ANA Marine Limited, · Newcastle-upon-Tyne, NE6 4NT, United Kingdom Telephone: +44 (0) 191 276 6111...

ANA Marine Limited,

Unit B5 & B6 Benfield Business Park,

Benfield Road,

Newcastle-upon-Tyne,

NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222

Email: [email protected]

Web Address: www.anamarine.co.uk

The Directors of ANA Marine Limited established the company in 2000 for the purpose of designing and manufacturing marine air conditioning equipment, and

subsequently incorporated NORVENT marine air conditioning products into its

portfolio.

The Directors of ANA Marine Limited were previously employed by NORVENT,

a company which, for more than 50 years, have supplied air conditioning,

ventilation and refrigerating equipment to HVAC Contractors, Shipbuilders, and

Navies worldwide.

ANA Marine Limited equipment is to be found on many types of vessels, including

cruise liners, bulk carriers, container ships, FPSO’s, ferries and patrol vessels.

Our company and refrigeration engineers are F-gas certified.

ANA Marine Limited are approved by Lloyd’s Register Quality Assurance for

Applications Engineering and Assembly of air conditioning units to ISO 9001:2008

ANA Marine Limited,


Benfield Road,


NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222



Our in house facility is able to design

and manufacture bespoke air

conditioning units and equipment to

your specification.

Many featured can be incorporated

including:-

• Different duties & air flows

• Different air on / off conditions

• Non-standard voltages

• Remote compressor / condenser

section (split units)

• Units to fit a specific space

• Stainless steel casings

• Additional electrical requirements

e.g. alarms, lamps, remote start /

stop etc.

• Plus many other features.

Our bespoke air conditioning

equipment can be found on many

types of vessels including cruise

liners, bulk carriers, container ships,

FPSO’s, ferries and patrol vessels.

ANA Marine Limited,


Benfield Road,


NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222



• Nominal cooling loads 3.5 kW, 5.25 kW, 7.00 kW and 10.50 kW

• Sea water or Fresh water cooled through shell and tube condenser

• Refrigerant R407C

• Electro coated mild steel casing with powder coated paint finish

RAL 9018 (Grey)

• Removable top and side panels for access and maintenance

• Quick release grille for air filter cleaning and replacement

• Units supplied factory precharged only requiring suitable water and electrical

connections

• Electrical supply

• 220V 1ph 50/60Hz

• 380V 3ph 50Hz

• 440V 3ph 60Hz

• Other options available

• Colour to suit operating environment

• Electric heating

• Refrigerant R134a or R404A

• Fresh water plate heat exchanger

• See separate data sheet for air cooled VK units

ANA Marine Limited operate a policy of constant product

evaluation and improvement and we reserve the right to

make such changes as are found necessary to our

products to maintain our position as one of the world’s

leading marine air conditioning equipment manufacturers.

10/1

Nominal duties are based on air entering @ 25°Cdb @ 50% RH utilising R407c with sea water @ 32°C or fresh water @ 36°C

ANA Marine Limited,


Benfield Road,


NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222



PRODUCT CODE VK12 VK18 VK24 VK36

Nominal Cooling load (kW) 3.50 5.25 7.00 10.5

Nominal air flow - low (m³/h) 400 500 800 1200

- high (m³/h) 500 675 1000 1500

Fan Motor Rating (kW) 0.037 0.045 0.074 0.111

Fan Motor current (A) 0.85 1.10 1.70 2.55

Comp. motor power (kW) 1.76 2.30 4.40 4.39

Comp. motor current (A) 2.88 3.90 5.39 7.00

Nominal sea water qty. (m³/h) 0.43 1.3 2.74 5.46

Nominal Fresh water qty. (m³/h) 1.22 0.59 1.62 2.18

Unit dimensions H (mm) 450 550 550 650

W (mm) 760 760 1060 1360

D (mm) 380 380 380 400

Unit weight (Kg) 85 95 130 160

Electric Heating (Optional) (kW) 1.5 1.5 3.0 4.5

• Nominal cooling loads 3.5 kW, 5.25 kW and 7.0 kW

• Air Cooled

• Refrigerant R407c

• Internal section


RAL 9018 (Grey)

