, client), DAI, Private VLAN, Authentication( MAC, Web and IEEE 802.3x), LLDP-MED, SSLv2 and SSLv3, TACACS+, IP source guard

7 Management CLI, GUI, USB interface for taking backup of software release files configurations, , cable fault detector, sflow, DHCPv6, DNSv6, IPv4 and IPv6 dual stack, SNMPv6, Telnetv6 and SSHv6, IEEE802.3az, RMON 4 groups, SNMPv3,

8 Authentication Strong password security and encryption

Tri-authentication: MAC-based, web-based and IEEE 802.1x

MD5 Message-Digest algorithm

IP authentication using keyed MD5

9 Standards and Protocols that support the following services

Built-In Self Test (BIST), Port mirroring, Cable fault locator (TDR) , UniDirectional Link Detection (UDLD) ,Hardware health monitoring ,Automatic link flap detection and port shutdown ,Ping polling and TraceRoute for IPv4 and IPv6

| P a g e11

10 Others For ease of integration, all switches should be of same OEM

11) Single Mode SFP Modules ( transceiver):

S/No. Attributes Specification details Compliance(Yes/No)

Remarks (in case of deviation)

1 Connector types LC2 Standards supported 802.3z, SFP MSA3 Connections supported 1000Base-LX4 Fiber Type SMF5 Wavelength 1310 nm6 Optical Power Output -9.5 to -3 dBm7 Receiver Sensitivity -20 dBm8 Transmission Distance ~10 km9 Operating Temperature 0 ºC to 50 ºC10 Max. Data Rate 1.25 Gbps11 All modules should be of same OEM as that of switch.

12) Network layer 2 PoE Switch:

S/No. Attributes Specification details Compliance(Yes/No)

Remarks (in case of deviation)

1 Port Density Min 16 x 10/100/1000 Base-T PoE+ ports and additional 2 100/1000X SFP PORTSShould support PoE+ as per IEEE 802.3at with PoE budget of 245W or more 1 Ports should be populated with SMF 1Gbps SFP(10km) of same OEM

2 L2 Features Should support STP, RSTP, MSTP, IGMP v1/v2/v3 snooping, STP root guard, Voice VLAN, MLD snooping (MLDv1 and v2), IEEE 802.3ac VLAN tagging

3 Security Should support ACL- L2/L3, DHCP snooping, IP Source guard, DAI, Private VLAN, Authentication( MAC, Web and IEEE 802.3x), sflow, , TACACS+,LAG and port mirroring , Loop protection and loopdetection, Dynamic VLAN assignment

4 Management CLI, GUI, Digital optical monitoring, fault detection in copper cables,DHCPv6, DNSv6, Telnetv6 and SSHv6, NTPv6, IEEE802.3az, RMON 4 groups, SNMPv3,LLDP-MED, IEEE 802.3az, USB interface for taking

| P a g e12

backup of software release files configurations, SSLv2 and SSLv3, Single IP management of at least 20 switches or more

5 Local Indication

Status LEDs for Power, Fault, link activity etc

6 Power Supply AC Input: 230V +/- 10% V AC, 50-60 Hz7 Operating

Temperature0 ~ 50°C or better

8 Relative Humidity

10 ~ 90% non-condensing

9 Product Safety

UL/cUL listed, Compliance to CE/FCC/IEC standards

SECTION: D

13) Single Mode Optical Fiber Cable (12 core)

S/No Attributes Specification details Compliance(Yes/No)

Remarks (in case of deviation)

1 Fibre Type 12 core Single Mode, 9/125 micron primary coated buffers

2 Armour Corrugated Steel Tape Armour Outer Sheath (HDPE) Water Blocking Gel.

14) (a) CAT-6 UTP Cable for Indoor camerasS/No Attributes Specification details Compliance

(Yes/No)Remarks (in case of deviation)

1 Type ANSI/TIA-568-C.2 Category 6A Cable2 Support Gigabit Ethernet (1000 Base T) standard, operate

at bandwidth of 500 MHz3 Conductor 23 AWG Solid bare copper4 Insulation High density polyethylene5 Type 4 Pair unshielded twisted pair cable6 Sheath PVC/LSZH

14 (b) CAT-6 STP cable for Outdoor CameraS/No Attributes Specification details Compliance

(Yes/No)Remarks (in case of deviation)

1 Type Compatible with TIA/EIA-568 standard2 Support Gigabit Ethernet (1000 Base T) standard, operate

at bandwidth of 250 or 500 MHz3 Conductor 23 AWG Solid bare copper4 Insulation High density polyethylene5 Type 4 Pair shielded twisted pair cable6 Sheath PVC/LSZH

15) HDPE Pipe:

| P a g e13

S/No. Attributes Specification details Compliance(Yes/No)

Remarks (in case of deviation)

1 Material grade and pressure rating PE-63 and PN-6 respectively

2 Outer diameter 32 mm

3 Inner diameter 26-27.4 mm

4 Wall thickness 2.3-3 mm

5 Mark ISI standard

6 Smallest piece length should not be less than 500 mtrs

16) Media Converter:

S/No. Attributes Specification details Compliance(Yes/No)

Remarks (in case of deviation)

1 Copper Port Gigabit2 Fiber port One fiber slot with Single mode LC

Connectors3 Fiber Media SM 1300nm 9/125um Fiber Cable4 Operating Distance Gigabit fiber GBIC and SFP for

distance of 10 Kms or better5 TP Ports Shielded RJ 45 Jack6 Power 9V, 1A Adapter7 Electrical/Mechanical

ApprovalsSafety Conforms to all standards normally including safety standards EN, UL compliant

