Annex to Certificate No. - Sidenor · PDF file9 25 CrMo4 (1.7218) EN 10269 +QT BARS 25 100 AD...

Annex to Certificate No. 01 202 E/Q-02 6904 01

E-100-E- INES frase MM-Form8-BASAURI -Rev21 (4) (2).doc Rev. 21

Scope

according to Directive 2014/68/EU

Annex I §4.3 EN 764-4 AD 2000-

Merkblatt W0 FPC, Regulation (EU)

No. 305/2011(System 2+)

Manufacturer Work Nationality Date Page No.. TÜV-Name /Stamp

Company Name: SIDENOR ACEROS ESPECIALES, S.L. 1 TÜV Rheinland

PLANTA BASAURI E 28.03.17 Industrie Service

Location: E 48970 BASAURI Rev.: 5 of : 5 GmbH

Cur-

Materials-term Materials-No.

Material Specification

DeliveryCond.

Article Type of Product

Dimensions Cur-



* Thickness

*

mm fro

m from

1 2 3 4 5 6a 1 2 3 4 5 6a 1 1. Materials according to harmonized European standards (PED) and European Approval for Materials The use of the materials according to DGR 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved. The requirements and limits of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.

1 P 250 GH (1.0460) EN 10273 +N BARS 25 100 EN 10273

For materials with greater thickness than noted in the materialstandard , will apply a PMA for the mechanicial properitie

2

X 6CrNiMoTi 17-12-2 (1.4571), X 2CrNiMo 17-12-2 (1.4404) X 5CrNi 18-10 (1.4301) X5CrNiMo 17-12-2(1.4401) X2CrNi18-9(1.4307) X 8CrNiS 18-9(1.4305)

EN 10272 +AT BARS 25 100 EN 10272

3 25CrMo4 (1.7218) EN 10269 +QT BARS 25 100 EN 10269 4 34 CrNiMo 6 (1.6582), EN 10269 +QT BARS 25 100 EN 10269 5 40CrMoV4.6 (1.7711) EN 10269 +QT BARS 25 100 EN 10269 Erläuterung * +AT = solution treated +QT = quenched and tempered a = material +N = Normalized or normalizing formed +NT = normalized and tempered b = delivery condition +SR = stress relieved +S = soft annealed c = article +M = thermo mechanical treated d = dimensions in tech. regulations +AR = not treated e = weight f = No. of tech. regulation g = PMA fort he use in pressure equipment

in Directive 2014/68/EU neccessary



Scope


Annex I §4.3 EN 764-4 AD 2000-


No. 305/2011(System 2+)





Cur-


Material Specification DeliveryCond.


Dimensions Cur-



* Thickness * mm fro

m from

1 2 3 4 5 6a 1 2 3 4 5 6a 1 2. Materials according to the AD 2000-Code The use of the materials according to DGR 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved. The requirements and limits of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.

6

S 235J2 (1.0117), S-235 JR (1.0038), S 275 JR (1.0044), S 275J2 (1.0145), S 355 J2 (1.0577)

EN 10025.2 +N BARS 25 100 AD 2000 W13 For materials, which required a VdTÜV Werkstoffblatt additional, a suitability check and 3.2 certificate required.

7 P 250 GH (1.0577) EN 10273 +N BARS 25 100 AD 2000 W13

Outside the application limits specified for the materials, a require approval and PMA is required.

8

16 Mo 3 (1.5415), 13 CrMo 44 (1.7335), 10 CrMo 9-10 (1.7380), P 355 NH (1.0565)

DIN 17243 +QT BARS 25 100 AD 2000 W13

Erläuterung * +AT = solution treated +QT = quenched and tempered a = material +N = Normalized or normalizing formed +NT = normalized and tempered b = delivery condition +SR = stress relieved +S = soft annealed c = article +M = thermo mechanical treated d = dimensions in tech. regulations +AR = not treated e = weight f = No. of tech. regulation g = PMA fort he use in pressure equipment




Scope according to

Directive 2014/68/EU Annex I §4.3

EN 764-4 AD 2000-Merkblatt W0

FPC, Regulation (EU) No. 305/2011(System 2+)





Cur-



DeliveryCond.