• External section

• Stainless steel 316 casing with 2 component Polyurethane paint finish

RAL 9018 (Grey)

• Condenser fan motors to IP56

• Cu/Cu condenser coil



• Close coupled Units supplied factory precharged


• 220V 1ph 50/60Hz

• 380V 3ph 50Hz

• 440V 3ph 60Hz


• Internal section stainless steel 316 casing with powder coated paint

finish RAL 9018 (Grey)


• Split system version


• Refrigerant R134a






10/18

Nominal duties are based on air entering @ 25°Cdb @ 50% RH utilising R407c and ambient air @ 40°C

ANA Marine Limited,


Benfield Road,


NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222



PRODUCT CODE VK12 VK18 VK24 VK36



- high (m³/h) 500 675 1000 1500

Evap. Fan motor rating (kW) 0.037 0.045 0.074 0.111


Cond. Fan motor rating (kW) 0.18 0.25 [email protected] [email protected]

Internal Unit dimensions H (mm) 450 550 550 650

W (mm) 760 760 1060 1360

D (mm) 380 380 380 400

External Unit dimensions H (mm) 500 600 600 900

W (mm) 840 840 1140 1200

D (mm) 460 460 460 700

Unit weight (Kg) 145 160 210 335

Electric Heating (Optional) (kW) 1.5 1.5 3.0 3.0






10/18

Illustration depicts unit with plenum and grille discharge

Nominal duties are based on air entering at 25°Cdb @ 50% RH utilising R407c with sea water @ 32°C or fresh water @ 36°C

• Nominal cooling loads 7.0 kW to 70.0 kW

• Sea water / fresh water cooled through shell and tube condenser


• Spigoted duct connection


RAL 9018 (Grey)

• Removable panels for access and maintenance


• Units supplied factory precharged only requiring suitable water and

electrical connections

• Electrical supply 380V 3ph 50Hz or 440V 3ph 60Hz

• TR02 to TR10 fitted with hermetic compressor

• TR15 & TR20 fitted with semi-hermetic compressors with capacity

control



• Fresh air connection

• Fan pressures to suit application


• Non-standared electric supply

• Plenum and grille discharge

• Air flow through base of unit (Downward discharge)

• Refrigerant R134a or R404a

• See separate data sheet for air cooled TR unitPRODUCT CODE TR02 TR03 TR05 TR08 TR10 TR15 TR20

Nominal Cooling load (kW) 7.0 10.5 17.5 28.0 35.0 56.0 70.0

Nominal air flow (m³/h) 1080 1530 2550 4075 5100 7725 10200

Plenium Discharge Fan motor rating (kW) 0.18 0.37 0.55 0.75 1.50 2.20 3.00

Plenium Discharge Fan motor Current (A) 0.57 1.03 1.44 1.9 3.45 4.7 6.2

Comp. motor power (kW) 4.40 4.50 8.10 11.40 13.90 20.60 23.60

Comp. motor current (A) 5.40 6.20 7.80 18.70 23.70 35.90 40.30

Nominal sea water quanity (m³/h) 2.70 2.71 11.60 8.10 4.00 10.25 14.00

Nominal fresh water quanity (m³/h) 1.58 1.29 2.10 3.51 3.91 10.19 14.77

Unit dimensions H (mm) 1300 1300 1600 1800 1800 2000 2100

W (mm) 900 900 900 1200 1250 1400 1800

D (mm) 450 450 550 650 650 850 850

P (mm) 110 120 180 230 230 300 330

Unit weight (kg) 169 195 250 315 365 560 670

Electric Heating (Optional) (kW) 1 x 3.0 1 x 4.5 2 x 4.5 2 x 9.0 2 x 9.0 3 x 9.0 4 x 9.0