8 Standalone, wall or rack Mountable into the chassis.

17) Conduits for UTP cable:S/No Attributes Specification details Compliance

(Yes/No)Remarks (in case of deviation)

1 Make and standard PVC, ISI Mark2 Diameter 25 mm

18) 12 Port rack mount LIU:S/No Attributes Specification details Compliance

(Yes/No)Remarks (in case of deviation)

1 Type Standard 19” Rack Mount (Mount Hardware included), 1U/2U Supplied with all Mounting Fixings including Cable Management

2 Splice trays Minimum 23 ROHS compliant Yes

| P a g e14

19) Poles for mounting of outdoor cameras:

S/No Attributes Specification Details Compliance(Yes/No)

Remarks (in case of deviation)

1 Material Aluminum / MS/ Glass Reinforced Plastic coated GI

2 Wind loads for design Capable to withstand wind loads as per IS 875

3 Metal protection treatment HOT DIP Galvanized confirming BSEN ISO 1461 and two or more layers of epoxy coating Accessibility option for installation and maintenance of cameras Protective measures from lightning

4 Dimensions 6 mtr height, 150 mm diameter, Thickness 8 mm or better.

20) Wall mount rack for enclosure 6U size:

S/No Specification details Compliance(Yes/No)

Remarks (in case of deviation)

1 Depth: Atleast 400 mm2 Adjustable 19” equipment mounting verticals in front and rear,

compatible with 19” international standard3 Depth adjustable mounting slots4 Top and bottom panel with ventilation & cable entry facility 5 Rack standard: Conforms to DIN 41494 or equivalent ISO

standard6 Construction : welded7 Front Door: Lockable toughened glass door8 Basic frame: steel9 Standard Finish: powder coated10 Colour: Black or grey11 Easy wall mount provision12 Provision to mount 1 cooling fan on the top panel 13 Accessories: Power distribution unit: 01 no of 6 sockets of 5 A

each14 Sufficient no of screws and nuts and 2 no of keys to be provided

21) Wall mount rack for enclosure 15 U size:

S/No Specification details Compliance(Yes/No)

Remarks (in case of deviation)

1 Depth: Atleast 500 mm

| P a g e15

2 Adjustable 19” equipment mounting verticals in front and rear, compatible with 19” international standard

3 Depth adjustable mounting slots4 Top and bottom panel with ventilation & cable entry facility 5 Rack standard: Conforms to DIN 41494 or equivalent ISO

standard6 Construction : welded7 Front Door: Lockable toughened glass door8 Basic frame: steel9 Standard Finish: powder coated10 Colour: Black or grey11 Easy wall mount provision12 Provision to mount 2 cooling fan on the top panel 13 Accessories:

Power distribution unit: 02 no of 6 sockets of 5 A each2 no of fans for cooling with fan tray and mounting accessories.

14 Sufficient no of screws and nuts and 2 no of keys to be provided

22) Floor Standing Rack for enclosure 27 U size:

S/No Specification details Compliance(Yes/No)

Remarks (in case of deviation)

1 Depth: Atleast 800 mm2 Adjustable 19” equipment mounting verticals in front and rear3 Depth adjustable mounting slots4 Standard mounting option: Castor wheels ( front 2 wheels with

brake and rear without brake) 5 Top and bottom panel with ventilation & cable entry facility 6 Rack standard: Conforms to DIN 41494 or equivalent ISO

standard7 Construction : welded8 Front Door: Lockable toughened glass door9 Basic frame: steel10 Standard Finish: powder coated11 Colour: Black or grey12 Provision to mount at least 4 cooling fan on the top panel 13 Accessories:

Power distribution unit: 02 no of 6 sockets of 5 A each 2 no of fans for cooling with fan tray & mounting accessories. Shelf with all accessories for mounting NAS and VMS server Key board shelf. Sufficient no of screws and nuts and 2 no of keys to be provided

SECTION: E

23) 2KVA UPS:

| P a g e16

S/No Attributes Specification Details Compliance(Yes/No)

Remarks (in case of deviation)

1 Rated Power 2 KVA2 Input Voltage 200 to 260 V AC, 50 Hz ,Single Phase3 Input Frequency 50 ± 2 Hz4 Output Voltage 220 V AC or 230 V AC, Single Phase5 Output Frequency 50 ± 0.5 Hz6 Regulation ± 1 %7 Battery Type Sealed Maintenance Free8 Backup Time 30 Minutes for Full Load (2 KVA @ 0.8 PF)9 Protection Mains Over/Under Voltage , DC Over/Under

Voltage , Inverter Over /Under Voltage, Inverter Overload, Overheat etc

10 Indications/ Metering

Suitable means for metering , indication on Normal and Alarm conditions

24) Rolling Chair and Computer Table

S/No. item Specifications Compliance(Yes/No)

Remarks (in case of deviation)

1 Rolling Chair Design should be suitable for operators comfort and use of space, and Comply with ISO11064 standard

2 Computer Table Design should be suitable for operators comfort and use of space, and Comply with ISO11064 standard

25) Screened Flexible Power cable (3C X 2.5 Sq.mm)

S/No. Specifications Compliance(Yes/No)

Remarks (in case of deviation)

1 1.1 KV grade

2 PVC Insulation and ISI marking

3 The Cable & Conductor shall conform to IS 694:1990 with latest amendments

4 Multi stranded, Punched electrolytic annealed bare Copper (ABC) conductor cables.

5 Annealed Tinned Copper (ATC) Screened/Braided Cable

| P a g e17

6 Cores laid up overall Malinex (or) Polyester Taped.

7 Overall FRLS PVC over sheathed.

8 Cable shall have meter’s marking indicating the length of the cable

9 Core Colour: Red, Black, Green

10 Bunched Conductor class 6

| P a g e18