Dimensions Cur-



* Thickness

*

mm fro

m from


9 25 CrMo4 (1.7218) EN 10269 +QT BARS 25 100 AD 2000 W 7For materials, which required a VdTÜV Werkstoffblatt additional, a suitability check and 3.2 certificate required.

10 21 CrMoV 5.7 (1.7709) EN 10269 +QT BARS 25 100 AD 2000 W 7 11 42 CrMo 4 (1.7225) EN 10269 +QT BARS 25 100 AD 2000 W 7






Scope according to







Location: E 48970 BASAURI Rev.: 5 of : 5 GmbH Cur

- Materials-term Materials-No.


DeliveryCond.


Dimensions Cur- Materials-term Materials-No.


* Thickness

*

mm fro

m from

1 2 3 4 5 6a 1 2 3 4 5 6a 1 3. Materials according to international standards ( e. g. ASTM, ASME, IBR etc. ) The use of the materials according to DGR 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved. The requirements and limits of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.

12 X 20 Cr 13 1.4021 DIN17440 +QT BARS 25 100 DIN17440

PMA is required Outside the application limits specified for the materials, a require approval is required.

13 24CrMo5 1.7258 DIN 17240 +QT BARS 25 100 DIN 17240 14 B7 ASTM A 193 +QT BARS 25 100 ASTM A 193 15 L7 ASTM A 320 +QT BARS 25 100 ASTM A 320 16 B16 ASTM A 193 +QT BARS 25 100 ASTM A 193

17

S 235J2 (1.0117), S-235 JR (1.0038), S 275 JR (1.0044), S 275J2 (1.0145), S 355 J2 (1.0577)

EN 10025-2 +N,+AR BARS 25 100 EN 10025-2





Scope


Annex I §4.3 EN 764-4 AD 2000-


No. 305/2011(System 2+)




Location: E 48970 BASAURI Rev.: 5 of : 5 GmbH Cur



DeliveryCond.




* Thickness

*

mm fro

m from


18 34 CrNiMo 6 (1.6582), 25 CrMo4 (1.7218), 42 CrMo 4 (1.7225)

EN 10083-3 +QT BARS 25 100 EN 10083-3 PMA is required Outside the application limits specified for the materials, a require approval is required.




E-100-E- INES frase MM-Form8-AZKOITIA -Rev21.doc Rev. 21

Scope according to






PLANTA AZKOITIA E 19.04.17 Industrie Service

Location: : E 20720 AZKOITIA (GUPUZKOA) Rev.: 5 of : 5 GmbH

Cur

-


Material Specification Delivery Cond.


Dimensions Cur-



* Thickness

*

mm

from

from

1 2 3 4 5 6a 1 2 3 4 5 6a 1

1. Materials according to harmonized European standards (PED) and European Approval for Materials

The use of the materials according to DGR 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval

or to the particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved.

The requirements and limits of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.

1 P 250 GH (1.0460) EN 10273 +N BARS 19 150 EN 10273

For materials with greater thickness than noted in the materialstandard , will apply a PMA for the mechanicial properities

2

X 6CrNiMoTi 17-12-2 (1.4571), X 2CrNiMo 17-12-2 (1.4404) X 5CrNi 18-10 (1.4301)

EN 10272 +AT BARS 19 200 EN 10272

3 25CrMo4 (1.7218) EN 10269 +QT BARS 19 150 EN 10269

4 34 CrNiMo 6 (1.6582), EN 10269 +QT BARS 19 100 EN 10269

5 40CrMoV4.6 (1.7711) EN 10269 +QT BARS 19 150 EN 10269

Erläuterung * +AT = solution treated +QT = quenched and tempered a = material +N = Normalized or normalizing formed +NT = normalized and tempered b = delivery condition +SR = stress relieved +S = soft annealed c = article +M = thermo mechanical treated d = dimensions in tech. regulations +AR = not treated e = weight f = No. of tech. regulation g = PMA fort he use in pressure equipment in

Directive 2014/68/EU neccessary



Scope according to





Company Name: SIDENOR ACEROS ESPECIALES, S.L.. 2 TÜV Rheinland



Cur

-


Material Specification Delivery Cond.