ANA Marine Limited,


Benfield Road,


NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222



• Nominal cooling loads 10.5 kW to 70.0 kW• Air Cooled• Refrigerant R407c• TR02 to TR10 fitted with hermetic compressor• TR15 & TR20 fitted with semi-hermetic compressors with capacity

control• Internal section

• Electro coated mild steel casing with powder coated paint finish RAL 9018 (Grey)

• Removable panels for access and maintenance• Quick release grille for air filter cleaning and replacement

• External Section• Electro coated mild steel casing with 2 component

Polyurethane paint finish RAL 9018 (Grey) • Condenser coil with Cu tubes and Cu fins

• Electrical supply 380V 3ph 50Hz or 440V 3ph 60Hz• Other options available

• Colour to suit operating environment• Fan pressures to suit application• Electric heating• Non-standared electric supply• Refrigerant R134a• Horizontal air flow external section• Interconnecting piping cable• See separate data sheet for water cooled units






10/18

Nominal duties are based on air entering at 35°Cdb @ 50% RH utilising R407c with ambient air at 40°C

PRODUCT CODE TRA03 TRA05 TRA08 TRA10 TRA15 TRA20

Nominal Cooling load (kW) 10.5 17.5 28.0 35.0 56.0 70.0

Nominal air flow (Evaporating) (m³/h) 1530 2550 4075 5100 7725 10200

Plenum Discharge Fan motor rating (kW) 0.37 0.55 1.10 1.50 2.12 3.0

Comp. motor power (kW) 3.55 5.48 9.79 10.94 19.58 21.88

Nominal Condensing load (kW) 14.42 21.42 33.24 47.44 77.78 94.88

Nominal air flow (Condensing) (m³/h) 6624 9360 14400 21600 28080 37440

Condenser Fan motor rating (total) (Kw) 2 @ 0.37 2 @ 0.55 2 @ 0.75 3 @ 0.58 3 @ 0.75 4 @ 0.75

Electric Heating (Optional) (kW) 1 x 4.5 2 x 4.5 2 x 9.0 2 x 9.0 3 x 9.0 4 X 9.0

Internal Section

Unit dimensions H (mm) 1300 1600 1800 1800 2000 2100

W (mm) 900 900 1200 1250 1400 1800

D (mm) 450 550 650 650 850 850

P (mm) 120 180 230 230 300 330

Unit weight (kg) 178 219 284 328 501 594

External Section

Unit dimensions H (mm) 1380 1400 1420 1400 1420 1420

W (mm) 1200 1400 1700 2400 2600 3200

D (mm) 700 800 900 900 1100 1100

Unit weight (kg) 154 200 253 290 409 528

ANA Marine Limited,


Benfield Road,


NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222



Illustration depicts unit with plenum and grille discharge






10/18

Illustration depicts unit with optional plenum and grille discharge

Nominal duties are based on air entering at 25°Cdb @ 50% RH utilising R407c with fresh water @ 36°C


• Fresh water cooled through plate exchanger


• Spigoted duct connection


RAL 9018 (Grey)

• Removable front panel for access and maintenance



connections



• Sea water cooled through coaxial condenser



• Plenum and grille discharge

• Electric or hot water heating

• Fan pressure to suit application


• See separate data sheet for air cooled KW units

ANA Marine Limited,


Benfield Road,


NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222



PRODUCT CODE KW10 KW15 KW20 KW25

Nominal Cooling load (kW) 10 15 20 25

Nominal air flow (m³/h) 1500 2200 2950 3700



Comp. Current (A) 7.02 7.50 9.05 10.35

Nominal fresh water qty (m³/h) 2.41 3.45 4.56 6.01


W (mm) 550 700 700 800

D (mm) 550 750 750 750

P (mm) 150 200 225 245

Unit weight (kg) 186 234 282 309

Electric Heating (Optional) (kW) 1 x 4.5 2 x 4.5 2 x 6.0 2 x 9.0

• Nominal cooling loads 10 kW to 30 kW• Air Cooled• Refrigerant R407c• Internal section


• Removable panels for access and maintenance• Quick release grille for air filter cleaning and replacement

