Android

controlled

robot

kit(Arduino) Assembly guideline

V1.1 December , 2015

Introduction:

How does the robot work? :

Android controlled robot can be operated from any android device such as your android

supported mobile phone. All you have to do is, download and install a dedicated android

app in your mobile phone and send command to the robot from the mobile. The robot will

go forward, backward, left or right according to the command you send.

The kit consists of the following components:

Arduino Uno R3 (China) 1

PCB I Shape Stand 4

Cord Screw (Small) 8

L293 Dual DC Motor Controller 1

PCB I Shape Stand 4

Cord Screw (Small) 8

Male to Male Jumper Wire-Single 3

Male to Female Jumper Wire-Single 6

Bluetooth Module 1

Female to Female Jumper Wire-Single 1

Male to Female Jumper Wire-Single 3

Cable Tie (3X100mm) 2

DC Geared motors(120rpm) 4

Motor Supports (T-Type) 8

Wheel 4

Bolt M3*30 8

Nut M3*20 8

Rechargeable Battery Unit 1

Auto Charger 1

ON OFF Switch (5A, 250VAC) 1

Power Connector 1

Cable Tie (3X100mm) 1

Cable Tie (3X150mm) 1

Lighting System

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

3

Front LED Light 1

Back LED Light 1

PCB L Shape Stand 4

Cord Screw 6

Extra Parts

Male to Female Jumper Wire-Single 2

PCB L Shape Stand 2

Cord Screw 2

Cord Screw (Small) 4

PCB I Shape Stand 2

Others

Star Screw Driver 1

Robot Chassis (Arcylic, Transparent) 1

How to assemble the kit?

Step by step assembly guideline for the kit is shown below.

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

4

Step 1: Take the acrylic robot base.

Step 2: Fix the hexa spacers for Arduino board.

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

5

Step 3: Install the motors with the help of supportive screws and nuts.

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

6

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

7

Step 4: Fix the tires with the motors.

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

8

Step 5: Motor controller with stand.

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

9

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

10

Step 6: Front LED fixing

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

11

Step 7: Back LED lighting.

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

12

Step 8: Power switch fixing.

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

13

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

14

Step 8: Battery fixing with cable tie.

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

15

Step 9: Fixing Arduino board with chassis.

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

16

Step 10: Fixing Bluetooth module.

Batteries should be in series like this-

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

17

Step 11: Now programme your arduino, connect it to the motor driver,

Bluetooth modules and LEDs with jumpers.

N.B: The LEDs are added as the headlight of the car. The car can move

perfectly even if you do not connect them.

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

18

Step 12: Download any app for android robotic car control from google play

store and get started.

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

19

Charging the batteries:

Charge the batteries using auto charger. You have to charge the batteries

one by one as shown in the picture below.

TechShop, 39, ARA Bhaban, KaziNazrul Islam Avenue, Karwan Bazar, Dhaka-1215, Bangladesh

20