Dimensions Cur-



* Thickness * mm

from

from

1 2 3 4 5 6a 1 2 3 4 5 6a 1

2. Materials according to the AD 2000-Code

The use of the materials according to DGR 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material

approval or to the particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is

proved. The requirements and limits of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.

6

S 235J2 (1.0117), S-235 JR (1.0038), S 275 JR (1.0044), S 275J2 (1.0145), S 355 J2 (1.0577)

EN 10025.2 +N BARS 19 150 AD 2000 W13 For materials, which required a VdTÜV Werkstoffblatt additional, a suitability check and 3.2 certificate required. Outside the application limits specified for the materials, a require approval and PMA is required.

7 P 250 GH (1.0577) EN 10273 +N BARS 19 150 AD 2000 W13

8

16 Mo 3 (1.5415), 13 CrMo 44 (1.7335), 10 CrMo 9-10 (1.7380), P 355 NH (1.0565)

DIN 17243 +QT BARS 19 200 AD 2000 W13

Erläuterung * +AT = solution treated +QT = quenched and tempered a = material +N = Normalized or normalizing formed +NT = normalized and tempered b = delivery condition +SR = stress relieved +S = soft annealed c = article +M = thermo mechanical treated d = dimensions in tech. regulations +AR = not treated e = weight f = No. of tech. regulation g = PMA fort he use in pressure equipment in

Directive 2014/68/EU neccessary



Scope according to








Cur

-



Delivery Cond.


Dimensions Cur-



* Thickness

*

mm

from

from

1 2 3 4 5 6a 1 2 3 4 5 6a 1

2. Materials according to the AD 2000-Code


approval or to the particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME)

is proved. The requirements and limits of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.

9 25 CrMo4 (1.7218) EN 10269 +QT BARS 19 150 AD 2000 W 7

For materials, which required a VdTÜV Werkstoffblatt additional, a suitability check and 3.2 certificate required. Outside the application limits specified for the materials, a require approval and PMA is required.

10 21 CrMoV 5.7 (1.7709) EN 10269 +QT BARS 19 160 AD 2000 W 7

11 42 CrMo 4 (1.7225) EN 10269 +QT BARS 19 60 AD 2000 W 7





Scope according to








Cur-



Delivery Cond.




* Thickness

*

mm

from

from

1 2 3 4 5 6a 1 2 3 4 5 6a 1

3. Materials according to international standards ( e. g. ASTM, ASME, IBR etc. )






13 24CrMo5 1.7258 DIN 17240 +QT BARS 19 160 DIN 17240

14 B7 ASTM A 193 +QT BARS 19 178 ASTM A 193

15 L7 ASTM A 320 +QT BARS 19 100 ASTM A 320

16 B16 ASTM A 193 +QT BARS 19 200 ASTM A 193

17

S 235J2 (1.0117), S-235 JR (1.0038), S 275 JR (1.0044), S 275J2 (1.0145), S 355 J2 (1.0577)

EN 10025-2 +N, +AR BARS 19 200 EN 10025-2

Erläuterung * +AT = solution treated +QT = quenched and tempered a = material +N = Normalized or normalizing formed +NT = normalized and tempered b = delivery condition +SR = stress relieved +S = soft annealed c = article +M = thermo mechanical treated d = dimensions in tech. regulations +AR = not treated e = weight f = No. of tech. regulation g = PMA for the use in pressure equipment




Scope according to








Cur-



Delivery Cond.




* Thickness

*

mm

from

from

1 2 3 4 5 6a 1 2 3 4 5 6a 1

3. Materials according to international standards ( e. g. ASTM, ASME, IBR etc. )




18

34 CrNiMo 6 (1.6582), 25 CrMo4 (1.7218), 42 CrMo 4 (1.7225)

EN 10083-3 +QT BARS 19 200 EN 10083-3





E-100-E- INES frase MM-Form8-REINOSA -Rev21 (2) (2).doc Rev. 21

Scope


Annex I §4.3 EN 764-4 AD 2000-


No. 305/2011(System 2+)



PLANTA REINOSA E 05.05.16 Industrie Service

LocationE 39200 REINOSA (CANTABRIA) Rev.: 4 of : 5 GmbH

Cur-



DeliveryCond.


