document Part Number SL10700B visit us at www.inTESTthermal.comISO 9001 Certified

© 2014 inTEST Thermal Solutions. THERMOSTREAM® is a registered trademark of Temptronic Corporation. These specifications are valid for standard products only and are subject to change without notice. Applications requiring modifications of the mechanical, thermal, or electrical characteristics should be discussed with the factory for possible accommodations at additional costs.

inTEST Thermal Solutions is a division of inTEST Corporation (NASDAQ: INTT) inTEST Corporate Headquarters804 East Gate DriveSuite 200Mount Laurel, NJ 08054

North America41 Hampden Road

Mansfield, MA 02048USA

T: +1.781.688.2300F: +1.781.688.2301

EuropeGewerbeparkring 18D-15299 Muellrose

GermanyT: +49.33606.77700F: +49.33606.77701

AsiaBlock 4010 TechPlace 1

#05-02Ang Mo Kio Ave 10

SingaporeT: +65.6552.2404F: +65.6552.2414F: +65.6552.2414

inTEST Thermal Solutions Worldwide Sales & Service

The inTEST Thermal family includes three temperature-related corporations Sigma Systems, Temptronic and Thermonics. We specialize in creating thermal environments for temperature testing, temperature conditioning and process cooling requirements. Solutions include temperature forcing units, thermal chambers and platforms, and process chillers. Overall, these high throughput solutions combine extreme thermal environments, -185 to +500°C, and rapid transitions between desired temperatures.

Factory Direct Service Centers

Worldwide Sales & Service Centers

Local Offices

inTEST Thermalan inTEST Company

high speed thermal testing and conditioning

Optimizing throughput for lab and production applications

PRECISION TEMPERATURE SOURCES

ATS THERMOSTREAM® SYSTEMS

inTEST Thermal Solutions

CORPORATION

inTEST Thermal Solutions

CORPORATION

inTEST Thermalan inTEST Company

TEMPERATURE RANGE-80°C to +225°C -90°C to +225°C high capacity -90°C to +300°C high temp, high capacity

-100°C to +225°C ultra-low temp

MODELATS - 710ATS - 730ATS - 750ATS - 770

TEMPERATURE RANGE-20°C to +225°C -45°C to +225°C -60°C to +225°C-60°C to +225°C-80°C to +225°C

MODELATS - 505ATS - 515ATS - 525ATS - 535*ATS - 545

* includes air compressor and dryer system (no external air required)

ATS-545-MATS-525

ATS-505

The ATS 700 Series Models are available with a mechanical, articulated arm or a Turret for use with separate enclosures and chambers. Optionally, the mechanical arm can be equipped with an extended height feature.

“Improve throughput with systems capable of transition rates up to 18°C per second”

ATS-700 Series Temperature Forcing SystemsThe ATS-700 family includes high-capacity systems for maximum throughput by accelerating time to temperature. They are also used for higher power and larger mass subjects at or beyond MIL-STD temperatures.

ATS-710-M

ATS-730-T

Increase Throughput

Convenient Operation• Remote control• No LN2 required• Extended reach to accommodate your test heads• Power saver feature during idle periods

• Ultimate low down to -100°C• Ultimate high up to +300°C• Rapid temperature cycling up to 18°C/sec• Enclosures for components and PCBs

“ A variety of systems designedto meet Commercial and Military Temperature Test Requirements ”

ATS-500 Series Temperature Forcing SystemsThe ATS-500 family includes systems that use a compressed air source and those that operate independent of an external air supply.

Rapid Temperature Forcing with ATSThermostream® SystemsThermostreams are mobile temperature control systems for high-speed thermal testing and verification of electronic components, sensors and PCBs. The ATS series brings temperature to the test site by directing a stream of cooled or heated air, reaching temperatures between -100and +300and +300°C very quickly. These systems provide high-throughput for small-mass test subjects in both lab and production applications.

Configurations are available – from bench top to high heat capacity systems – with a variety of enclosures to isolate the device under test. Temperature controls provide convenient setup and operation to run complex thermal cycling with inputs from a variety of sensor types (thermocouple, RTD, or diode). Run temperature testing routines with front panel or remote control via standard communications protocols.