• External Section• Electro coated mild steel casing with 2 component

Polyurethane paint finish RAL 9018 (Grey) • Condenser coil with Cu tubes and Cu fins

• Electrical supply 380V 3ph 50Hz or 440V 3ph 60Hz• Other options available

• Colour to suit operating environment• Fan pressures to suit application• Electric heating• Non-stanadared electric supply• Refrigerant R134a• Horizontal air flow external section• Interconnecting piping cable• See separate data sheet for water cooled units






10/18

Nominal duties are based on air entering at 35°Cdb @ 50% RH utilising R407c with ambient air at 40°C

PRODUCT CODE KWA10 KWA15 KWA20 KWA25 KWA30

Nominal Cooling load (Kw) 10 15 20 25 30

Nominal air flow (Evaporating) (m³/h) 1500 2200 2950 3700 4800

Plenum Discharge Fan motor rating (Kw) 0.37 0.55 0.55 1.10 1.10

Comp. motor power (Kw) 3.55 5.48 5.48 9.79 9.79

Nominal Condensing load (Kw) 13.92 21.03 26.03 33.24 33.24

Nominal air flow (Condensing) (m³/h) 6624 8022 10670 14400 1440

Condenser fan motor rating (total) (Kw) 2 @ 0.37 2 @ 0.55 2 @ 0.55 2 @ 075 2 @ 0.75

Electric Heating (Optional) (Kw) 1 x 4.5 2 x 4.5 2 x 6.0 2 x 9.0 2 X 9.0

Internal Section

Unit dimensions H (mm) 1500 1700 1950 1950 1950

W (mm) 550 700 700 800 1000

D (mm) 550 750 750 750 750

P (mm) 150 200 225 245 270

Unit weight (Kg) 186 234 273 308 350

External Section

Unit dimensions H (mm) 1380 1400 1400 1420 1420

W (mm) 1200 1400 1400 1700 1700

D (mm) 700 800 800 900 900

Unit weight (Kg) 154 200 200 250 250

ANA Marine Limited,


Benfield Road,


NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222








10/18

Nominal duties are based on ambient air @ 40°C

Nominal duties are based on ambient air @ 40°C

• Electro coated mild steel casing with 2 component Polyurethane paint finish RAL

9018 (Grey)

• Condenser coil with Cu tubes and Cu fins


• Electric supply 380V 3ph 50Hz or 440V 3ph 60Hz


• Stainless steel 316 Casing

• Protective coating to coil

• ATEX II 2 G Eexd IIB T4 for hazardous areas


PRODUCT CODE ACCV3 ACCV5 ACCV8 ACCV10 ACCV15 ACCV20


Nominal air flow (m³/h) 6624 9360 14400 21600 28080 37440

Fan motor rating (total) (Kw) 2 @ 0.37 2 @ 0.55 2 @ 0.75 3 @ 0.58 3 @ 0.75 4 @ 0.75

Unit dimensions (Vertical) H (mm) 1380 1400 1420 1400 1420 1420

W (mm) 1200 1400 1700 2400 2600 3200

D (mm) 700 800 900 900 1100 1100

Unit weight (kg) 154 200 253 290 409 528

PRODUCT CODE ACCH3 ACCH5 ACCH8 ACCH10 ACCH15 ACCH20


Nominal air flow (m³/h) 6624 9360 14400 21600 28080 37440

Fan motor rating (total) (m³/h) 2 @ 0.37 2 @ 0.55 2 @ 0.75 3 @ 0.58 3 @ 0.75 4 @ 0.75

Unit dimensions (Horizontal) H (mm) 900 1000 1100 1100 1300 1300

W (mm) 1200 1400 1700 2000 2600 3200

D (mm) 700 700 700 700 700 700

Unit weight (kg) 174 216 287 330 449 558

ANA Marine Limited,


Benfield Road,


NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222








10/18

Nominal duties are based on air entering @ 25°Cdb @ 50% RH utilising R407c with ambient air @ 40°C