Dimensions Cur-



* Thickness

*

mm fro

m from


1 P 250 GH (1.0460) EN 10273 N BARS 100 150 EN 10273


2

X 6CrNiMoTi 17-12-2 (1.4571), X 2CrNiMo 17-12-2 (1.4404) X 5CrNi 18-10 (1.4301) X5CrNiMo 17-12-2(1.4401) X2CrNi18-9(1.4307) X 8CrNiS 18-9(1.4305)

EN 10272 AT BARS 100 250 EN 10272

3 25CrMo4 (1.7218) EN 10269 QT BARS 100 150 EN 10269 4 34 CrNiMo 6 (1.6582), EN 10269 QT BARS 100 100 EN 10269 5 40CrMoV4.6 (1.7711) EN 10269 QT BARS 100 150 EN 10269 Erläuterung * +AT = solution treated +QT = quenched and tempered a = material +N = Normalized or normalizing formed +NT = normalized and tempered b = delivery condition +SR = stress relieved +S = soft annealed c = article +M = thermo mechanical treated d = dimensions in tech. regulations +AR = not treated e = weight f = No. of tech. regulation g = PMA fort he use in pressure equipment




Scope


Annex I §4.3 EN 764-4 AD 2000-


No. 305/2011(System 2+)





Cur-




Dimensions Cur-




m from


6

S 235J2 (1.0117), S-235 JR (1.0038), S 275 JR (1.0044), S 275J2 (1.0145), S 355 J2 (1.0577)

EN 10025.2 N BARS 100 150 AD 2000 W13 For materials, which required a VdTÜV Werkstoffblatt additional, a suitability check and 3.2 certificate required.

7 P 250 GH (1.0577) EN 10273 N BARS 100 150 AD 2000 W13

8

16 Mo 3 (1.5415), 13 CrMo 44 (1.7335), 10 CrMo 9-10 (1.7380), P 355 NH (1.0565)

DIN 17243 QT BARS 100 200 AD 2000 W13 Outside the application limits specified for the materials, a require approval and PMA is required.





Scope according to








Cur-



DeliveryCond.


Dimensions Cur-



* Thickness

*

mm fro

m from


9 25 CrMo4 (1.7218) EN 10269 QT BARS 100 150 AD 2000 W 7For materials, which required a VdTÜV Werkstoffblatt additional, a suitability check and 3.2 certificate required.

10 21 CrMoV 5.7 (1.7709) EN 10269 QT BARS 100 160 AD 2000 W 7






Scope according to







LocationE 39200 REINOSA (CANTABRIA) Rev.: 4 of : 5 GmbH Cur



DeliveryCond.




* Thickness

*

mm fro

m from




12 24CrMo5 1.7258 DIN 17240 +QT BARS 100 160 DIN 17240 13 B7 ASTM A 193 +QT BARS 100 178 ASTM A 193 14 L7 ASTM A 320 +QT BARS 100 100 ASTM A 320 15 B16 ASTM A 193 +QT BARS 100 200 ASTM A 193

16

S 235J2 (1.0117), S-235 JR (1.0038), S 275 JR (1.0044), S 275J2 (1.0145), S 355 J2 (1.0577)

EN 10025-2 +N,+ AR BARS 100 200 EN 10025-2





Scope


Annex I §4.3 EN 764-4 AD 2000-


No. 305/2011(System 2+)




LocationE 39200 REINOSA (CANTABRIA) Rev.: 4 of : 5 GmbH Cur



DeliveryCond.




* Thickness

*

mm fro

m from


17 34 CrNiMo 6 (1.6582), 25 CrMo4 (1.7218), 42 CrMo 4 (1.7225)

EN 10083-3 QT BARS 100 200 EN 10083-3 PMA is required Outside the application limits specified for the materials, a require approval is required.