TEMPERATURE RANGE-80°C to +225°C -90°C to +225°C high capacity -90°C to +300°C high temp, high capacity

-100°C to +225°C ultra-low temp

MODELATS - 710ATS - 730ATS - 750ATS - 770

TEMPERATURE RANGE-20°C to +225°C -45°C to +225°C -60°C to +225°C-60°C to +225°C-80°C to +225°C

MODELATS - 505ATS - 515ATS - 525ATS - 535*ATS - 545

* includes air compressor and dryer system (no external air required)

ATS-545-MATS-525

ATS-505

The ATS 700 Series Models are available with a mechanical, articulated arm or a Turret for use with separate enclosures and chambers. Optionally, the mechanical arm can be equipped with an extended height feature.

“Improve throughput with systems capable of transition rates up to 18°C per second”

ATS-700 Series Temperature Forcing SystemsThe ATS-700 family includes high-capacity systems for maximum throughput by accelerating time to temperature. They are also used for higher power and larger mass subjects at or beyond MIL-STD temperatures.

ATS-710-M

ATS-730-T

Increase Throughput

Convenient Operation• Remote control• No LN2 required• Extended reach to accommodate your test heads• Power saver feature during idle periods

• Ultimate low down to -100°C• Ultimate high up to +300°C• Rapid temperature cycling up to 18°C/sec• Enclosures for components and PCBs

“ A variety of systems designedto meet Commercial and Military Temperature Test Requirements ”

ATS-500 Series Temperature Forcing SystemsThe ATS-500 family includes systems that use a compressed air source and those that operate independent of an external air supply.

Rapid Temperature Forcing with ATSThermostream® SystemsThermostreams are mobile temperature control systems for high-speed thermal testing and verification of electronic components, sensors and PCBs. The ATS series brings temperature to the test site by directing a stream of cooled or heated air, reaching temperatures between -100and +300and +300°C very quickly. These systems provide high-throughput for small-mass test subjects in both lab and production applications.

Configurations are available – from bench top to high heat capacity systems – with a variety of enclosures to isolate the device under test. Temperature controls provide convenient setup and operation to run complex thermal cycling with inputs from a variety of sensor types (thermocouple, RTD, or diode). Run temperature testing routines with front panel or remote control via standard communications protocols.

document Part Number SL10700B visit us at www.inTESTthermal.comISO 9001 Certified

© 2014 inTEST Thermal Solutions. THERMOSTREAM® is a registered trademark of Temptronic Corporation. These specifications are valid for standard products only and are subject to change without notice. Applications requiring modifications of the mechanical, thermal, or electrical characteristics should be discussed with the factory for possible accommodations at additional costs.

inTEST Thermal Solutions is a division of inTEST Corporation (NASDAQ: INTT) inTEST Corporate Headquarters804 East Gate DriveSuite 200Mount Laurel, NJ 08054

North America41 Hampden Road

Mansfield, MA 02048USA

T: +1.781.688.2300F: +1.781.688.2301

EuropeGewerbeparkring 18D-15299 Muellrose

GermanyT: +49.33606.77700F: +49.33606.77701

AsiaBlock 4010 TechPlace 1

#05-02Ang Mo Kio Ave 10

SingaporeT: +65.6552.2404F: +65.6552.2414F: +65.6552.2414

inTEST Thermal Solutions Worldwide Sales & Service

The inTEST Thermal family includes three temperature-related corporations Sigma Systems, Temptronic and Thermonics. We specialize in creating thermal environments for temperature testing, temperature conditioning and process cooling requirements. Solutions include temperature forcing units, thermal chambers and platforms, and process chillers. Overall, these high throughput solutions combine extreme thermal environments, -185 to +500°C, and rapid transitions between desired temperatures.

Factory Direct Service Centers

Worldwide Sales & Service Centers

Local Offices

inTEST Thermalan inTEST Company

high speed thermal testing and conditioning

Optimizing throughput for lab and production applications

PRECISION TEMPERATURE SOURCES

ATS THERMOSTREAM® SYSTEMS

inTEST Thermal Solutions

CORPORATION

inTEST Thermal Solutions

CORPORATION

inTEST Thermalan inTEST Company