PRODUCT CODE FP12 FP18 FP24

Nominal Cooling load (kW) 3.50 5.25 7.00

Nominal air flow - low (m³/h) 400 500 800

- high (m³/h) 500 675 1000

Evap. Fan motor rating (kW) 0.037 0.045 0.074

Comp. motor power (kW) 1.87 2.28 2.89

Cond. Fan motor rating (kW) 0.18 0.25 [email protected]

Unit dimensions H (mm) 450 550 550

W (mm) 760 760 1060

Unit weight (kg) 125 135 195

Electric Heating (Optional) (kW) 1.5 1.5 3.0

• Nominal cooling loads 3.5 kW, 5.25 kW and 7.0 kW

• Air Cooled


• A60 class fire resistant division between internal and external

section

• Internal section

• Suitable for non-hazardous area

• Electro coated mild steel casing with powder coated

paint finish RAL 9018 (Grey)

• External section

• ATEX II 2 G EEx d IIB T4 suitable for hazardous area

• Cu/Cu condenser coil

• Stainless steel 316 casing with 2 component

Polyurethane paint finish RAL 9018 (Grey)



• Close coupled units supplied factory precharged


• 220V 1ph 50/60Hz

• 380V 3ph 50Hz

• 440V 3ph 60Hz






ANA Marine Limited,


Benfield Road,


NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222








10/18

Nominal duties are based on 100% fresh air entering at 35°Cdb @ 70% RH (Summer) and -25°C (Winter) utilising R407c with fresh water @ 36°C

PRODUCT CODE KWG10 KWG15 KWG20 KWG25

Nominal Cooling load (kW) 10.0 15.0 20 25

Nominal heating load (m³/h) 9.0 12.0 13.5 18.0

Nominal Air Flow (m³/h) 600 700 1100 1550

External pressure (kW) 600 600 600 600



Nominal water qty. (m³/h) 1.08 1.56 3.12 3.70


W (mm) 550 700 700 700

D (mm) 550 750 750 750

Unit weight (kg) 230 320 340 370

• Unit designed to meet SOLAS 2000 requirement


• Fresh water cooled through plate heat exchanger


• Ducted, filtered rear inlet and vertical discharge


• Removable panels for access and maintenance


connections




• Stainless steel 316 casing with powder coated paint finish

RAL 9018 (Grey)