E-100-E- INES frase MM-Form8-VITORIA -Rev21 (2) (2).doc Rev. 21

Scope


Annex I §4.3 EN 764-4 AD 2000-


No. 305/2011(System 2+)



PLANTA VITORIA E 30.03.17 Industrie Service

Location: E 01013 VITORIA (ARABA) Rev.: 5 of : 5 GmbH

Cur-




Dimensions Cur-



* Thickness

*

mm fro

m from


1 P 250 GH (1.0460) EN 10273 +N BARS --- 26 EN 10273


2

X 6CrNiMoTi 17-12-2 (1.4571), X 2CrNiMo 17-12-2 (1.4404) X 5CrNi 18-10 (1.4301)

EN 10272 +AT BARS --- 26 EN 10272

3 25CrMo4 (1.7218) EN 10269 +QT BARS --- 26 EN 10269 4 34 CrNiMo 6 (1.6582), EN 10269 +QT BARS --- 26 EN 10269 5 40CrMoV4.6 (1.7711) EN 10269 +QT BARS --- 26 EN 10269 Erläuterung * +AT = solution treated +QT = quenched and tempered a = material +N = Normalized or normalizing formed +NT = normalized and tempered b = delivery condition +SR = stress relieved +S = soft annealed c = article +M = thermo mechanical treated d = dimensions in tech. regulations +AR = not treated e = weight f = No. of tech. regulation g = PMA fort he use in pressure equipment




Scope


Annex I §4.3 EN 764-4 AD 2000-


No. 305/2011(System 2+)





Cur-




Dimensions Cur-




m from


6

S 235J2 (1.0117), S-235 JR (1.0038), S 275 JR (1.0044), S 275J2 (1.0145), S 355 J2 (1.0577)

EN 10025.2 +N BARS --- 26 AD 2000 W13 For materials, which required a VdTÜV Werkstoffblatt additional, a suitability check and 3.2 certificate required.

7 P 250 GH (1.0577) EN 10273 +N BARS --- 26 AD 2000 W13


8

16 Mo 3 (1.5415), 13 CrMo 44 (1.7335), 10 CrMo 9-10 (1.7380), P 355 NH (1.0565)

DIN 17243 +QT BARS --- 26 AD 2000 W13





Scope according to








Cur-



DeliveryCond.


Dimensions Cur-



* Thickness

*

mm fro

m from


9 25 CrMo4 (1.7218) EN 10269 +QT BARS --- 26 AD 2000 W 7For materials, which required a VdTÜV Werkstoffblatt additional, a suitability check and 3.2 certificate required.

10 21 CrMoV 5.7 (1.7709) EN 10269 +QT BARS --- 26 AD 2000 W 7 11 42 CrMo 4 (1.7225) EN 10269 +QT BARS --- 26 AD 2000 W 7






Scope according to







Location: E 01013 VITORIA (ARABA) Rev.: 5 of : 5 GmbH Cur



DeliveryCond.




* Thickness

*

mm fro

m from


12 X 20 Cr 13 1.4021 DIN17440 +QT BARS --- 26 DIN17440


13 24CrMo5 1.7258 DIN 17240 +QT BARS --- 26 DIN 17240 14 B7 ASTM A 193 +QT BARS --- 26 ASTM A 193 15 L7 ASTM A 320 +QT BARS --- 26 ASTM A 320 16 B16 ASTM A 193 +QT BARS --- 26 ASTM A 193

17

S 235J2 (1.0117), S-235 JR (1.0038), S 275 JR (1.0044), S 275J2 (1.0145), S 355 J2 (1.0577)

EN 10025-2 +N,+ AR BARS --- 26 EN 10025-2





Scope according to







Location: E 01013 VITORIA (ARABA) Rev.: 5 of : 5 GmbH Cur



DeliveryCond.




* Thickness

*

mm fro

m from


18

34 CrNiMo 6 (1.6582), 25 CrMo4 (1.7218), 42 CrMo 4 (1.7225)

EN 10083-3 +QT BARS --- 26 EN 10083-3




Annex to Certificate No. - Sidenor · PDF file9 25 CrMo4 (1.7218) EN 10269 +QT BARS 25 100 AD...

Documents

Transcript of Annex to Certificate No. - Sidenor · PDF file9 25 CrMo4 (1.7218) EN 10269 +QT BARS 25 100 AD...