Anabond 7931 Aaf Tds
-
Upload
nanjappa-k-nuchumanianda -
Category
Documents
-
view
213 -
download
0
Transcript of Anabond 7931 Aaf Tds
-
8/10/2019 Anabond 7931 Aaf Tds
1/2
Anabond is a Registered Trademark | ed. 1
Product Description
Anabond 7931 AAF exhibits the followin
Part A Resin
Part B Hardener
Anabond 7931 AAF is a two-par
polyurethane system suitable for indu
bonding and potting the filter papers. I
for clean room air filter bonding applic
has a very good water resistance
dielectric strength. It adheres well t
substrates such as Aluminium, Ms, FR
Galvanized metals. Rate of cure is hig
on both temperature and humidi
components could be handled after 1-
35C for the next operation. System co
phosphate content to service pharma
industrial filter bonding applications.
Features The cured system has good aci
and excellent water resistance.
It is suitable for clean room appli
Colour Brown
Viscosity@251C, cPs 150-300
Specificgravity@251C
1.22 1.
Colour Off-white
Viscosity@251C, cPs 700 - 120
Specificgravity@251C
1.15 1.
-10102012/765987384263 1223
g properties:
t semi rigid
strial air filter
can be used
tions. It also
nd moderate
o a range of
P, Paper and
hly depended
ty. Potted
hours @ 30-
tains minimal
and biological
resistance
cations.
This system can be c
and oven (50 - 80C) It can be used for ma
applications.
Typical Use It is used for industrial It is suitable for clean
applications.
Application
By Automatic applicator:
Mix well Part A beforto soft sedimentatiostorage period to get
Mix Part A (Resin) &ratio ranging from 100weight.
Filter paper fixing tiwithin 240 secondshardener.
Storage condition
Store the material in its origin
- 35C in dry atmospherabsorption and crystallizatiready to use.
Packaging
Resin (Part A) 200 kgs in 200 liter M
coated drum
20 kgs in 20 Litre MS
coated drum
4
0
5
Anabond
7931 AAF
Page 1 of 2
red at RT (10 - 30C)
ual and automatic
air filter bonding.room filter bonding
mixing with Part B, duen in the resin duringerfect bonding.art B (Hardener) in the:28 to 100: 34 parts by
e would be preferredafter mixing resin and
al container between 25
to prevent moisturen. Do not open unti
narrow mouth epoxy
narrow mouth epoxy
Technical Data SheetApril, 2012
Total pages 2
-
8/10/2019 Anabond 7931 Aaf Tds
2/2
Anabond is a Registered Trademark | ed. 1-10102012/765987384263 1223 Page 2 of 2
Hardener (Part B) 200 / 240 kgs in 200 litrer MS narrow mouth
epoxy coated drum
20 kgs in 20 Litre MS narrow mouth epoxy
coated drum
Shelf life, unopened
180 days @ 25 - 35C
Mix Ratio
Processing Data (As Mixed)
Gel time: 20 35 minutes (@ 301C for 135 gms)
Typical physical properties
Hardness Shore A: 70 85
Chemical composition
Resin
It is based on medium molecular weight of polyesterpolyols and polyether polyols and it has only traces ofphosphorus to suit the clean room applications.
Hardener
It is based on low molecular weight of polymeric
methyl diphenyl isocyanate.
Handling precautions
Read material safety data sheet before usingproduct.
For industrial use only. Avoid contact with eyes, skin or clothing. Wear eye protection and impervious gloves
when handling. Avoid breathing vapor or dust. Keep container closed when not in use.
Disposal
Regular procedures approved by national localauthorities
Disclaimer
The data contained herein are furnished foinformation only and are believed to bereliable. We cannot assume responsibility for theresults obtained by others over whose methods wehave no control. It is the user's responsibility todetermine suitability for the user's purpose of anyproduction methods mentioned herein and to adopsuch precautions as may be advisable for theprotection of property and of persons against anyhazards that may be involved in the handling and usethereof.
For product information contact:
Anabond Limited36, Type II, Dr. VSI Estate,Thiruvanmiyur,Chennai 600041 IndiaPh: +91 (44) 23460041/42/43Fax: +91 (44) 2346 0048e-mail: [email protected]: www.anabond.com
System Parts by weight
Anabond 7931 AAF(Part A)
100
Anabond 7931 AAF(Part B)
28-34
Pot life, 130 gm mix 4 10 minutes @ 30
C