• Alternative fan pressures


• Hot water heating


• Seawater cooled through coaxial condenser

• Air cooled

ANA Marine Limited,


Benfield Road,


NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222



Nominal duties are based on air entering at 25°Cdb @ 50% and CW 6°C – 12°C






10/18

• Normal Cooling loads 10 kW to 70 kW

• Duct connection


• Removable front panels for access and maintenance


• Electric supply 380V 3ph 50Hz, 440V 3ph 60Hz, 220V/1ph/50Hz, 230V/1ph/60Hz


• Plenum and Grille discharge

• Controls pack including:-

• built in 3 way valves

• Actuators

• Control unit

• thermostatically controlled

• Set point adjuster on front of unit


• Alternative fan pressures

• Electric or hot water Heating


• Stainless steel casing

Illustration depicts unit with optional plenum and grille discharge

ANA Marine Limited,


Benfield Road,


NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222



PRODUCT CODE FC10 FC15 FC20 FC25 FC30 FC40 FC50 FC70

Nominal Cooling load (kW) 10 15 20 25 30 40 50 70

Nominal air flow (m³/h) 1600 2600 3600 4500 4800 6300 8000 11250

Nominal Water Flow (l/s) 0.4 0.6 0.79 1.00 1.19 1.59 1.98 2.78

Pressure drop (kPa) 41 47 47 48 49 48 50 49

Fan Motor Rating (kW) 0.37 0.55 0.75 1.10 1.10 1.50 1.50 2.20

Unit dimensions H (mm) 1500 1750 1750 1750 1750 1750 2000 2000

W (mm) 500 700 700 700 700 1200 1200 1500

D (mm) 500 750 750 750 750 750 750 750

P (mm) 260 270 330 340 340 340 400 450

Unit weight (kg) 121 168 185 205 221 278 303 372

Electric Heating (Optional) (kW) 4.5 9 12 12 12 18 18 18

Nominal duties are based on air entering at 25°Cdb @ 50% and CW 6°C – 12°C






10/18

• Normal Cooling loads 2.5kW to 7.0 kW




• Electric supply 380V 3ph 50Hz, 440V 3ph 60Hz, 220V/1ph/50Hz, 230V/1ph/60Hz


• Controls pack including:-

• built in 3 way valves

• Actuators

• Control unit

• thermostatically controlled

• Set point adjuster on front of unit


• Stainless steel casing

ANA Marine Limited,


Benfield Road,


NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222



PRODUCT CODE FC-VK12 FC-VK18 FC-VK24 FC-VK36



- high (m³/h) 500 675 1000 1500


Fan Motor current (A) 0.85 1.10 1.70 2.55

Water In (°C) 6 6 6 6

Water Out (°C) 12 12 12 12.00

Nominal water flow (l/s) 0.14 0.24 0.28 0.42

Pressure drop (kPa) 25 32 27 41


W (mm) 760 760 1060 1360

D (mm) 380 380 380 400

Unit weight (Kg) 55 60 75 105

Illustration depicts unit with optional control pack






10/18

Removable discharge grille for

Vertical or horizontal deflection

Removable intake grille for

Access and replacement of

filters

4 B

ulk

he

ad

mo

un

tin

g h

ole

s

8ø

@ 5

00

x 3

50

crs

510mm

740

mm

305mm

80

mm

• The Clearstar CL 300 reduces tobacco smoke

concentration, odours and other airborne contaminates

• Environmentally friendly, being non-electrostatic there is

no increase in low level ozone in the atmosphere

• 3-stage filter assembly, comprising prefilter, ultra filter

and activated carbon filter

• 3-speed fan operation low, medium and boost

• The Clearstar CL300 under normal conditions will

effectively deal with a compartment of approx 50m3

• Electric supply 110v 1ph 60Hz or 220v 1ph 60Hz

• Weight 35kg

ANA Marine Limited,


Benfield Road,


NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222



• Suitable for marine and industrial applications

• Local control of both air direction and air volume

• Can be used to provide a jet of air, or by rotating

sphere 180°, a diffused air flow is achieved

• Manufactured in three standard colours:

• Ivory RAL 1013

• White RAL 9010

• Grey RAL 7035

• Black RAL 8022

• Other RAL colours available subject to

minimum quantities

• Manufactures in four sizes B, C, D and E

ANA Norvent Limited operate a policy of constant product





10/18

The nominal capacities given are based on the two pressures we recommend, 125 Pa for normal systems, or 75 Pa for systems where quiet operation is requires

Directional Jet Air Flow Diffused Air Flow

Size Nominal Minimum Holes Code

(m3/s) (m3/s) Outlet Depth No. Size PCD

125 Pa 75 Pa Diameter of Duct X Y Z (mm) (mm)

B 0.017 0.013 51mm 76mm 111 70 149 3 5 127 B-DPAD

C 0.03 0.023 64mm 90mm 127 83 165 3 5 143 C-DPAD

D 0.045 0.035 76mm 102mm 143 92 181 4 5 159 D-DPAD

E 0.062 0.047 90mm 114mm 156 102 194 4 5 171 E-DPAD

Nominal Capacity Dimensions (mm) Fixing

ANA Norvent Limited,


Benfield Road,


NE6 4NT,

United Kingdom

Telephone: +44 (0) 191 276 6111

Fax: +44 (0) 191 276 6222


Web Address: www.ananorvent.co.uk

ANA Marine Limited, · Newcastle-upon-Tyne, NE6 4NT, United Kingdom Telephone: +44 (0) 191 276 6111...

Documents

Transcript of ANA Marine Limited, · Newcastle-upon-Tyne, NE6 4NT, United Kingdom Telephone: +44 (0) 191 276 6111...